Process ID number is a number that uniquely identifies one specific process or running program (this number is valid only during the lifetime of that process).<br><br> <b>Severity Level:</b> Select the lowest severity level for security events that you would like to be included in the report. The selected severity level, and above, will be included in the reports.<br><br> <b>Detail:</b> A source to which the profile has denied access. This includes capabilities and files. You can use this field to report the resources are not allowed to be accessed by profiles.<br><br> <b>Mode:</b> The Mode is the permission that the profile grants to the program or process to which it is applied. The options are: r (read) w (write) l (link) x (execute)<br><br> <b>Access Type:</b> The access type describes what is actually happening with the security event. The options are: PERMITTING, REJECTING, or AUDITING.<br><br> <b>CSV or HTML:</b> Enables you to export a CSV (comma separated values) or ht ml file. The CSV file separates pieces of data in the log entries with commas using a standard data format for importing into table-oriented applications. You can enter a pathname for your exported report by typing in the full pathname in the field provided.</p>" +#~ msgstr " રીપોર્ટ કન્ફીગ્યુરેશન ડાયલોગની સહાયતાથી તમે પાછળની સ્ક્રીનમાં પસંદ કરેલ આર્કાઈવ્ડ કરેલ અહેવાલને ફિલ્ટર કરી શકશો. <b> તારીખ મર્યાદાઃ </b><br><br><0> દ્વારા ફિલ્ટર કરવા <li><b> તારીખ મર્યાદા દ્વારા ફિલ્ટર કરો </b> ક્લીક કરો. ફિલ્ડ્સ સક્રિય થશે. <li>શરૂઆતની અને અંતિમ તારીખ એન્ટર કરો કે જે અહેવાલ ની શક્યતાનું વર્ણન કરશે. <li>અન્ય ફિલ્ટરીંગ પારમિતિઓ દાખલ કરો. પારમિતિઓàની વ્યાખ્યા મા� ��ે નીચે જૂઓ.<ol> રીપોર્ટ કન્ફીગ્યુરેશન ડાયલોગ: માં ફિલ્ટરીંગ પારમિતિઓ à દાખલ કરવા માટે નીચેની વ્યાખ્યાઓ તમને મદદરૂપ થશે. <br><br> <b> પ્રોગ્રામ નામ પેટર્ન:</b> જ્યારે તમે પ્રોગ્રામ નામ યાપેટર્ન દાખલ કરશો કે જે પ્રોગ્રામના બાઇનરી એક્ઝીક્યુટેબલ નામથી સમાન હશે ત્યારે અહેવાલ ચોક્કસ પ્રોગ્રામ માટે થયેલ સુરક્ષા ઘટાનાઓ દર્શાવશે. <br><br> <b> પ્રોફાઇલ નામ પેટર્ન:</b> જ્યારે તમે પ્રોફાઇલ નામ દાખલ કરશો, અહેવાલ ચોક્કસ પ્રોફાઇલ માટે થયેલ સુરક્ષા ઘટનાઓ દર્શાવશે. તમે આ સુવિધાનો ઉપયોગ એક ચોક્કસ પ્રોફાઇલ દ્વારા શું થયેલ છે તે તપાસવા માટે કરી શકશો. ><br> <b>પીઆઇડી નંબર:</b> આઇડી નંબર એ એક નંબર છે જે એક ચોક્કસ પ્રોસેસ યા રનીંગ પ્રોગ્રામને અદ્વિતીય રીતે ઓળખે છે. (તે પ્રોસેસના જીવનપર્યંત ફક્ત આ નંબર માન્ય રહેશે.). <br><br> <b>ગંભીરતા સ્તર:</b> તમારે અહેવાલ માં સુરક્ષા ઘટનાઓ માટે જે સ્તરનો સમાવેશ ક� ��વાનો છે તેના માટે નિમ્ન ગંભીરતા સ્તર પસંદ કરો. પસંદ કરેલ ગંભીરતા સ્તર, અને ઉપરોક્તનો અહેવાલ માં સમાવેશ થશે. <br><br> <b>વિગત :</b> એક મૂળ કે જેના માટે પ્રોફાઇલે કાર્ય માટે ઇન્કાર કરેલ છે. અહીં કાર્યક્ષમતાઓ અને ફાઇલ્સનો સમાવેશ.આ ફિલ્ડનો ઉપયોગ તમે પ્રોફાઇલ દ્વારા અમાન્ય મૂળ માટે અહેવાલ તૈયાર કરવા માટે કરી શકશો. <br><br> <b> ઢબ :</b> ઢબ એ માન્યતા છે કે જેને પ્રોફાઇલ જે તે યા પ્રોસેસ માટે લાગુ � ��ે તેને પ્રમાણિત કરે છે. વિકલ્પો આ મુજબ છે: આર(લાંટો) ડબલ્યુ (લખો ) એલ (લિંક í) એક્સ (એક્ઝીક્યુટ) <br><br> <b> પહોંચનો પ્રકાર :</b> સુરક્ષા ઘટનાઓ સાથે ખરેખર શું થયું છે તે પહોંચનો પ્રકાર દર્શાવે છે.વિકલ્પો આ મુજબ છે: મંજૂરી, નકારો અથવા ઓડિટીંગ <br><br> <b>CSV અથવા HTML:</b> જેનાથી CSV (અલ્પવિરામ વિભાજીત મૂલ્ય) અથવા HTML ફાઇલ તમે એક્સપોર્ટ કરી શકશો. ટેબલ –કેન્દ્રીત અનુપ્રયોગ માં ઇમ્પોર્ટ કરવા માટે ધોરણસરનો ડ� ��ટા ફોર્મેટનો ઉપયોગ કરી લોગ એન્ટ્રીઝમાં ડેટાનાં ટુકડાઓને CSV ફાઇલ અલ્પવિરામથી વિભાજીત કરે છે. રજૂ કરવામાં આવેલ ફિલ્ડમાં ફુલ પાથનેમ ટાઇપ કરી તમારા એક્સપોર્ટ કરાયેલ અહેવાલ માટે તમે પાથનેમ દાખલ કરી શકશો."
Author: keichwa
Date: 2015-10-01 16:24:30 +0200 (Thu, 01 Oct 2015)
New Revision: 93078
Added:
branches/SLE12-SP1/yast/gu/
branches/SLE12-SP1/yast/gu/COPYING
branches/SLE12-SP1/yast/gu/MAINTAINER
branches/SLE12-SP1/yast/gu/Makefile.am
branches/SLE12-SP1/yast/gu/Makefile.cvs
branches/SLE12-SP1/yast/gu/README
branches/SLE12-SP1/yast/gu/RPMNAME
branches/SLE12-SP1/yast/gu/SUBDIRS
branches/SLE12-SP1/yast/gu/VERSION
branches/SLE12-SP1/yast/gu/configure.ac
branches/SLE12-SP1/yast/gu/configure.in.in
branches/SLE12-SP1/yast/gu/package/
branches/SLE12-SP1/yast/gu/package/yast2-trans-gu.changes
branches/SLE12-SP1/yast/gu/po/
branches/SLE12-SP1/yast/gu/po/Makefile.am
branches/SLE12-SP1/yast/gu/po/add-on-creator.gu.po
branches/SLE12-SP1/yast/gu/po/add-on.gu.po
branches/SLE12-SP1/yast/gu/po/audit-laf.gu.po
branches/SLE12-SP1/yast/gu/po/auth-client.gu.po
branches/SLE12-SP1/yast/gu/po/auth-server.gu.po
branches/SLE12-SP1/yast/gu/po/autoinst.gu.po
branches/SLE12-SP1/yast/gu/po/base.gu.po
branches/SLE12-SP1/yast/gu/po/bootloader.gu.po
branches/SLE12-SP1/yast/gu/po/ca-management.gu.po
branches/SLE12-SP1/yast/gu/po/cio.gu.po
branches/SLE12-SP1/yast/gu/po/cluster.gu.po
branches/SLE12-SP1/yast/gu/po/control-center.gu.po
branches/SLE12-SP1/yast/gu/po/control.gu.po
branches/SLE12-SP1/yast/gu/po/country.gu.po
branches/SLE12-SP1/yast/gu/po/crowbar.gu.po
branches/SLE12-SP1/yast/gu/po/dhcp-server.gu.po
branches/SLE12-SP1/yast/gu/po/dns-server.gu.po
