Hallo Ich habe SUSE9.3 und benutze die TV Karte von Terratec Cinergy 400. Die Karte wird von YAST erkannt, aber beim channel scan findet er nichts. Im syslog habe ich folgenden Einträge gefunden. Was stimmt hier nicht und wie kann ich das beheben. Vielen Dank für jegliche Hilfe. May 8 16:44:29 apus kernel: saa7133[0]: found at 0000:03:00.0, rev: 240, irq: 10, latency: 0, mmio: 0x40800000 May 8 16:44:29 apus kernel: PCI: Setting latency timer of device 0000:03:00.0 to 64 May 8 16:44:29 apus kernel: saa7133[0]: subsystem: 153b:1162, board: Terratec Cinergy 400 TV [card=8,insmod option] May 8 16:44:29 apus kernel: saa7133[0]: board init: gpio is 40000 May 8 16:44:29 apus kernel: saa7133[0]: registered input device for IR May 8 16:44:29 apus kernel: saa7133[0]: dsp access wait timeout [bit=WRR] May 8 16:44:29 apus kernel: saa7133[0]: dsp access wait timeout [bit=WRR] May 8 16:44:30 apus kernel: saa7133[0]: i2c eeprom 00: 3b 15 62 11 08 20 1c 55 43 43 a9 1c 55 43 43 a9 May 8 16:44:30 apus kernel: saa7133[0]: i2c eeprom 10: 00 ff e6 07 00 00 00 00 00 00 00 00 00 00 00 00 May 8 16:44:30 apus kernel: saa7133[0]: i2c eeprom 20: 01 00 02 02 01 3e 9b cb 91 03 03 00 07 00 01 00 May 8 16:44:30 apus kernel: saa7133[0]: i2c eeprom 30: 00 02 02 00 00 00 00 00 00 00 00 00 00 00 00 00 May 8 16:44:30 apus modprobe: FATAL: Error inserting tuner (/lib/modules/2.6.11.4-20a-default/kernel/drivers/media/video/tuner.ko): Unknown symbol in module, or unknown parameter (see dmesg) May 8 16:44:30 apus kernel: tuner: Unknown parameter `tuner' May 8 16:44:30 apus kernel: load_module: err 0xfffffffe (dont worry) May 8 16:44:30 apus kernel: saa7133[0]: registered device video0 [v4l2] May 8 16:44:30 apus kernel: saa7133[0]: registered device vbi0 -- Grüsse Sami