September 2018 - openSUSE Security Announce

[security-announce] openSUSE-SU-2018:2957-1: moderate: Security update for openssl
by opensuse-security＠opensuse.org 30 Sep '18

30 Sep '18

openSUSE Security Update: Security update for openssl ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:2957-1 Rating: moderate References: #1089039 #1101246 #1101470 #1104789 #1106197 #997043 Cross-References: CVE-2018-0737 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that solves one vulnerability and has 5 fixes is now available. Description: This update for openssl fixes the following issues: These security issues were fixed: - Prevent One&Done side-channel attack on RSA that allowed physically near attackers to use EM emanations to recover information (bsc#1104789) - CVE-2018-0737: The RSA Key generation algorithm has been shown to be vulnerable to a cache timing side channel attack. An attacker with sufficient access to mount cache timing attacks during the RSA key generation process could have recovered the private key (bsc#1089039) These non-security issues were fixed: - Add openssl(cli) Provide so the packages that require the openssl binary can require this instead of the new openssl meta package (bsc#1101470) - Fixed path to the engines which are under /lib64 on SLE-12 (bsc#1101246, bsc#997043) This update was imported from the SUSE:SLE-12-SP2:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-1091=1 Package List: - openSUSE Leap 42.3 (i586 x86_64): libopenssl-devel-1.0.2j-29.1 libopenssl1_0_0-1.0.2j-29.1 libopenssl1_0_0-debuginfo-1.0.2j-29.1 libopenssl1_0_0-hmac-1.0.2j-29.1 openssl-1.0.2j-29.1 openssl-cavs-1.0.2j-29.1 openssl-cavs-debuginfo-1.0.2j-29.1 openssl-debuginfo-1.0.2j-29.1 openssl-debugsource-1.0.2j-29.1 - openSUSE Leap 42.3 (noarch): openssl-doc-1.0.2j-29.1 - openSUSE Leap 42.3 (x86_64): libopenssl-devel-32bit-1.0.2j-29.1 libopenssl1_0_0-32bit-1.0.2j-29.1 libopenssl1_0_0-debuginfo-32bit-1.0.2j-29.1 libopenssl1_0_0-hmac-32bit-1.0.2j-29.1 References: https://www.suse.com/security/cve/CVE-2018-0737.html https://bugzilla.suse.com/1089039 https://bugzilla.suse.com/1101246 https://bugzilla.suse.com/1101470 https://bugzilla.suse.com/1104789 https://bugzilla.suse.com/1106197 https://bugzilla.suse.com/997043 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2018:2943-1: important: Security update for yast2-smt
by opensuse-security＠opensuse.org 28 Sep '18

28 Sep '18

openSUSE Security Update: Security update for yast2-smt ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:2943-1 Rating: important References: #1097560 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that contains security fixes can now be installed. Description: This update fixes the following issue in yast2-smt: - Remove cron job rescheduling (bsc#1097560) This update is a requirement for the security update for SMT. Because of that it is tagged as security to ensure that all users, even those that only install security updates, install it. This update was imported from the SUSE:SLE-12-SP3:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-1081=1 Package List: - openSUSE Leap 42.3 (noarch): yast2-smt-3.0.14-2.3.1 References: https://bugzilla.suse.com/1097560 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2018:2942-1: important: Security update for mgetty
by opensuse-security＠opensuse.org 28 Sep '18

