Mailinglist Archive: opensuse-support (159 mails)

< Previous Next >
Re: [opensuse-support] wicked, bridge tap
  • From: "Knurpht @ openSUSE" <knurpht@xxxxxxxxxxxx>
  • Date: Sat, 09 Jun 2018 22:05:03 +0200
  • Message-id: <1686953.GC811Nq6EV@knurpht-hp>
Op zaterdag 9 juni 2018 21:57:09 CEST schreef Simon Becherer:
Hi,

i trie to set up a tap / bridge network to connect kvm machines
on tumbleweed. on opensuse 11.4 i have done something like:

enp37s0 is set up to static address 192.168.0.21
(from system start)
then as root:

tunctl -u myuser
brctl addbr bri0)
brctl stp bri0 off

ifconfig tap0 0.0.0.0 up

brctl addif bri0 tap0

ifconfig enp37s0 0.0.0.0 up
brctl addif bri0 enp37s0

ifconfig bri0 192.168.0.21 up

ip link set tap0 up

then my virtual machine was running fine in the net:
qemu-kvm -enable-kvm -hda /home/kvm/images/suse10p1.img -no-reboot -usb
-usbdevice tablet -localtime -net nic,macaddr=52-54-00-12-35-57,model=e1000
-net tap,ifname=tap0,downscript=no -m 1024 -cpu host -vga cirrus -k de
-monitor stdio

=======================================

i tried in tumbleweed (and googeled, i have read man wicked man
wicked-config and man wicked-ethtool ifcfg ifcfg-vlan) now i am completely
confused:

to find how i change the ifconfig line's to wicked

trying simply:
wicked ifup tap0 0.0.0.0
wicked: skipping tap0 interface: no configuration provided
wicked: ifup: no matching interfaces

i found nothing how i got / generate a config file who will work.
on the old system there is also not an config file
for bri0 or tap0

where did i get this config files or change the above commands to run?

regards,

simoN




--

www.becherer.de
FWIW: I've setup the networking through virt-manager, and this works fine.

--
Gertjan Lettink a.k.a. Knurpht
openSUSE Board Member
openSUSE Forums Team


--
To unsubscribe, e-mail: opensuse-support+unsubscribe@xxxxxxxxxxxx
To contact the owner, e-mail: opensuse-support+owner@xxxxxxxxxxxx

< Previous Next >
Follow Ups
References