Message-ID: <3A17A126.C9B8C62B@citeweb.net>
Date: Sun, 19 Nov 2000 10:45:10 +0100
From: charlie ti
Subject: CD writer problem
Hi everybody
when i start my computer i've got this error message for my CD writer
(hdc) :
<4>ATAPI device hdc:
<4> Error: Not ready -- (Sense key=0x02)
<4> (reserved error code) -- (asc=0x3a, ascq=0x01)
<4> The failed "Read Cd/Dvd Capacity" packet command was:
<4> "25 00 00 00 00 00 00 00 00 00 00 00 "
what does it mean and how can i fix it?
If necessary here is the all /var/log/boot.msg :
Inspecting /boot/System.map-2.2.16
Loaded 9150 symbols from /boot/System.map-2.2.16.
Symbols match kernel version 2.2.16.
Loaded 7 symbols from 1 module.
klogd 1.3-3, log source = ksyslog started.
<4>Linux version 2.2.16 (root@Laptop.suse.de) (gcc version 2.95.2
19991024 (release)) #1 Wed Aug 2 20:03:33 GMT 2000
<4>Detected 501141 kHz processor.
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 999.42 BogoMIPS
<4>Memory: 257220k/262080k available (1460k kernel code, 416k reserved,
2916k data, 68k init, 0k bigmem)
<4>Dentry hash table entries: 32768 (order 6, 256k)
<4>Buffer cache hash table entries: 262144 (order 8, 1024k)
<4>Page cache hash table entries: 65536 (order 6, 256k)
<5>VFS: Diskquotas version dquot_6.4.0 initialized
<4>CPU: Intel Pentium III (Katmai) stepping 03
<6>Checking 386/387 coupling... OK, FPU using exception 16 error
reporting.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
<4>PCI: PCI BIOS revision 2.10 entry at 0xf08b0, last bus=1
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<6>Linux NET4.0 for Linux 2.2
<6>Based upon Swansea University Computer Society NET3.039
<6>NET4: Unix domain sockets 1.0 for Linux NET4.0.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<4>TCP: Hash tables configured (ehash 262144 bhash 65536)
<4>Initializing RT netlink socket
<4>Starting kswapd v 1.5
<6>Detected PS/2 Mouse Port.
<4>pty: 256 Unix98 ptys configured
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13)
<6>Real Time Clock Driver v1.09
<4>RAM disk driver initialized: 16 RAM disks of 64000K size
<6>loop: registered device at major 7
<6>Uniform Multi-Platform E-IDE driver Revision: 6.30
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
<4>PIIX4: IDE controller on PCI bus 00 dev 21
<4>PIIX4: chipset revision 1
<4>PIIX4: not 100% native mode: will probe irqs later
<4> ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
<4> ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
<4>PDC20262: IDE controller on PCI bus 00 dev 68
<4>PDC20262: chipset revision 1
<4>PDC20262: not 100% native mode: will probe irqs later
<4> ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hde:pio, hdf:pio
<4> ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdg:pio, hdh:pio
<4>hda: Pioneer DVD-ROM ATAPIModel DVD-103S 011, ATAPI CDROM drive
<4>hdc: YAMAHA CRW4001, ATAPI CDROM drive
<4>hde: IBM-DJNA-371350, ATA DISK drive
<4>hdg: ST310210A, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>ide2 at 0xb800-0xb807,0xb402 on irq 9
<4>ide3 at 0xb000-0xb007,0xa802 on irq 9
<6>hde: IBM-DJNA-371350, 12949MB w/1966kB Cache, CHS=26310/16/63
<6>hdg: ST310210A, 9729MB w/2048kB Cache, CHS=19767/16/63
<4>hda: ATAPI DVD-ROM drive, 512kB Cache
<6>Uniform CD-ROM driver Revision: 3.11
<4>hdc: ATAPI 6X CD-ROM CD-R/RW drive, 2048kB Cache
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<6>LVM version 0.8e by Heinz Mauelshagen (4/1/2000)
<4>lvm -- Driver successfully initialized
<4>md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
<4>linear personality registered
<4>raid0 personality registered
<4>raid1 personality registered
<4>raid5 personality registered
<4>scsi0 : SCSI host adapter emulation for IDE ATAPI devices
<4>scsi : 1 host.
<4>scsi : detected total.
<4>Partition check:
<4>ATAPI device hdc:
<4> Error: Not ready -- (Sense key=0x02)
<4> (reserved error code) -- (asc=0x3a, ascq=0x01)
<4> The failed "Read Cd/Dvd Capacity" packet command was:
<4> "25 00 00 00 00 00 00 00 00 00 00 00 "
<4> hde: [PTBL] [1027/255/63] hde1 hde2 < hde5 hde6 >
<4> hdg: hdg1 hdg2 hdg3 hdg4 < hdg5 hdg6 >
<4>VFS: Mounted root (ext2 filesystem) readonly.
<4>Freeing unused kernel memory: 68k freed
<6>Adding Swap: 130496k swap-space (priority -1)
<6>Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ
enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Thanks
charlie ti
