Hi, I installed a PCI-to-PCMCIA card. When I insert a PCMCIA-card in it this is detected (tail messages) but what's next ? I was hoping that my SSD-card would appear as a media device, just like a USB-drive would. I hope you don't mind that I include some diagnostics I made. I removed thing I thought were not relevant to the problem, but I can provide the whole text if needed. I googled but the results are old and mostly for network cards. I hope anyone can help. I'm running OS 11.1 and the machine. -- Met vriendelijke groeten, Koenraad Lelong Yenta: CardBus bridge found at 0000:05:00.0 [0000:0000] Yenta: ISA IRQ mask 0x0000, PCI irq 21 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#05) from #06 to #09 pcmcia: parent PCI bridge I/O window: 0xa000 - 0xbfff pcmcia: parent PCI bridge Memory window: 0xfe200000 - 0xfeafffff pcmcia: parent PCI bridge Memory window: 0xddf00000 - 0xdfefffff pccard: PCMCIA card inserted into slot 0 pccard: card ejected from slot 0 pccard: PCMCIA card inserted into slot 0 pccard: card ejected from slot 0 pccard: PCMCIA card inserted into slot 0 pccard: card ejected from slot 0 pccard: PCMCIA card inserted into slot 0 pccard: card ejected from slot 0 pccard: PCMCIA card inserted into slot 0 pccard: card ejected from slot 0 pccard: PCMCIA card inserted into slot 0 pccard: card ejected from slot 0 pccard: PCMCIA card inserted into slot 0 pccard: card ejected from slot 0 pccard: PCMCIA card inserted into slot 0 pccard: card ejected from slot 0 pccard: PCMCIA card inserted into slot 0 pccard: card ejected from slot 0 87: udi = '/org/freedesktop/Hal/devices/pci_1180_475' pci.subsys_product_id = 0 (0x0) linux.subsystem = 'pci' info.subsystem = 'pci' info.linux.driver = 'yenta_cardbus' pci.subsys_vendor_id = 0 (0x0) info.product = 'RL5c475' pci.device_class = 6 (0x6) info.udi = '/org/freedesktop/Hal/devices/pci_1180_475' pci.device_subclass = 7 (0x7) pci.device_protocol = 0 (0x0) pci.vendor = 'Ricoh Co Ltd' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:05:00.0' info.vendor = 'Ricoh Co Ltd' info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e' pci.product = 'RL5c475' pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:05:00.0' pci.product_id = 1141 (0x475) pci.vendor_id = 4480 (0x1180) linux.hotplug_type = 2 (0x2) <6>Yenta: CardBus bridge found at 0000:05:00.0 [0000:0000] <6>Yenta: ISA IRQ mask 0x0000, PCI irq 21 <6>Socket status: 30000006 <6>Yenta: Raising subordinate bus# of parent bus (#05) from #06 to #09 <6>pcmcia: parent PCI bridge I/O window: 0xa000 - 0xbfff <6>pcmcia: parent PCI bridge Memory window: 0xfe200000 - 0xfeafffff <6>pcmcia: parent PCI bridge Memory window: 0xddf00000 - 0xdfefffff
pcmcia.1: sysfs drivers pcmcia.2: pcmcia sysfs: no such bus: pcmcia pcmcia.3: pcmcia ctrl sysfs: no such class: pcmcia_socket
----- /proc/interrupts ----- 21: 19 0 IO-APIC-fasteoi yenta ----- /proc/interrupts end ----- ----- sysfs driver list (id 0xc68225b4804ab889) ----- yenta_cardbus: /devices/pci0000:00/0000:00:1e.0/0000:05:00.0 yenta_cardbus: module = yenta_socket ----- sysfs driver list end ----- ----- misc resources ----- irq:0 21 ( 19) "yenta" ----- misc resources end ----- ----- /proc/modules ----- yenta_socket 26404 1 - Live 0xffffffffa0a01000 rsrc_nonstatic 10920 1 yenta_socket, Live 0xffffffffa09c0000 pcmcia_core 39140 2 yenta_socket,rsrc_nonstatic, Live 0xffffffffa018d000 ----- /proc/modules end ----- 35: PCI 500.0: 0607 CardBus bridge [Created at pci.318] UDI: /org/freedesktop/Hal/devices/pci_1180_475 Unique ID: Ddhb.Y5N1lVJRpe3 Parent ID: 6NW+.NiX3vIdArFF SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:05:00.0 SysFS BusID: 0000:05:00.0 Hardware Class: bridge Model: "Ricoh RL5c475" Vendor: pci 0x1180 "Ricoh Co Ltd" Device: pci 0x0475 "RL5c475" Revision: 0x81 Driver: "yenta_cardbus" Driver Modules: "yenta_socket" Memory Range: 0xfe200000-0xfe200fff (rw,non-prefetchable) IRQ: 21 (19 events) Module Alias: "pci:v00001180d00000475sv00000000sd00000000bc06sc07i00" Driver Info #0: Driver Status: yenta_socket is active Driver Activation Cmd: "modprobe yenta_socket" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #26 (PCI bridge) Module Size Used by yenta_socket 26404 0 rsrc_nonstatic 10920 1 yenta_socket pcmcia_core 39140 2 yenta_socket,rsrc_nonstatic 05:00.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 81) Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:05:00.0) Configuration: state: on ready: yes Available IRQs: none Available ioports: 0x0000a000 - 0x0000bfff Available iomem: 0xddf00000 - 0xdfefffff 0xfe200000 - 0xfeafffff Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:05:00.0) Configuration: state: on ready: yes Voltage: 3.3V Vcc: 3.3V Vpp: 3.3V Available IRQs: none Available ioports: 0x0000a000 - 0x0000bfff Available iomem: 0xddf00000 - 0xdfefffff 0xfe200000 - 0xfeafffff