Hello! I have several Corsair USB Pen Drives. Voyager GT and Survivor types. There are no problems with my two Voyager GT's. These are 8 Gb. But I also have two Survivor's. These are 16 Gb, I do not know whether that is the problem, but they will not show up in Konqueror (or Dolphin which I have also tried). My Voyager GT's come up and read as well as write fine - no problems. The .hal-mtab file is written to and informs about what is attached. My Survivors do not work. They are detected by the system, but will not show up under "media." Also, the .hal-mtab file remains empty. Here is the dmesg outputs for the Survivor and the Voyager GT, respectively: ---- The Survivor: usb 5-1: new high speed USB device using ehci_hcd and address 6 usb 5-1: configuration #1 chosen from 1 choice scsi8 : SCSI emulation for USB Mass Storage devices usb 5-1: New USB device found, idVendor=1b1c, idProduct=0a31 usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 5-1: Product: UFD usb 5-1: Manufacturer: Corsair usb 5-1: SerialNumber: 7b63a6b7d9f04a usb-storage: device found at 6 usb-storage: waiting for device to settle before scanning scsi 8:0:0:0: Direct-Access Corsair UFD 0.00 PQ: 0 ANSI: 2 sd 8:0:0:0: [sdc] 31588352 512-byte hardware sectors: (16.1GB/15.0GiB) sd 8:0:0:0: [sdc] Write Protect is off sd 8:0:0:0: [sdc] Mode Sense: 00 00 00 00 sd 8:0:0:0: [sdc] Assuming drive cache: write through sd 8:0:0:0: [sdc] 31588352 512-byte hardware sectors: (16.1GB/15.0GiB) sd 8:0:0:0: [sdc] Write Protect is off sd 8:0:0:0: [sdc] Mode Sense: 00 00 00 00 sd 8:0:0:0: [sdc] Assuming drive cache: write through sdc: sdc1 sd 8:0:0:0: [sdc] Attached SCSI removable disk sd 8:0:0:0: Attached scsi generic sg4 type 0 usb-storage: device scan complete ---- ---- The Voyager GT: usb 5-1: new high speed USB device using ehci_hcd and address 7 usb 5-1: configuration #1 chosen from 1 choice scsi9 : SCSI emulation for USB Mass Storage devices usb 5-1: New USB device found, idVendor=1b1c, idProduct=1a90 usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 5-1: Product: Voyager GT usb 5-1: Manufacturer: Corsair usb 5-1: SerialNumber: AA44636009013688 usb-storage: device found at 7 usb-storage: waiting for device to settle before scanning scsi 9:0:0:0: Direct-Access Corsair VoyagerGT 1100 PQ: 0 ANSI: 0 CCS sd 9:0:0:0: [sdc] 16187392 512-byte hardware sectors: (8.28GB/7.71GiB) sd 9:0:0:0: [sdc] Write Protect is off sd 9:0:0:0: [sdc] Mode Sense: 43 00 00 00 sd 9:0:0:0: [sdc] Assuming drive cache: write through sd 9:0:0:0: [sdc] 16187392 512-byte hardware sectors: (8.28GB/7.71GiB) sd 9:0:0:0: [sdc] Write Protect is off sd 9:0:0:0: [sdc] Mode Sense: 43 00 00 00 sd 9:0:0:0: [sdc] Assuming drive cache: write through sdc: sdc1 sd 9:0:0:0: [sdc] Attached SCSI removable disk sd 9:0:0:0: Attached scsi generic sg4 type 0 usb-storage: device scan complete ---- Per Inge Oestmoen -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org