Halli-Hallo,
ich habe mir nun eine Terratec DMX-6fire 24/96 zugelegt (war ein
Schnäppchen). Jetzt stehe ich mal wieder ziemlich ratlos vor einem
Installationsproblem und bitte um Hilfe:
Bei dem Versuch der Einrichtung mit YaST 2 und SuSE 7.3 wurde die Karte
sofort erkannt! Verfügbar ist ICE 1712 [Envy 24]. Meine anfängliche Freude
über die versprochene Konfiguration verwandelte sich jedoch in jähes
Entsetzen, als nun ein Fehler auftrat und nichts mehr weiter ging. Der Aufruf
von alsaconf brachte folgende Ausgabe:
Loading driver:
Starting sound driver:
ice1712/lib/modules/2.4.10-4GB/misc/snd-card-ice1712.o: init_module: No such
device
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or IRQ parameters
/lib/modules/2.4.10-4GB/misc/snd-card-ice1712.o: insmod
/lib/modules/2.4.10-4GB/
misc/snd-card-ice1712.o failed
/lib/modules/2.4.10-4GB/misc/snd-card-ice1712.o: insmod snd-card-ice1712
failed
failed
Aplay: version 0.5.10 by Jaroslav Kysela
Error: unable to obtain longname: No such file or directory
Saving the mixer setup used for this in /etc/asound.conf.
It will be restored when you load alsa with "rcalsasound start".
If you save your own mixer settings to this file, run "alsactl store".
alsactl: No soundcards found...
======================================================
You can use aplay to play audio files with ALSA, and almost
any OSS sound tools and games out there should also work.
When you run 'rcalsasound stop' your mixer settings will
be saved to /etc/asound.conf
They will be restored on the next 'rcalsasound start' which
is used to load ALSA.
For adjustment of volumes, please use alsamixer or gamix.
Have a fun!
linux:~ # lspci -v
...
00:0d.0 Multimedia audio controller: IC Ensemble Inc ICE1712 [Envy24] (rev
02)
Subsystem: TERRATEC Electronic GmbH: Unknown device 1138
Flags: bus master, medium devsel, latency 32, IRQ 5
I/O ports at 9000 [size=32]
I/O ports at 8800 [size=16]
I/O ports at 8400 [size=16]
I/O ports at 8000 [size=64]
Capabilities: [80] Power Management version 1
...
Könnte mir mal jemand sagen, was hier eigentlich nicht funktioniert hat?
Warum konnte das Modul nicht geladen werden? Wurde ein Device nicht gefunden?
Ich stehe mal wieder im Dunkeln!
Viele Grüße
Klaus