branches/SLE12-SP1/yast/gu/po/docker.gu.po
branches/SLE12-SP1/yast/gu/po/drbd.gu.po
branches/SLE12-SP1/yast/gu/po/fcoe-client.gu.po
branches/SLE12-SP1/yast/gu/po/firewall-services.gu.po
branches/SLE12-SP1/yast/gu/po/firewall.gu.po
branches/SLE12-SP1/yast/gu/po/firstboot.gu.po
branches/SLE12-SP1/yast/gu/po/fonts.gu.po
branches/SLE12-SP1/yast/gu/po/ftp-server.gu.po
branches/SLE12-SP1/yast/gu/po/geo-cluster.gu.po
branches/SLE12-SP1/yast/gu/po/gtk.gu.po
branches/SLE12-SP1/yast/gu/po/http-server.gu.po
branches/SLE12-SP1/yast/gu/po/inetd.gu.po
branches/SLE12-SP1/yast/gu/po/installation.gu.po
branches/SLE12-SP1/yast/gu/po/instserver.gu.po
branches/SLE12-SP1/yast/gu/po/iplb.gu.po
branches/SLE12-SP1/yast/gu/po/iscsi-client.gu.po
branches/SLE12-SP1/yast/gu/po/iscsi-lio-server.gu.po
branches/SLE12-SP1/yast/gu/po/isns.gu.po
branches/SLE12-SP1/yast/gu/po/journal.gu.po
branches/SLE12-SP1/yast/gu/po/kdump.gu.po
branches/SLE12-SP1/yast/gu/po/languages_db.gu.po
branches/SLE12-SP1/yast/gu/po/ldap-client.gu.po
branches/SLE12-SP1/yast/gu/po/ldap.gu.po
branches/SLE12-SP1/yast/gu/po/live-installer.gu.po
branches/SLE12-SP1/yast/gu/po/mail.gu.po
branches/SLE12-SP1/yast/gu/po/multipath.gu.po
branches/SLE12-SP1/yast/gu/po/ncurses-pkg.gu.po
branches/SLE12-SP1/yast/gu/po/ncurses.gu.po
branches/SLE12-SP1/yast/gu/po/network.gu.po
branches/SLE12-SP1/yast/gu/po/nfs.gu.po
branches/SLE12-SP1/yast/gu/po/nfs_server.gu.po
branches/SLE12-SP1/yast/gu/po/nis.gu.po
branches/SLE12-SP1/yast/gu/po/nis_server.gu.po
branches/SLE12-SP1/yast/gu/po/ntp-client.gu.po
branches/SLE12-SP1/yast/gu/po/oneclickinstall.gu.po
branches/SLE12-SP1/yast/gu/po/online-update-configuration.gu.po
branches/SLE12-SP1/yast/gu/po/online-update.gu.po
branches/SLE12-SP1/yast/gu/po/opensuse_mirror.gu.po
branches/SLE12-SP1/yast/gu/po/packager.gu.po
branches/SLE12-SP1/yast/gu/po/pam.gu.po
branches/SLE12-SP1/yast/gu/po/pkg-bindings.gu.po
branches/SLE12-SP1/yast/gu/po/printer.gu.po
branches/SLE12-SP1/yast/gu/po/product-creator.gu.po
branches/SLE12-SP1/yast/gu/po/proxy.gu.po
branches/SLE12-SP1/yast/gu/po/qt-pkg.gu.po
branches/SLE12-SP1/yast/gu/po/qt.gu.po
branches/SLE12-SP1/yast/gu/po/rdp.gu.po
branches/SLE12-SP1/yast/gu/po/rear.gu.po
branches/SLE12-SP1/yast/gu/po/registration.gu.po
branches/SLE12-SP1/yast/gu/po/reipl.gu.po
branches/SLE12-SP1/yast/gu/po/relocation-server.gu.po
branches/SLE12-SP1/yast/gu/po/rpm-groups.gu.po
branches/SLE12-SP1/yast/gu/po/samba-client.gu.po
branches/SLE12-SP1/yast/gu/po/samba-server.gu.po
branches/SLE12-SP1/yast/gu/po/samba-users.gu.po
branches/SLE12-SP1/yast/gu/po/scanner.gu.po
branches/SLE12-SP1/yast/gu/po/security.gu.po
branches/SLE12-SP1/yast/gu/po/services-manager.gu.po
branches/SLE12-SP1/yast/gu/po/slp-server.gu.po
branches/SLE12-SP1/yast/gu/po/snapper.gu.po
branches/SLE12-SP1/yast/gu/po/sound.gu.po
branches/SLE12-SP1/yast/gu/po/squid.gu.po
branches/SLE12-SP1/yast/gu/po/sshd.gu.po
branches/SLE12-SP1/yast/gu/po/storage.gu.po
branches/SLE12-SP1/yast/gu/po/sudo.gu.po
branches/SLE12-SP1/yast/gu/po/support.gu.po
branches/SLE12-SP1/yast/gu/po/sysconfig.gu.po
branches/SLE12-SP1/yast/gu/po/tftp-server.gu.po
branches/SLE12-SP1/yast/gu/po/timezone_db.gu.po
branches/SLE12-SP1/yast/gu/po/tune.gu.po
branches/SLE12-SP1/yast/gu/po/update.gu.po
branches/SLE12-SP1/yast/gu/po/users.gu.po
branches/SLE12-SP1/yast/gu/po/vm.gu.po
branches/SLE12-SP1/yast/gu/po/vpn.gu.po
branches/SLE12-SP1/yast/gu/po/wol.gu.po
branches/SLE12-SP1/yast/gu/po/yast2-apparmor.gu.po
branches/SLE12-SP1/yast/gu/yast2-trans-gu.spec.in
Log:
from Factory
Added: branches/SLE12-SP1/yast/gu/COPYING
===================================================================
--- branches/SLE12-SP1/yast/gu/COPYING (rev 0)
+++ branches/SLE12-SP1/yast/gu/COPYING 2015-10-01 14:24:30 UTC (rev 93078)
@@ -0,0 +1,339 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Lesser General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ >"
+#~ msgstr "&વિગતો >>"
+
+#~ msgid "Unknown Error Code"
+#~ msgstr "અજાણી ભૂલનો કોડ."
+
+#~ msgid ""
+#~ "An error occurred during the %1 proxy test.\n"
+#~ "Proxy return code: %2.\n"
+#~ msgstr ""
+#~ "%1 પ્રોક્સી ટેસ્ટ દરમ્યાન ભૂલ ઉદ્ભવી.\n"
+#~ "પ્રોક્સી રીટર્ન કોડ: %2.\n"
+
+#~ msgid ""
+#~ "An unknown error occurred during the %1 proxy test.\n"
+#~ "Proxy return code: %2.\n"
+#~ msgstr ""
+#~ "%1 પ્રોક્સી ટેસ્ટ દરમ્યાન અજાણી ભૂલ ઉદ્ભવી.\n"
+#~ "પ્રોક્સી રીટર્ન કોડ: %2.\n"
+
+#~ msgid "Testing the current proxy settings..."
+#~ msgstr "હાલની પ્રોક્સી ગોઠવણોનું પરીક્ષણ કરી રહયું છે..."
+
+#~ msgid "An error occurred during the HTTP proxy test."
+#~ msgstr "HTTP પ્રોક્સી પરીક્ષણ દરમ્યાન ભૂલ ઉદ્ભવી."
+
+#~ msgid "An error occurred during the HTTPS proxy test."
+#~ msgstr "HTTP પ્રોક્સી પરીક્ષણ દરમ્યાન ભૂલ ઉદ્ભવી."
+
+#~ msgid "An error occurred during the FTP proxy test."
+#~ msgstr "FTP પ્રોક્સી પરીક્ષણ દરમ્યાન ભૂલ ઉદ્ભવી."
+
+#~ msgid "Proxy settings work correctly."
+#~ msgstr "પ્રોક્સી ગોઠવણો સાચી રીતે કાર્ય કરે છે."
