Roger Oberholtzer wrote:
setserial -g /dev/ttyUSB*
/dev/ttyUSB0, UART: unknown, Port: 0x0000, IRQ: 0, Flags: low_latency /dev/ttyUSB1, UART: unknown, Port: 0x0000, IRQ: 0, Flags: low_latency /dev/ttyUSB2, UART: unknown, Port: 0x0000, IRQ: 0, Flags: low_latency /dev/ttyUSB3, UART: unknown, Port: 0x0000, IRQ: 0, Flags: low_latency
Is this what setserial should report for this type of serial port? Maybe it does not work with USB serial ports?
Well, at least this output is normal - I get the same here for a 4-port USB-to-serial box, and it works, talking to two devices...
I am trying to diagnose a Linux kernel boot problem with a diskless openSUSE 11.2 system at a remote location. I have used the ever popular kernel command line option on the remote:
console=ttyS1,38400n8 splash=0 textmode=1
Hmm, bad connection with a too high baudrate? Have you tried with a lower setting? Pit -- Dr. Peter "Pit" Suetterlin http://www.astro.su.se/~pit Institute for Solar Physics Tel.: +34 922 405 590 (Spain) P.Suetterlin@royac.iac.es +46 8 5537 8507 (Sweden) Peter.Suetterlin@astro.su.se -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org