Mailinglist Archive: opensuse (3513 mails)

< Previous Next >
Re: [opensuse] Re: YaST fails to configure Hauppauge 350 PVR card]
  • From: Charles Philip Chan <cpchan@xxxxxxxxxxxx>
  • Date: Thu, 08 Jan 2009 20:34:34 -0500
  • Message-id: <873aftl0t1.fsf@xxxxxxxxxxxxxxx>
Marc Chamberlin <marc@xxxxxxxxxxxxxxxxxx> writes:

lsmod | grep ivtv
ivtv 134496 0
videodev 31236 3 msp3400,tuner,ivtv
compat_ioctl32 1104 1 ivtv
i2c_algo_bit 5764 1 ivtv
cx2341x 11076 1 ivtv
v4l2_common 10648 6 msp3400,saa7127,saa7115,tuner,ivtv,cx2341x
tveeprom 11248 1 ivtv
i2c_core 29972 13
tuner_simple,tda9887,tda8290,msp3400,saa7127,saa7115,tuner,ivtv,i2c_algo_bit,nvidia,v4l2_common,tveeprom,i2c_i801

OK, the drivers are loaded.

Yes and that is when I noticed I am having troubles... In the Capture Card
Setup section, I am selecting for Card type: MPEG-2 encoder card (PVR-x50,
PVR-500) This fails to fill in anything in the field for Video
device:

You must not be in the video group:

,----
| hoor@MagnusOpus:~> getfacl /dev/video0
| getfacl: Removing leading '/' from absolute path names
| # file: dev/video0
| # owner: root
| # group: video
| user::rw-
| group::rw-
| other::---
`----

Put yourself in it, relogin and try again. If that deosn't work, post
the output of:

,----
| dmesg | grep ivtv
`----

You should see something like this:

,----[ Output of dmesg | grep ivtv ]
| ivtv: Start initialization, version 1.4.0
| ivtv0: Initializing card #0
| ivtv0: Autodetected Hauppauge card (cx23416 based)
| ivtv 0000:01:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
| ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
| ivtv0: Autodetected Hauppauge WinTV PVR-150
| ivtv0: Reopen i2c bus for IR-blaster support
| cx25840 1-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
| tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
| wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
| ivtv0: Registered device video1 for encoder MPG (4096 kB)
| ivtv0: Registered device video32 for encoder YUV (2048 kB)
| ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
| ivtv0: Registered device video24 for encoder PCM (320 kB)
| ivtv0: Initialized card #0: Hauppauge WinTV PVR-150
| ivtv: End initialization
| ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
| ivtv0: Encoder revision: 0x02060039
`----

Charles

--
linux: the choice of a GNU generation
(ksh@xxxxxxxxxxx put this on Tshirts in '93)
< Previous Next >
Follow Ups
References