+
+#~ msgid ""
+#~ "<p><b>HTTP Proxy URL</b> is the name of the proxy server for your access\n"
+#~ "to the World Wide Web (WWW).</p>\n"
+#~ msgstr ""
+#~ "<p><b>HTTP પ્રોક્સી URL</b> પ્રોક્સી સર્વરનું નામ છે આપના એકસેસ\n"
+#~ "વર્લ્ડ વાઇડ વેબ માટે (WWW).</p>\n"
+
+#~ msgid ""
+#~ "<p><b>HTTPS Proxy URL</b> is the name of the proxy server for your secured access\n"
+#~ "to the World Wide Web (WWW).</p>\n"
+#~ msgstr ""
+#~ "<p><b>HTTP પ્રોક્સી URL</b> પ્રોક્સી સર્વરનું નામ છે આપના સુરક્ષિત રીતે\n"
+#~ "વર્લ્ડ વાઇડ વેબ માટે (WWW).</p>\n"
+
+#~ msgid "<p>Example: <i>http://proxy.example.com:3128/</i></p>"
+#~ msgstr "<p>ઉદાહરણ તરીકે: <i>http://proxy.example.com:3128/</i></p>"
+
+#~ msgid ""
+#~ "<p><b>FTP Proxy URL</b> is the name of the proxy server for your access\n"
+#~ "to the file transfer services (FTP).</p>"
+#~ msgstr ""
+#~ "<p><b>FTP પ્રોક્સી URL</b>આપની ફાઇલ ટ્રાન્સફર સેવા માટેના એકસેસનું \n"
+#~ "(FTP) પ્રોક્સી સર્વરનું નામ છે.</p>"
+
+#, fuzzy
+#~ msgid ""
+#~ "<p>If you check <b>Use the Same Proxy for All Protocols</b>, it is\n"
+#~ "enough to fill in the HTTP proxy URL. It will be used for all protocols\n"
+#~ "(HTTP, HTTPS and FTP).\n"
+#~ msgstr ""
+#~ "<p><b> બધા પ્રોટોકોલ માટે સમાન પ્રોક્સિનો ઉપયોગ કરો </b> સાથે વિક્લ્પ ચેક કરો,\n"
+#~ " તે HTTP પ્રોક્સિ URL માં ભરવા પૂરતુ છે, જે પછી બધાprotocols\n"
+#~ " પ્રોટોકોલ્સ (HTTP, HTTPS અને FTP) માટે વપરાશે"
+
+#~ msgid ""
+#~ "<p><b>No Proxy Domains</b> is a comma-separated list of domains\n"
+#~ "for which the requests should be made directly without caching,\n"
+#~ "for example, <i>%1</i>.</p>\n"
+#~ msgstr ""
+#~ "<p><b>કોઇ પ્રોક્સી ડોમેન્સ</b> ડોમેન્સના અલ્પવિરામથી અલગ કરાયેલ\n"
+#~ "સૂચિ છે જેને માટે વિનંતી કેચીંગ સિવાય સીધી થવી જોઇએ,\n"
+#~ "ઉદાહરણ તરીકે, <i>%1</i>.</p>\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "<p>If you are using a proxy server with authorization, enter\n"
+#~ "the <b>Proxy User Name</b> and <b>Proxy Password</b>. A valid username\n"
+#~ "consists of printable ASCII characters only (except for quotation marks).</p>\n"
+#~ msgstr ""
+#~ "<p>જો આપ ઓથોરાઇઝેશન દ્વારા પ્રોક્સી સર્વરનો ઉપયોગ કરી રહયાં હોવ તો\n"
+#~ "<b>પ્રોક્સી યુઝર નેમ</b> અને <b>પ્રોક્સી પાસવર્ડ</b> દાખલ કરો.</p>\n"
+
+#~ msgid ""
+#~ "<p>Press <b>Test Proxy Settings</b> to test\n"
+#~ "the current configuration for HTTP, HTTPS, and FTP proxy.</p> \n"
+#~ msgstr ""
+#~ "<p> <b>ટેસ્ટ પ્રોક્સી સેટીંગ્સ</b> દબાવો હાલના \n"
+#~ "HTTP, HTTPS, અને FTP પ્રોક્સીનો કોન્ફીગરનું પરીક્ષણ કરવા.</p>\n"
+
+#~ msgid "&Enable Proxy"
+#~ msgstr "&એનેબલ પ્રોક્સી"
+
+#~ msgid "Proxy Settings"
+#~ msgstr "પ્રોક્સી સેટીંગ્સ"
+
+#~ msgid "&HTTP Proxy URL"
+#~ msgstr "&HTTP પ્રોક્સી URL"
+
+#~ msgid "HTTP&S Proxy URL"
+#~ msgstr "HTTP&S પ્રોક્સી URL"
+
+#~ msgid "F&TP Proxy URL"
+#~ msgstr "F&TP પ્રોક્સી URL"
+
+#~ msgid "Us&e the Same Proxy for All Protocols"
+#~ msgstr " બ&ધા પ્રોટોકોલ માટે સમાન પ્રોક્સિનો ઉપયોગ કરો"
+
+#~ msgid "No Proxy &Domains"
+#~ msgstr "નો પ્રોક્સી &ડોમેન્સ"
+
+#~ msgid "Proxy Authentication"
+#~ msgstr "& ઓથેન્ટીકેશન મોડ"
+
+#~ msgid "Proxy &User Name"
+#~ msgstr "પ્રોક્સી &યુઝર નેમ"
+
+#~ msgid "Proxy &Password"
+#~ msgstr "પ્રોક્સી &પાસવર્ડ"
+
+#~ msgid "Test Pr&oxy Settings"
+#~ msgstr "ટેસ્ટ પ્રો&ક્સી સેટીંગ્સ"
+
+#~ msgid ""
+#~ "Proxy is enabled, but no proxy URL has been specified.\n"
+#~ "Really use these settings?"
+#~ msgstr ""
+#~ " પ્રોક્સિ સક્ષમ છે, પરંતુ કોઇ પ્રોક્સિ URL નિર્દિષ્ટ કર્યું નથી.\n"
+#~ " ખરેખર આ સેટિંગ્સ વાપરવું છે?"
+
+#~ msgid "You cannot enter a password and leave the user name empty."
+#~ msgstr "આપ પાસવર્ડ દાખલ ન કરી શકો અને યુઝર નેમને ખાલી રહેવા દો."
+
+#~ msgid "HTTP proxy URL is invalid."
+#~ msgstr "HTTP પ્રોક્સી URL ઇનવેલીડ છે."
+
+#~ msgid "HTTP proxy URL must contain a scheme specification (http)."
+#~ msgstr "HTTP પ્રોક્સી URL યોજવા નિર્દેશન (http) ધરાવતું હોવું જ જોઇએ."
+
+#~ msgid "The HTTPS proxy URL is invalid."
+#~ msgstr "HTTPS પ્રોક્સી URL ઇનવેલીડ છે."
+
+#~ msgid "The HTTPS proxy URL must contain a scheme specification (http)."
+#~ msgstr "HTTPS પ્રોક્સી URL યોજના ધરાવતું હોવું જ જોઇએ (http)."
+
+#~ msgid "FTP proxy URL is invalid."
+#~ msgstr "FTP પ્રોક્સી URL ઇનવેલીડ છે."
+
+#~ msgid "FTP proxy URL must contain a scheme specification (http)."
+#~ msgstr "FTP પ્રોક્સી URL યોજના ધરાવતું હોવું જ જોઇએ (http)."
+
+#~ msgid "No IP Address (for Bonding Devices)"
+#~ msgstr "કોઈ IP સરનામું નહીં (બોન્ડ ઉપકરણો માટે)"
+
+#~ msgid "Providers to Configure"
+#~ msgstr "કોન્ફીગર કરવા પ્રદાનકર્તાઓ"
+
+#, fuzzy
+#~ msgid ""
+#~ "<p>If <b>Automatically Reconnect</b> is enabled, the connection will\n"
+#~ "be reestablished automatically after failure.</p>\n"
+#~ msgstr ""
+#~ "<p>જ્યારે <b>મોડીફાય DNS</b> એનેબલ થાયેલ હોય ત્યારે, <i>નેમ સર્વર</i> જ્યારે \n"
+#~ "ઈન્ટરનેટ સાથે જોડાયેલ હોય તો આપોઆપ પરિવર્તન થઇ જશે.</p>"
+
+#, fuzzy
+#~ msgid "Automatically &Reconnect"
+#~ msgstr "ઓટોમેટીકલી"
+
+#~ msgid "&Netmask"
+#~ msgstr "&નેટમાસ્ક"
+
+#, fuzzy
+#~ msgid "<p>Enable <b>IP Forwarding</b> if the system is a router. This will apply on both IPv4 and IPv6.</p>"
+#~ msgstr "<p> જો સિસ્ટમ રાઉટર હોય તો <b>IP ફોરવર્ડીંગ /b> ને એનેબલ કરો.</p>"
+
+#, fuzzy
+#~ msgid ""
+#~ "<p>Your hostname will be written to <tt>/etc/hosts</tt> and will be \n"
+#~ "resolvable as <tt>127.0.0.2</tt> IP address. To disable this modification, \n"
+#~ "uncheck <b>Write Hostname to /etc/hosts</b> box. In that case your \n"
+#~ "hostname will not be resolvable without an active network.\n"
+#~ "</p> \n"
+#~ msgstr ""
+#~ "<p> આઇપી સરનામું મેળવવા તમે DHCP નો ઉપયોગ કરતા હોવ તો, તમારું હોસ્ટનામ /etc/hosts માં\n"
+#~ " લખાશે અને 127.0.0.2 આઇપી સરનામાં તરીકે રિઝોલ્વ થશે. \n"
+#~ " આ પ્રાથમિક વર્તણૂ ક છે. જો તમે આ અક્ષમ કરવા માંગો તો,આ બોક્સમાંથી ચેક કાઢી નાખો \n"
+#~ "પરંતુ તમારું હોસ્ટનામ સક્રિય નેટવર્ક વગર રિઝોલ્વ થશે નહીં.\n"
+#~ "</p>\n"
+
+#~ msgid "&Write Hostname to /etc/hosts"
+#~ msgstr "&હોસ્ટનેમ ટુ સેન્ડ"
+
+#~ msgid ""
+#~ "<p><b>Request Broadcast Response</b> causes the DHCP client\n"
+#~ "to ask the server always to broadcast its responses. You may need this,\n"
+#~ "for example, if your machine is a mobile client moving between different\n"
+#~ "networks.</p>"
+#~ msgstr ""
+#~ "<p><b>રીક્વોસ્ટ બ્રોડકાસ્ટ રીસ્પોન્સ</b> DHCP ક્લાયન્ટને સર્વરને હંમેશા\n"
+#~ "તે પૂછવાનું કારણ બને છે કે તેની પ્રતિક્રિયાઓ પ્રસારિત કરે. આપણે આની આવશ્યકતાપડી શકે,\n"
+#~ "ઉદાહરણ તરીકે, આપનું મશીન વિભિન્ન નેટવર્કોની વચ્ચે ફેરતું મોબાઇલ \n"
+#~ "ક્લાયન્ટ છે તો.</p>"
+
+#~ msgid "Request Broad&cast Response"
+#~ msgstr "રીક્વેસ્ટ બ્રોડ&કાસ્ટ રિસ્પોન્સ"
+
+#~ msgid "WPA-PSK"
+#~ msgstr "WPA-PSK"
+
+#~ msgid "IP address %1 is already present."
