Friends, I install 11.1 for several days, in last few days my system cant be acces in the morning, I can ping to it, but I cannot ssh and samba didnt work. When I check /var/log/messages, I some errors. Then after I restart, i see almost same errors (you can see it bellow). I that because of Hardware failure ? my Hardisk ? I have 2 disk, 1 with SATA (/dev/sda), 1 with IDE (/dev/sdb). regards, linux-gkfg:/home/arie # mount /dev/sdb5 on / type ext3 (rw,acl,user_xattr) /proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) debugfs on /sys/kernel/debug type debugfs (rw) udev on /dev type tmpfs (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/sda1 on /back type ext3 (rw,acl,user_xattr) /dev/sdb1 on /boot type ext2 (rw,acl,user_xattr) /dev/sdb6 on /home type xfs (rw) fusectl on /sys/fs/fuse/connections type fusectl (rw) securityfs on /sys/kernel/security type securityfs (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) gvfs-fuse-daemon on /home/arie/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=arie) /var/log/messages/ Feb 9 21:00:01 linux-gkfg /usr/sbin/cron[4959]: (root) CMD (/root/bin/backup.sh) Feb 9 21:19:39 linux-gkfg smartd[3757]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 65 to 66 Feb 9 21:19:39 linux-gkfg smartd[3757]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 35 to 34 Feb 9 21:19:40 linux-gkfg smartd[3757]: Device: /dev/sdb [SAT], 1 Currently unreadable (pending) sectors Feb 9 21:19:40 linux-gkfg smartd[3757]: Device: /dev/sdb [SAT], 1 Offline uncorrectable sectors Feb 9 21:39:40 linux-gkfg -- MARK -- Feb 9 21:49:37 linux-gkfg syslog-ng[2018]: Log statistics; dropped='pipe(/dev/xconsole)=0', dropped='pipe(/dev/tty10)=0', processed='center(queued)=22', processed='center(received)=14', processed='destination(newsnotice)=0', processed='destination(acpid)=0', processed='destination(firewall)=0', processed='destination(null)=0', processed='destination(mail)=0', processed='destination(mailinfo)=0', processed='destination(console)=1', processed='destination(newserr)=0', processed='destination(newscrit)=0', processed='destination(messages)=14', processed='destination(mailwarn)=0', processed='destination(localmessages)=1', processed='destination(netmgm)=0', processed='destination(mailerr)=0', processed='destination(xconsole)=1', processed='destination(warn)=5', processed='source(src)=14' Feb 9 21:49:39 linux-gkfg smartd[3757]: Device: /dev/sda [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 109 to 111 Feb 9 21:49:39 linux-gkfg smartd[3757]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 66 to 65 Feb 9 21:49:39 linux-gkfg smartd[3757]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 34 to 35 Feb 9 21:49:39 linux-gkfg smartd[3757]: Device: /dev/sdb [SAT], 1 Currently unreadable (pending) sectors Feb 9 21:49:39 linux-gkfg smartd[3757]: Device: /dev/sdb [SAT], 1 Offline uncorrectable sectors Feb 9 22:09:39 linux-gkfg -- MARK -- Feb 10 08:38:14 linux-gkfg syslog-ng[2035]: syslog-ng starting up; version='2.0.9' Feb 10 08:38:14 linux-gkfg rchal: CPU frequency scaling is not supported by your processor. After I restart (press reset button cause I cannot login to it), I saw these too. Feb 10 08:38:30 linux-gkfg smartd[3607]: Opened configuration file /etc/smartd.conf Feb 10 08:38:30 linux-gkfg smartd[3607]: Drive: DEVICESCAN, implied '-a' Directive on line 26 of file /etc/smartd.conf Feb 10 08:38:30 linux-gkfg smartd[3607]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices Feb 10 08:38:30 linux-gkfg smartd[3607]: Device: /dev/sda, type changed from 'scsi' to 'sat' Feb 10 08:38:30 linux-gkfg smartd[3607]: Device: /dev/sda [SAT], opened Feb 10 08:38:30 linux-gkfg smartd[3607]: Device: /dev/sda [SAT], found in smartd database. Feb 10 08:38:30 linux-gkfg smartd[3607]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list. Feb 10 08:38:30 linux-gkfg smartd[3607]: Device: /dev/sda [SAT], state read from /var/lib/smartmontools/smartd.ST380211AS-5PS17R71.ata.state Feb 10 08:38:30 linux-gkfg smartd[3607]: Device: /dev/sdb, type changed from 'scsi' to 'sat' Feb 10 08:38:30 linux-gkfg smartd[3607]: Device: /dev/sdb [SAT], opened Feb 10 08:38:30 linux-gkfg smartd[3607]: Device: /dev/sdb [SAT], found in smartd database. Feb 10 08:38:31 linux-gkfg smartd[3607]: Device: /dev/sdb [SAT], is SMART capable. Adding to "monitor" list. Feb 10 08:38:31 linux-gkfg /usr/sbin/cron[3669]: (CRON) STARTUP (V5.0) Feb 10 08:38:31 linux-gkfg smartd[3607]: Device: /dev/sdb [SAT], state read from /var/lib/smartmontools/smartd.ST380011A-5MS0WCCX.ata.state Feb 10 08:38:31 linux-gkfg smartd[3607]: Monitoring 2 ATA and 0 SCSI devices Feb 10 08:38:31 linux-gkfg kernel: eth0: no IPv6 routers present Feb 10 08:38:31 linux-gkfg smartd[3607]: Device: /dev/sda [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 111 to 120 Feb 10 08:38:31 linux-gkfg smartd[3607]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 65 to 68 Feb 10 08:38:31 linux-gkfg smartd[3607]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 35 to 32 Feb 10 08:38:31 linux-gkfg smartd[3607]: Device: /dev/sda [SAT], SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 47 to 73 Feb 10 08:38:32 linux-gkfg smartd[3607]: Device: /dev/sdb [SAT], 1 Currently unreadable (pending) sectors Feb 10 08:38:32 linux-gkfg smartd[3607]: Device: /dev/sdb [SAT], 1 Offline uncorrectable sectors Feb 10 08:38:32 linux-gkfg smartd[3607]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 61 to 63 Feb 10 08:38:32 linux-gkfg smartd[3607]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 32 to 29 Feb 10 08:38:32 linux-gkfg smartd[3607]: Device: /dev/sdb [SAT], SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 61 to 63 Feb 10 08:38:32 linux-gkfg smartd[3607]: Device: /dev/sda [SAT], state written to /var/lib/smartmontools/smartd.ST380211AS-5PS17R71.ata.state Feb 10 08:38:32 linux-gkfg smartd[3607]: Device: /dev/sdb [SAT], state written to /var/lib/smartmontools/smartd.ST380011A-5MS0WCCX.ata.state Feb 10 08:38:32 linux-gkfg smartd[3691]: smartd has fork()ed into background mode. New PID=3691. Feb 10 08:38:32 linux-gkfg sshd[3722]: Server listening on 0.0.0.0 port 22. Feb 10 08:38:32 linux-gkfg sshd[3722]: Server listening on :: port 22. Feb 10 08:38:33 linux-gkfg kernel: Not cloning cgroup for unused subsystem ns Feb 10 08:39:53 linux-gkfg pulseaudio[4270]: pid.c: Stale PID file, overwriting. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org