November 2020 - openSUSE Kubic - openSUSE Mailing Lists

[opensuse-kubic] MicroOS error when setting container memory limit
by Sébastien 'sogal' Poher 11 Mar '21

11 Mar '21

Hi, On a fresh MicroOS install with podman, when I want to set memory limit for a container (using the -m flag) I get the following error: Error: container_linux.go:367: starting container process caused: process_linux.go:459: container init caused: process_linux.go:422: setting cgroup config for procHooks process caused: cannot set memory limit: container could not join or create cgroup: OCI runtime error I am not able to understand the nature of the error. Searching around, I found similar issue where adding cgroup_enable=memory parameter to boot settings in Grub might solve the issue. Is that correct ? If so, what is the proper way to update Grub config on a RO filesystem ? podman version 2.0.4 podman info (ociRuntime part): ociRuntime: name: runc package: runc-1.0.0~rc91-1.2.x86_64 path: /usr/bin/runc version: |- runc version 1.0.0-rc91 spec: 1.0.2-dev Regards, -- Sébastien 'sogal' Poher > When there's no more room at school, the dumb will walk the Earth!

5 10

[opensuse-kubic] MicroOS (Desktop) and PolicyKit stuff
by Dario Faggioli 02 Dec '20

02 Dec '20

Hello, I was having a look at that little issue that we have with MicroOS Desktop asking passwords every 3 seconds, and I think I bumped into something I'm not sure I understand. So, one operation for which it asks for the root password (when it shouldn't, e.g., Tumbleweed doesn't, for doing that) is when I plug an USB key. In order to understand what is going on, I added some logging to polkitd, and here's what I've found. On Tumbleweed: nov 26 11:57:27 Palanthas polkitd[14840]: <no filename>:2: action=[Action id='com.endlessm.ParentalControls.AppFilter.ReadOwn'] nov 26 11:57:27 Palanthas polkitd[14840]: <no filename>:3: subject=[Subject pid=2321 user='dario' groups=audio,bin,dialout,docker,kvm,lp,mail,tty,video,vnc,wheel,dario,users,libvirt,osc seat=null session=nul> nov 26 11:57:27 Palanthas polkitd[14840]: <no filename>:1027: com.endlessm.ParentalControls.AppFilter.ReadOwn => yes On MicroOS: nov 26 10:27:31 Wayrath polkitd[9619]: <no filename>:2: action=[Action id='org.freedesktop.udisks2.filesystem-mount' device='/dev/sdd1' polkit.message='Authentication is required to mount $(drive)' partition> nov 26 10:27:31 Wayrath polkitd[9619]: <no filename>:3: subject=[Subject pid=1754 user='dario' groups=users,wheel,dario seat=null session=null local=true active=true] nov 26 10:27:31 Wayrath polkitd[9619]: <no filename>:1026: org.freedesktop.udisks2.filesystem-mount => auth_admin So, why 'yes' on one hand and 'auth_admin' on the other? Well, the code is in /etc/polkit-1/rules.d/90-default-privs.rules (at the bottom). There's a big array with all the actions and, on Tumbleweed, I have this, for the action above: 'org.freedesktop.udisks2.filesystem-mount': [ 'auth_admin', 'auth_admin', 'yes' ], While on MicroOS: 'org.freedesktop.udisks2.filesystem-mount': [ 'auth_admin', 'auth_admin', 'auth_admin' ], So here's from where 'yes' and 'auth_admin' come from. Now, let's do the same dance again. Tumbleweed: $ rpm -qf /etc/polkit-1/rules.d/90-default-privs.rules polkit-default-privs-1550+20201119.2c1dce4-1.1.noarch MicroOS $ rpm -qf /etc/polkit-1/rules.d/90-default-privs.rules polkit-default-privs-1550+20201119.2c1dce4-1.1.noarch So, same package, different content. I'm sure there's a way to understand why that is, probably looking at: https://build.opensuse.org/package/view_file/openSUSE:Factory/polkit-defaul… And: https://github.com/openSUSE/polkit-default-privs And I plan to do so, but I haven't had the time yet. However, it's definitely not my field. So, if anyone more knowledgeable on these matters want to beat me at it, please, feel free :-) Thanks and Regards -- Dario Faggioli, Ph.D http://about.me/dario.faggioli Virtualization Software Engineer SUSE Labs, SUSE https://www.suse.com/ ------------------------------------------------------------------- <<This happens because _I_ choose it to happen!>> (Raistlin Majere)

5 13

[opensuse-kubic] New MicroOS snapshot 20201129 released!
by Richard Brown 30 Nov '20