+#~ msgstr "IP એડ્રેસ %1 અગાઉથી ઉપસ્થિત છે."
+
+#~ msgid ""
+#~ "NetworkManager is enabled. Some features, such as\n"
+#~ "multiple providers for one modem, will not work.\n"
+#~ "You may want to use kinternet instead."
+#~ msgstr ""
+#~ "નેટવર્ક મેનેજર એનેબલડ છે. કેટલાંક નિરૂપણો જેવાંક\n"
+#~ "એક મોડેમ માટે મલ્ટીપલ પ્રદાનકર્તા કામ નહીં કરે.\n"
+#~ "આપ તેને બદલે કીન્ટરનેટનો ઉપયોગ કરવા માગો."
+
+#~ msgid "Run KInternet"
+#~ msgstr "Kઇન્ટરનેટ ચલાવો"
+
+#~ msgid "Running KInternet..."
+#~ msgstr "Kઇન્ટરનેટ ચાલી રહયું છે..."
+
+#~ msgid "<p>Do you want to install it now?</p>"
+#~ msgstr "<p>શું તમારે તેને હમણાં ઈન્સ્ટોલ કરવું છે?</p>"
+
+#~ msgid "Propose a configuration"
+#~ msgstr "કોન્ફીગરેશન પ્રસ્તાવ મૂકો"
+
+#~ msgid "Routing Configuration Summary:"
+#~ msgstr "રાઉટીંગ કોન્ફીગરેશન સમરીઃ"
+
+#~ msgid ""
+#~ "<p>If you plan to use a dial-up Internet connection and have set up your\n"
+#~ "connection to use dynamic DNS assignment, these values will be temporarily\n"
+#~ "disabled during the connection.</p>"
+#~ msgstr ""
+#~ "<p>જો આપ ડાયલ-અપ ઈન્ટરનેટ જોડાણ માટે યોજના બનાવો અને આપનું જોડાણ \n"
+#~ "ડાયનામિક DNS ફાળવણીનો ઉપયોગ કરવા પોતાનું જોડાણ ગોઠવાયેલ હોય તો, આ મૂલ્યો જોડાણ \n"
+#~ "દરમ્યાન હંગામીરીતે અસમર્થ કરાયેલ હશે.</p>"
+
+#~ msgid "<p>Optionally enter the name server list and domain search list.</p>"
+#~ msgstr "<p>વૈકલ્પિકરીતે નેમ સર્વર લીસ્ટ દાખલ કરો અને ડોમેન સર્ચ લીસ્ટ.</p>"
+
+#~ msgid ""
+#~ "<p>Note that the hostname is global--it applies to all\n"
+#~ "interfaces, not just this one.</p>"
+#~ msgstr ""
+#~ "<p>નોંધ કરો કે હોસ્ટનેમ ભૂંમડળીય છે--તે બંધાં જ \n"
+#~ "ઈન્ટરફેસને લાગુ પડે છે, માત્ર આને જ નહીં.</p>"
+
+#~ msgid ""
+#~ "<p>The resolver configuration file (/etc/resolv.conf)\n"
+#~ "has been temporarily modified by %1. You have two options:</p>"
+#~ msgstr ""
+#~ "<p>રીસોલ્વર કોન્ફીગરેશન કઇ (/etc/resolv.conf)\n"
+#~ "હંગામી રીતે %1 દ્વારા મોડીફાય કરાઈ છે. આપની પાસે બે વિકલ્પો છે:</p>"
+
+#, fuzzy
+#~ msgid ""
+#~ "<p>Modify the current version of the file.</p>\n"
+#~ "<p>Press <b>Accept</b> and continue editing other data. You are able to return to this dialog at a later time, \n"
+#~ "when the above service has terminated.</p>\n"
+#~ msgstr ""
+#~ "<ol>\n"
+#~ "<li>ફાઇલનું હાલનું (પરિવર્તન) વર્ઝન મોડીફાય કરે છે.</li>\n"
+#~ "<li>'એકસેપ્ટ' નાવ દબાવો અને અન્ય ડાટા (નોનો રીસોલ્વર)ને એડિટ કરવાનું ચાલુ રાખો. \n"
+#~ "આપ આ ડાયલોગ પર પાછળથી પરત ફરી શકો જ્યારે ઉપરોક્ત સેવા રદ્દ કરી દેવાય.</li>\n"
+#~ "</ol>\n"
+
+#~ msgid "Name Servers: Set by DHCP"
+#~ msgstr "નેમ સર્વર્સઃ DHCP દ્વારા સેટ"
+
+#~ msgid "Search List: Set by DHCP"
+#~ msgstr "સર્ચ લીસ્ટઃ DHCP દ્વારા સેટ"
+
+#~ msgid "<p>Enter the name for this computer and the DNS domain that it belongs to.</p>"
+#~ msgstr "<p>આ કોમ્પ્યુટર માટે નામ દાખલ કરો અને DNS ડોમેન જેને તે સંબંધિત છે.</p>"
+
+#~ msgid "<p>The domain is especially important if this computer is a mail server.</p>"
+#~ msgstr "<p>જો આપ કોમ્પ્યુટર મેલ સર્વર છે તો ડોમેન ખાલી કરીને મહત્વપૂર્ણ છે.</p>"
+
+#, fuzzy
+#~ msgid "&Change /etc/resolv.conf manually"
+#~ msgstr "/etc/ipsec.conf વાંચો "
+
+#, fuzzy
+#~ msgid "&Update DNS data via DHCP"
+#~ msgstr "&અપડેટ નેમ સર્વર્સ અને સર્ચ લિસ્ટ વાયા DHCP"
+
+#~ msgid "Device type"
+#~ msgstr "&ડિવાઇસ ટાઇપ"
+
+#, fuzzy
+#~ msgid "Impossible value for type!"
+#~ msgstr "આ પ્રકાર માટે મૂલ્ય શક્ય નથી!"
+
+#~ msgid "Device Type"
+#~ msgstr "&ડિવાઇસ ટાઇપ"
+
+#~ msgid "Bootproto"
+#~ msgstr "બુટપ્રોટો"
+
+#~ msgid "Mask"
+#~ msgstr "માસ્ટર"
+
+#, fuzzy
+#~ msgid ""
+#~ "<p>Press <b>Manually</b> tocontrol the interface manually\n"
+#~ "via ifup or KInternet (See <b>User Controlled</b> below).\n"
+#~ msgstr ""
+#~ "<b>મેન્યુઅલી</b>: આપ ઈન્ટરફેસને મેન્યુઅલી નિયંત્રિત કરો છો \n"
+#~ "વાયા 'ifup' અથવા 'kinternet' (નીચે 'ઉપયોગકર્તા નિયંત્રિત' જુઓ)"
+
+#~ msgid "No Zone, All Traffic Blocked"
+#~ msgstr "નો ઝોન, ઑલ ટ્રાફિક બ્લોક્ડ"
+
+#, fuzzy
+#~ msgid "<p>Because Device Control for Non-root User has been enabled, the <b>%1</b> packages must be installed.</p>"
+#~ msgstr "<p>મોડેમ કન્ફિગ્યુઅર કરવા માટે, <b>%1</b> પેકેજીસ ઈન્સ્ટોલ કરેલા હોવા જ જોઈએ.</p>"
+
+#~ msgid "Modem &IP Address"
+#~ msgstr "મોડેમ &IP સરનામુ"
+
+#~ msgid "Modem IP address is invalid."
+#~ msgstr "મોડેમ IP સરનામુ ઈનવેલીડ છે."
+
+#, fuzzy
+#~ msgid "Bond &Driver Options"
+#~ msgstr "બોન્ડ ડ્રાયવર ના વિકલ્પો"
+
+#, fuzzy
+#~ msgid "Configure"
+#~ msgstr "&કન્ફિગર..."
+
+#~ msgid ""
+#~ "<p>Get a list of available network cards by pressing\n"
+#~ "<b>Select from List</b>.</p>"
+#~ msgstr ""
+#~ "<p>ઉપલબ્ધ નેટવર્ક કાર્ડમાં સૂચી મેળવા શકાશે <b>સિલેક્ટ ફ્રોમ લીસ્ટ</b>\n"
+#~ "દબાવો.</p>"
+
+#, fuzzy
+#~ msgid "Matching rule"
+#~ msgstr "પાછા વાળવાના મેળના નિયમ:"
+
+#, fuzzy
+#~ msgid ""
+#~ "<p><b><big>Configuring or Deleting:</big></b><br>\n"
+#~ "Choose a network card to change or remove.\n"
+#~ "Then press <b>Configure</b> or <b>Delete</b> as desired.</p>\n"
+#~ msgstr ""
+#~ "<p><b><big>એડિટીંગ અથવા ડીલીટીંગ:</big></b><br>\n"
+#~ "પરિવર્તન અથવા રદ્દ કરવા માટે નેટવર્ક કાર્ડ ચૂંટો.\n"
+#~ " ત્યાર બાદ <b>એડિટ</b> અથવા <b>ડીલીટ</b> ઇચ્છાનુસાર દબાવો.</p>\n"
+
+#, fuzzy
+#~ msgid "Runing SuSEconfig..."
