Hello all, My hardware is at the bottom of this email. Here is my xorg.conf. Any ideas? Section "Monitor" Option "CalcAlgorithm" "XServerPool" DisplaySize 338 270 HorizSync 30-80 Identifier "Monitor[0]" ModelName "1703FP (DIGITAL)" Option "DPMS" VendorName "DELL" VertRefresh 56-76 UseModes "Modes[0]" EndSection Section "Monitor" Option "CalcAlgorithm" "XServerPool" DisplaySize 338 270 HorizSync 30-80 Identifier "Monitor[1]" ModelName "1703FP (DIGITAL)" Option "DPMS" VendorName "DELL" VertRefresh 56-76 UseModes "Modes[0]" EndSection Section "Modes" Identifier "Modes[0]" Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +HSync +VSync Modeline "1024x768" 78.65 1024 1056 1184 1312 768 772 776 792 EndSection Section "Screen" SubSection "Display" Depth 15 Modes "default" EndSubSection SubSection "Display" Depth 16 Modes "default" EndSubSection SubSection "Display" Depth 24 Modes "default" EndSubSection SubSection "Display" Depth 8 Modes "default" EndSubSection Device "Device[0]" Identifier "Screen[0]" Monitor "Monitor[0]" EndSection Section "Screen" SubSection "Display" Depth 15 Modes "default" EndSubSection SubSection "Display" Depth 16 Modes "default" EndSubSection SubSection "Display" Depth 24 Modes "default" EndSubSection SubSection "Display" Depth 8 Modes "default" EndSubSection Device "Device[1]" Identifier "Screen[1]" Monitor "Monitor[1]" EndSection Section "Device" BoardName "Framebuffer Graphics" Driver "fbdev" Identifier "Device[0]" Screen 0 VendorName "VESA" EndSection Section "Device" BoardName "Framebuffer Graphics" Driver "fbdev" Identifier "Device[1]" Screen 0 VendorName "VESA" EndSection Section "ServerLayout" Identifier "Multihead layout" Screen 0 "Screen[0]" Screen 1 "Screen[1]" rightOf "Screen[0]" InputDevice "Keyboard[0]" "CoreKeyboard" InputDevice "Mouse[1]" "CorePointer" # Option "Xinerama" "on" Option "Clone" "off" EndSection HARDWARE =========== 31: PCI 100.0: 0300 VGA compatible controller (VGA) [Created at pci.301] UDI: /org/freedesktop/Hal/devices/pci_1002_7183 Unique ID: VCu0.aiHZfenAOj2 Parent ID: vSkL.MGnq93IN+_A SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0 SysFS BusID: 0000:01:00.0 Hardware Class: graphics card Model: "Dell Radeon X1300/X1550 Series (RV516 7183)" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x7183 "Radeon X1300/X1550 Series (RV516 7183)" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0d02 Memory Range: 0xc0000000-0xcfffffff (rw,prefetchable) Memory Range: 0xdfde0000-0xdfdeffff (rw,non-prefetchable) I/O Ports: 0xdc00-0xdcff (rw) Memory Range: 0xdfe00000-0xdfe1ffff (ro,prefetchable,disabled) IRQ: 11 (no events) I/O Ports: 0x3c0-0x3e7 (rw) Module Alias: "pci:v00001002d00007183sv00001028sd00000D02bc03sc00i00" Driver Info #0: XFree86 v4 Server Module: fglrx Driver Info #1: XFree86 v4 Server Module: fglrx 3D Support: yes Extensions: dri Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #15 (PCI bridge) 32: PCI 100.1: 0380 Display controller [Created at pci.301] UDI: /org/freedesktop/Hal/devices/pci_1002_71a3 Unique ID: NXNs.bcVrYw36tO6 Parent ID: vSkL.MGnq93IN+_A SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.1 SysFS BusID: 0000:01:00.1 Hardware Class: graphics card Model: "Dell RV516 [Radeon X1300 Pro] (Secondary)" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x71a3 "RV516 [Radeon X1300 Pro] (Secondary)" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0d03 Memory Range: 0xdfdf0000-0xdfdfffff (rw,non-prefetchable) Module Alias: "pci:v00001002d000071A3sv00001028sd00000D03bc03sc80i00" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #15 (PCI bridge) Dell 1703FP Monitor Dell 1703FP Monitor -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org