Hi all I recently upgraded to 9.1 and wvdial stopped working from the terminal. I can still connect with qinternet. Below is what I get when I try to run wvdial from a terminal. I can't figure out why wvdial is looking for www.suse.de I have not made any changes to the wvdial.conf. I have also posted the log of qinternet. Why does the one work and the other not? Any thoughts? +++++++++++++++++++++++wvdial output++++++++++++++++++++++++++++ Darius: wvdial --> WvDial: Internet dialer version 1.54.0 --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 X3 V1 E1 S0=0 &C1 &D2 ATQ0 X3 V1 E1 S0=0 &C1 &D2 OK --> Sending: ATM0 ATM0 OK --> Modem initialized. --> Idle Seconds = 300, disabling automatic reconnect. --> Sending: ATDT8962588888 --> Waiting for carrier. ATDT8962588888 CONNECT 31200/ARQ/V34/LAPM/V42BIS Welcome to FORTHnet PSTN/ISDN WAN Gateway in Greece User Access Verification Username: --> Carrier detected. Starting PPP immediately. --> Starting pppd at Sun Oct 10 10:40:02 2004 --> pid of pppd: 16113 --> Using interface ppp0 --> pppd: 2 --> pppd: 2 --> pppd: 2 --> local IP address 213.16.196.108 --> pppd: 2 --> remote IP address 194.219.239.104 --> pppd: 2 --> primary DNS address 193.92.150.3 --> pppd: 2 --> secondary DNS address 194.219.227.2 --> pppd: 2 --> Script /etc/ppp/ip-up run successful --> Default route Ok. --> warning, can't find address for `www.suse.de` --> warning, address lookup does not work --> Nameserver (DNS) failure, the connection may not work. --> Connected... Press Ctrl-C to disconnect --> pppd: 2 +++++++++++++++++++++++qinternet output+++++++++++++++++++++++++++++ SuSE Meta pppd (smpppd-ifcfg), Version 1.16 on Darius. Status is: disconnected trying to connect to smpppd connect to smpppd Status is: disconnected Status is: connecting pppd[0]: Plugin passwordfd.so loaded. pppd[0]: --> WvDial: Internet dialer version 1.54.0 pppd[0]: --> Initializing modem. pppd[0]: --> Sending: ATZ pppd[0]: ATZ pppd[0]: OK pppd[0]: --> Sending: AT X3 Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 pppd[0]: AT X3 Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 pppd[0]: OK pppd[0]: --> Sending: ATM1 pppd[0]: ATM1 pppd[0]: OK pppd[0]: --> Sending: ATX3 pppd[0]: ATX3 pppd[0]: OK pppd[0]: --> Modem initialized. pppd[0]: --> Sending: ATDT8962588888 pppd[0]: --> Waiting for carrier. pppd[0]: ATDT8962588888 pppd[0]: CONNECT 31200/ARQ/V34/LAPM/V42BIS pppd[0]: User Access Verification pppd[0]: Username: pppd[0]: --> Carrier detected. Waiting for prompt. pppd[0]: Username: pppd[0]: --> Looks like a login prompt. pppd[0]: --> Sending: xxxxxxxxxxxxxxxxxxxxxxx pppd[0]: xxxxxxxxxxxxxxxxxxxxxxx pppd[0]: Password: pppd[0]: --> Looks like a password prompt. pppd[0]: --> Sending: (password) pppd[0]: Entering PPP mode. pppd[0]: Async interface address is unnumbered (Loopback0) pppd[0]: Your IP address is 0.0.0.0. MTU is 1500 bytes pppd[0]: --> Looks like a welcome message. pppd[0]: Serial connection established. pppd[0]: Using interface ppp0 Status is: connecting pppd[0]: Connect: ppp0 <--> /dev/ttyS0 pppd[0]: local IP address 213.16.196.115 pppd[0]: remote IP address 194.219.239.104 pppd[0]: primary DNS address 193.92.150.3 pppd[0]: secondary DNS address 194.219.227.2 pppd[0]: Script /etc/ppp/ip-up finished (pid 19050), status = 0x0 Status is: connected