Hallo David, hallo Liste, also, zuerst habe ich nun ein Verzeichnis /homepages/37/d19249310/htdocs/bko/myLibs/ erzeugt. Und das frische DBI-Modul von CPAN liegt nun entpackt im Verzeichnis /homepages/37/d19249310/htdocs/bko/tmp/DBI-1.50/ Am Sonntag, den 29.01.2006, 06:22 +0100 schrieb David Haller:
Wie genau ist dein Aufruf von
.... perl Makefile.PL ...
[u6911372: /homepages/37/d19249310/htdocs/bko/tmp/DBI-1.50]$ perl Makefile.PL \ PREFIX=/kunden/homepages/37/d19249310/htdocs/bko/myLibs \ LIB=/kunden/homepages/37/d19249310/htdocs/bko/myLibs Creating DBI::PurePerl test variant: t/zvpp_72childhandles.t [...] Creating DBI::PurePerl test variant: t/zvpp_80proxy.t Checking if your kit is complete... Looks good Writing Makefile for DBI ************************************************************************** Perl versions below 5.6.1 are no longer supported by the DBI. Perl versions 5.6.x may fail during installation with a complaint about the use of =head3 in the pod documentation. Press return to continue... ************************************************************************** Can't open PREFIX=/kunden/homepages/37/d19249310/htdocs/bko/myLibs: No such file or directory at Makefile.PL line 24. Can't open LIB=/kunden/homepages/37/d19249310/htdocs/bko/myLibs: No such file or directory at Makefile.PL line 24. I see you're using perl 5.006001 on i386-linux, okay. Remember to actually *read* the README file! Use 'make' to build the software (dmake or nmake on Windows). Then 'make test' to execute self tests. Then 'make install' to install the DBI and then delete this working directory before unpacking and building any DBD::* drivers.
.... make ...
make /usr/bin/perl -I/usr/lib/perl/5.6.1 -I/usr/share/perl/5.6.1 -MExtUtils::Command -e mkpath blib/lib/DBI rm -f blib/lib/DBI/Changes.pm cp Changes blib/lib/DBI/Changes.pm /usr/bin/perl -I/usr/lib/perl/5.6.1 -I/usr/share/perl/5.6.1 -MExtUtils::Command -e mkpath blib/lib/DBI rm -f blib/lib/DBI/Roadmap.pm cp Roadmap.pod blib/lib/DBI/Roadmap.pm /bin/sh -c true cp Driver_xst.h blib/arch/auto/DBI/Driver_xst.h [...] cp lib/DBD/Sponge.pm blib/lib/DBD/Sponge.pm /usr/bin/perl -p -e "s/~DRIVER~/Perl/g" ./Driver.xst > Perl.xsi /usr/bin/perl -I/usr/lib/perl/5.6.1 -I/usr/share/perl/5.6.1 /usr/share/perl/5.6.1/ExtUtils/xsubpp -typemap /usr/share/perl/5.6.1/ExtUtils/typemap -typemap typemap Perl.xs
Perl.xsc && mv Perl.xsc Perl.c cc -c -DDEBIAN -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION="1.50" -DXS_VERSION="1.50" -fPIC -I/usr/lib/perl/5.6.1/CORE -W -Wall -Wpointer-arith -Wbad-function-cast -Wno-comment -Wno-sign-compare -Wno-cast-qual -DDBI_NO_THREADS Perl.c /usr/bin/perl -I/usr/lib/perl/5.6.1 -I/usr/share/perl/5.6.1 /usr/share/perl/5.6.1/ExtUtils/xsubpp -typemap /usr/share/perl/5.6.1/ExtUtils/typemap -typemap typemap DBI.xs DBI.xsc && mv DBI.xsc DBI.c cc -c -DDEBIAN -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION="1.50" -DXS_VERSION="1.50" -fPIC -I/usr/lib/perl/5.6.1/CORE -W -Wall -Wpointer-arith -Wbad-function-cast -Wno-comment -Wno-sign-compare -Wno-cast-qual -DDBI_NO_THREADS DBI.c Running Mkbootstrap for DBI () chmod 644 DBI.bs rm -f blib/arch/auto/DBI/DBI.so LD_RUN_PATH="" cc -shared -L/usr/local/lib DBI.o -o blib/arch/auto/DBI/DBI.so chmod 755 blib/arch/auto/DBI/DBI.so cp DBI.bs blib/arch/auto/DBI/DBI.bs chmod 644 blib/arch/auto/DBI/DBI.bs /usr/bin/perl -Iblib/arch -Iblib/lib -I/usr/lib/perl/5.6.1 -I/usr/share/perl/5.6.1 dbiproxy.PL dbiproxy Extracted dbiproxy from dbiproxy.PL with variable substitutions. cp dbiproxy blib/script/dbiproxy /usr/bin/perl -I/usr/lib/perl/5.6.1 -I/usr/share/perl/5.6.1 -MExtUtils::MakeMaker -e "MY->fixin(shift)" blib/script/dbiproxy /usr/bin/perl -Iblib/arch -Iblib/lib -I/usr/lib/perl/5.6.1 -I/usr/share/perl/5.6.1 dbiprof.PL dbiprof Extracted dbiprof from dbiprof.PL with variable substitutions. cp dbiprof blib/script/dbiprof /usr/bin/perl -I/usr/lib/perl/5.6.1 -I/usr/share/perl/5.6.1 -MExtUtils::MakeMaker -e "MY->fixin(shift)" blib/script/dbiprof Manifying blib/man3/Roadmap.3pm [...] Manifying blib/man3/DBD::Sponge.3pm Perl.xs: In function `dbd_st_rows': Perl.xs:39: warning: unused parameter `h' Perl.c: In function `XS_DBD__Perl__dr_data_sources': [...] Perl.c: In function `boot_DBD__Perl': Perl.c:1064: warning: unused parameter `cv' Perl.c: At top level: dbipport.h:529: warning: `my_sv_2pvbyte' defined but not used DBI.xs: In function `dbih_clearcom': DBI.xs:1183: warning: unused variable `Perl___notused' [...]
.... make test ...
make test /bin/sh -c true PERL_DL_NONLAZY=1 /usr/bin/perl -Iblib/arch -Iblib/lib -I/usr/lib/perl/5.6.1 -I/usr/share/perl/5.6.1 -e 'use Test::Harness qw(&runtests $verbose); $verbose=0; runtests @ARGV;' t/*.t t/01basics..........ok, 4/131 skipped: developer tests t/02dbidrv..........ok t/03handle..........ok t/04mods............ok t/05thrclone........skipped: this linux perl 5.006001 not configured to support iThreads t/06attrs...........ok [...] t/11fetch...........ok t/14utf8............skipped: Requires perl 5.8 t/15array...........ok [...] t/70callbacks.......ok t/72childhandles....skipped: Scalar::Util::weaken not available t/80proxy...........ok t/pod...............skipped: Test::Pod 1.00 required for testing POD t/zvpp_01basics.....ok, 6/131 skipped: various reasons t/zvpp_02dbidrv.....ok, 10/51 skipped: various reasons t/zvpp_03handle.....ok, 76/135 skipped: various reasons t/zvpp_04mods.......ok t/zvpp_05thrclone...skipped: this linux perl 5.006001 not configured to support iThreads t/zvpp_06attrs......ok, 7/137 skipped: various reasons t/zvpp_07kids.......skipped: $h->{Kids} attribute not supported for DBI::PurePerl t/zvpp_08keeperr....ok t/zvpp_09trace......ok t/zvpp_10examp......ok, 39/253 skipped: various reasons t/zvpp_11fetch......ok t/zvpp_14utf8.......skipped: Requires perl 5.8 t/zvpp_15array......ok t/zvpp_20meta.......ok t/zvpp_30subclass...ok t/zvpp_40profile....skipped: profiling not supported for DBI::PurePerl t/zvpp_41prof_dump..skipped: profiling not supported for DBI::PurePerl t/zvpp_42prof_data..skipped: profiling not supported for DBI::PurePerl t/zvpp_43profenv....skipped: profiling not supported for DBI::PurePerl t/zvpp_50dbm........ok t/zvpp_60preparse...skipped: preparse not supported for DBI::PurePerl t/zvpp_70callbacks..skipped: $h->{Callbacks} attribute not supported for DBI::PurePerl t/zvpp_72childhandles.skipped: Scalar::Util::weaken not available t/zvpp_80proxy......skipped: DBD::Proxy currently has a problem under DBI::PurePerl All tests successful, 15 tests and 142 subtests skipped. Files=49, Tests=2335, 12 wallclock secs ( 7.23 cusr + 1.06 csys = 829 CPU) PERL_DL_NONLAZY=1 /usr/bin/perl -Iblib/arch -Iblib/lib -I/usr/lib/perl/5.6.1 -I/usr/share/perl/5.6.1 test.pl test.pl DBI test application $Revision: 11.7 $ Switch: DBI 1.50 by Tim Bunce, 1.50 Available Drivers: CSV, DBM, ExampleP, File, Proxy, Sponge, XBase, mysql dbi:ExampleP:: testing 5 sets of 20 connections: Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Made 100 connections in 0 wallclock secs ( 0.01 usr + 0.00 sys = 0.01 CPU) Testing handle creation speed... 16666 NullP sth/s perl 5.006001 i386-linux (gcc 2.95.4 -O2) test.pl done Using /homepages/37/d19249310/htdocs/bko/tmp/DBI-1.50/blib
.... make install ...
