January 2009 - openSUSE Virtual - openSUSE Mailing Lists

[opensuse-virtual] Re: virtio(_net) issue
by Frans de Boer 30 Jan '09

30 Jan '09

On Fri, 2009-01-30 at 10:54 +0000, Mark McLoughlin wrote: > Hi Frans, > > Please re-post to the list. > > On Fri, 2009-01-30 at 11:43 +0100, Frans de Boer wrote: > > The message is 'partial csum error 65280/29754 len=42' this time. > > Are you sure it's not: > > bad partial csum: 65280/29754 len=42 > > Thanks, > Mark. > Ok, the correct message was: 'bad partial csum: 65280/29754 len=43' Ciao, Frans. -- To unsubscribe, e-mail: opensuse-virtual+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-virtual+help(a)opensuse.org

1 0

[opensuse-virtual] Re: virtio(_net) issue
by Frans de Boer 30 Jan '09

30 Jan '09

On Fri, 2009-01-30 at 09:06 +0000, Mark McLoughlin wrote: > On Thu, 2009-01-29 at 10:06 +0100, Frans de Boer wrote: > > After many posts elsewhere - and no single reaction - I try this forum. > > > > I use SuSE 11.0 and 11.1 with the latest kernel (.28.2) and before in > > both host and the guest. After installing an image using '-net > > nic,model=e1000....' I changed the previous model to 'virtio'. After a > > restart, I do get a IP address assigned but also csum errors upon > > initialization. After I logged in, ifconfig show fine data, but I am > > unable to get any IP traffic with anything but itself. > > > > Can anybody shed some light on it? > > What version of kvm-userspace is this? What exactly are the csum errors? > > It kind of sounds like an issue we fixed some time ago: > > http://www.mail-archive.com/kvm@vger.kernel.org/msg02794.html > > Cheers, > Mark. The message is 'partial csum error 65280/29754 len=42' this time. The numbers vary. But even if I make it a static address, I can't communicate. Only changing things back to 'model=e1000' and all is working again. I don't now what version of kvm-userspace is used. I (try to) use the KVM83 and before the KVM82 packages. I can't try the QEMU SVN, because of missing KVM capabilities (even when using the latest 2.6.28.2 kernel). So, any more suggestions? Ciao, Frans. -- To unsubscribe, e-mail: opensuse-virtual+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-virtual+help(a)opensuse.org

1 0

[opensuse-virtual] Again: using virtio(_net), KVM and QEMU
by Frans de Boer 28 Jan '09

28 Jan '09

Using Suse 11.0 and 11.1, I try to use the virtio network device. However, does anybody has an idea how to set this up under SuSE, since suse complains that it needs an physical eth0 or wlan0 device and does not allow to setup the virtio network device. I did install the VM, changed to the '-net nic,model=virtio' option and....I do get an IP address but no network traffic anymore. Oh yes, I use the KVM83 package with QEMU. Any suggestions? Thanks, Frans. -- To unsubscribe, e-mail: opensuse-virtual+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-virtual+help(a)opensuse.org

1 0

RE: [opensuse-virtual] How to use virt-manager as non-root? (VirtPolicyKit?)
by Andrew Foulsham 27 Jan '09

27 Jan '09

At the risk of suggesting an obvious solution, why not run virt-manager via kdesu? I always log in remotely as a normal user and then use su for any admin tasks. Best wishes Andrew Foulsham Powered by Intellisync From: PGNet <pgnet.trash+osvm(a)gmail.com> Date: 26/01/09 22:35 To: opensuse-virtual(a)opensuse.org <opensuse-virtual(a)opensuse.org> Subject: [opensuse-virtual] How to use virt-manager as non-root? (VirtPolicyKit?) I'm connecting to a remote Opensuse 11.1 box remotely, using nxclient. Using VNC (now disable), I was able to login as root and run @KDE4, virt-manager without problem. xn does not permit root login, so i'm logged in as a normal user. unfortunately, @ virt-manager launch, I get a dialog: Unable to open a connection to the Xen hypervisor/daemon. Verify that: - A Xen host kernel was booted - The Xen service has been started Detail: Unable to open connection to hypervisor URI 'xen:///': <class 'libvirt.libvirtError'> unable to connect to '/var/run/libvirt/libvirt-sock': Connection ref Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/connection.py", line 325, in _open_thread self.vmm = libvirt.openReadOnly(self.uri) File "/usr/lib64/python2.6/site-packages/libvirt.py", line 149, in openReadOnly if ret is None:raise libvirtError('virConnectOpenReadOnly() failed') libvirtError: unable to connect to '/var/run/libvirt/libvirt-sock': Connection refused digging, I find @ http://fedoraproject.org/wiki/Features/VirtPolicyKit "The virt-manager application currently runs as root when managing a local hypervisor. It uses console-helper to authentication from a desktop session. Running GTK applications as root is evil. By integrating with PolicyKit it will be possible to run virt-manager as a regular user" Obviously, for Fedora9. Does this apply for Opensuse 11.1, as well? I'm reading thru the referenced, http://libvirt.org/auth.html Is this the right approach under OS 11.1? Thanks. -- To unsubscribe, e-mail: opensuse-virtual+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-virtual+help(a)opensuse.org -- To unsubscribe, e-mail: opensuse-virtual+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-virtual+help(a)opensuse.org

3 2

[opensuse-virtual] How to use virt-manager as non-root? (VirtPolicyKit?)
by PGNet 27 Jan '09