28 Sep '18

openSUSE Security Update: Security update for mgetty ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:2942-1 Rating: important References: #1108752 #1108756 #1108757 #1108761 #1108762 Cross-References: CVE-2018-16741 CVE-2018-16742 CVE-2018-16743 CVE-2018-16744 CVE-2018-16745 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that fixes 5 vulnerabilities is now available. Description: This update for mgetty fixes the following issues: - CVE-2018-16741: The function do_activate() did not properly sanitize shell metacharacters to prevent command injection (bsc#1108752). - CVE-2018-16745: The mail_to parameter was not sanitized, leading to a buffer overflow if long untrusted input reached it (bsc#1108756). - CVE-2018-16744: The mail_to parameter was not sanitized, leading to command injection if untrusted input reached reach it (bsc#1108757). - CVE-2018-16742: Prevent stack-based buffer overflow that could have been triggered via a command-line parameter (bsc#1108762). - CVE-2018-16743: The command-line parameter username wsa passed unsanitized to strcpy(), which could have caused a stack-based buffer overflow (bsc#1108761). This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-1080=1 Package List: - openSUSE Leap 15.0 (x86_64): g3utils-1.1.37-lp150.2.3.1 g3utils-debuginfo-1.1.37-lp150.2.3.1 mgetty-1.1.37-lp150.2.3.1 mgetty-debuginfo-1.1.37-lp150.2.3.1 mgetty-debugsource-1.1.37-lp150.2.3.1 sendfax-1.1.37-lp150.2.3.1 sendfax-debuginfo-1.1.37-lp150.2.3.1 References: https://www.suse.com/security/cve/CVE-2018-16741.html https://www.suse.com/security/cve/CVE-2018-16742.html https://www.suse.com/security/cve/CVE-2018-16743.html https://www.suse.com/security/cve/CVE-2018-16744.html https://www.suse.com/security/cve/CVE-2018-16745.html https://bugzilla.suse.com/1108752 https://bugzilla.suse.com/1108756 https://bugzilla.suse.com/1108757 https://bugzilla.suse.com/1108761 https://bugzilla.suse.com/1108762 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2018:2941-1: moderate: Security update for gd
by opensuse-security＠opensuse.org 28 Sep '18

28 Sep '18

openSUSE Security Update: Security update for gd ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:2941-1 Rating: moderate References: #1105434 Cross-References: CVE-2018-1000222 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for gd fixes the following issues: Security issue fixed: - CVE-2018-1000222: Fixed a double free vulnerability in gdImageBmpPtr() that could result in remote code execution. This could have been exploited via a specially crafted JPEG image files. (bsc#1105434) This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-1079=1 Package List: - openSUSE Leap 15.0 (i586 x86_64): gd-2.2.5-lp150.3.3.1 gd-debuginfo-2.2.5-lp150.3.3.1 gd-debugsource-2.2.5-lp150.3.3.1 gd-devel-2.2.5-lp150.3.3.1 libgd3-2.2.5-lp150.3.3.1 libgd3-debuginfo-2.2.5-lp150.3.3.1 - openSUSE Leap 15.0 (x86_64): libgd3-32bit-2.2.5-lp150.3.3.1 libgd3-32bit-debuginfo-2.2.5-lp150.3.3.1 References: https://www.suse.com/security/cve/CVE-2018-1000222.html https://bugzilla.suse.com/1105434 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2018:2931-1: moderate: Security update for dom4j
by opensuse-security＠opensuse.org 28 Sep '18

28 Sep '18

openSUSE Security Update: Security update for dom4j ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:2931-1 Rating: moderate References: #1105443 Cross-References: CVE-2018-1000632 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for dom4j fixes the following issues: - CVE-2018-1000632: Prevent XML injection vulnerability that allowed an attacker to tamper with XML documents (bsc#1105443) This update was imported from the SUSE:SLE-12:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-1077=1 Package List: - openSUSE Leap 42.3 (noarch): dom4j-1.6.1-31.3.2 dom4j-demo-1.6.1-31.3.2 dom4j-javadoc-1.6.1-31.3.2 dom4j-manual-1.6.1-31.3.2 References: https://www.suse.com/security/cve/CVE-2018-1000632.html https://bugzilla.suse.com/1105443 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2018:2929-1: moderate: Security update for php7
by opensuse-security＠opensuse.org 28 Sep '18