+#~ msgstr "SuSEconfig ચલાવી રહયું છે..."
+
+#~ msgid "Reading /etc/modprobe.conf..."
+#~ msgstr "etc/modprobe.conf વાંચી રહયું છે..."
+
+#~ msgid "ARCnet Network Card"
+#~ msgstr "ARCnet નેટવર્ક કાર્ડ"
+
+#~ msgid "Asynchronous Transfer Mode (ATM)"
+#~ msgstr "Asynchronous ટ્રાન્સફર મોડ (ATM)"
+
+#~ msgid "Bluetooth Connection"
+#~ msgstr "બ્લૂચુથ કનેક્શન"
+
+#~ msgid "Common Link Access for Workstation (CLAW)"
+#~ msgstr "કોમન લીંક એકસેસ ફોર વર્કસ્ટેશન (CLAW"
+
+#~ msgid "Channel to Channel Interface (CTC)"
+#~ msgstr "ચેનલ ટુ ચેનલ ઈન્ટરફેસ (CTC)"
+
+#~ msgid "Dummy Network Device"
+#~ msgstr "ડમી નેટવર્ક ડિવાઇસ"
+
+#~ msgid "Enterprise System Connector (ESCON)"
+#~ msgstr "એન્ટરપ્રાઇઝ સિસ્ટમ કનેક્ટર (ESCON)"
+
+#~ msgid "Ethernet Network Card"
+#~ msgstr "ઈથરનેટ નેટવર્ક કાર્ડ"
+
+#~ msgid "FDDI Network Card"
+#~ msgstr "FDDI નેટવર્ક કાર્ડ"
+
+#~ msgid "Fiberchannel System Connector (FICON)"
+#~ msgstr "ફાઇબરચેનલ સિસ્ટમ કનેક્ટર (FICON)"
+
+#~ msgid "HIgh Performance Parallel Interface (HIPPI)"
+#~ msgstr "હાઇ પરફોરમાન્સ પેરેલલ ઈન્ટરફેસ (HIPPI)"
+
+#~ msgid "Hipersockets Interface (HSI)"
+#~ msgstr "હાઇપરસોકેટ્સ ઈન્ટરફેસ (HSI)"
+
+#~ msgid "ISDN Connection"
+#~ msgstr "ISDN કનેક્શન"
+
+#~ msgid "Infrared Network Device"
+#~ msgstr "ઈન્ફ્રેરેડ નેટવર્ક ડિવાઇસ"
+
+#~ msgid "Infrared Device"
+#~ msgstr "ઈન્ફ્રેરેડ ડિવાઇસ"
+
+#~ msgid "OSA LCS Network Card"
+#~ msgstr "OSA LCS નેટવર્ક કાર્ડ"
+
+#~ msgid "Loopback Device"
+#~ msgstr "લૂપબેક ડિવાઇસ"
+
+#~ msgid "Myrinet Network Card"
+#~ msgstr "માયરીનેટ નેટવર્ક કાર્ડ"
+
+#~ msgid "Parallel Line Connection"
+#~ msgstr "પેરેલલ લાઇન કનેક્શન"
+
+#~ msgid "OSA-Express or QDIO Device (QETH)"
+#~ msgstr "OSA-એક્સપ્રેસ અથવા QDIO ડિવાઇસ (QETH)"
+
+#~ msgid "IPv6-in-IPv4 Encapsulation Device"
+#~ msgstr "IPv6-in-IPv4 એનકેપ્સુલેશન ડિવાઇસ"
+
+#~ msgid "Serial Line Connection"
+#~ msgstr "સીરીયલ લાઇન કનેક્શન"
+
+#~ msgid "Token Ring Network Card"
+#~ msgstr "ટોકન રીંગ નેટવર્ક કાર્ડ"
+
+#~ msgid "VMWare Network Device"
+#~ msgstr "VMWare નેટવર્ક ડિવાઇસ"
+
+#~ msgid "Wireless Network Card"
+#~ msgstr "વાયરલેસ નેટવર્ક કાર્ડ"
+
+#~ msgid "XP Network"
+#~ msgstr "XP નેટવર્ક"
+
+#~ msgid "Bond Network"
+#~ msgstr "XP નેટવર્ક"
+
+#~ msgid "ARCnet"
+#~ msgstr "ARCnet"
+
+#~ msgid "ATM"
+#~ msgstr "ATM"
+
+#~ msgid "Bluetooth"
+#~ msgstr "બ્લુટુથ"
+
+#, fuzzy
+#~ msgid "Bond"
+#~ msgstr "પોલેન્ડ"
+
+#~ msgid "CLAW"
+#~ msgstr "CLAW"
+
+#~ msgid "ISDN"
+#~ msgstr "ISDN"
+
+#~ msgid "CTC"
+#~ msgstr "CTC"
+
+#~ msgid "DSL"
+#~ msgstr "DSL"
+
+#~ msgid "Dummy"
+#~ msgstr "ડમી"
+
+#~ msgid "ESCON"
+#~ msgstr "ESCON"
+
+#~ msgid "Ethernet"
+#~ msgstr "ઈથરનેટ"
+
+#~ msgid "FDDI"
+#~ msgstr "FDDI"
+
+#~ msgid "FICON"
+#~ msgstr "FICON"
+
+#~ msgid "HIPPI"
+#~ msgstr "HIPPI"
+
+#~ msgid "Hipersockets"
+#~ msgstr "હાઇપરસોકેટ્સ"
+
+#~ msgid "IrDA"
+#~ msgstr "IrDA"
+
+#~ msgid "IUCV"
+#~ msgstr "IUCV"
+
+#~ msgid "OSA LCS"
+#~ msgstr "OSA LCS"
+
+#~ msgid "Loopback"
+#~ msgstr "લૂપબેક"
+
+#~ msgid "Myrinet"
+#~ msgstr "માયરીનેટ"
+
+#~ msgid "Parallel Line"
+#~ msgstr "પેરાલલ લાઇન"
+
+#~ msgid "QETH"
+#~ msgstr "QETH"
+
+#~ msgid "IPv6-in-IPv4"
+#~ msgstr "IPv6-ઇન-IPv4"
+
+#~ msgid "Serial Line"
+#~ msgstr "સીરીયલ લાઇન"
+
+#~ msgid "Token Ring"
+#~ msgstr "ટોકન રીંગ"
+
+#~ msgid "USB"
+#~ msgstr "USB"
+
+#~ msgid "VMWare"
+#~ msgstr "VMWare"
+
+#~ msgid "Wireless"
+#~ msgstr "વાયરલેસ"
+
+#~ msgid "XPNET"
+#~ msgstr "XPNET"
+
+#~ msgid "De&vice (optional)"
+#~ msgstr "ડિ&વાઇસ (વૈકલ્પિક)"
+
+#~ msgid "E&xpert Configuration"
+#~ msgstr "એ&ક્સપર્ટ કોન્ફીગરેશન"
+
+#~ msgid ""
+#~ "The device does not have a driver module.\n"
+#~ "The driver may be built in the kernel."
+#~ msgstr ""
+#~ "ડિવાઇસને ડ્રાઇવર મોડ્યુલ નથી.\n"
+#~ "ડ્રાઇવર કેરનેલમાં બાંધી શકાય."
+
+#~ msgid "Couldn't add interface"
+#~ msgstr "ઈન્ટરફેસ ઉમેરી શકાયો નહીં."
+
+#~ msgid "Changing Configuration for"
+#~ msgstr "રાઉટીંગ કોન્ફીગરેશન"
+
+#~ msgid ""
+#~ "<p>Here, set up your networking device.\n"
+#~ "The values are written to <i>/etc/sysconfig/hardware/hwcfg-*</i>.</p>\n"
+#~ msgstr ""
+#~ "<p>અહીં, આપના નેટવર્કીંગ ડિવાઇસને ગોઠવો.\n"
+#~ "મૂલ્યો ને લખાય છે <i>/etc/sysconfig/hardware/hwcfg-*</i>.</p>\n"
+
+#~ msgid "&Hardware Configuration Name"
+#~ msgstr "&હાર્ડવેર કોન્ફીગરેશન નેમ"
+
+#~ msgid "Hardware Name"
+#~ msgstr "હાર્ડવેર નેમ"
+
+#~ msgid "Select from &List"
+#~ msgstr "&લીસ્ટમાંથી સિલેક્ટ કરો"
+
+#~ msgid ""
+#~ "Hardware configuration %1 already exists.\n"
+#~ "Choose a different one."
