Rikard Johnels wrote:
I have an older Intel server with a Mylex RAID card in it. The array is 6 drives in RAID 5, no spares. The installer complains about not being able to do anything on the array, so i got into a rescue kernel boot and used fdisk to make three parttitions on it. /dev/rd/c0d0p1 - /boot (ext2) /dev/rd/c0d0p2 - swap (swap) /dev/rd/c0d0p3 - / (xfs) I made the filesystems after syncing the disks.
But the installer doesn't recognize them at all. It sees /dev/rd/c0d0 as a full partition, and states it cannot do anything with it.
How do i get the table read? How do i initialize the array for usage in the installer?
I am eagerly waiting for the answer as well because I suspect that I currently have the same problem with an old FSC Primergy 470 with Mylex DAC960PRL Controller. Can you delete the partitions and create them in yast again? If not, I can't update to Suse 10.2 either. Sandy -- List replies only please! Please address PMs to: news-reply2 (@) japantest (.) homelinux (.) com -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org