Hallo David, * David Haller schrieb: [...]
Bei 2.6 ist semaphore.h in linux/ und config.h gibt's nimmer (bzw. nur noch bei einzelnen Treibern "intern" für diese). Glaube autoconf.h hat die Funktion bekommen.
Unter Suse 9.2 (Kernel 2.6.8) lief die Webcam. Komisch.
Wo gibt's den Treiber denn? Dann guck ich mal rein.
http://www.ovcam.org/ -> http://www.ovcam.org/ov511/ Dort unterschiedliche Treiberpakete. Ganz unten angeblich auch eines für 2.6.-er Kernel, bei einem make verlangen die aber alle eine config.h. Beim Einstecken der TerraCam USB (nicht TerraCam Pro USB!): usb 2-3: new full speed USB device using ohci_hcd and address 10 usb 2-3: configuration #1 chosen from 1 choice ov511: USB OV518+ video device found ov511: Device revision 0 ov511: Compression required with OV518...enabling ov511: Sensor is an OV7620AE ov511: Device at usb-0000:00:0b.0-3 registered to minor 0 usb 2-3: New USB device found, idVendor=05a9, idProduct=a518 usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-3: Product: USB Camera usb 2-3: Manufacturer: OmniVision Technologies, Inc. ov511: No decompressor available Bisher war es mit einem "Hack" möglich, dass ein Modul "ovcamchip" erzeugt wurde, das diesen "decompressor" bedient hat. Zur Info: diese Webcam komprimiert den Datenstrom mit einem Chip und daher bedarf es dieses Modules. So hatte ich unter Suse 9.2 (2.6.8') kompiliert (rex3 war 100% kernel 2.6.8, später 2.6.12): ============================================================================================ gerlach@rex3:~/install/ov511-2.27> make Building OVCam drivers for 2.6 kernel. PLEASE IGNORE THE "Overriding SUBDIRS" WARNING make -C /lib/modules/2.6.8-24.16-default/build SUBDIRS=/home/gerlach/install/ov511-2.27 modules make[1]: Entering directory `/usr/src/linux-2.6.8-24.16-obj/i386/default' [...] make -C ../../../linux-2.6.8-24.16 O=../linux-2.6.8-24.16-obj/i386/default modules CC [M] /home/gerlach/install/ov511-2.27/ov511_core.o /home/gerlach/install/ov511-2.27/ov511_core.c:1674: error: `I2C_ADAP_CLASS_CAM_DIGITAL' undeclared here (not in a function) /home/gerlach/install/ov511-2.27/ov511_core.c:1674: error: initializer element is not constant /home/gerlach/install/ov511-2.27/ov511_core.c:1674: error: (near initialization for `i2c_adap_template.class') make[4]: *** [/home/gerlach/install/ov511-2.27/ov511_core.o] Fehler 1 make[3]: *** [_module_/home/gerlach/install/ov511-2.27] Fehler 2 make[2]: *** [modules] Fehler 2 make[1]: *** [modules] Fehler 2 make[1]: Leaving directory `/usr/src/linux-2.6.8-24.16-obj/i386/default' Der Hack: ========= --> This is a quick fix, simply changing I2C_ADAP_CLASS_CAM_DIGITAL to I2C_CLASS_CAM_DIGITAL in ovfx2.c and ov511_core.c will let the drivers compile. n=ovfx2.c;cat $n | sed 's/I2C_ADAP_CLASS_CAM_DIGITAL/I2C_CLASS_CAM_DIGITAL/' > /tmp/~fgfg;mv /tmp/~fgfg $n n=ov511_core.c;cat $n| sed 's/I2C_ADAP_CLASS_CAM_DIGITAL/I2C_CLASS_CAM_DIGITAL/' > /tmp/~fgfg;mv /tmp/~fgfg $n gerlach@rex3:~/install/ov511-2.27> make Building OVCam drivers for 2.6 kernel. PLEASE IGNORE THE "Overriding SUBDIRS" WARNING make -C /lib/modules/2.6.8-24.16-default/build SUBDIRS=/home/gerlach/install/ov511-2.27 modules make[1]: Entering directory `/usr/src/linux-2.6.8-24.16-obj/i386/default' make -C ../../../linux-2.6.8-24.16 O=../linux-2.6.8-24.16-obj/i386/default modules CC [M] /home/gerlach/install/ov511-2.27/ov511_core.o CC [M] /home/gerlach/install/ov511-2.27/ov511_decomp.o CC [M] /home/gerlach/install/ov511-2.27/ov518_decomp.o CC [M] /home/gerlach/install/ov511-2.27/ovcamchip_core.o CC [M] /home/gerlach/install/ov511-2.27/ov6x20.o CC [M] /home/gerlach/install/ov511-2.27/ov6x30.o CC [M] /home/gerlach/install/ov511-2.27/ov7x10.o CC [M] /home/gerlach/install/ov511-2.27/ov7x20.o CC [M] /home/gerlach/install/ov511-2.27/ov76be.o LD [M] /home/gerlach/install/ov511-2.27/ovcamchip.o LD [M] /home/gerlach/install/ov511-2.27/ov511.o CC [M] /home/gerlach/install/ov511-2.27/ovfx2.o CC [M] /home/gerlach/install/ov511-2.27/saa7111-new.o CC [M] /home/gerlach/install/ov511-2.27/tuner.o CC [M] /home/gerlach/install/ov511-2.27/tda7313.o Building modules, stage 2. MODPOST CC /home/gerlach/install/ov511-2.27/ov511.mod.o LD [M] /home/gerlach/install/ov511-2.27/ov511.ko CC /home/gerlach/install/ov511-2.27/ovcamchip.mod.o LD [M] /home/gerlach/install/ov511-2.27/ovcamchip.ko CC /home/gerlach/install/ov511-2.27/ovfx2.mod.o LD [M] /home/gerlach/install/ov511-2.27/ovfx2.ko CC /home/gerlach/install/ov511-2.27/saa7111-new.mod.o LD [M] /home/gerlach/install/ov511-2.27/saa7111-new.ko CC /home/gerlach/install/ov511-2.27/tda7313.mod.o LD [M] /home/gerlach/install/ov511-2.27/tda7313.ko CC /home/gerlach/install/ov511-2.27/tuner.mod.o LD [M] /home/gerlach/install/ov511-2.27/tuner.ko make[1]: Leaving directory `/usr/src/linux-2.6.8-24.16-obj/i386/default' dann noch ein modprobe ovcamchip und schon gehts mit effectv, xawtv =============================== soweit meine Notizen. Ich vermute bei Suse 9.2 war noch übergangsweise was dabei, dass ein config.h gefunden wurde. Ich könnte meine alte Suse 9.2 mal hochfahren und nachsehen, bringt das was? Ich habe hier 3 Stück von diesen Webcam's. Gerne schenke ich Dir eine. Du schaffst das sicherlich in Kürze. Gruss Ekkard -- To unsubscribe, e-mail: opensuse-programming-de+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-programming-de+help@opensuse.org