Hallo Mußte mir den einen solchen Adapter zulegen. Leider gelingt es mir nicht mein ELSA Microlink Office Modem mit Suse 9.2 in Betrieb zu nehmen. Wenn ich den Adapter in den USB Port stecke kommt folgende Meldung: ---------------[/var/log/messages]--------------- Apr 3 14:19:49 95300 kernel: usb 3-1.3: new full speed USB device using address 7 Apr 3 14:19:49 95300 kernel: ehci_hcd 0000:00:1d.7: qh dcdb3380 (#0) state 1 Apr 3 14:19:49 95300 kernel: usb 3-1.3: Product: USB-Serial Controller Apr 3 14:19:49 95300 kernel: usb 3-1.3: Manufacturer: Prolific Technology Inc. Apr 3 14:19:50 95300 /sbin/hotplug[6633]: add usb DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1.3/3-1.3:1.0 Apr 3 14:19:50 95300 kernel: pl2303 3-1.3:1.0: PL-2303 converter detected Apr 3 14:19:50 95300 /sbin/hotplug[6646]: add usb-serial DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1.3/3-1.3:1.0/ttyUSB0 Apr 3 14:19:50 95300 /sbin/hotplug[6646]: nothing to do Apr 3 14:19:50 95300 /sbin/hotplug[6655]: add tty DEVPATH=/class/tty/ttyUSB0 Apr 3 14:19:50 95300 kernel: usb 3-1.3: PL-2303 converter now attached to ttyUSB0 Apr 3 14:19:50 95300 /sbin/hotplug[6617]: add usb DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1.3 Apr 3 14:19:55 95300 /sbin/hotplug[6617]: No drivers for 'USB Prolific Technology Inc. USB-Serial Controller' (from /etc/hotplug/usb.handmap) Apr 3 14:19:55 95300 /sbin/hotplug[6633]: No drivers for 'USB product 67b/2303/300' (from /etc/hotplug/usb.handmap) Apr 3 14:19:56 95300 /sbin/hotplug[6633]: Setup 'pl2303 ' for 'USB product 67b/2303/300' (from /lib/modules/2.6.8-24.13-default/modules.usbmap) Apr 3 14:19:56 95300 /sbin/hotplug[6633]: No drivers for 'USB product 67b/2303/300' (from /etc/hotplug/usb.usermap) Apr 3 14:19:56 95300 /sbin/hotplug[6633]: No drivers for 'USB product 67b/2303/300' (from /etc/hotplug/usb/ISDN.usermap) Apr 3 14:19:56 95300 /sbin/hotplug[6617]: No drivers for 'USB Prolific Technology Inc. USB-Serial Controller' (from /lib/modules/2.6.8-24.13-default/modules.usbmap) Apr 3 14:19:56 95300 /sbin/hotplug[6617]: No drivers for 'USB Prolific Technology Inc. USB-Serial Controller' (from /etc/hotplug/usb.usermap) Apr 3 14:19:56 95300 /sbin/hotplug[6617]: No drivers for 'USB Prolific Technology Inc. USB-Serial Controller' (from /etc/hotplug/usb/ISDN.usermap) Apr 3 14:19:56 95300 /sbin/hotplug[6617]: No drivers for 'USB Prolific Technology Inc. USB-Serial Controller' (from /etc/hotplug/usb/alsasound.usermap) Apr 3 14:19:56 95300 /sbin/hotplug[6633]: No drivers for 'USB product 67b/2303/300' (from /etc/hotplug/usb/alsasound.usermap) Apr 3 14:19:56 95300 /sbin/hotplug[6633]: No drivers for 'USB product 67b/2303/300' (from /etc/hotplug/usb/sane-hardcoded.usermap) Apr 3 14:19:56 95300 /sbin/hotplug[6633]: No drivers for 'USB product 67b/2303/300' (from /etc/hotplug/usb/tascam_fw.usermap) Apr 3 14:19:56 95300 /sbin/hotplug[6617]: No drivers for 'USB Prolific Technology Inc. USB-Serial Controller' (from /etc/hotplug/usb/sane-hardcoded.usermap) Apr 3 14:19:56 95300 /sbin/hotplug[6617]: No drivers for 'USB Prolific Technology Inc. USB-Serial Controller' (from /etc/hotplug/usb/tascam_fw.usermap) Apr 3 14:19:56 95300 /sbin/hotplug[6617]: No drivers for 'USB Prolific Technology Inc. USB-Serial Controller' (from /etc/hotplug/usb/usbcam.usermap) Apr 3 14:19:56 95300 /sbin/hotplug[6633]: No drivers for 'USB product 67b/2303/300' (from /etc/hotplug/usb/usbcam.usermap) Apr 3 14:20:00 95300 /etc/dev.d/tty/50-visor.dev[6771]: add tty device /class/tty/ttyUSB0 ------------------------------------------------------------------------------------ Daraus entnehme ich das es sich um ein pl2303 Chip handelt welcher in den USB-232 Adapter eingebaut ist. Es wird aber kein Treiber gefunden. Oder wird eine Camera mit USB Anschluß identifiziert? Zum Schluß wird das Script tty50-visor.dev abgearbeitet. Da diese Adapter mit pl2303 angeblich keine Probleme mit Linux haben soll, versuchte ich das angeschlossene Modem trotzdem zu installieren. In YaST- Netzwerkgeräte- Modem- taucht das Elsamodem nicht wie sonst auf. Habe es also als - Andere (nicht erkannte) - konfiguriert. Als Modemgerät - /dev/ttyUSB0 - eingetragen. Starte ich nun Kinternet sagt das Protokoll folgendes: -------------------------------------------------------- SuSE Meta pppd (smpppd-ifcfg), Version 1.50 on 95300. Status is: disconnected trying to connect to smpppd connect to smpppd Status is: disconnected Status is: connecting Status is: disconnected pppd[0] died: pppd options error (exit code 2) ---------------[/var/log/messages]--------------- Apr 3 18:04:17 95300 pppd[6365]: unrecognized option '/dev/ttyUSB0' ------------------------------------------------------- ttyUSB0 wird also nicht erkannt. Naja, in /dev ist auch keine Datei ttyUSB0 vorhanden. ttyUSB1 bis 3 schon. Also versuchte ich es mit ttyUSB1, leider auch erfolglos. ---------------------------------------------------------- SuSE Meta pppd (smpppd-ifcfg), Version 1.50 on 95300. Status is: disconnected trying to connect to smpppd connect to smpppd Status is: disconnected Status is: connecting pppd[0]: Plugin passwordfd.so loaded. pppd[0]: Failed to open /dev/ttyUSB1: No such device Status is: disconnected pppd[0] died: Serial port open failed (exit code 7) ---------------[/var/log/messages]--------------- Apr 3 18:32:25 95300 pppd[6584]: Plugin passwordfd.so loaded. Apr 3 18:32:25 95300 pppd[6584]: pppd 2.4.2 started by root, uid 0 Apr 3 18:32:25 95300 pppd[6584]: Failed to open /dev/ttyUSB0: No such device Apr 3 18:32:25 95300 pppd[6584]: Exit. Apr 3 18:34:12 95300 pppd[6705]: Plugin passwordfd.so loaded. Apr 3 18:34:12 95300 pppd[6705]: pppd 2.4.2 started by root, uid 0 Apr 3 18:34:12 95300 pppd[6705]: Failed to open /dev/ttyUSB1: No such device Apr 3 18:34:12 95300 pppd[6705]: Exit. -------------------------------------------------------- Da ich kein Spezie bin, muß ich jetzt aufgeben und um Hilfe Bitten. Gruß Otto