"Moritz" == Moritz Lennert
writes:
> I have a ISA NE2000 Ethernet adapter. > During installation I declared it as eth0 device, but everytime > I boot I get the message that the device is busy and so my > network connection doesn't work. It sounds like an irq conflict. If your card is a PNP card, you could try the ISA PNP package. If not, then you will have to find an unused irq and then set the card manually. You should then specify the options in /etc/modules.conf. For example, mine is: options ne io=0x280 irq=11 You can find out which irq's have been occupied by typing cat /proc/interrupts at the command prompt and you can see what ioports have been occupied by typing cat /proc/ioports Charles -- ===================================================== One Net to rule them all, One Net to find them, One Net to bring them all, and with Linux bind them. ===================================================== -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/