November 2003 - openSUSE Users - openSUSE Mailing Lists

[SLE] RealPlayer G2 on SuSe 6.2
by yh＠ottawa.com 03 Apr '24

03 Apr '24

Yesterday, I finally got sound going on my Linux setup. I downloaded RealPlayer G2 and it worked beautifully. Today, RealPlayer run but no sound coming out. All other sound functions still work. I can still play my CD, have system sound BUT no sound when I run RealPlayer. /var/log/message said kernel: Sound: DMA (output) timed out - IRQ/DRQ config error? but KDE sound still work. I have re-installed RealPlayer 3 times now, still no sound when I run the RealPlayer. Any help is appreciated. Ying yh(a)ottawa.com -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 2

Creating a new user for a deamon
by Rowan Reid 15 Jan '24

15 Jan '24

I'm setting up a cron job for a analysis tool, I'm trying to use the SuSE tools where possible but YAST doent' allow you to create new user without a home I tried /dev/null is there a proper way to do this ? Rowan Reid Job Captain, Systems Administrator STUDIO 3 ARCHITECTS 909 982 1717

3 2

Web Site Standards
by Bryan Tyson 25 Sep '21

25 Sep '21

On Wednesday 03 July 2002 03:38, Michael wrote: > I tried to visit this site. > http://www.bet365.com > The result upset me so much i sent them this. I sent the letter below, and I encourage everyone on the list to send a similar letter. ----------------------------------------- Subject: Create a Real Web Site Please From: Bryan S. Tyson <bryantyson(a)earthlink.net> To: webmaster(a)bet365.com When attempting to view your site using Konqueror 2.2.1 and Mozilla 0.9.4, both Linux web browsers, I was curtly informed that my browser is "incompatible." Your site, sir, is what is "incompatible." Stick with established standards and real html, not Microsoft proprietary "features." *************************************************** Powered by SuSE Linux 7.3 Professional KDE 2.2.1 KMail 1.3.1 This is a Microsoft-free computer Bryan S. Tyson bryantyson(a)earthlink.net ***************************************************

10 9

Mount Windows NT(NTFS) drive as drive Z: for all users
by Keith Jacobs 25 Sep '21

25 Sep '21

We have an winNT server and need to auto mount a shared folder as if it were a windose mapped drive Z: on SuSE8 Could someone please explain how to do this and how to make sure it is set-up for every user everytime the system is booted. Thanks Regards Keith Jacobs New to Linux

3 2

Adding fonts?
by Tracer Bullet 22 Aug '16

22 Aug '16

Hi all, Reading some mails on the GIMP mail list, I ran across the procedure to install some more fonts for not only Gimp, but the system and StarOffice to use also. Well, I installed the fonts, went to the shell and issued the command xset fp+ <font directory> and then the rehash command and all fonts are there! Ok, that went well, but each time I restart the system, I have to do it all over again? Is there a way to make it permanent and read the new fonts like it does the ones the system installs or is that a no-no? end of line Tracer Shell commands: xset fp+ <new font directory> xset fp rehash -- ---KMail 1.2--- SuSE Linux v7.2--- Registered Linux User #225206 /tracerb(a)sprintmail.com/ *Magic Page Products* *Team Amiga* http://home.sprintmail.com/~tracerb

3 2

print from K-Mail run together
by Doug McGarrett 01 May '06

01 May '06

I don't remember seeing this problem on the list. KMail print on screen is clear and most letters are separated. When I print out a mail, some letters, particularly the "t", the "si" and the "sk" combinations are scrunched together with adjoining letters. I am printing to an HP 2200D laserjet. The typeface on screen (and on paper) is a sans-serif font. Even on screen, it is slightly scrunched in spots. "ri" and "ti" and "tt" and "th" are too close together. Suggestions? TNX--doug

5 6

screen, mouse, kb lockup
by Doug McGarrett 25 Apr '06

25 Apr '06

While attempting to stop a video playing on Macro Media Flash Player 7, I managed to lock out everything. I could not move the mouse cursor, the arrow keys and the rest of the kb didn't work, ctl-alt-del did nothing. None of the function keys did anything. (The video was something downloaded from the 'net via Firefox.) I wound up pulling the big switch, as us hams like to say. Is there anything else I could have done? I'm trying to put Linux to practical use, and this is the first time I've seen 10.0 crash, so it's good, but not fool-proof. (If something can be broken, this fool will break it!)

3 2

External disk choice
by Maura Edelweiss Monville 11 Feb '06

11 Feb '06

I have a 4-year old DELL desktop with a heavy CRT monitor that I'm going to give away soon . I also have a 2 month old laptop. Both computers run Linux/SuSE. I would like to buy an external disk to save most of my s/w development now residing on my old desktop. But I would like to be able to use it also with my laptop. Both computers have some USB ports so I daresay an external USB disk would be fine .. I'd appreciate some suggestion about a USB reliable, large capacity but portable, external disk or any alternative solution. Thank you in advance. Maura