27 Jan '09

I'm connecting to a remote Opensuse 11.1 box remotely, using nxclient. Using VNC (now disable), I was able to login as root and run @KDE4, virt-manager without problem. xn does not permit root login, so i'm logged in as a normal user. unfortunately, @ virt-manager launch, I get a dialog: Unable to open a connection to the Xen hypervisor/daemon. Verify that: - A Xen host kernel was booted - The Xen service has been started Detail: Unable to open connection to hypervisor URI 'xen:///': <class 'libvirt.libvirtError'> unable to connect to '/var/run/libvirt/libvirt-sock': Connection ref Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/connection.py", line 325, in _open_thread self.vmm = libvirt.openReadOnly(self.uri) File "/usr/lib64/python2.6/site-packages/libvirt.py", line 149, in openReadOnly if ret is None:raise libvirtError('virConnectOpenReadOnly() failed') libvirtError: unable to connect to '/var/run/libvirt/libvirt-sock': Connection refused digging, I find @ http://fedoraproject.org/wiki/Features/VirtPolicyKit "The virt-manager application currently runs as root when managing a local hypervisor. It uses console-helper to authentication from a desktop session. Running GTK applications as root is evil. By integrating with PolicyKit it will be possible to run virt-manager as a regular user" Obviously, for Fedora9. Does this apply for Opensuse 11.1, as well? I'm reading thru the referenced, http://libvirt.org/auth.html Is this the right approach under OS 11.1? Thanks. -- To unsubscribe, e-mail: opensuse-virtual+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-virtual+help(a)opensuse.org

2 2

[opensuse-virtual] What HVM-specific code IDs a DomU/guest cpu as 64-bit?
by PGNet 24 Jan '09

24 Jan '09

I'm running Opensuse 11.1-RELEASE, uname -a Linux server 2.6.27.7-9-xen #1 SMP 2008-12-04 18:10:04 +0100 x86_64 x86_64 x86_64 GNU/Linux On this X86_64 hardware, I can use/install in the following scenarios, with no problems: 64-bit OS 11.1, 64-bit kernel-default OK 64-bit OS 11.1, 64-bit kernel-xen, Dom0 OK 64-bit OS 11.1, 64-bit Dom0 + 64-bit Linux/PV DomU OK 64-bit OS Windows7 (beta) OK If I attempt 64-bit HVM DomU installs, with pae=0 in config, for three cases, (1) 64-bit OS 11.1, 64-bit Dom0 + 64-bit Windows7/HVM(pae=0) DomU fails @, win7 Virtual Machine Console Windows Boot Manager File: \windows\system32\boot\winload.exe Status: 0xc000035a Info: Attempting to load a 64-bit application, however this CPU is not compatible with 64-bit mode (2) 64-bit OS 11.1, 64-bit Dom0 + 64-bit WinVista/HVM(pae=0) DomU fails @, (same error as above) and, (3) 64-bit OS 11.1, 64-bit Dom0 + 64-bit Opensuse 11.1/HVM(pae=0) DomU fails @, OpenSuse installer "Cool software but, This is a 32-bit computer. You cannot use 64-bit software on it." I've been told that the problem is the mobo BIOS, namely "BIOS Masking" of the amd-v extensions. I'd like to document the issue in comms to the h/w vendor and identify the code that's looking for the BIOS-specified amd-v extensions. Poking around in opensuse 11.1, I note in cd /usr/src/linux-2.6.27.7-9/arch/x86 grep -rlni svm kvm/ kvm/svm.h kvm/svm.c kvm/kvm_svm.h kvm/Kconfig kvm/Makefile but, grep -rlni svm xen/ returns (empty). checking in xen hg source, I find, cd xen-3.3.1-testing find . | grep svm ./tools/ioemu-remote/target-i386/svm.h ./xen/include/asm-x86/hvm/svm ./xen/include/asm-x86/hvm/svm/amd-iommu-acpi.h ./xen/include/asm-x86/hvm/svm/emulate.h ./xen/include/asm-x86/hvm/svm/svm.h ./xen/include/asm-x86/hvm/svm/amd-iommu-defs.h ./xen/include/asm-x86/hvm/svm/asid.h ./xen/include/asm-x86/hvm/svm/vmcb.h ./xen/include/asm-x86/hvm/svm/amd-iommu-proto.h ./xen/include/asm-x86/hvm/svm/intr.h ./xen/arch/x86/hvm/svm ./xen/arch/x86/hvm/svm/svm.c ./xen/arch/x86/hvm/svm/Makefile ./xen/arch/x86/hvm/svm/entry.S ./xen/arch/x86/hvm/svm/vmcb.c ./xen/arch/x86/hvm/svm/asid.c ./xen/arch/x86/hvm/svm/intr.c ./xen/arch/x86/hvm/svm/emulate.c svm-related source files clearly exist for the hvm code, and in the kvm-related opensuse linux source. it *seems* that related source is missing from the opensuse xen source (?). under non-xen, kernel-default, cat /proc/cpuinfo | grep -i svm flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow rep_good nopl pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy 3dnowprefetch under kernel-xen, xen 'says' svm is enabled/available, xm dmesg | grep -i svm (XEN) AMD SVM: ASIDs enabled. (XEN) HVM: SVM enabled (XEN) AMD SVM: ASIDs enabled. so, clearly, something's been communicated to the Dom0 about svm capability. but, oddly, cat /proc/cpuinfo | grep -i svm (empty) "something" is not hearing from BIOS about the 64-bit-ness of the CPU. either the "listening" code (kernel? xen? other?) is missing, &/or the BIOS isn't "speaking" the right/complete info in the first place. -- To unsubscribe, e-mail: opensuse-virtual+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-virtual+help(a)opensuse.org

1 0

[opensuse-virtual] Setting up a virtio(_net) device
by Frans de Boer 23 Jan '09

23 Jan '09

Using Suse 11.0 and 11.1, I try to use the virtio network device. However, does anybody has an idea how to set this up under SuSE, since suse complains that it needs an physical eth0 or wlan0 device and does not allow to setup the virtio network device. Any suggestions? Thanks, Frans. -- To unsubscribe, e-mail: opensuse-virtual+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-virtual+help(a)opensuse.org