+#~ msgstr ""
+#~ "હાર્ડવેર કોન્ફીગરેશન %1 અગાઉથી અસ્તિત્વ છે.\n"
+#~ "ચૂઝ એ ડિફેરેન્સ વન."
+
+#~ msgid "Open"
+#~ msgstr "ઓપન"
+
+#, fuzzy
+#~ msgid "%1 - %2 (%3)"
+#~ msgstr "%1 %2 એટ %3"
Added: branches/SLE12-SP1/yast/gu/po/nfs.gu.po
===================================================================
--- branches/SLE12-SP1/yast/gu/po/nfs.gu.po (rev 0)
+++ branches/SLE12-SP1/yast/gu/po/nfs.gu.po 2015-10-01 14:24:30 UTC (rev 93078)
@@ -0,0 +1,510 @@
+msgid ""
+msgstr ""
+"Project-Id-Version: YaST (@memory@)\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2015-08-25 18:37+0200\n"
+"PO-Revision-Date: 2003-08-14 10:47+0200\n"
+"Last-Translator: Sainath Rapaka Rendering Details Tab</h2>"
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1075
+msgid "<p>This tab controls <b>how</b> fonts are rendered. It allows you to amend font rendering algorithms to be used and change their options.</p>"
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1078
+msgid "<h3>Antialiasing</h3>"
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1079
+msgid "<p>By default, all outline fonts are smoothed by method called <i>antialiasing.</i>"
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1081
+msgid " Black and white rendering can be forced for all fonts or for monospaced only.</p>"
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1083 src/lib/fonts/fonts-dialog.rb:1097
+#: src/lib/fonts/fonts-dialog.rb:1118
+#, fuzzy
+#| msgid "<p>Home Page: %1</p>"
+msgid "<p>See: %s<p>"
+msgstr "<p>હોમ પેજ: %1</p>"
+
+#: src/lib/fonts/fonts-dialog.rb:1087
+#, fuzzy
+#| msgid "<h1>Warning</h1>"
+msgid "<h3>Hinting</h3>"
+msgstr "<h1>ચેતવણી</h1>"
+
+#: src/lib/fonts/fonts-dialog.rb:1088
+msgid "<p>Hinting instructions helps rasterizer to fit glyphs stems to the grid.</p>"
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1090
+msgid "<p>In the default setting, FreeType's autohinter can be used depending on font type and quality of own instructions. Use of autohinter can be forced by <b>Force Autohinting On</b> option.</p>"
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1094
+msgid "<p>For each hinting algorithm, hint style (hinting level) is chosen."
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1095
+msgid " It is possible to set hint style globally by <b>Force Hint Style</b> option.</p>"
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1101
+msgid "<h3>Embedded Bitmaps</h3>"
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1102
+msgid "<p>Some outline fonts contain so called bitmap strikes, i. e. bitmap version of given font for certain sizes. In this section it can be turned off entirely, on only for fonts which cover specified languages, or on for every font."
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1109
+msgid "<h3>Subpixel Rendering</h3>"
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1110
+msgid "<p>Subpixel rendering multiples resolution in one direction by using colour primaries (subpixels) of an LCD display.</p>"
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1112
+msgid "<p>Choose LCD filter, which should be used, and subpixel layout corresponding to display and its rotation.</p>"
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1114
+msgid "<p>Note, that due to patent reasons, FreeType has subpixel rendering turned off by default."
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1116
+msgid " Without FreeType's subpixel rendering support compiled in, setting in this section has no effect.</p>"
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1122
+msgid "<h2>Prefered Families Tab</h2>"
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1123
+msgid "<p>This tab controls <b>which</b> fonts are rendered.</p>"
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1124
+#, fuzzy
+#| msgid "<h3>Users</h3>"
+msgid "<h3>Preference Lists</h3>"
+msgstr "<h3>ઉપોયગકર્તાઓ</h3>"
+
+#: src/lib/fonts/fonts-dialog.rb:1125
+msgid "<p>Here, Family Preference Lists (FPL) for generic aliases (%s) can be defined."
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1127
+msgid " These are sorted lists of family names, with most prefered family first."
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1129
+msgid " There is default (system-wide) FPL yet defined for each generic alias."
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1130
+msgid " FPLs defined in this dialog will be prepended to them.</p>"
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1131
+msgid "<p>System will look for the first <b>installed</b> family in the list, other query elements taking into account of course. Available font packages for SUSE distributions can be browsed and installed from <b>fontinfo.opensuse.org.</b></p>"
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1138
+msgid "<h3>Forcing Family Preferences</h3>"
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1139
+msgid "<p>In some circumstances, FPLs defined in this dialog are not taken into account. Following two options strenghten their role.</p>"
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1142
+msgid "<h4>Search Metric Compatible</h4>"
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1143
+msgid "<p>Two fonts are metric compatible, when all corresponding letters are of the same size. That implies, document displayed using these fonts has the same same size too, same line wraps etc.</p>"
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1146
+msgid "<p>Via default setting, system substitutes metric compatible fonts preferably, and FPLs defined in this dialog can be circumvented by this rule.</p>"
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1148
+msgid "<p>Where metric compatibility does not matter, this option can be unchecked.</p>"
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1149
+msgid "<h4>Never use other fonts</h4>"
+msgstr ""
+
+#: src/lib/fonts/fonts-dialog.rb:1150
+msgid "<p>When checked, this option introduces very strong position for here defined preference lists. It pushes families from there before document or GUI requests, if they cover required charset.</p>"
+msgstr ""
+
+#. delete families, that are part of list for some alias
+#: src/lib/fonts/fpl-add-dialog.rb:57
+msgid "&Filter"
+msgstr "&ફિલ્ટર÷ :"
+
+#: src/lib/fonts/fpl-add-dialog.rb:61
+#, fuzzy
+#| msgid "Installed Patches"
+msgid "Installed Families"
+msgstr "સ્થાપિત પેચ"
+
+#: src/lib/fonts/fpl-add-dialog.rb:62
+#, fuzzy
+#| msgid "File Format"
+msgid "Font Format"
+msgstr " ફાઈલ ફોરમેટ "
+
+#: src/lib/fonts/fpl-add-dialog.rb:63
+#, fuzzy
+#| msgid "Script Name"
+msgid "Script Coverages"
+msgstr "સ્ક્રિપ્ટ નેમ"
+
+#: src/lib/fonts/fpl-add-dialog.rb:65 src/lib/fonts/select-ebl-dialog.rb:242
+msgid "&Cancel"
+msgstr "રદ કરો (&C)"
+
+#: src/lib/fonts/rich-text-dialog.rb:24 src/lib/fonts/select-ebl-dialog.rb:243
+msgid "&Ok"
+msgstr "&ઓકે"
+
+#. save unknown langs
+#: src/lib/fonts/select-ebl-dialog.rb:240
+#, fuzzy
+#| msgid "Languages"
+msgid "&Languages"
+msgstr "ભાષાઓ"
Added: branches/SLE12-SP1/yast/gu/po/ftp-server.gu.po
===================================================================
--- branches/SLE12-SP1/yast/gu/po/ftp-server.gu.po (rev 0)
+++ branches/SLE12-SP1/yast/gu/po/ftp-server.gu.po 2015-10-01 14:24:30 UTC (rev 93078)
@@ -0,0 +1,2182 @@
+# Marathi message file for YaST2 (@memory@).
