Hi, During boot an encrypted partition should be mounted using a using a key-file. I get: error on stat() /dev/mapper/cr_sdb2: No such file or directory Failed to open the device 'dev/mapper/cr_sdb2': no such file or directory fsck.reiserfs dev/mapper/cr_sdb2 failed (status 0x8). Run manually! I have following partitions: /dev/sda2 /boot (normal partition) /dev/sda3 / (encrypted partition, password to enter during boot) /dev/sdb1 swap (encrypted, password in /etc/crypt-swap.key) /dev/sdb2 /mnt/test (encrypted, password in /etc/crypt-test.key) without cr_sdb2 in fstab it boots perfect now, swap is encrypted and on. with cr_sdb2 in fstab I get the above shown messages. /etc/crypttab: cr_sdb1 /dev/disk/by-id/id_of_the_disk /etc/crypt-swap.key swap cr_sdb2 /dev/disk/by-id/id_of_the_disk /etc/crypt-test.key luks in /etc/fstab I added /dev/mapper/cr_sdb2 /mnt/test reiserfs acl,usr_xattr 1 2 After booting (cr_sdb2-line in fstab commented out) I can mount sdb2 with mount /mnt/test /dev/mapper/cr_sdb2 without typing a password. Why can't it open it at boot? Any help possible? Daniel -- Daniel Bauer photographer Basel Switzerland professional photography: http://www.daniel-bauer.com erotic art photos: http://www.bauer-nudes.com/en/linux.html Madagascar special: http://www.fotograf-basel.ch/madagascar/ -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org