Mailinglist Archive: opensuse-security (138 mails)

< Previous Next >
encore:.. winscp& openssh
  • From: piet <prooroa@xxxxxxxxxx>
  • Date: Wed, 14 Dec 2005 17:04:19 +0100
  • Message-id: <43A04283.8090803@xxxxxxxxxx>
ok people,

server is 9.3 suse open ssh

xp-box is winscp.
I made a public & private key with PuTTY, copy-paste the public to a text file: renamed it public.pub
put it in /home/xxxx/.ssh

did:
touch authorized_keys
chmod 600 authorized_keys
cat public.pub >>authorized_keys
rm public.pub

loaded private key (private.pkk) in peagent key on de xp-box

but cannot login why????
----------------------------------------------------------------
here is my ssh file:
.............................
# $OpenBSD: ssh_config,v 1.19 2003/08/13 08:46:31 markus Exp $

# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for
# users, and the values can be changed in per-user configuration files
# or on the command line.

# Configuration data is parsed as follows:
# 1. command line options
# 2. user-specific file
# 3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.

# Site-wide defaults for various options

Host *
# ForwardAgent no
# ForwardX11 no

# If you do not trust your remote host (or its administrator), you
# should not forward X11 connections to your local X11-display for
# security reasons: Someone stealing the authentification data on the
# remote side (the "spoofed" X-server by the remote sshd) can read your
# keystrokes as you type, just like any other X11 client could do.
# Set this to "no" here for global effect or in your own ~/.ssh/config
# file if you want to have the remote X11 authentification data to
# expire after two minutes after remote login.
ForwardX11Trusted yes

# RhostsRSAAuthentication no
# DSAAuthentication yes
# RSAAuthentication yes
# PasswordAuthentication yes
# HostbasedAuthentication no
# BatchMode no
# CheckHostIP yes
# AddressFamily any
# ConnectTimeout 0
# StrictHostKeyChecking ask
# IdentityFile ~/.ssh/identity
# IdentityFile ~/.ssh/id_rsa
# IdentityFile ~/.ssh/id_dsa
# Port 22
# Protocol 2
# Cipher 3des
# Ciphers aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
# EscapeChar ~
# GSSAPIAuthentication no
# GSSAPIDelegateCredentials no

# Set this to 'yes' to enable support for the deprecated 'gssapi' authentication
# mechanism to OpenSSH 3.8p1. The newer 'gssapi-with-mic' mechanism is included
# in this release. The use of 'gssapi' is deprecated due to the presence of
# potential man-in-the-middle attacks, which 'gssapi-with-mic' is not susceptible to.
# GSSAPIEnableMITMAttack no

# This enables sending locale enviroment variables LC_* LANG, see ssh_config(5).
SendEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
SendEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
SendEnv LC_IDENTIFICATION LC_ALL

............................
............................
sshd file
.............................
# $OpenBSD: sshd_config,v 1.69 2004/05/23 23:59:53 dtucker Exp $

# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.

# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin

# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options change a
# default value.

#Port 22
#Protocol 2,1 ; is de orginele regel geinterpreteerd als het volgende:
Protocol 2
#ListenAddress 0.0.0.0
#ListenAddress ::

# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
#HostKeys for protocol version 2
HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key

# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 768

# Logging
#obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
#LogLevel INFO

# Authentication:

#LoginGraceTime 2m
PermitRootLogin no
#StrictModes yes
#MaxAuthTries 6

#volgende regel toegevoegd nav vosberg: piet
#DSAAuthentication yes
RSAAuthentication yes
#PubkeyAuthentication yes
AuthorizedKeysFile ~/.ssh/authorized_keys

# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes

# To disable tunneled clear text passwords, change to no here!
PasswordAuthentication no
PermitEmptyPasswords no

# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes

# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no

# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes

# Set this to 'yes' to enable support for the deprecated 'gssapi' #authentication
# mechanism to OpenSSH 3.8p1. The newer 'gssapi-with-mic' mechanism is #included
# in this release. The use of 'gssapi' is deprecated due to the presence #of
# potential man-in-the-middle attacks, which 'gssapi-with-mic' is not #susceptible to.
#GSSAPIEnableMITMAttack no


# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication mechanism.
# Depending on your PAM configuration, this may bypass the setting of
# PasswordAuthentication, PermitEmptyPasswords, and
# "PermitRootLogin without-password". If you just want the PAM account #and
# session checks to run without PAM authentication, then enable this but #set
# ChallengeResponseAuthentication=no
#UsePAM yes

#AllowTcpForwarding yes
#GatewayPorts no
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
#UsePrivilegeSeparation yes
#PermitUserEnvironment no
#Compression yes
#ClientAliveInterval 0
ClientAliveCountMax 3
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10

# no default banner path
#Banner /some/path

# override default of no subsystems
Subsystem sftp /usr/lib/ssh/sftp-server

# This enables accepting locale enviroment variables LC_* LANG, see sshd_config(5).
AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
AcceptEnv LC_IDENTIFICATION LC_ALL
......................................................................
regards,
piet
regards,
piet

< Previous Next >