I need some help here. I seem to have gotten myself in way over my head with an ADSL install using a SpeedTouch modem. I've done it a few times with a 'dumb' DLink modem and its been a breeze. SuSE found the modem, configured it and that was that. I thought it would be the same with this one, but I was wrong. I've tried SuSE 8.2 but can't make the thing work. Now, the details (and this is a bit long winded sorry). The modem is a Speed Touch 510, has a heap of onboard stuff that is turned off and its basically just configured as a bridge. The PC has 2 NICS that have been given static IP's as follows, eth0 (connected to the modem) 150.101.124.xxx, net mask 255.255.255.252 eth1 (connected to lan) 172.21.103.yyy, net mask 255.255.255.0 The gateway has been given as 150.101.214.xxz When I configure the nics as above, I can't connect to the modem's web page because the lan is on a different subnet to the modem (I think) but I can get to it from a different pc on the lan (this worries me a bit). I can ping both the nics, I can ping other lan machines, I can ping the DNS machines (by IP only). When I try and ping an external machine by IP I get network unreachable, and by name it just hangs. I've enabled IP forwarding and I set the firewall to be what I've used before successfully. Now, I have no idea where to go from here. I've spent all day on this and have got absolutely nowhere. The modem is working OK as I can get to the net from a win box when its configured to use the modem as a gateway. Thanks heaps... Peter Nunn -- Think IT for your computing needs. InfoTeq Pty. Ltd.