make install /bin/sh -c true mkdir /usr/local/lib/perl/5.6.1: Permission denied at /usr/share/perl/5.6.1/ExtUtils/Install.pm line 81 make: *** [pure_site_install] Error 255 Hier nun das Makefile von Zeile 32 bis Zeile 89: # They may have been overridden via Makefile.PL or on the command line AR = ar CC = cc CCCDLFLAGS = -fPIC CCDLFLAGS = -rdynamic DLEXT = so DLSRC = dl_dlopen.xs LD = cc LDDLFLAGS = -shared -L/usr/local/lib LDFLAGS = -L/usr/local/lib LIBC = /lib/libc-2.2.5.so LIB_EXT = .a OBJ_EXT = .o OSNAME = linux OSVERS = 2.4.28-es RANLIB = : SO = so EXE_EXT = FULL_AR = /usr/bin/ar # --- MakeMaker constants section: AR_STATIC_ARGS = cr NAME = DBI DISTNAME = DBI NAME_SYM = DBI VERSION = 1.50 VERSION_SYM = 1_50 XS_VERSION = 1.50 INST_BIN = blib/bin INST_EXE = blib/script INST_LIB = blib/lib INST_ARCHLIB = blib/arch INST_SCRIPT = blib/script PREFIX = /usr SITEPREFIX = $(PREFIX)/local INSTALLDIRS = site INSTALLPRIVLIB = $(PREFIX)/share/perl/5.6.1 INSTALLARCHLIB = $(PREFIX)/lib/perl/5.6.1 INSTALLSITELIB = $(SITEPREFIX)/share/perl/5.6.1 INSTALLSITEARCH = $(SITEPREFIX)/lib/perl/5.6.1 INSTALLVENDORLIB = $(PREFIX)/share/perl5 INSTALLVENDORARCH = $(PREFIX)/lib/perl5 INSTALLBIN = $(PREFIX)/bin INSTALLSCRIPT = $(PREFIX)/bin INSTALLSITEBIN = $(SITEPREFIX)/bin PERL_LIB = /usr/share/perl/5.6.1 PERL_ARCHLIB = /usr/lib/perl/5.6.1 SITELIBEXP = /usr/local/share/perl/5.6.1 SITEARCHEXP = /usr/local/lib/perl/5.6.1 # Dieses ist die Zeile 81 LIBPERL_A = libperl.a FIRST_MAKEFILE = Makefile MAKE_APERL_FILE = Makefile.aperl PERLMAINCC = $(CC) PERL_INC = /usr/lib/perl/5.6.1/CORE PERL = /usr/bin/perl FULLPERL = /usr/bin/perl FULL_AR = /usr/bin/ar Was ich nicht verstehe ist: 1.) Wieso werden PREFIX und LIB nicht im Makefile berücksichtigt? Im Makefile ist davon weit und breit nirgends etwas zu sehen. 2.) Die Fehlermeldung "Can't open PREFIX=/kunden/homepages/37/d19249310/htdocs/bko/myLibs: No such file or directory at Makefile.PL line 24." Wird hier etwa der String "PREFIX=" mit zum Dateinamen gezählt? Wieso das denn? Das Verzeichnis /kunden/..../myLibs/ gibt es ja, habe ich ja selbst angelegt! 3.) Bei "make install": mkdir /usr/local/lib/perl/5.6.1: Permission denied Klar liegt das am Makefile, aber wieso keine Berücksichtigung von PREFIX und LIB ?
Bis wohin "nach oben"? Und bis wohin hast du Schreibzugriff? Rein von der Benamsung solltest du ab /homepages/37/d19249310/ Schreibzugriff haben. Und _dort_ solltest du dann deinen perl-Kram ablegen (also in
Muß ich noch probieren.
Mail bitte mal die Ausgabe von 'env' (bzw. 'set') sowie die von
perl -V sagt u.a.: Characteristics of this binary (from libperl): Compile-time options: USE_LARGE_FILES Built under linux Compiled at Dec 23 2004 16:34:22 @INC: /usr/local/lib/perl/5.6.1 /usr/local/share/perl/5.6.1 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.6.1 /usr/share/perl/5.6.1 /usr/local/lib/site_perl . LG, Ralph