1 0

[opensuse-virtual] [opensuse] i loose keyboard keys while running vmware with opensuse installation (fwd)
by Carlos E. R. 23 Jan '09

23 Jan '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 hi, i'm installing 11.1 on a vmware server virtual machine, and i loose part of the keyboard - shift, alt, ctrl. i can't type uppercase, etc. i have to close session to restore. ideas this does not happens when vm runs windows guest. This is a real nuisance. As you see above, I loose the ability to use shift, control, and alt keys, at least. I can't even type emails correctly. Now, the guest 11.1 is fully installed with guest additions, but now and then it "influences" the host 11.0 and I loose those keys. Any ideas, please? - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (GNU/Linux) iEYEARECAAYFAkl5phcACgkQtTMYHG2NR9VPvQCdGhYBMJ4f0VQYoTZMeWTz5KfS FMkAni1oD6m8WyA4DDAwCmju0QuBIEJL =ujj6 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-virtual+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-virtual+help(a)opensuse.org

1 0

[opensuse-virtual] Anyone have a working .cfg for Win7, 64bit in OS11.1/Xen3.3.1 HVM DomU?
by sc 20 Jan '09

20 Jan '09

I'm trying to get Win7/Beta installed in HVM. I'm using a .cfg patched together from online for older Xen & Win versions on other OS. (Good bet that something's wrong with it) name = 'win7' kernel = '/usr/lib/xen/boot/hvmloader' builder = 'hvm' disk = [ 'file:/home/xen/win7/win7.img,hda,w', 'phy:/dev/cdrom,hdc:cdrom,r' ] boot = 'dc' vif = [ 'type=ioemu, bridge=br1' ] vfb = [ 'type=vnc, vncdisplay=1, vnclisten=127.0.0.1' ] extra = 'textmode=1 xencons=xvc0' memory = 512 shadow_memory = 8 vcpus = 1 device_model = '/usr/lib64/xen/bin/qemu-dm' netif = 'yes' acpi = 1 apic = 1 stdvga = 0 serial = 'pty' on_shutdown = 'destroy' on_reboot = 'destroy' on_crash = 'destroy' On exec it starts but gets no further than xm create -c win7.cfg Using config file "win7.cfg". Started domain win7 VNC from my desktop can't connect at all to the Win VNC server. Xen log tails don't tell me very much ==> xen-hotplug.log <== Nothing to flush. ==> xend.log <== [2009-01-15 10:48:10 4525] DEBUG (XendDomainInfo:2769) Storing VM details: {'on_xend_stop': 'ignore', 'shadow_memory': '8', 'uuid': '7facf44a-5d28-1b81-3a12-a0479879ffe4', 'on_reboot': 'destroy', 'start_time': '1232045290.0', 'on_poweroff': 'destroy', 'on_xend_start': 'ignore', 'on_crash': 'destroy', 'xend/restart_count': '0', 'vcpus': '1', 'vcpu_avail': '1', 'image': "(hvm (kernel ) (args 'textmode=1 xencons=xvc0') (timer_mode 0) (nographic 0) (hpet 0) (rtc_timeoffset 0) (guest_os_type default) (loader /usr/lib/xen/boot/hvmloader) (pci ()) (apic 1) (serial pty) (extid 0) (hap 1) (monitor 0) (device_model /usr/lib64/xen/bin/qemu-dm) (boot dc) (display localhost:10.0) (keymap en-us) (pae 1) (stdvga 0) (usb 0) (xauthority /root/.Xauthority) (isa 0) (acpi 1) (vncunused 1) (localtime 0) (notes (SUSPEND_CANCEL 1)))", 'name': 'win7'} [2009-01-15 10:48:10 4525] DEBUG (XendDomainInfo:1392) Storing domain details: {'console/port': '3', 'name': 'win7', 'console/limit': '1048576', 'store/port': '2', 'vm': '/vm/7facf44a-5d28-1b81-3a12-a0479879ffe4', 'domid': '15', 'image/suspend-cancel': '1', 'cpu/0/availability': 'online', 'memory/target': '524288', 'control/platform-feature-multiprocessor-suspend': '1', 'store/ring-ref': '131069', 'console/type': 'ioemu'} [2009-01-15 10:48:10 4525] DEBUG (DevController:122) DevController: writing {'state': '1', 'backend-id': '0', 'backend': '/local/domain/0/backend/console/15/0'} to /local/domain/15/device/console/0. [2009-01-15 10:48:10 4525] DEBUG (DevController:124) DevController: writing {'domain': 'win7', 'frontend': '/local/domain/15/device/console/0', 'uuid': '0241eb7f-6ae8-8cb9-9b63-8e88ef34e333', 'frontend-id': '15', 'state': '1', 'location': '3', 'online': '1', 'protocol': 'vt100'} to /local/domain/0/backend/console/15/0. [2009-01-15 10:48:14 4525] DEBUG (DevController:166) Waiting for devices vif. [2009-01-15 10:48:14 4525] DEBUG (DevController:171) Waiting for 0. [2009-01-15 10:48:14 4525] DEBUG (XendDomainInfo:1476) XendDomainInfo.handleShutdownWatch [2009-01-15 10:48:14 4525] DEBUG (DevController:681) hotplugStatusCallback /local/domain/0/backend/vif/15/0/hotplug-status. [2009-01-15 10:48:14 4525] DEBUG (DevController:695) hotplugStatusCallback 1. [2009-01-15 10:48:14 4525] DEBUG (DevController:166) Waiting for devices vkbd. [2009-01-15 10:48:14 4525] DEBUG (DevController:166) Waiting for devices ioports. [2009-01-15 10:48:14 4525] DEBUG (DevController:166) Waiting for devices tap. [2009-01-15 10:48:14 4525] DEBUG (DevController:166) Waiting for devices console. [2009-01-15 10:48:14 4525] DEBUG (DevController:171) Waiting for 0. [2009-01-15 10:48:14 4525] DEBUG (DevController:166) Waiting for devices vscsi. [2009-01-15 10:48:14 4525] DEBUG (DevController:166) Waiting for devices vbd. [2009-01-15 10:48:14 4525] DEBUG (DevController:171) Waiting for 768. [2009-01-15 10:48:14 4525] DEBUG (DevController:681) hotplugStatusCallback /local/domain/0/backend/vbd/15/768/hotplug-status. [2009-01-15 10:48:14 4525] DEBUG (DevController:695) hotplugStatusCallback 1. [2009-01-15 10:48:14 4525] DEBUG (DevController:171) Waiting for 5632. [2009-01-15 10:48:14 4525] DEBUG (DevController:681) hotplugStatusCallback /local/domain/0/backend/vbd/15/5632/hotplug-status. [2009-01-15 10:48:14 4525] DEBUG (DevController:695) hotplugStatusCallback 1. [2009-01-15 10:48:14 4525] DEBUG (DevController:166) Waiting for devices irq. [2009-01-15 10:48:14 4525] DEBUG (DevController:166) Waiting for devices vfb. [2009-01-15 10:48:14 4525] DEBUG (DevController:166) Waiting for devices pci. [2009-01-15 10:48:14 4525] DEBUG (DevController:166) Waiting for devices vtpm. [2009-01-15 10:48:14 4525] INFO (XendDomain:1175) Domain win7 (15) unpaused. Anyone have any suggestions as to what's wrong with my cfg above, or better yet a working cfg? -sc -- To unsubscribe, e-mail: opensuse-virtual+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-virtual+help(a)opensuse.org

