I am trying to run KRadio (various versions, but snapshot_2006_11_12_r497-1.suse10.2.x86_64 at the moment), on Suse 10.2 x86_64 and it seems to install OK, and even startup OK, but when scanning for channels I get no signal. I have a Medion hybrid TV (Analog/DTV/FM) card based on the saa7134 chipset, detected as: pc:/home/john # dmesg|grep saa7134 saa7134[0]: found at 0000:07:09.0, rev: 1, irq: 90, latency: 32, mmio: 0xdf5ff000 saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected] saa7134[0]: board init: gpio is 0 saa7134[0]: i2c eeprom 00: be 16 03 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50 saa7134[0]: i2c eeprom 20: 01 40 01 02 02 03 01 00 06 ff 00 1f 02 51 96 2b saa7134[0]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c saa7134[0]: i2c eeprom 40: ff 1d 00 c2 86 10 01 01 00 00 fd 79 44 9f c2 8f saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff 06 06 0f 00 0f 00 0f 00 0f 00 saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0] Board has DVB-T saa7134[0] Tuner type is 63 tuner 0-0061: chip found @ 0xc2 (saa7134[0]) saa7134[0]: registered device video0 [v4l2] saa7134[0]: registered device vbi0 saa7134[0]: registered device radio0 Has 2x aerial inputs, and have tried connecting to both and scanning. DTV and Analog TV both work fine. Anybody have any suggestions for me to try?? Have tried various other card/tuner types (but not all!!) Have tried searching for any kradio/relevant TV card forums, without success.... :-( Thanks, in anticipation....! -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org