June 2005 - openSUSE Programming - openSUSE Mailing Lists

Order of eth0 & eth1 in SuSE 9.3
by Zoltan Szecsei 27 Jun '05

27 Jun '05

Hi, In SuSE 9.2 the on-mother-board ethernet became eth1 *after* I plugged in a pci 3COM ethernet card (which took over the eth0 position). In 9.3 the motherboard ethernet remains eth0 even after I plug in the 2nd network card. I need to make sure that the order of sensing the Network cards is such the the PCI 3COM card is sensed *before* any other network cards. Can anyone tell me how I can achieve this? (or point me to some documentation). TIA, Zoltan

3 3

TR1 support in SuSE 9.3 GCC?
by Steven T. Hatton 27 Jun '05

27 Jun '05

Is there support for ISO/IEC PDTR 19768 in the GCC bundled with SuSE 9.3, or available from the ftp site? How might I get/use it? -- Regards, Steven

1 0

Re: [suse-programming-e] [SuSE 8.0] what should I configure to receive emails po
by robert guru 23 Jun '05

23 Jun '05

hi, the hikha(a)lpar.dori.com was just an example the real host name is node06.lrap.polymtl.ca i m sur that is registred in the DNS so what? ****************************************************** >From: Jerry Feldman <gaf(a)blu.org> >To: suse-programming-e(a)suse.com >Subject: Re: [suse-programming-e] [SuSE 8.0] what should I configure to >receive emails posted to me >Date: Thu, 23 Jun 2005 14:12:02 -0400 > >This is really not the correct forum, you should send to >suse-linux-e(a)suse.com >That said: >It has nothing to do with sendmail. >Your hostname, lpar, is not listed in a public DNS database. >This would need to be done by the DNS admins at dori.com. > > >On Thursday 23 June 2005 2:03 pm, robert guru wrote: > > Hallo, > > I m using SuSE 8.0, and i have sendmail configured so i can send emails > > using sendmail, and the received email will have the adress > > hikha(a)lpar.dori.com in the <from> field > > but when i try to send an email to this adress (hikha(a)lpar.dori.com) >from > > a gmail account (for example) it fails and it bounces and i receive the > > email telling that: > > **************************************************** > > This is an automatically generated Delivery Status Notification > > Delivery to the following recipient failed permanently: > > hikha(a)lpar.dori.com > > > > Technical details of permanent failure: > > PERM_FAILURE: DNS Error: Domain name not found > > > > ----- Original message ----- > > Received: by 10.54.53.15 with SMTP id b15mr2280311wra; > > Sun, 19 Jun 2005 21:23:13 -0700 (PDT) > > Received: by 10.54.65.15 with HTTP; Sun, 19 Jun 2005 21:23:13 -0700 >(PDT) > > Message-ID: <47ce88f505061921235e3f5991(a)mail.gmail.com> > > **************************************************** > > > > We suppose here that the domaine lpar.dori.com is already registred > > so when i tape: $> host lpar.dori.com > > lpar.dori.com has adress xxx.xxx.xxx.xxx > > $> host xxx.xxx.xxx.xxx > > xxx.xxx.xxx.xxx.IN.ADDR.ARPA domain name pointer lpar.dori.com > > > > what i have to do in order to send emails to hikha(a)lpar.dori.com and to > > retrieve them. ? must i configure a pop3 server or what ? > > > > thanks (you can reply me to: sos_linux(a)hotmail.com) > > > > _________________________________________________________________ > > Powerful Parental Controls Let your child discover the best the Internet > > has to offer. > > >http://join.msn.com/?pgmarket=en-ca&page=byoa/prem&xAPID=1994&DI=1034&SU= > >http://hotmail.com/enca&HL=Market_MSNIS_Taglines Start enjoying all the > > benefits of MSN Premium right now and get the first two months FREE*. > >-- >Jerry Feldman <gaf(a)blu.org> >Boston Linux and Unix user group >http://www.blu.org PGP key id:C5061EA9 >PGP Key fingerprint:053C 73EC 3AC1 5C44 3E14 9245 FB00 3ED5 C506 1EA9 > >-- >To unsubscribe, email: suse-programming-e-unsubscribe(a)suse.com >For additional commands, email: suse-programming-e-help(a)suse.com >Archives can be found at: http://lists.suse.com/archive/suse-programming-e > _________________________________________________________________ Take charge with a pop-up guard built on patented Microsoft® SmartScreen Technology http://join.msn.com/?pgmarket=en-ca&page=byoa/prem&xAPID=1994&DI=1034&SU=ht… Start enjoying all the benefits of MSN® Premium right now and get the first two months FREE*.