28 Sep '18

openSUSE Security Update: Security update for php7 ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:2929-1 Rating: moderate References: #1108753 Cross-References: CVE-2018-17082 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for php7 fixes the following issues: - CVE-2018-17082: The Apache2 component in PHP allowed XSS via the body of a "Transfer-Encoding: chunked" request, because the bucket brigade was mishandled in the php_handler function (bsc#1108753). This update was imported from the SUSE:SLE-12:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-1078=1 Package List: - openSUSE Leap 42.3 (i586 x86_64): apache2-mod_php7-7.0.7-49.1 apache2-mod_php7-debuginfo-7.0.7-49.1 php7-7.0.7-49.1 php7-bcmath-7.0.7-49.1 php7-bcmath-debuginfo-7.0.7-49.1 php7-bz2-7.0.7-49.1 php7-bz2-debuginfo-7.0.7-49.1 php7-calendar-7.0.7-49.1 php7-calendar-debuginfo-7.0.7-49.1 php7-ctype-7.0.7-49.1 php7-ctype-debuginfo-7.0.7-49.1 php7-curl-7.0.7-49.1 php7-curl-debuginfo-7.0.7-49.1 php7-dba-7.0.7-49.1 php7-dba-debuginfo-7.0.7-49.1 php7-debuginfo-7.0.7-49.1 php7-debugsource-7.0.7-49.1 php7-devel-7.0.7-49.1 php7-dom-7.0.7-49.1 php7-dom-debuginfo-7.0.7-49.1 php7-enchant-7.0.7-49.1 php7-enchant-debuginfo-7.0.7-49.1 php7-exif-7.0.7-49.1 php7-exif-debuginfo-7.0.7-49.1 php7-fastcgi-7.0.7-49.1 php7-fastcgi-debuginfo-7.0.7-49.1 php7-fileinfo-7.0.7-49.1 php7-fileinfo-debuginfo-7.0.7-49.1 php7-firebird-7.0.7-49.1 php7-firebird-debuginfo-7.0.7-49.1 php7-fpm-7.0.7-49.1 php7-fpm-debuginfo-7.0.7-49.1 php7-ftp-7.0.7-49.1 php7-ftp-debuginfo-7.0.7-49.1 php7-gd-7.0.7-49.1 php7-gd-debuginfo-7.0.7-49.1 php7-gettext-7.0.7-49.1 php7-gettext-debuginfo-7.0.7-49.1 php7-gmp-7.0.7-49.1 php7-gmp-debuginfo-7.0.7-49.1 php7-iconv-7.0.7-49.1 php7-iconv-debuginfo-7.0.7-49.1 php7-imap-7.0.7-49.1 php7-imap-debuginfo-7.0.7-49.1 php7-intl-7.0.7-49.1 php7-intl-debuginfo-7.0.7-49.1 php7-json-7.0.7-49.1 php7-json-debuginfo-7.0.7-49.1 php7-ldap-7.0.7-49.1 php7-ldap-debuginfo-7.0.7-49.1 php7-mbstring-7.0.7-49.1 php7-mbstring-debuginfo-7.0.7-49.1 php7-mcrypt-7.0.7-49.1 php7-mcrypt-debuginfo-7.0.7-49.1 php7-mysql-7.0.7-49.1 php7-mysql-debuginfo-7.0.7-49.1 php7-odbc-7.0.7-49.1 php7-odbc-debuginfo-7.0.7-49.1 php7-opcache-7.0.7-49.1 php7-opcache-debuginfo-7.0.7-49.1 php7-openssl-7.0.7-49.1 php7-openssl-debuginfo-7.0.7-49.1 php7-pcntl-7.0.7-49.1 php7-pcntl-debuginfo-7.0.7-49.1 php7-pdo-7.0.7-49.1 php7-pdo-debuginfo-7.0.7-49.1 php7-pgsql-7.0.7-49.1 php7-pgsql-debuginfo-7.0.7-49.1 php7-phar-7.0.7-49.1 php7-phar-debuginfo-7.0.7-49.1 php7-posix-7.0.7-49.1 php7-posix-debuginfo-7.0.7-49.1 php7-pspell-7.0.7-49.1 php7-pspell-debuginfo-7.0.7-49.1 php7-readline-7.0.7-49.1 php7-readline-debuginfo-7.0.7-49.1 php7-shmop-7.0.7-49.1 php7-shmop-debuginfo-7.0.7-49.1 php7-snmp-7.0.7-49.1 php7-snmp-debuginfo-7.0.7-49.1 php7-soap-7.0.7-49.1 php7-soap-debuginfo-7.0.7-49.1 php7-sockets-7.0.7-49.1 php7-sockets-debuginfo-7.0.7-49.1 php7-sqlite-7.0.7-49.1 php7-sqlite-debuginfo-7.0.7-49.1 php7-sysvmsg-7.0.7-49.1 php7-sysvmsg-debuginfo-7.0.7-49.1 php7-sysvsem-7.0.7-49.1 php7-sysvsem-debuginfo-7.0.7-49.1 php7-sysvshm-7.0.7-49.1 php7-sysvshm-debuginfo-7.0.7-49.1 php7-tidy-7.0.7-49.1 php7-tidy-debuginfo-7.0.7-49.1 php7-tokenizer-7.0.7-49.1 php7-tokenizer-debuginfo-7.0.7-49.1 php7-wddx-7.0.7-49.1 php7-wddx-debuginfo-7.0.7-49.1 php7-xmlreader-7.0.7-49.1 php7-xmlreader-debuginfo-7.0.7-49.1 php7-xmlrpc-7.0.7-49.1 php7-xmlrpc-debuginfo-7.0.7-49.1 php7-xmlwriter-7.0.7-49.1 php7-xmlwriter-debuginfo-7.0.7-49.1 php7-xsl-7.0.7-49.1 php7-xsl-debuginfo-7.0.7-49.1 php7-zip-7.0.7-49.1 php7-zip-debuginfo-7.0.7-49.1 php7-zlib-7.0.7-49.1 php7-zlib-debuginfo-7.0.7-49.1 - openSUSE Leap 42.3 (noarch): php7-pear-7.0.7-49.1 php7-pear-Archive_Tar-7.0.7-49.1 References: https://www.suse.com/security/cve/CVE-2018-17082.html https://bugzilla.suse.com/1108753 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2018:2895-1: moderate: Security update for ant
by opensuse-security＠opensuse.org 27 Sep '18

