On Mon, 2002-05-27 at 22:34, Harry G wrote:
Using Suse 7.3 2.4.16 kernel
I want to verify that my 2 USB ports are seen and all the proper
configurations done during start up.
What in the /var/log/boot.msg will tell me this? Or is it elsewhere?
<snip of mine>
<6>uhci.c: USB UHCI at I/O 0xd400, IRQ 5
<6>usb.c: new USB bus registered, assigned bus number 1
<6>uhci.c: detected 2 ports
<7>usb.c: kmalloc IF cff4b87c, numif 1
<7>usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
<7>usb.c: USB device number 1 default language ID 0x0
<6>Product: USB UHCI-alt Root Hub
<6>SerialNumber: d400
<6>hub.c: USB hub found
<6>hub.c: 2 ports detected
<7>hub.c: standalone hub
<7>hub.c: ganged power switching
<7>hub.c: global over-current protection
<7>hub.c: Port indicators are not supported
<7>hub.c: power on to power good time: 2ms
<7>hub.c: hub controller current requirement: 0mA
<7>hub.c: port removable status: RR
<7>hub.c: local power source is good
<7>hub.c: no over-current condition exists
<7>hub.c: enabling power on all ports
<7>usb.c: hub driver claimed interface cff4b87c
<7>usb.c: call_policy add, num 1 -- no FS yet
<6>usb.c: registered new driver hiddev
<6>usb.c: registered new driver hid
<6>hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik
<6>hid-core.c: USB HID support drivers
[ This is the USB HOST, or the hub waking up]
<6>usb.c: registered new driver usbscanner
<6>scanner.c: 0.4.6:USB Scanner Driver
<6>usb.c: registered new driver acm
<6>acm.c: v0.21:USB Abstract Control Model driver for USB modems and
ISDN adapters
<6>usb.c: registered new driver usblp
<7>uhci.c: root-hub INT complete: port1: 5ab port2: 5ab data: 6
<6>printer.c: v0.8:USB Printer Device Class driver
<6>usb.c: registered new driver uss720
<6>uss720.c: v0.5:USB Parport Cable driver for Cables using the Lucent
Technologies USS720 Chip
<6>usb.c: registered new driver microtekX6
<6>microtek.c: v0.4.3:Microtek Scanmaker X6 USB scanner driver
<7>Driver loaded
<6>usb.c: registered new driver hpusbscsi
<6>usb.c: registered new driver serial
<6>usbserial.c: USB Serial support registered for Generic
[ These are drivers being registered for the Kernel]
<7>uhci.c: root-hub INT complete: port1: 5ab port2: 5ab data: 6
[ HUB 1 up! ]
<6>usbserial.c: USB Serial Driver core v1.4
<6>usbserial.c: USB Serial support registered for Handspring Visor
<6>usbserial.c: USB Serial support registered for Palm 4.0
<6>usbserial.c: USB Serial support registered for Sony Cli?3.5
<6>usbserial.c: USB Serial support registered for Sony Cli?4.0
<6>visor.c: USB HandSpring Visor, Palm m50x, Sony Cli?driver v1.5
[ More Drivers ]
<7>uhci.c: root-hub INT complete: port1: 5ab port2: 5ab data: 6
[ HUB 2 up! ]
<7>uhci.c: root-hub INT complete: port1: 5a5 port2: 5ab data: 4
<7>usb.c: kmalloc IF cff4bd7c, numif 1
<7>usb.c: skipped 1 class/vendor specific interface descriptors
<7>usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0
<7>usb.c: USB device number 2 default language ID 0x409
[ HUB reports devices are actually plugged in! ]
<6>Manufacturer: Microsoft
<6>Product: Microsoft Trackball Explorer
<7>uhci.c: root-hub INT complete: port1: 5a5 port2: 5ab data: 4
<6>input0: USB HID v1.00 Mouse [Microsoft Microsoft Trackball Explorer]
on usb1:2.0
<7>usb.c: hid driver claimed interface cff4bd7c
<7>usb.c: kusbd: /sbin/hotplug add 2
<7>uhci.c: root-hub INT complete: port1: 5a5 port2: 5ab data: 4
<7>hub.c: port 2 connection change
<7>hub.c: port 2, portstatus 301, change 3, 1.5 Mb/s
<7>uhci.c: root-hub INT complete: port1: 5a5 port2: 5a9 data: 4
<7>uhci.c: root-hub INT complete: port1: 5a5 port2: 5af data: 4
<7>hub.c: port 2, portstatus 303, change 0, 1.5 Mb/s
<6>hub.c: USB new device connect on bus1/2, assigned device number 3
<7>usb.c: kmalloc IF cff4bf34, numif 1
<7>usb.c: skipped 1 class/vendor specific interface descriptors
<7>usb.c: new device strings: Mfr=4, Product=32, SerialNumber=0
<7>usb.c: USB device number 3 default language ID 0x409
<6>Manufacturer: Logitech Inc.
<6>Product: WingMan Gamepad
[ Devices are identified! ]
Have fun!
--
Travis.
For Laptop issuses, check out: http://www.linux-laptop.net
For Wireless LAN issues, check out: http://www.linux-wlan.com
Don't forget to document your experiences, tricks, and advice
while using Linux. Post it somewhere so we'll all benefit
from it. You never know who will be asking the same question
next time.