3 4

[opensuse-virtual] domU exec via 'xm create' hangs only after migration opensuse 11.0 -> 11.1
by PGNet 13 Jan '09

13 Jan '09

i've migrated from opensuse 11.0 -> 11.1, uname -a Linux server 2.6.27.7-9-xen #1 SMP 2008-12-04 18:10:04 +0100 x86_64 x86_64 x86_64 GNU/Linux i'm now trying to get xen domu's working. as in my previous 11.0 setup, i've built up & populated a 'template' domU image, using autoyast. i launch the runtime, which worked fine under 11.0, xm create -c os11t.cfg where, cat os11t.cfg name = 'os11t' builder = 'linux' bootloader = '/usr/lib/xen/boot/domUloader.py' bootargs = '--entry=xvda1:vmlinuz-xen,/boot/initrd-xen' disk = [ 'phy:/dev/guests/os11t,xvda,w', ] boot = 'c' root = '/dev/system/root' vif = [ 'mac=00:16:3E:10:00:99, bridge=brMB, vifname=vifT.INT', ] vfb = [ 'type=vnc, vncdisplay=99, vnclisten=127.0.0.1' ] extra = 'textmode=1 xencons=xvc0' maxmem = 512 memory = 512 vcpus = 1 localtime = 0 on_shutdown = 'destroy' on_reboot = 'restart' on_crash = 'restart' now, under 11.1, the guest launch gets to type=1505 audit(1231755043.704:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=958 then simply hangs, requiring kill(s) or reboot to recover. @ the hang, the dom0's still alive. checking, I see, xm list Name ID Mem VCPUs State Time(s) Domain-0 0 512 2 r----- 66.5 os11t 1 512 1 -b---- 24.5 any hints as to what the problem might be, or where/what to start debugging? perhaps required config changed? thanks. @ console --------- xm create -c os11t.cfg Using config file "./os11t.cfg". Copy kernel /vmlinuz-xen from xvda1 to /var/lib/xen/tmp/kernel.8khnT1 for booting Started domain os11t Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.27.7-9-xen (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100 Command line: root=/dev/system/root textmode=1 xencons=xvc0 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls Xen-provided physical RAM map: Xen: 0000000000000000 - 0000000020800000 (usable) last_pfn = 0x20800 max_arch_pfn = 0xdffffff init_memory_mapping last_map_addr: 20800000 end: 20800000 RAMDISK: 007e3000 - 01377000 ACPI in unprivileged domain disabled (3 early reservations) ==> bootmem [0000000000 - 0020000000] #0 [0000200000 - 00007e20b8] TEXT DATA BSS ==> [0000200000 - 00007e20b8] #1 [00007e3000 - 0001489000] Xen provided ==> [00007e3000 - 0001489000] #2 [0001489000 - 0001590000] PGTABLE ==> [0001489000 - 0001590000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00020800 PERCPU: Allocating 44064 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 131040 Kernel command line: root=/dev/system/root textmode=1 xencons=xvc0 Initializing CPU#0 PID hash table entries: 2048 (order: 11, 16384 bytes) Xen reported: 2109.602 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled console [xvc-1] enabled Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Software IO TLB disabled Memory: 494592k/532480k available (2485k kernel code, 29244k reserved, 2189k data, 272k init) Calibrating delay using timer specific routine.. 4223.84 BogoMIPS (lpj=8447685) Security Framework initialized SELinux: Disabled at boot. AppArmor: AppArmor initialized Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 SMP alternatives: switching to UP code Freeing SMP alternatives: 23k freed Brought up 1 CPUs net_namespace: 1936 bytes NET: Registered protocol family 16 Brought up 1 CPUs PCI: Fatal: No config space access function found PCI: setting up Xen PCI frontend stub ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled suspend: event channel 8 xen_mem: Initialising balloon driver. PCI: System does not support PCI PCI: System does not support PCI AppArmor: AppArmor Filesystem Enabled ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread FFFF88001F83E040 could not acquire Mutex [1] [20080609] NET: Registered protocol family 2 IP route cache hash table entries: 16384 (order: 5, 131072 bytes) TCP established hash table entries: 65536 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... done Freeing initrd memory: 11856k freed platform rtc_cmos: registered platform RTC device (no PNP device found) audit: initializing netlink socket (disabled) type=2000 audit(1231754992.760:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 261 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Non-volatile memory driver v1.2 Xen virtual console successfully installed as xvc0 