27 Sep '18

openSUSE Security Update: Security update for ant ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:2895-1 Rating: moderate References: #1100053 Cross-References: CVE-2018-10886 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for ant fixes the following issues: Security issue fixed: - CVE-2018-10886: Fixed a path traversal vulnerability in malformed zip file paths, which allowed arbitrary file writes and could potentially lead to code execution (bsc#1100053) This update was imported from the SUSE:SLE-15:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-1057=1 Package List: - openSUSE Leap 15.0 (noarch): ant-1.9.10-lp150.2.3.1 ant-antlr-1.9.10-lp150.2.3.1 ant-apache-bcel-1.9.10-lp150.2.3.1 ant-apache-bsf-1.9.10-lp150.2.3.1 ant-apache-log4j-1.9.10-lp150.2.3.1 ant-apache-oro-1.9.10-lp150.2.3.1 ant-apache-regexp-1.9.10-lp150.2.3.1 ant-apache-resolver-1.9.10-lp150.2.3.1 ant-apache-xalan2-1.9.10-lp150.2.3.1 ant-commons-logging-1.9.10-lp150.2.3.1 ant-commons-net-1.9.10-lp150.2.3.1 ant-javamail-1.9.10-lp150.2.3.1 ant-jdepend-1.9.10-lp150.2.3.1 ant-jmf-1.9.10-lp150.2.3.1 ant-jsch-1.9.10-lp150.2.3.1 ant-junit-1.9.10-lp150.2.3.1 ant-manual-1.9.10-lp150.2.3.1 ant-scripts-1.9.10-lp150.2.3.1 ant-swing-1.9.10-lp150.2.3.1 ant-testutil-1.9.10-lp150.2.3.1 References: https://www.suse.com/security/cve/CVE-2018-10886.html https://bugzilla.suse.com/1100053 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2018:2885-1: moderate: Security update for shadow
by opensuse-security＠opensuse.org 26 Sep '18

26 Sep '18

openSUSE Security Update: Security update for shadow ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:2885-1 Rating: moderate References: #1106914 Cross-References: CVE-2018-16588 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for shadow fixes the following security issue: - CVE-2018-16588: Prevent useradd from creating intermediate directories with mode 0777 (bsc#1106914) This update was imported from the SUSE:SLE-12-SP2:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-1055=1 Package List: - openSUSE Leap 42.3 (i586 x86_64): shadow-4.2.1-20.1 shadow-debuginfo-4.2.1-20.1 shadow-debugsource-4.2.1-20.1 References: https://www.suse.com/security/cve/CVE-2018-16588.html https://bugzilla.suse.com/1106914 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2018:2881-1: important: Security update for libzypp, zypper
by opensuse-security＠opensuse.org 26 Sep '18

