Hello all I cannot use the modem on my laptop. wit OpenSuse 10.2 The cpu Is an Intel Centrino 1.7 Ghz. with 2048 K cache. here is the output of the lspci -v command about the modem : 0000:00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic]) Subsystem: QUANTA Computer Inc: Unknown device 6601 Flags: bus master, medium devsel, latency 0, IRQ 11 I/O ports at 2400 [size=256][disabled] I/O ports at 2000 [size=128][disabled] Capabilities: [50] Power Management version 2 This same modem works under SuSE 9.3 but the I/O ports are not said to be disabled by lspci. I went to the support site and was instructed to use the setserial comand, but it did not change anything. Consulted lots of archives, but found nothing relevant. How can I enable these ports ? Is there anything I should download to patch ? I cannot download many things, since I am on a slow dialup connection. However I could install OpenSuse 10.2 on another machine with an external modem and it worked. could you help me for this one, please ? Paul. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org