2 1

gtk.h not found error
by D'Arcy MacIsaac 23 Jun '05

23 Jun '05

Hi, I'm getting an odd error here, maybe there's a simple answer. Though the devel rpms are installed, when I'm trying to compile a gtk app, I'm getting a gtk/gtk.h: No such file or directory error. Checking my $LD_LIBRARY_PATH I notice that all I get is this: /usr/ lib/fglrx/lib:/usr/lib/fglrx/lib:/usr/X11R6/lib whereas the ld.so.conf has a lot more than that. Did the fglrx rpm screw up my ld path? Ideas how to fix? D'Arcy

2 1

[SuSE 8.0] what should I configure to receive emails posted to me
by robert guru 23 Jun '05

23 Jun '05

Hallo, I m using SuSE 8.0, and i have sendmail configured so i can send emails using sendmail, and the received email will have the adress hikha(a)lpar.dori.com in the <from> field but when i try to send an email to this adress (hikha(a)lpar.dori.com) from a gmail account (for example) it fails and it bounces and i receive the email telling that: **************************************************** This is an automatically generated Delivery Status Notification Delivery to the following recipient failed permanently: hikha(a)lpar.dori.com Technical details of permanent failure: PERM_FAILURE: DNS Error: Domain name not found ----- Original message ----- Received: by 10.54.53.15 with SMTP id b15mr2280311wra; Sun, 19 Jun 2005 21:23:13 -0700 (PDT) Received: by 10.54.65.15 with HTTP; Sun, 19 Jun 2005 21:23:13 -0700 (PDT) Message-ID: <47ce88f505061921235e3f5991(a)mail.gmail.com> **************************************************** We suppose here that the domaine lpar.dori.com is already registred so when i tape: $> host lpar.dori.com lpar.dori.com has adress xxx.xxx.xxx.xxx $> host xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx.IN.ADDR.ARPA domain name pointer lpar.dori.com what i have to do in order to send emails to hikha(a)lpar.dori.com and to retrieve them. ? must i configure a pop3 server or what ? thanks (you can reply me to: sos_linux(a)hotmail.com) _________________________________________________________________ Powerful Parental Controls Let your child discover the best the Internet has to offer. http://join.msn.com/?pgmarket=en-ca&page=byoa/prem&xAPID=1994&DI=1034&SU=ht… Start enjoying all the benefits of MSN® Premium right now and get the first two months FREE*.

2 1

PCI BAR1 register
by Pierre Patino 18 Jun '05

18 Jun '05

Greetings I'm working on a driver for a PCI card. During the installation, I read the BAR0 and BAR1 registers two different ways and I get two different results for BAR1. pci_resource_start(0) = A pci_read_config_dword(0x10) = A pci_resource_start(1) = B pci_read_config_dword(0x14) = B+8 Any ideas anyone? I've tried this on two systems, same hardware. Kernels 2.6.5-7.155 and 2.6.11.xxx. x86_64 flavo(u)rs. TIA & cheers

1 0

FYI:Proposal: Overloading operator.() & operator.*()
by Steven T. Hatton 18 Jun '05

18 Jun '05

This was recently posted to comp.std.c++, and looks interesting: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2004/n1671.pdf Overloading operator.() & operator.*() Gary Powell, Doug Gregor, Jaakko Jarvi Project: Programming Language C++, Evolution Working Group Reply-to: Gary Powell <powellg(a)amazon.com> Abstract With operator->() and operator->*() a designer of a class can create a smart pointer. There is also a need to create smart references, and smart delayed member access variable hence the need to be able to overload operator.() and operator.*(). -- Regards, Steven

2 4

Asathor doesn't like icecream
by Steven T. Hatton 15 Jun '05

15 Jun '05

I set up icecream on my network. I have one box running the scheduler. All the participating systems all have icecream for the netname. The scheduler is not the same box on which I run the make command. That box is, however one of the boxes running iceccd. The scheduler only seems to use two of the four boxes I have running iceccd. These are the two highest performing boxes, but I'm not sure that's why they are the only ones being used. It seems to favor the second best box. That is, if there's only one job, it will send it across the network to a slower box than the one where the make job was started. Why wold icecream not use some boxes, and use others? -- Regards, Steven

1 0

checkinstall
by Carlos E. R. 14 Jun '05

14 Jun '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I'm not a Linux programmer, although some time ago I made my living programming. Now and then I install things from the tgz. I know that the best way to create rpms is to create the appropiate spec file, but as I only want the rpm to keep the rpm database happy, and not to distribute them, I haven't bothered to learn how. Some day, perhaps O:-) But I'm having a problem with checkinstall: it doesn't create well the "Provides:" and "Requires:" lines, they are incorrect or empty. For example, a run with balsa: sudo /usr/sbin/checkinstall --arch=i686 \ --pkggroup=Productivity/Networking/Email/Clients \ --pkgaltsource=http://balsa.gnome.org/ ... 10 - Provides: [ ] <============== 11 - Requires: [ ] <============== ... Copyright: GPL Packager: checkinstall-1.6.0beta3 Group: Productivity/Networking/Email/Clients BuildRoot: /home/cer/compilaciones/balsa-2.3.3/buildroot Provides: balsa Requires: ,/bin/sh <============== Obviously, that gives problem when installing the rpm. I don't know if the problem only happens for me, or it is generalised. It happened with my SuSE 9.1 and now with 9.3, for all my runs of checkinstall. Ideas? P.S. I did ask about this in SLE. No answer. I hope it is not considered O.T. here. - -- Cheers, Carlos Robinson -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.0 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFCrsmBtTMYHG2NR9URAjIbAJ4iamNOC2cZSEINF1mgZgwbz+sf3ACdEtyr WG+s2Tl9+t9Evehfd0PI08Y= =50IR -----END PGP SIGNATURE-----

1 0

what is current X font?
by Colin Carter 13 Jun '05

13 Jun '05

Hi, I see the following X Window functions: XLoadQueryFont() XSetFont() XUnloadFont() XFreeFont() and of course one uses a XFontStruct to hold the info. But, does anybody know how to load a font structure with the values of the current font. i.e. How do I find out what the current font is? I only want Xlib or Xt functions. Thanks for hints, Colin

2 2