Event-channel device installed. Console: switching to colour frame buffer device 100x37 console [tty0] enabled input: Xen Virtual Keyboard as /devices/virtual/input/input0 input: Xen Virtual Pointer as /devices/virtual/input/input1 PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice TCP cubic registered registered taskstats version 1 XENBUS: Device with no driver: device/vbd/51712 XENBUS: Device with no driver: device/vif/0 XENBUS: Device with no driver: device/console/0 Freeing unused kernel memory: 272k freed Write protecting the kernel read-only data: 4420k xen-vbd: registered block device major 202 blkfront: xvda: barriers enabled xvda: xvda1 xvda2 netfront: Initialising virtual ethernet driver. thermal: Unknown symbol acpi_processor_set_thermal_limit device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel(a)redhat.com udevd version 128 started md: linear personality registered for level -1 kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. udevd version 128 started rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 Adding 524280k swap on /dev/mapper/system-swap. Priority:-1 extents:1 across:524280k EXT3 FS on dm-0, internal journal loop: module loaded kjournald starting. Commit interval 5 seconds EXT3 FS on xvda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. fuse init (API version 7.9) type=1505 audit(1231755042.029:2): operation="profile_load" name="/bin/ping" name2="default" pid=912 type=1505 audit(1231755042.348:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=915 type=1505 audit(1231755042.476:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=916 type=1505 audit(1231755042.665:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=918 type=1505 audit(1231755042.788:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=919 type=1505 audit(1231755042.876:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=920 type=1505 audit(1231755043.093:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=922 type=1505 audit(1231755043.293:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=936 type=1505 audit(1231755043.576:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=945 type=1505 audit(1231755043.704:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=958 --------- log tails in /var/log/xen ---------- ==> xend.log <== [2009-01-12 10:09:48 4653] DEBUG (XendDomainInfo:91) XendDomainInfo.create(['vm', ['name', 'os11t'], ['memory', 512], ['maxmem', 512], ['on_reboot', 'restart'], ['on_crash', 'restart'], ['vcpus', 1], ['on_xend_start', 'ignore'], ['on_xend_stop', 'ignore'], ['bootloader', '/usr/lib/xen/boot/domUloader.py'], ['bootloader_args', '--entry=xvda1:vmlinuz-xen,/boot/initrd-xen'], ['image', ['linux', ['root', '/dev/system/root'], ['args', 'textmode=1 xencons=xvc0']]], ['device', ['vbd', ['uname', 'phy:/dev/guests/os11t'], ['dev', 'xvda'], ['mode', 'w']]], ['device', ['vif', ['bridge', 'brMB'], ['mac', '00:16:3E:10:00:99'], ['vifname', 'vifT.INT']]], ['device', ['vkbd']], ['device', ['vfb', ['vnclisten', '127.0.0.1'], ['type', 'vnc'], ['vncdisplay', '99'], ['display', 'localhost:10.0'], ['xauthority', '/root/.Xauthority']]]]) [2009-01-12 10:09:48 4653] DEBUG (XendDomainInfo:2060) XendDomainInfo.constructDomain [2009-01-12 10:09:48 4653] DEBUG (balloon:151) Balloon: 7539424 KiB free; need 2048; done. [2009-01-12 10:09:48 4653] DEBUG (XendDomain:450) Adding Domain: 1 [2009-01-12 10:09:48 4653] DEBUG (XendDomainInfo:2224) XendDomainInfo.initDomain: 1 256 [2009-01-12 10:09:48 4866] DEBUG (XendBootloader:117) Launching bootloader as ['/usr/lib/xen/boot/domUloader.py', '--args=root=/dev/system/root textmode=1 xencons=xvc0', '--output=/var/run/xend/boot/xenbl.18912', '--entry=xvda1:vmlinuz-xen,/boot/initrd-xen', '/dev/guests/os11t']. ==> domain-builder-ng.log <== ### ----- xc domain builder logfile opened ----- xc_dom_allocate: cmdline="root=/dev/system/root textmode=1 xencons=xvc0", features="" xc_dom_kernel_file: filename="/var/lib/xen/tmp/kernel.8khnT1" xc_dom_malloc_filemap : 2172 kB xc_dom_malloc : 9369 kB xc_dom_do_gunzip: unzip ok, 0x21f058 -> 0x926770 xc_dom_ramdisk_file: filename="/var/lib/xen/tmp/ramdisk.NdHMgR" xc_dom_malloc_filemap : 5644 kB xc_dom_boot_xen_init: ver 3.3, caps xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64 xc_dom_parse_image: called xc_dom_find_loader: trying ELF-generic loader ... OK elf_parse_binary: phdr: paddr=0x200000 memsz=0x459000 elf_parse_binary: phdr: paddr=0x659000 memsz=0x71a38 elf_parse_binary: phdr: paddr=0x6cb000 memsz=0x888 elf_parse_binary: phdr: paddr=0x6cc000 memsz=0x1160b8 elf_parse_binary: memory: 0x200000 -> 0x7e20b8 elf_xen_parse_note: GUEST_OS = "linux" elf_xen_parse_note: GUEST_VERSION = "2.6" elf_xen_parse_note: XEN_VERSION = "xen-3.0" elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 elf_xen_parse_note: PADDR_OFFSET = 0x0 elf_xen_parse_note: ENTRY = 0xffffffff80200000 elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff80207000 elf_xen_parse_note: unknown xen elf note (0xd) elf_xen_parse_note: FEATURES = "writable_page_tables|writable_descriptor_tables|auto_translated_physmap|pae_pgdir_above_4gb|supervisor_mode_kernel" elf_xen_parse_note: LOADER = "generic" elf_xen_parse_note: SUSPEND_CANCEL = 0x1 elf_xen_addr_calc_check: addresses: virt_base = 0xffffffff80000000 elf_paddr_offset = 0x0 virt_offset = 0xffffffff80000000 virt_kstart = 0xffffffff80200000 virt_kend = 0xffffffff807e20b8 virt_entry = 0xffffffff80200000 xc_dom_parse_elf_kernel: xen-3.0-x86_64: 0xffffffff80200000 -> 0xffffffff807e20b8 xc_dom_mem_init: mem 512 MB, pages 0x20000 pages, 4k each xc_dom_mem_init: 0x20000 pages xc_dom_boot_mem_init: called x86_compat: guest xen-3.0-x86_64, address size 64 xc_dom_malloc : 1024 kB xc_dom_build_image: called xc_dom_alloc_segment: kernel : 0xffffffff80200000 -> 0xffffffff807e3000 (pfn 0x200 + 0x5e3 pages) xc_dom_pfn_to_ptr: domU mapping: pfn 0x200+0x5e3 at 0x7f914c26c000 elf_load_binary: phdr 0 at 0x0x7f914c26c000 -> 0x0x7f914c6c5000 elf_load_binary: phdr 1 at 0x0x7f914c6c5000 -> 0x0x7f914c736a38 elf_load_binary: phdr 2 at 0x0x7f914c737000 -> 0x0x7f914c737888 elf_load_binary: phdr 3 at 0x0x7f914c738000 -> 0x0x7f914c783c20 xc_dom_alloc_segment: ramdisk : 0xffffffff807e3000 -> 0xffffffff81377000 (pfn 0x7e3 + 0xb94 pages) xc_dom_pfn_to_ptr: domU mapping: pfn 0x7e3+0xb94 at 0x7f914b6d8000 xc_dom_do_gunzip: unzip ok, 0x583093 -> 0xb93010 xc_dom_alloc_segment: phys2mach : 0xffffffff81377000 -> 0xffffffff81477000 (pfn 0x1377 + 0x100 pages) xc_dom_pfn_to_ptr: domU mapping: pfn 0x1377+0x100 at 0x7f914b5d8000 xc_dom_alloc_page : start info : 0xffffffff81477000 (pfn 0x1477) xc_dom_alloc_page : xenstore : 0xffffffff81478000 (pfn 0x1478) xc_dom_alloc_page : console : 0xffffffff81479000 (pfn 0x1479) nr_page_tables: 0x0000ffffffffffff/48: 0xffff000000000000 -> 0xffffffffffffffff, 1 table(s) nr_page_tables: 0x0000007fffffffff/39: 0xffffff8000000000 -> 0xffffffffffffffff, 1 table(s) nr_page_tables: 0x000000003fffffff/30: 0xffffffff80000000 -> 0xffffffffbfffffff, 1 table(s) nr_page_tables: 0x00000000001fffff/21: 0xffffffff80000000 -> 0xffffffff817fffff, 12 table(s) xc_dom_alloc_segment: page tables : 0xffffffff8147a000 -> 0xffffffff81489000 (pfn 0x147a + 0xf pages) xc_dom_pfn_to_ptr: domU mapping: pfn 0x147a+0xf at 0x7f914b5c9000 xc_dom_alloc_page : boot stack : 0xffffffff81489000 (pfn 0x1489) xc_dom_build_image : virt_alloc_end : 0xffffffff8148a000 xc_dom_build_image : virt_pgtab_end : 0xffffffff81800000 xc_dom_boot_image: called arch_setup_bootearly: doing nothing xc_dom_compat_check: supported guest type: xen-3.0-x86_64 <= matches xc_dom_compat_check: supported guest type: xen-3.0-x86_32p xc_dom_compat_check: supported guest type: hvm-3.0-x86_32 xc_dom_compat_check: supported guest type: hvm-3.0-x86_32p xc_dom_compat_check: supported guest type: hvm-3.0-x86_64 xc_dom_update_guest_p2m: dst 64bit, pages 0x20000 clear_page: pfn 0x1479, mfn 0x214fd5 clear_page: pfn 0x1478, mfn 0x214fd6 xc_dom_pfn_to_ptr: domU mapping: pfn 0x1477+0x1 at 0x7f914b5c8000 start_info_x86_64: called setup_hypercall_page: vaddr=0xffffffff80207000 pfn=0x207 domain builder memory footprint allocated malloc : 10507 kB anon mmap : 0 bytes mapped file mmap : 7816 kB domU mmap : 18972 kB arch_setup_bootlate: shared_info: pfn 0x0, mfn 0xb72fb shared_info_x86_64: called vcpu_x86_64: called vcpu_x86_64: cr3: pfn 0x147a mfn 0x214fd4 launch_vm: called, ctxt=0x7f915082ad08 xc_dom_release: called ==> xend.log <== [2009-01-12 10:09:50 4653] DEBUG (image:302) No VNC passwd configured for vfb access [2009-01-12 10:09:50 4653] DEBUG (XendDomainInfo:2254) _initDomain:shadow_memory=0x0, memory_static_max=0x20000000, memory_static_min=0x0. [2009-01-12 10:09:50 4653] DEBUG (balloon:151) Balloon: 7539416 