+# Copyright (C) 2007 SUSE Linux Products GmbH.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: YaST (@memory@)\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2015-08-25 18:36+0200\n"
+"PO-Revision-Date: 2005-07-29 15:37+0530\n"
+"Last-Translator: i18n@suse.de\n"
+"Language-Team: Gujarati
\n"
+"<dt>* Virtual server port is 21: ftp\n"
+"</dt><dt>* Virtual server port is 25: smtp\n"
+"</dt><dt>* Virtual server port is 53: dns\n"
+"</dt><dt>* Virtual server port is 80: http\n"
+"</dt><dt>* Virtual server port is 110: pop\n"
+"</dt><dt>* Virtual server port is 119: nntp\n"
+"</dt><dt>* Virtual server port is 143: imap\n"
+"</dt><dt>* Virtual server port is 389: ldap\n"
+"</dt><dt>* Virtual server port is 443: https\n"
+"</dt><dt>* Virtual server port is 993: imaps\n"
+"</dt><dt>* Virtual server port is 995: pops\n"
+"</dt><dt>* Virtual server port is 1521: oracle\n"
+"</dt><dt>* Virtual server port is 1812: radius\n"
+"</dt><dt>* Virtual server port is 3306: mysql\n"
+"</dt><dt>* Virtual server port is 5432: pgsql\n"
+"</dt><dt>* Virtual server port is 5060: sip\n"
+"</dt><dt>* Otherwise: none\n"
+"\n"
+"\n"
+"</dt><dt><b><big>check command</big> = \"</b><i>path to script</i><b>\"</b>\n"
+"<p>This setting is used if checktype is external and is the command to be run to check the status of a real server. It should exit with status 0 if everything\n"
+"is ok, or non-zero otherwise.\n"
+"</p><p>Four parameters are passed to the script:\n"
+"</p></dt><dt>* virtual server ip/firewall mark\n"
+"</dt><dt>* virtual server port\n"
+"</dt><dt>* real server ip\n"
+"</dt><dt>* real server port\n"
+"</dt><dt>Default: /bin/true\n"
+"\n"
+"\n"
+"<p><b><big>check port</big> =</b> <i>n</i>\n"
+"</p><p>Number of port to monitor. Sometimes check port differs from service port.\n"
+"</p><p>Default: port specified for each real server\n"
+"\n"
+"\n"
+"</p><p><b><big>request</big> = \"</b><i>uri to requested object</i><b>\"</b>\n"
+"</p><p>This object will be requested each checkinterval seconds on each real server. The string must be inside quotes. Note that this string may be overridden by\n"
+"an optional per real-server based request-string.\n"
+"</p><p>For a <small>DNS</small> check this should the name of an A record, or the address of a <small>PTR</small> record to look up.\n"
+"</p><p>For a MySQL, Oracle or PostgeSQL check, this should be an <small>SQL</small> query. The data returned is not checked, only that the answer is one or more\n"
+"rows. This is a required setting.\n"
+"</p><p>For a simpletcp check, this string is sent verbatim except any occurances of \n"
+" are replaced with a new line character.\n"
+"\n"
+"\n"
+"</p><p><b><big>receive</big> = \"</b><i>regexp to compare</i><b>\"</b>\n"
+"</p><p>If the requested result contains this <i>regexp to compare</i>, the real server is declared alive. The regexp must be inside quotes. Keep in mind that\n"
+"regexps are not plain strings and that you need to escape the special characters if they should as literals. Note that this regexp may be overridden by an\n"
+"optional per real-server based receive regexp.\n"
+"</p><p>For a <small>DNS</small> check this should be any one the A record's addresses or any one of the <small>PTR</small> record's names.\n"
+"</p><p>For a MySQL check, the receive setting is not used.\n"
+"\n"
+"\n"
+"</p><p><b><big>http method</big> = <small>GET</small></b> | <b><small>HEAD</small></b>\n"
+"</p><p>Sets the <small>HTTP</small> method which should be used to fetch the <small>URI</small> specified in the request-string. <small>GET</small> is the\n"
+"method used by default if the parameter is not set. If <small>HEAD</small> is used, the receive-string should be unset.\n"
+"</p><p>Default: <small>GET</small>\n"
+"\n"
+"\n"
+"</p><p><b><big>virtual host</big> = \"</b><i>hostname</i><b>\"</b>\n"
+"</p><p>Used when using a negotiate check with <small>HTTP</small> or <small>HTTPS</small> . Sets the host header used in the <small>HTTP</small> request. In the\n"
+"case of <small>HTTPS</small> this generally needs to match the common name of the <small>SSL</small> certificate. If not set then the host header will be\n"
+"derived from the request url for the real server if present. As a last resort the <small>IP</small> address of the real server will be used.\n"
+"\n"
+"\n"
+"</p><p><b><big>login</big> = \"</b><i>username</i><b>\"</b>\n"
+"</p><p>For <small>FTP</small> , <small>IMAP</small> , <small>LDAP</small> , MySQL, Oracle, <small>POP</small> and PostgreSQL, the username used to log in.\n"
+"</p><p>For Radius the passwd is used for the attribute User-Name.\n"
+"</p><p>For <small>SIP</small> , the username is used as both the to and from address for an <small>OPTIONS</small> query.\n"
+"</p><p>Default:\n"
+"</p></dt><dt>* <small>FTP:</small> Anonymous\n"
+"</dt><dt>* MySQL Oracle, and PostgreSQL: Must be specified in the configuration\n"
+"</dt><dt>* <small>SIP:</small> ldirectord@<hostname>, hostname is derived as per the passwd option below.\n"
+"</dt><dt>* Otherwise: empty string, which denotes that case authentication will not be attempted.\n"
+"\n"
+"\n"
+"</dt><dt><b><big>password</big> = \"</b><i>password</i><b>\"</b>\n"
+"<p>Password to use to login to <small>FTP</small> , <small>IMAP</small> , <small>LDAP</small> , MySQL, Oracle, <small>POP</small> , PostgreSQL and\n"
+"<small>SIP</small> servers.\n"
+"</p><p>For Radius the passwd is used for the attribute User-Password.\n"
+"</p><p>Default:\n"
+"</p></dt><dt>* <small>FTP:</small> ldirectord@<hostname>, where hostname is the environment variable <small>HOSTNAME</small> evaluated at run time, or sourced\n"
+"from uname if unset.\n"
+"</dt><dt>* Otherwise: empty string. In the case of <small>LDAP</small> , MySQL, Oracle, and PostgreSQL this means that authentication will not be performed.\n"
+"\n"
+"\n"
+"</dt><dt><b><big>database name</big> = \"</b><i>databasename</i><b>\"</b>\n"
+"<p>Database to use for MySQL, Oracle and PostgreSQL servers, this is the database that the query (set by <b>receive</b> above) will be performed against. This\n"
+"is a required setting.\n"
+"\n"
+"\n"
+"</p><p><b><big>radius secret</big> = \"</b><i>radiussecret</i><b>\"</b>\n"
+"</p><p>Secret to use for Radius servers, this is the secret used to perform an Access-Request with the username (set by <b>login</b> above) and passwd (set by\n"
+"<b>passwd</b> above).\n"
+"</p><p>Default: empty string\n"
+"\n"
+"\n"
+"</p><p><b><big>persistent</big> =</b> <i>n</i>\n"
+"</p><p>Number of seconds for persistent client connections.\n"
+"\n"
+"\n"
+"</p><p><b><big>netmask</big> =</b> <i>w.x.y.z</i>\n"
+"</p><p>Netmask to be used for granularity of persistent client connections.\n"
+"\n"
+"\n"
+"</p><p><b><big>scheduler</big> =</b> <i>scheduler_name</i>\n"
+"</p><p>Scheduler to be used by <small>LVS</small> for loadbalancing. For an information on the available sehedulers please see the <b>ipvsadm</a></b>(8) man page.\n"
+"</p><p>Default: \"wrr\"\n"
+"\n"
+"\n"
+"</p><p><b><big>protocol</big> = tcp</b>|<b>udp</b>|<b>fwm</b>\n"
+"</p><p>Protocol to be used. If the virtual is specified as an <small>IP</small> address and port then it must be one of tcp or udp. If a firewall mark then the\n"
+"protocol must be fwm.\n"
+"</p><p>Default:\n"
+"</p></dt><dt>* Virtual is an <small>IP</small> address and port, and the port is not 53: tcp\n"
+"</dt><dt>* Virtual is an <small>IP</small> address and port, and the port is 53: udp\n"
+"</dt><dt>* Virtual is a firewall mark: fwm\n"
+"</dt></dl>\n"
+"\n"
+"\n"
+"</p><p><b><big>check timeout</big> =</b> <i>n</i>\n"
+"</p><p>Timeout in seconds for connect, external and ping checks. If the timeout is exceeded then the real server is declared dead.\n"
+"</p><p>If defined in a virtual server section then the global value is overridden.\n"
+"</p><p>If undefined then the value of negotiatetimeout is used. negotiatetimeout is also a global value that may be overriden by a per-virtual setting.\n"
+"</p><p>If both checktimeout and negotiatetimeout are unset, the default is used.\n"
+"</p><p>Default: 5 seconds\n"
+"\n"
+"</p><p><b><big>negotiate timeout</big> =</b> <i>n</i>\n"
+"</p><p>Timeout in seconds for negotiate checks.\n"
+"</p><p>If defined in a virtual server section then the global value is overridden.\n"
+"</p><p>If undefined then the value of connecttimeout is used. connecttimeout is also a global value that may be overriden by a per-virtual setting.\n"
+"</p><p>If both negotiatetimeout and connecttimeout are unset, the default is used.\n"
+"</p><p>Default: 30 seconds\n"
+"\n"
+"</p><p><b><big>failure count</big> =</b> <i>n</i>\n"
+"</p><p>The number of consecutive times a failure will have to be reported by a check before the realserver is considered to have failed. A value of 1 will have the realserver considered failed on the first failure. A successful check will reset the failure counter to 0.\n"
