Mailinglist Archive: opensuse (3618 mails)

< Previous Next >
Re: [opensuse] Boot error with kernel 2.6.22.19-0.1 or later
  • From: Scott Simpson <simpson100@xxxxxxxxx>
  • Date: Sun, 25 Jan 2009 03:20:26 -0800
  • Message-id: <79759ec90901250320t6ef81debt65f7a211df6464e1@xxxxxxxxxxxxxx>
My root partition is on /dev/sda2 (/boot is on /dev/sda1) and all the
lines in my /boot/grub/menu.lst file contain "root=/dev/sda2" on the
kernel boot line so that looks OK. My /boot/grub/device.map contains

(fd0) /dev/fd0
(hd0) /dev/sda

My /etc/grub.conf file contains

root (hd0,0)
install --stage2=/boot/grub/stage2 /grub/stage1 (hd0) /grub/stage2
0x8000 (hd0,0)/grub/menu.lst
install --stage2=/boot/grub/stage2 /grub/stage1 (hd0,0) /grub/stage2
0x8000 (hd0,0)/grub/menu.lst
quit

I'm using a regular IDE hard drive. The /etc/grub.conf specifies hd0
but my system shows the drive as /dev/sda. I assume that is OK. My
dmesg boot lines are

ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00014000 irq 14
ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00014008 irq 15
ata1.00: ATA-4: IBM-DPTA-372050, P76OA30A, max UDMA/66
ata1.00: 40088160 sectors, multi 16: LBA
ata1.01: ATA-7: HDT722525DLAT80, V44OA96A, max UDMA/133
ata1.01: 488397168 sectors, multi 16: LBA48
ata1.00: configured for UDMA/66
ata1.01: configured for UDMA/133
ata2.00: ATA-6: WDC WD600BB-00DKA0, 77.07W77, max UDMA/100
ata2.00: 117231408 sectors, multi 16: LBA48
ata2.01: ATAPI: TDK DVDRW420N, 1.3A, max UDMA/33
ata2.00: configured for UDMA/100
ata2.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA IBM-DPTA-372050 P76O PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access ATA HDT722525DLAT80 V44O PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA WDC WD600BB-00DK 77.0 PQ: 0 ANSI: 5
scsi 1:0:1:0: CD-ROM TDK DVDRW420N 1.3A PQ: 0 ANSI: 5
ACPI: Fan [FAN] (on)
BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
sd 0:0:0:0: [sda] 40088160 512-byte hardware sectors (20525 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 40088160 512-byte hardware sectors (20525 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx

< Previous Next >