26 Sep '18

openSUSE Security Update: Security update for libzypp, zypper ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:2881-1 Rating: important References: #1036304 #1049825 #1070851 #1076192 #1088705 #1091624 #1092413 #1096803 #1099847 #1100028 #1101349 #1102429 Cross-References: CVE-2018-7685 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that solves one vulnerability and has 11 fixes is now available. Description: This update for libzypp, zypper fixes the following issues: Update libzypp to version 16.17.20: Security issues fixed: - PackageProvider: Validate delta rpms before caching (bsc#1091624, bsc#1088705, CVE-2018-7685) - PackageProvider: Validate downloaded rpm package signatures before caching (bsc#1091624, bsc#1088705, CVE-2018-7685) Other bugs fixed: - lsof: use '-K i' if lsof supports it (bsc#1099847, bsc#1036304) - Handle http error 502 Bad Gateway in curl backend (bsc#1070851) - RepoManager: Explicitly request repo2solv to generate application pseudo packages. - libzypp-devel should not require cmake (bsc#1101349) - HardLocksFile: Prevent against empty commit without Target having been been loaded (bsc#1096803) - Avoid zombie tar processes (bsc#1076192) Update to zypper to version 1.13.45: Other bugs fixed: - XML <install-summary> attribute `packages-to-change` added (bsc#1102429) - man: Strengthen that `--config FILE' affects zypper.conf, not zypp.conf (bsc#1100028) - Prevent nested calls to exit() if aborted by a signal (bsc#1092413) - ansi.h: Prevent ESC sequence strings from going out of scope (bsc#1092413) - Fix: zypper bash completion expands non-existing options (bsc#1049825) This update was imported from the SUSE:SLE-12-SP3:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-1054=1 Package List: - openSUSE Leap 42.3 (i586 x86_64): libzypp-16.17.20-27.1 libzypp-debuginfo-16.17.20-27.1 libzypp-debugsource-16.17.20-27.1 libzypp-devel-16.17.20-27.1 libzypp-devel-doc-16.17.20-27.1 zypper-1.13.45-20.1 zypper-debuginfo-1.13.45-20.1 zypper-debugsource-1.13.45-20.1 - openSUSE Leap 42.3 (noarch): zypper-aptitude-1.13.45-20.1 zypper-log-1.13.45-20.1 References: https://www.suse.com/security/cve/CVE-2018-7685.html https://bugzilla.suse.com/1036304 https://bugzilla.suse.com/1049825 https://bugzilla.suse.com/1070851 https://bugzilla.suse.com/1076192 https://bugzilla.suse.com/1088705 https://bugzilla.suse.com/1091624 https://bugzilla.suse.com/1092413 https://bugzilla.suse.com/1096803 https://bugzilla.suse.com/1099847 https://bugzilla.suse.com/1100028 https://bugzilla.suse.com/1101349 https://bugzilla.suse.com/1102429 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0

[security-announce] openSUSE-SU-2018:2880-1: moderate: Security update for tiff
by opensuse-security＠opensuse.org 26 Sep '18

26 Sep '18

openSUSE Security Update: Security update for tiff ______________________________________________________________________________ Announcement ID: openSUSE-SU-2018:2880-1 Rating: moderate References: #1074186 #1092480 #983440 Cross-References: CVE-2016-5319 CVE-2017-17942 CVE-2018-10779 Affected Products: openSUSE Leap 42.3 ______________________________________________________________________________ An update that fixes three vulnerabilities is now available. Description: This update for tiff fixes the following issues: Security issues fixed: - CVE-2018-10779: Fixed a heap-based buffer overflow in TIFFWriteScanline() in tif_write.c (bsc#1092480) - CVE-2017-17942: Fixed a heap-based buffer overflow in the function PackBitsEncode in tif_packbits.c. (bsc#1074186) - CVE-2016-5319: Fixed a beap-based buffer overflow in bmp2tiff (bsc#983440) This update was imported from the SUSE:SLE-12:Update update project. Patch Instructions: To install this openSUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 42.3: zypper in -t patch openSUSE-2018-1056=1 Package List: - openSUSE Leap 42.3 (i586 x86_64): libtiff-devel-4.0.9-34.1 libtiff5-4.0.9-34.1 libtiff5-debuginfo-4.0.9-34.1 tiff-4.0.9-34.1 tiff-debuginfo-4.0.9-34.1 tiff-debugsource-4.0.9-34.1 - openSUSE Leap 42.3 (x86_64): libtiff-devel-32bit-4.0.9-34.1 libtiff5-32bit-4.0.9-34.1 libtiff5-debuginfo-32bit-4.0.9-34.1 References: https://www.suse.com/security/cve/CVE-2016-5319.html https://www.suse.com/security/cve/CVE-2017-17942.html https://www.suse.com/security/cve/CVE-2018-10779.html https://bugzilla.suse.com/1074186 https://bugzilla.suse.com/1092480 https://bugzilla.suse.com/983440 -- To unsubscribe, e-mail: opensuse-security-announce+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-security-announce+help(a)opensuse.org

1 0