+"</p><p>If defined in a virtual server section then the global value is overridden.\n"
+"</p><p>Default: 1\n"
+"\n"
+"</p><p><b><big>email alert</big> = \"</b><i>emailaddress</i><b>\"</b>\n"
+"</p><p>A valid email address for sending alerts about the changed connection status to any real server defined in the virtual service. This option requires perl\n"
+"module MailTools to be installed. Automatically tries to send email using any of the built-in methods. See perldoc Mail::Mailer for more info on methods.\n"
+"</p><p>If defined in a virtual server section then the global value is overridden.\n"
+"\n"
+"</p><p><b><big>email alert freq</big> =</b> <i>n</i>\n"
+"</p><p>Delay in seconds between repeating email alerts while any given real server in the virtual service remains inaccessible. A setting of zero seconds will\n"
+"inhibit the repeating alerts. The email timing accuracy of this setting is dependent on the number of seconds defined in the checkinterval configuration\n"
+"option.\n"
+"</p><p>If defined in a virtual server section then the global value is overridden.\n"
+"</p><p>Default: 0\n"
+"\n"
+"</p><p><b><big>email alert status</big> = all</b>|<b>none</b>|<b>starting</b>|<b>running</b>|<b>stopping</b>|<b>reloading</b>,...\n"
+"</p><p>Comma delimited list of server states in which email alerts should be sent. <b>all</b> is a short-hand for\n"
+"\"<b>starting</b>,<b>running</b>,<b>stopping</b>,<b>reloading</b>\". If <b>none</b> is specified, no other option may be specified, otherwise options are ORed\n"
+"with each other.\n"
+"</p><p>If defined in a virtual server section then the global value is overridden.\n"
+"</p><p>Default: all\n"
+"\n"
+"</p><p><b><big>fallback</big> =</b> <i>ip_address|hostname[:portnumber|sercvicename]</i> [<b>gate</b>|<b>masq</b>|<b>ipip</b>]\n"
+"</p><p>the server onto which a webservice is redirected if all real servers are down. Typically this would be 127.0.0.1 with an emergency page.\n"
+"</p><p>If defined in a virtual server section then the global value is overridden.\n"
+"\n"
+"</p><p><b><big>quiescent</big> = yes</b>|<b>no</b>\n"
+"</p><p>If <i>yes</i>, then when real or failback servers are determined to be down, they are not actually removed from the kernel's <small>LVS</small> table.\n"
+"Rather, their weight is set to zero which means that no new connections will be accepted.\n"
+"</p><p>This has the side effect, that if the real server has persistent connections, new connections from any existing clients will continue to be routed to the\n"
+"real server, until the persistant timeout can expire. See ipvsadm for more information on persistant connections.\n"
+"</p><p>This side-effect can be avoided by running the following:\n"
+"</p><p>echo 1 > /proc/sys/net/ipv4/vs/expire_quiescent_template\n"
+"</p><p>If the proc file isn't present this probably means that the kernel doesn't have lvs support, <small>LVS</small> support isn't loaded, or the kernel is too\n"
+"old to have the proc file. Running ipvsadm as root should load <small>LVS</small> into the kernel if it is possible.\n"
+"</p><p>If <i>no</i>, then the real or failback servers will be removed from the kernel's <small>LVS</small> table. The default is <i>yes</i>.\n"
+"</p><p>If defined in a virtual server section then the global value is overridden.\n"
+"</p><p>Default: <i>yes</i>\n"
+"\n"
+"\n"
+"\n"
+msgstr ""
+
+#. overwrite global value part
+#: src/include/iplb/vserver_conf.rb:146
+msgid "Check Type"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:150
+msgid "Check Port"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:151
+msgid "Service"
+msgstr "સર્વિસ"
+
+#: src/include/iplb/vserver_conf.rb:152
+msgid "Check Command"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:157
+msgid "Http Method"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:160
+msgid "Request"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:162
+msgid "Receive"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:165
+msgid "Virtual Host"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:177
+msgid "Login"
+msgstr " લોગઈન "
+
+#: src/include/iplb/vserver_conf.rb:178
+msgid "Password"
+msgstr "પાસવર્ડ"
+
+#: src/include/iplb/vserver_conf.rb:180
+msgid "Database Name"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:181
+msgid "Radius Secret"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:199
+msgid "Persistent"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:200
+msgid "Netmask"
+msgstr "નેટમાસ્ક"
+
+#: src/include/iplb/vserver_conf.rb:202
+msgid "Scheduler"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:211
+msgid "Protocol"
+msgstr "પ્રોટોકોલ"
+
+#: src/include/iplb/vserver_conf.rb:231
+msgid "Virtual Servers"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:234 src/include/iplb/vserver_conf.rb:301
+msgid "Add"
+msgstr "ઉમેરો"
+
+#: src/include/iplb/vserver_conf.rb:235 src/include/iplb/vserver_conf.rb:303
+msgid "Edit"
+msgstr "ફેરફાર કરો"
+
+#: src/include/iplb/vserver_conf.rb:236 src/include/iplb/vserver_conf.rb:302
+msgid "Delete"
+msgstr "કાઢી નાખો"
+
+#. disable the delete & edit button if vserver box is empty
+#: src/include/iplb/vserver_conf.rb:296
+msgid "Virtual Server"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:298
+msgid "Real Servers"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:310
+msgid "Check type"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:311
+msgid "Auth type"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:312
+msgid "Others"
+msgstr ""
+
+#. return `cacel or a string
+#: src/include/iplb/vserver_conf.rb:342 src/include/iplb/vserver_conf.rb:427
+msgid "OK"
+msgstr "ઓકે"
+
+#: src/include/iplb/vserver_conf.rb:343 src/include/iplb/vserver_conf.rb:428
+msgid "Cancel"
+msgstr "રદ કરો"
+
+#. split the real server ip value;
+#: src/include/iplb/vserver_conf.rb:411
+msgid ""
+"If using IPv6,the format should like this\n"
+"[fe80::5054:ff:fe00:2]"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:413
+msgid "Real Server's IP Address"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:419
+msgid "Forward Method"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:422
+msgid "weight"
+msgstr ""
+
+#. find next ]
+#: src/include/iplb/vserver_conf.rb:456
+#, fuzzy
+#| msgid "The IP address is invalid."
+msgid "IP address is not Valid"
+msgstr "IP સરનામા ઇનવેલીડ છે."
+
+#. tab switch events end
+#: src/include/iplb/vserver_conf.rb:547
+#, fuzzy
+#| msgid "Add a new share"
+msgid "Add a new real server:"
+msgstr "એક નવુ શેયર ઉમેરો"
+
+#: src/include/iplb/vserver_conf.rb:564
+#, fuzzy
+#| msgid "Set the role of the server"
+msgid "Edit the real server:"
+msgstr "સર્વરના રોલને સેટ કરો"
+
+#. Initialization dialog contents
+#: src/include/iplb/wizards.rb:142
+msgid "Initializing..."
+msgstr "શરૂ કરી રહયું છે..."
+
+#. Read all iplb settings
+#. @return true on success
+#: src/modules/Iplb.rb:214
+msgid "Initializing IPLB Configuration"
+msgstr ""
+
+#. Names of real stages
+#: src/modules/Iplb.rb:221
+msgid "Read the global settings"
+msgstr ""
+
+#: src/modules/Iplb.rb:221
+msgid "Read the virtual host settings"
+msgstr ""
+
+#: src/modules/Iplb.rb:223
+msgid "Reading the global settings..."
+msgstr ""
+
+#: src/modules/Iplb.rb:224
+msgid "Reading the virtual host settings..."
+msgstr ""
+
+#: src/modules/Iplb.rb:225 src/modules/Iplb.rb:330
+msgid "Finished"
+msgstr "સમાપ્ત"
+
+#. Write all iplb settings
+#. @return true on success
+#: src/modules/Iplb.rb:320
+msgid "Saving IPLB Configuration"
+msgstr ""
+
+#: src/modules/Iplb.rb:326
+msgid "Write the settings"
+msgstr "ગોઠવણો લખો"
+
+#: src/modules/Iplb.rb:326
+msgid "Run SuSEconfig"
+msgstr " SuSEconfig ચાલુ કરો"
+
+#: src/modules/Iplb.rb:328
+msgid "Writing the settings..."
+msgstr "ગોઠવણો લખી રહયું છે..."
+
+#: src/modules/Iplb.rb:329
+msgid "Running SuSEconfig..."
+msgstr " SuSEconfig ચાલુ થઇ રહ્યું છે..."
+
+#. write global conf
+#. check for ipv6 address to decide whether to add "6=" or "="
+#. string key's format
+#. 192.168.6.241:89 or [2001:db8::5]:119
+#. only extract the 2001:db8::5 part from the key string
+#. to check whether it is an ipv6 address;
+#: src/modules/Iplb.rb:355 src/modules/Iplb.rb:392 src/modules/Iplb.rb:405
+msgid "Cannot write settings."
+msgstr "ગોઠવણી લખી શકતું નથી."
+
+#. TODO FIXME: your code here...
+#. Configuration summary text for autoyast
+#: src/modules/Iplb.rb:441
+msgid "Configuration summary..."
+msgstr " સારાંશ કન્ફિગ્યુરેશન..."
Added: branches/SLE12-SP1/yast/gu/po/iscsi-client.gu.po
===================================================================
--- branches/SLE12-SP1/yast/gu/po/iscsi-client.gu.po (rev 0)
+++ branches/SLE12-SP1/yast/gu/po/iscsi-client.gu.po 2015-10-01 14:24:30 UTC (rev 93078)
@@ -0,0 +1,686 @@
+msgid ""
+msgstr ""
+"Project-Id-Version: YaST (@memory@)\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2015-08-25 18:36+0200\n"
+"PO-Revision-Date: 2005-07-29 15:37+0530\n"
+"Last-Translator: Priyavert Sharma