8 11

SCSI RAID recovery
by Robert Amodeo 19 Jan '06

19 Jan '06

I have a fileserver running SuSE 8.0 with 2 IDE Drives and a SCSI RAID (RAID5). The system boots up to one of the IDE drives, and the SCSI RAID drive runs as a mounted filesystem (/dev/md0). (all filesystems are REISERFS). Problem: The SCSI RAID drive has crashed (won't boot up), and I need to recover it (repair it, through some utility). Further: The software does not seem to want to mount the disks, even though the SCSI BIOS (Adaptec) recognizes the disks, and they are listed as OPTIMAL. I tried to repair the disk(s) (with reiserfsck), but it produced an error message: reiserfs_open: bread failed reading block 2 reiserfs_open: bread failed reading block 16 reiserfs_open: neither new nor old reiserfs form found on /dev/md0 The literature suggested that this error message is hardware related (either a disk is physically damaged, or maybe the RAID isn't recognized), but again, the disks are recognized (and therefore, so is the SCSI Card). I tried to boot up with SuSE CD 1 in Recovery mode, but not sure what to do there (i.e., after the root prompt - just run reiserfsck?). Literature suggests there are plenty of tools to handle disk recovery, and especially RAID support, I can't find reference to them anywhere. The installation of the RAID was trivial (using the YAST2 partitioning GUI window on startup), and yet recovery seems to be a mystery. This can't be right. Does anyone know where there are "decent" and "usable" recovery tools? OR ... does anyone know what "specifically" to do in this case? Can I re-partition without formatting, and recover the existing data? Any help is appreciated - I'm sure I'm missing something "obvious", but can't find "obviously" what to do in the literature, docs, etc. Thank you. Robert Amodeo School of Engineering and Applied Science University of California, Los Angeles

3 4

Re: [SLE] Time synch problem
by Carlos E. R. 22 Feb '05

22 Feb '05

El 2003-07-09 a las 13:37, C Hamel escribió: (You forgot to post to the list) > I am afraid I don't even know how to ask a question, at this point, but I'll > make an attempt: Exactly where should this ntp thing be called to set the > clock ...or(/and) by what process? It is a very proper question :-) Well, it depends. There are two ways. If your computer is up all the time, and has a permanent network connection, you can use the ntpd daemon, which polls a set of servers about once a minute, and _very_ slowly adjusts the system clock; it can even note the systematic error or drift, and take that in to account to discipline the system clock. There are many options available for the daemon: see full doc in: http://localhost/usr/share/doc/packages/xntp-doc/html/index.htm Or, you may have a temporary network connection, like I do; I will explain this in some detail. We can adjust the clock to "internet" time, once, sometime after we connect to internet. This, apparently, can be done with the daemon, using some option I don't fully understand. Or we can use ntpdate - a program which is to disappear some time in the future, but that I use, and SuSE uses as well in its own script. For this, we can simply call "/etc/init.d/xntpd ntptimeset" - and assume that when "ntpdate" finally disappears SuSE will adjust the script appropriately ;-) Of course, /etc/ntp.conf has to be configured; at least, it must have a list of servers: server IP_address server name_address This is sufficient for "xntpd ntptimeset" to work; just leave the rest of the config at the default values. If you want to use the daemon, then I'm not the person to ask :-) Ok, so when is the appropriate time to make this time adjust? Well, ideally, during system boot-up, after network connection is established. This is done properly by the service xntpd, if enabled. The SuSE script "/etc/init.d/xntpd start" does first a clock set using ntpdate, if the variable XNTPD_INITIAL_NTPDATE is set to "AUTO". Then, it starts the daemon to keep time synchronized. And, if our network connection is not permanent? Then, the script "/etc/ppp/poll.tcpip", which is called from "/etc/ppp/ip-up", will adjust the clock first thing: assuming we have some servers configured, it will be done every time we connect to internet with the modem. I do it differently, only once every five times, and I also update the hwclock. The danger of this method is that the clock might suddenly go forward or backward a bit (seconds or hours, it depends): not very nice on a *nix system, but we can not avoid it. More details to be aware of: what happens to the hardware or CMOS clock? Well, the script "/etc/init.d/boot.clock" (read it, it is documented) does this sequence of things (using the command "hwclock") before starting system services: - Create if it doesn't exist, the file "/etc/adjtime" - Adjust hardware clock (CMOS) for known drift during the time the computer has been off; this depends on the previous file to work. - Copy CMOS clock (hardware) to system time (CPU and OS maintained). After this, the system goes fully up, and maybe, the clock is adjusted from the internet or by hand (danger!). But (and this is very different than windows) the CPU maintained clock has to be copied back to the CMOS, because the kernel doesn't do it. SuSE does it in the script "/etc/init.d/halt" that copies system time to hardware time just before power off. Me, I prefer to do it just after I adjust to network time, inside "ip-up.local", like this: /usr/sbin/rcxntpd ntptimeset /sbin/hwclock --systohc More things to be aware of: a common mistake is manually adjusting the system clock from kde control center (for example), and not updating the hwclock at the same time: the drift adjust algorithm of hwclock thinks that the CMOS clock is fast or slow by the same amount you adjusted the clock, and the next boot it will adjust the time by several hours... The solution is to delete "/etc/adjtime" and call "/sbin/hwclock --systohc" just then (documented on the SuSE sdb). Well, this has been enough chatter on my part; let's hope I didn't make many mistakes :-) -- Saludos Carlos Robinson

3 7