Mailinglist Archive: opensuse (3441 mails)

< Previous Next >
[opensuse] happy "dmraid" at boot
  • From: Yas say <baladeh@xxxxxxxxx>
  • Date: Sat, 17 Jan 2009 18:40:03 -0800 (PST)
  • Message-id: <51685.9394.qm@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
so last night i said to myself: forza mano di armato, il tigre!

Got couple of hints from Redhat and Ubuntu threads. Well Redhat makes dmraid:
http://people.redhat.com/~heinzm/sw/dmraid, and to my surprise, the Ubuntu
dmraid maintainer uses the same Raid motherboard i have:
https://www.redhat.com/archives/ataraid-list/2009-January/msg00008.html

It took me couple of hours to recompile kernel, add modules, make initrd and
execute the final stage. Also did for soundcard.

And I did not want to miss "AC Milan Vs Fiorentina" today. So, both my raid
drives are active at boot time early.

it was bumpy road but everything on this monester server works perfect. Never
knew of "dmraid" untill I switched to raid recently.

/var/log/boot.msg:
<6>device-mapper: dm-raid45: initialized v0.2431
<6>device-mapper: dm-raid45: /dev/sda is raid disk 0
<6>device-mapper: dm-raid45: /dev/sdb is raid disk 1
<6>device-mapper: dm-raid45: /dev/sdc is raid disk 2
<6>device-mapper: dm-raid45: 128/128/256 sectors chunk/io/recovery size, 64
stripes
<6>device-mapper: dm-raid45: algorithm "xor_64", 7 chunks with 4375MB/s
<6>device-mapper: dm-raid45: RAID5 (left asymmetric) set with net 2/3 devices
<6>device-mapper: dm-raid45: No regions to recover
<6>device-mapper: dm-raid45: /dev/sda is raid disk 0
<6>device-mapper: dm-raid45: /dev/sdb is raid disk 1
<6>device-mapper: dm-raid45: /dev/sdc is raid disk 2
<6>device-mapper: dm-raid45: 128/128/256 sectors chunk/io/recovery size, 64
stripes
<6>device-mapper: dm-raid45: algorithm "xor_64", 3 chunks with 4562MB/s
<6>device-mapper: dm-raid45: RAID5 (left asymmetric) set with net 2/3 devices
<6>device-mapper: dm-raid45: No regions to recover
Waiting for udev to settle...
Activating dmraid...
RAID set "isw_dihgfaif_Volume0" was activated
RAID set "isw_dihgfaif_Volume1" was activated
done
<6>Linux video capture interface: v2.00
<7>phy0: Selected rate control algorithm 'pid'
<6>ivtv: Start initialization, version 1.4.0
<6>phy0: hwaddr 00:17:3f:d3:0e:d0, RTL8185vD + rtl8225z2
<6>ivtv0: Initializing card #0
<6>ivtv0: Autodetected Hauppauge card (cx23415 based)
<6>vendor=8086 device=244e
<6>ivtv 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
<6>ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
<6>tveeprom 1-0050: Hauppauge model 48132, rev K268, serial# 9810550
<6>tveeprom 1-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47)
<6>tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
<6>tveeprom 1-0050: audio processor is MSP4448 (idx 27)
<6>tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
<6>tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter
<6>ivtv0: Autodetected Hauppauge WinTV PVR-350
<6>saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
<6>saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
<6>msp3400 1-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0)
<6>msp3400 1-0040: msp3400 supports radio, mode is autodetect and autoselect
<6>tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
<6>tda9887 1-0043: creating new instance
<6>tda9887 1-0043: tda988[5/6/7] found
<6>tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
<6>tuner-simple 1-0061: creating new instance
<6>tuner-simple 1-0061: type set to 47 (LG NTSC (TAPE series))
<6>ivtv0: Registered device video0 for encoder MPG (4096 kB)
<6>ivtv0: Registered device video32 for encoder YUV (2048 kB)
<6>ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
<6>ivtv0: Registered device video24 for encoder PCM (320 kB)
<6>ivtv0: Registered device radio0 for encoder radio
<6>ivtv0: Registered device video16 for decoder MPG (1024 kB)
<6>ivtv0: Registered device vbi8 for decoder VBI (64 kB)
<6>ivtv0: Registered device vbi16 for decoder VOUT
<6>ivtv0: Registered device video48 for decoder YUV (1024 kB)
<6>ivtv0: Initialized card #0: Hauppauge WinTV PVR-350
<6>ivtv: End initialization

ls /dev/mapper/

control isw_dihgfaif_Volume0 isw_dihgfaif_Volume0_part1 isw_dihgfaif_Volume1
isw_dihgfaif_Volume1_part1 isw_dihgfaif_Volume1_part2


/etc/fstab:

/dev/mapper/isw_dihgfaif_Volume0_part1 /vista ntfs auto,rw,sync,user
1 1


Next project is to install Linux on on 2nd raid, isw_dihgfaif_Volume1:

disk -l /dev/mapper/isw_dihgfaif_Volume1

Disk /dev/mapper/isw_dihgfaif_Volume1: 392.7 GB, 392734703616 bytes
255 heads, 63 sectors/track, 47747 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x103253fc

Device Boot Start End Blocks Id
System
/dev/mapper/isw_dihgfaif_Volume1p1 2 3917 31455270 83
Linux
/dev/mapper/isw_dihgfaif_Volume1p2 3918 4961 8385930 82
Linux swap / Solaris

Now i'm headed back to FL., winter is cool there.

thanks opensuse but please promote dmraid, and i will continue contributions.

--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx

< Previous Next >
Follow Ups