On Monday 03 September 2001 08:22, Jostein Berntsen wrote:
Hi,
First check that you have performed all the steps in this howto:
http://seismo.ethz.ch/linux/xcdroast.html
If you still got problems post your boot log, fstab and mount command.
Jostein
Jostein Can I ask you to look my files please Inspecting /boot/System.map-2.4.4-4GB Loaded 10917 symbols from /boot/System.map-2.4.4-4GB. Symbols match kernel version 2.4.4. Loaded 33 symbols from 2 modules. klogd 1.3-3, log source = ksyslog started. <4>Linux version 2.4.4-4GB (root@Pentium.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 Fri May 18 14:11:12 GMT 2001 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) <4> BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data) <4> BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS) <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) <4>Scan SMP from c0000000 for 1024 bytes. <4>Scan SMP from c009fc00 for 1024 bytes. <4>Scan SMP from c00f0000 for 65536 bytes. <4>Scan SMP from c009fc00 for 4096 bytes. <4>On node 0 totalpages: 65520 <4>zone(0): 4096 pages. <4>zone(1): 61424 pages. <4>zone(2): 0 pages. <4>mapped APIC to ffffe000 (01442000) <4>Kernel command line: auto BOOT_IMAGE=linux ro root=344 BOOT_FILE=/boot/vmlinuz <6>Initializing CPU#0 <4>Detected 704.954 MHz processor. <4>Console: colour dummy device 80x25 <4>Calibrating delay loop... 1405.74 BogoMIPS <4>Memory: 254764k/262080k available (1225k kernel code, 6928k reserved, 933k data, 112k init, 0k highmem) <4>Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) <4>Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) <4>Page-cache hash table entries: 65536 (order: 6, 262144 bytes) <4>Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) <5>VFS: Diskquotas version dquot_6.5.0 initialized <7>CPU: Before vendor init, caps: 0183f9ff c1c3f9ff 00000000, vendor = 2 <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <6>CPU: L2 Cache: 512K (64 bytes/line) <7>CPU: After vendor init, caps: 0183f9ff c1c3f9ff 00000000 00000000 <7>CPU: After generic, caps: 0183f9ff c1c3f9ff 00000000 00000000 <7>CPU: Common caps: 0183f9ff c1c3f9ff 00000000 00000000 <4>CPU: AMD Athlon(tm) Processor stepping 01 <6>Enabling fast FPU save and restore... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) <4>mtrr: detected mtrr type: Intel <4>PCI: PCI BIOS revision 2.10 entry at 0xfd9e1, last bus=1 <4>PCI: Using configuration type 1 <4>PCI: Probing PCI hardware <6>PCI: Using IRQ router VIA [1106/0686] at 00:04.0 <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14) <4>Starting kswapd v1.8 <4>allocated 32 pages and 32 bhs reserved for the highmem bounces <6>vesafb: framebuffer at 0xe4000000, mapped to 0xd0800000, size 32768k <6>vesafb: mode is 800x600x8, linelength=800, pages=31 <6>vesafb: protected mode interface info at c000:7b00 <6>vesafb: scrolling: redraw <4>ptr = cff2a000, len = 2050, con = 0 <4>Console: switching to colour frame buffer device 82x25 <6>fb0: VESA VGA frame buffer device <4>pty: 256 Unix98 ptys configured <4>block: queued sectors max/low 169133kB/56377kB, 512 slots per queue <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>Uniform Multi-Platform E-IDE driver Revision: 6.31 <4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <4>VP_IDE: IDE controller on PCI bus 00 dev 21 <4>VP_IDE: chipset revision 6 <4>VP_IDE: not 100%% native mode: will probe irqs later <4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>VP_IDE: VIA vt82c686a (rev 1b) IDE UDMA66 controller on pci00:04.1 <4> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA <4> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA <4>hda: IBM-DTLA-307015, ATA DISK drive <4>hdb: FUJITSU MPE3136AT, ATA DISK drive <4>hdc: Pioneer DVD-ROM ATAPIModel DVD-115 0108, ATAPI CD/DVD-ROM drive <4>hdd: YAMAHA CRW4416E, ATAPI CD/DVD-ROM drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <6>hda: 30003120 sectors (15362 MB) w/1916KiB Cache, CHS=1867/255/63 <6>hdb: 26688576 sectors (13665 MB) w/512KiB Cache, CHS=1661/255/63 <4>hdc: ATAPI DVD-ROM drive, 512kB Cache <6>Uniform CD-ROM driver Revision: 3.12 <4>hdd: ATAPI 16X CD-ROM CD-R/RW drive, 2048kB Cache <6>Partition check: <6> hda: hda1 hda2 < hda5 > <6> hdb: hdb1 hdb2 hdb3 hdb4 <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <6>loop: loaded (max 8 devices) <6>Serial driver version 5.05a (2001-03-20) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>ttyS01 at 0x02f8 (irq = 3) is a 16550A <6>Real Time Clock Driver v1.10d <6>SCSI subsystem driver Revision: 1.00 <3>request_module[scsi_hostadapter]: Root fs not mounted <3>request_module[scsi_hostadapter]: Root fs not mounted <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <4>IP: routing cache hash table of 2048 buckets, 16Kbytes <4>TCP: Hash tables configured (established 16384 bind 16384) <6>Linux IP multicast router 0.06 plus PIM-SM <3>IP-Config: No network devices available. <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <4>VFS: Mounted root (ext2 filesystem) readonly. <4>Freeing unused kernel memory: 112k freed <6>Adding Swap: 208836k swap-space (priority 42) <6>aha152x: BIOS test: passed, detected 1 controller(s) <4>aha152x: resetting bus... <6>aha152x0: vital data: rev=3, io=0x140 (0x140/0x140), irq=10, scsiid=7, reconnect=disabled, parity=enabled, synchronous=disabled, delay=1000, extended translation=disabled <6>aha152x0: trying software interrupt, ok. <6>scsi0 : Adaptec 152x SCSI driver; $Revision: 2.4 $ <4> Vendor: AGFA Model: SNAPSCAN 1236 Rev: 1.30 <4> Type: Scanner ANSI SCSI revision: 02 <6>scsi1 : SCSI host adapter emulation for IDE ATAPI devices Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started at Tue Sep 4 19:21:39 2001 Activating swap-devices in /etc/fstab... doneChecking file systems... Parallelizing fsck version 1.19a (13-Jul-2000) /dev/hdb4: clean, 99232/662560 files, 421386/1323354 blocks /dev/hdb1: clean, 32/4016 files, 3735/16033 blocks /dev/hdb3: clean, 1119/28224 files, 40374/112455 blocks doneMounting local file systems... proc on /proc type proc (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/hdb1 on /boot type ext2 (rw) /dev/hdb3 on /home type ext2 (rw) doneActivating remaining swap-devices in /etc/fstab... doneSetting up the CMOS clockdone Setting up timezone datadone Setting up loopback devicedone Setting up hostnamedone Mount SHM FS on /dev/shmdone Configuring serial ports... ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Configured serial ports doneRunning /etc/init.d/boot.local doneCreating /var/log/boot.msg doneEnabling syn flood protectiondone Disabling IP forwardingdone Boot logging started at Tue Sep 4 19:21:50 2001 Master Resource Control: previous runlevel: N, switching to runlevel: 5 Enabling ide dma mode: hda hdbdone Starting personal-firewall (initial) [active]done Initializing random number generatordone Starting RPC portmap daemondone Starting SSH daemondone Starting syslog servicesdone Starting lpddone Starting service usbmgr done Starting service at daemon:done Loading keymap qwerty/uk.map.gz doneLoading compose table winkeys shiftctrl latin1.adddone Loading console font lat9w-16.psfu doneLoading screenmap trivial doneSetting up console ttys doneStarting CRON daemondone Starting Name Service Cache Daemondone Starting service kdmdone Starting personal-firewall (final) [active]done Starting sound driver: snd-card-emu10k1 done Restoring the previous sound settingdone Master Resource Control: runlevel 5 has been reached Skipped services in runlevel 5: pcmcia /dev/hdb4 / ext2 defaults 1 1 /dev/hdb1 /boot ext2 defaults 1 2 /dev/cdrecorder /media/cdrecorder auto ro,noauto,user,exec 0 0 /dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0 devpts /dev/pts devpts defaults 0 0 /dev/dvd /media/dvd auto ro,noauto,user,exec 0 0 /dev/hdb3 /home ext2 defaults 1 2 /dev/fd0 /media/floppy auto noauto,user,sync 0 0 proc /proc proc defaults 0 0 /dev/hda1 /windows/C vfat noauto,user 0 0 /dev/hda5 /windows/D vfat noauto,user 0 0 /dev/hdb2 swap swap pri=42 0 0 The mount command for cdrom & cdrecorder give 'unknown device' as I have linked them with with scd0 & scd1 Regards Peter