KiB free; need 526848; done. [2009-01-12 10:09:50 4653] INFO (image:166) buildDomain os=linux dom=1 vcpus=1 [2009-01-12 10:09:50 4653] DEBUG (image:641) domid = 1 [2009-01-12 10:09:50 4653] DEBUG (image:642) memsize = 512 [2009-01-12 10:09:50 4653] DEBUG (image:643) image = /var/lib/xen/tmp/kernel.8khnT1 [2009-01-12 10:09:50 4653] DEBUG (image:644) store_evtchn = 1 [2009-01-12 10:09:50 4653] DEBUG (image:645) console_evtchn = 2 [2009-01-12 10:09:50 4653] DEBUG (image:646) cmdline = root=/dev/system/root textmode=1 xencons=xvc0 [2009-01-12 10:09:50 4653] DEBUG (image:647) ramdisk = /var/lib/xen/tmp/ramdisk.NdHMgR [2009-01-12 10:09:50 4653] DEBUG (image:648) vcpus = 1 [2009-01-12 10:09:50 4653] DEBUG (image:649) features = [2009-01-12 10:09:50 4653] INFO (XendDomainInfo:1932) createDevice: vkbd : {'uuid': 'b53c7794-5215-c370-8e80-52d00d321479'} [2009-01-12 10:09:50 4653] DEBUG (DevController:122) DevController: writing {'protocol': 'x86_64-abi', 'state': '1', 'backend-id': '0', 'backend': '/local/domain/0/backend/vkbd/1/0'} to /local/domain/1/device/vkbd/0. [2009-01-12 10:09:50 4653] DEBUG (DevController:124) DevController: writing {'frontend-id': '1', 'domain': 'os11t', 'frontend': '/local/domain/1/device/vkbd/0', 'state': '1', 'online': '1'} to /local/domain/0/backend/vkbd/1/0. [2009-01-12 10:09:50 4653] INFO (XendDomainInfo:1932) createDevice: vfb : {'other_config': {'display': 'localhost:10.0', 'vnclisten': '127.0.0.1', 'type': 'vnc', 'xauthority': '/root/.Xauthority', 'vncdisplay': '99'}, 'xauthority': '/root/.Xauthority', 'vnclisten': '127.0.0.1', 'vncdisplay': '99', 'type': 'vnc', 'display': 'localhost:10.0', 'uuid': '5d22e2e9-bd13-7490-69de-c197cbeb1b25'} [2009-01-12 10:09:50 4653] DEBUG (DevController:122) DevController: writing {'protocol': 'x86_64-abi', 'state': '1', 'backend-id': '0', 'backend': '/local/domain/0/backend/vfb/1/0'} to /local/domain/1/device/vfb/0. [2009-01-12 10:09:50 4653] DEBUG (DevController:124) DevController: writing {'domain': 'os11t', 'frontend': '/local/domain/1/device/vfb/0', 'xauthority': '/root/.Xauthority', 'vnclisten': '127.0.0.1', 'vncdisplay': '99', 'state': '1', 'online': '1', 'frontend-id': '1', 'type': 'vnc', 'display': 'localhost:10.0', 'uuid': '5d22e2e9-bd13-7490-69de-c197cbeb1b25'} to /local/domain/0/backend/vfb/1/0. [2009-01-12 10:09:50 4653] INFO (XendDomainInfo:1932) createDevice: vbd : {'uuid': '3aa07231-7148-5b76-e4e2-b834675ae543', 'bootable': 1, 'driver': 'paravirtualised', 'dev': 'xvda', 'uname': 'phy:/dev/guests/os11t', 'mode': 'w'} [2009-01-12 10:09:50 4653] DEBUG (DevController:122) DevController: writing {'virtual-device': '51712', 'device-type': 'disk', 'protocol': 'x86_64-abi', 'backend-id': '0', 'state': '1', 'backend': '/local/domain/0/backend/vbd/1/51712'} to /local/domain/1/device/vbd/51712. [2009-01-12 10:09:50 4653] DEBUG (DevController:124) DevController: writing {'domain': 'os11t', 'frontend': '/local/domain/1/device/vbd/51712', 'uuid': '3aa07231-7148-5b76-e4e2-b834675ae543', 'dev': 'xvda', 'state': '1', 'params': '/dev/guests/os11t', 'mode': 'w', 'online': '1', 'frontend-id': '1', 'type': 'phy'} to /local/domain/0/backend/vbd/1/51712. [2009-01-12 10:09:50 4653] INFO (XendDomainInfo:1932) createDevice: vif : {'bridge': 'brMB', 'mac': '00:16:3E:10:00:99', 'vifname': 'vifT.INT', 'uuid': 'd3ae7bf2-1a47-b9a8-d6fe-fa3066d38a69'} [2009-01-12 10:09:50 4653] DEBUG (DevController:122) DevController: writing {'mac': '00:16:3E:10:00:99', 'handle': '0', 'protocol': 'x86_64-abi', 'backend-id': '0', 'state': '1', 'backend': '/local/domain/0/backend/vif/1/0'} to /local/domain/1/device/vif/0. [2009-01-12 10:09:50 4653] DEBUG (DevController:124) DevController: writing {'bridge': 'brMB', 'domain': 'os11t', 'handle': '0', 'uuid': 'd3ae7bf2-1a47-b9a8-d6fe-fa3066d38a69', 'script': '/etc/xen/scripts/vif-bridge', 'mac': '00:16:3E:10:00:99', 'frontend-id': '1', 'state': '1', 'vifname': 'vifT.INT', 'online': '1', 'frontend': '/local/domain/1/device/vif/0'} to /local/domain/0/backend/vif/1/0. [2009-01-12 10:09:50 4653] INFO (image:375) spawning device models: /usr/lib64/xen/bin/qemu-dm ['/usr/lib64/xen/bin/qemu-dm', '-d', '1', '-domain-name', 'os11t', '-k', 'en-us', '-vnc', '127.0.0.1:99', '-vncunused', '-serial', 'pty', '-M', 'xenpv'] [2009-01-12 10:09:50 4653] INFO (image:422) device model pid: 4913 [2009-01-12 10:09:50 4653] INFO (image:521) waiting for sentinel_fifo [2009-01-12 10:09:50 4653] DEBUG (XendDomainInfo:2769) Storing VM details: {'on_xend_stop': 'ignore', 'shadow_memory': '0', 'uuid': 'b085d596-5d6b-0605-8c3d-ed74a0f2aa3c', 'on_reboot': 'restart', 'start_time': '1231783790.71', 'on_poweroff': 'destroy', 'on_xend_start': 'ignore', 'on_crash': 'restart', 'xend/restart_count': '0', 'vcpus': '1', 'vcpu_avail': '1', 'image': "(linux (kernel ) (args 'root=/dev/system/root textmode=1 xencons=xvc0') (device_model /usr/lib64/xen/bin/qemu-dm) (keymap en-us) (notes (FEATURES 'writable_page_tables|writable_descriptor_tables|auto_translated_physmap|pae_pgdir_above_4gb|supervisor_mode_kernel') (VIRT_BASE 18446744071562067968) (GUEST_VERSION 2.6) (PADDR_OFFSET 0) (GUEST_OS linux) (HYPERCALL_PAGE 18446744071564193792) (LOADER generic) (SUSPEND_CANCEL 1) (ENTRY 18446744071564165120) (XEN_VERSION xen-3.0)))", 'name': 'os11t'} [2009-01-12 10:09:50 4653] DEBUG (XendDomainInfo:1392) Storing domain details: {'console/ring-ref': '2183125', 'image/entry': '18446744071564165120', 'console/port': '2', 'store/ring-ref': '2183126', 'image/loader': 'generic', 'vm': '/vm/b085d596-5d6b-0605-8c3d-ed74a0f2aa3c', 'control/platform-feature-multiprocessor-suspend': '1', 'image/guest-os': 'linux', 'image/features/writable-descriptor-tables': '1', 'image/virt-base': '18446744071562067968', 'memory/target': '524288', 'image/guest-version': '2.6', 'image/features/supervisor-mode-kernel': '1', 'console/limit': '1048576', 'image/paddr-offset': '0', 'image/hypercall-page': '18446744071564193792', 'image/suspend-cancel': '1', 'cpu/0/availability': 'online', 'image/features/pae-pgdir-above-4gb': '1', 'image/features/writable-page-tables': '1', 'console/type': 'ioemu', 'image/features/auto-translated-physmap': '1', 'name': 'os11t', 'domid': '1', 'image/xen-version': 'xen-3.0', 'store/port': '1'} [2009-01-12 10:09:50 4653] DEBUG (DevController:122) DevController: writing {'protocol': 'x86_64-abi', 'state': '1', 'backend-id': '0', 'backend': '/local/domain/0/backend/console/1/0'} to /local/domain/1/device/console/0. [2009-01-12 10:09:50 4653] DEBUG (DevController:124) DevController: writing {'domain': 'os11t', 'frontend': '/local/domain/1/device/console/0', 'uuid': '5282c462-b833-00cf-22fc-7132cdd82d37', 'frontend-id': '1', 'state': '1', 'location': '2', 'online': '1', 'protocol': 'vt100'} to /local/domain/0/backend/console/1/0. [2009-01-12 10:09:50 4653] DEBUG (XendDomainInfo:1476) XendDomainInfo.handleShutdownWatch [2009-01-12 10:09:50 4653] DEBUG (DevController:166) Waiting for devices vif. [2009-01-12 10:09:50 4653] DEBUG (DevController:171) Waiting for 0. [2009-01-12 10:09:50 4653] DEBUG (DevController:681) hotplugStatusCallback /local/domain/0/backend/vif/1/0/hotplug-status. [2009-01-12 10:09:51 4653] DEBUG (DevController:681) hotplugStatusCallback /local/domain/0/backend/vif/1/0/hotplug-status. [2009-01-12 10:09:51 4653] DEBUG (DevController:695) hotplugStatusCallback 1. [2009-01-12 10:09:51 4653] DEBUG (DevController:166) Waiting for devices vkbd. [2009-01-12 10:09:51 4653] DEBUG (DevController:166) Waiting for devices ioports. [2009-01-12 10:09:51 4653] DEBUG (DevController:166) Waiting for devices tap. [2009-01-12 10:09:51 4653] DEBUG (DevController:166) Waiting for devices console. [2009-01-12 10:09:51 4653] DEBUG (DevController:171) Waiting for 0. [2009-01-12 10:09:51 4653] DEBUG (DevController:166) Waiting for devices vscsi. [2009-01-12 10:09:51 4653] DEBUG (DevController:166) Waiting for devices vbd. [2009-01-12 10:09:51 4653] DEBUG (DevController:171) Waiting for 51712. [2009-01-12 10:09:51 4653] DEBUG (DevController:681) hotplugStatusCallback /local/domain/0/backend/vbd/1/51712/hotplug-status. [2009-01-12 10:09:51 4653] DEBUG (DevController:695) hotplugStatusCallback 1. [2009-01-12 10:09:51 4653] DEBUG (DevController:166) Waiting for devices irq. [2009-01-12 10:09:51 4653] DEBUG (DevController:166) Waiting for devices vfb. [2009-01-12 10:09:51 4653] DEBUG (DevController:166) Waiting for devices pci. [2009-01-12 10:09:51 4653] DEBUG (DevController:166) Waiting for devices vtpm. [2009-01-12 10:09:51 4653] INFO (XendDomain:1175) Domain os11t (1) unpaused. ==> xen-hotplug.log <== Nothing to flush. ----------- -- To unsubscribe, e-mail: opensuse-virtual+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-virtual+help(a)opensuse.org

2 1