Hi, There are 2 ethernet interfaces in PC with SuSE 8.0. I can ping from this router to computers from the two networks (The 1st is 192.168.1.0/24, the other is 192.168.2.0/24). I can ping my router from each net too (both IP's associated to both interfaces). But it's not posiible to ping FROM ONE TO OTHER NETWORK. What should I do to set up static router? There are no firewall rule in listing 'iptables -L' . I don't run any script '/etc/rc.d/personal-firewall.*' during booting. After typing 'route' I can see: 192.168.2.0 * 255.255.255.0 U 0 0 0 eth1 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 There's gateway at the adress 192.168.1.1 for internet and local network. I tryed to use routed. It added into routing table 2 rows similar to first two listed above but '*' was replaced with 'linux.domain.cz' on both rows. 'routed' set flags at this new rows to 'UG' instead 'U'. Host name of my router is 'linux'. With 5 rows in routing table or with 3 after deleting my old rules it doesn't route with routed too. Please help. Thank you very much. _______________________________________________________________ Marek Libra Phone:+42 0776 039 948 Email: xlibra@fi.muni.cz Faculty of Informatics, Masaryk University Brno, Czech Republic _______________________________________________________________