30 Nov '20

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=microos&groupid=1&version… https://bugzilla.opensuse.org/buglist.cgi?product=openSUSE%20Tumbleweed&com… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: bluez-firmware evolution-data-server (3.38.1 -> 3.38.2) flatpak (1.8.2 -> 1.8.3) fuse glibmm2_4 (2.64.2 -> 2.64.4) gnome-calculator (3.38.1 -> 3.38.2) gnome-control-center (3.38.1 -> 3.38.2) gnome-desktop (3.38.1 -> 3.38.2) gnome-settings-daemon gnome-user-docs (3.38.1 -> 3.38.2) gpg2 (2.2.24 -> 2.2.25) gtk3 (3.24.23 -> 3.24.23+118) kbd kernel-default-base libical libical-glib libksba (1.4.0 -> 1.5.0) libostree (2020.3 -> 2020.8) librsvg (2.50.1 -> 2.50.2) libsigc++2 (2.10.4 -> 2.10.6) libxml2 malcontent nautilus (3.38.1 -> 3.38.2) patterns-microos python-attrs (20.2.0 -> 20.3.0) python-certifi (2020.6.20 -> 2020.11.8) python38 python38-core toolbox (1.0+git20200831.d2d2e5d -> 1.0+git20201126.3d26283) tracker tracker-miners vim (8.2.1975 -> 8.2.2039) webkit2gtk3 (2.30.2 -> 2.30.3) yast2 (4.3.41 -> 4.3.44) yelp (3.38.1 -> 3.38.2) yelp-xsl (3.38.1 -> 3.38.2) === Details === ==== bluez-firmware ==== - use %_firmwaredir ==== evolution-data-server ==== Version update (3.38.1 -> 3.38.2) Subpackages: libcamel-1_2-62 libebackend-1_2-10 libebook-1_2-20 libebook-contacts-1_2-3 libecal-2_0-1 libedata-book-1_2-26 libedata-cal-2_0-1 libedataserver-1_2-25 libedataserverui-1_2-2 - Update to version 3.38.2: + Calendar: Fix a possible leak in e_cal_util_parse_ics_string() + ECalCache: Avoid runtime warning from ecc_update_timezones_table() + EReminderWatcher: Default alarm range should be from the day begin + EBufferTagger: Derive link color from the theme + EBook/CalBackend: Correct free function for the pending_operations queue + Bugs fixed: glgo#GNOME/evolution-data-server#81, glgo#GNOME/evolution-data-server#257, glgo#GNOME/evolution-data-server#260, glgo#GNOME/evolution-data-server#269, glgo#GNOME/evolution-data-server#272, glgo#GNOME/evolution-data-server#273, glgo#GNOME/evolution-data-server!46, glgo#GNOME/evolution-data-server!47, glgo#GNOME/evolution-data-server!50. + Updated translations. ==== flatpak ==== Version update (1.8.2 -> 1.8.3) Subpackages: libflatpak0 system-user-flatpak typelib-1_0-Flatpak-1_0 - Update to version 1.8.3: + Fixed progress reporting for OCI and extra-data. + The in-memory summary cache is more efficient. + Fixed authentication getting stuck in a loop in some cases. + Fixed authentication error reporting. + We now extract OCI info for runtimes as well as apps. + Fixed crash if anonymous authentication fails and -y is specified. + flatpak info now only looks at the specified installation if one is specified. + Better error reporting for server HTTP errors during download. + Uninstall now removes applications before the runtime it depends on. + Fixed test-suite to pass with the latest OSTree version. + Fixed dbus environment variables in flatpak enter. + Avoid updating metadata from the remote when uninstalling. + Fixed error message handling in various places. + FlatpakTransaction now verifies all passed in refs to avoid. + potential issues with invalid names. + Updated translations. ==== fuse ==== Subpackages: libfuse2 - prepare usrmerge (boo#1029961) ==== glibmm2_4 ==== Version update (2.64.2 -> 2.64.4) Subpackages: libgiomm-2_4-1 libglibmm-2_4-1 - Update to version 2.64.4: + Glib: PropertyProxyConnectionNode::connect_changed(): Fix using without property name. + gmmproc: - Add optional decl_prefix parameter to _WRAP_GERROR and _WRAP_ENUM. Used for adding GLIBMM_API or similar for MS Visual C++. - Allow decorating comparison operators (for Visual Studio builds). - _CLASS_BOXEDTYPE, _CLASS_OPAQUE_COPYABLE: Fix move assignment. - Decorate private generated classes with __declspec when building with Visual Studio. - generate_wrap_init.pl.in: Use g_type_ensure(SomeClass::get_type()) to ensure that get_type() is called. + Build: - Use __declspec(dllexport) consistently when building glibmm with Visual Studio. - Meson build: Set default value of the 'warnings' option to 'min'. - Improve NMake support. - Improve Visual Studio support. - docs/reference/: Update for Doxygen >= 1.8.16. - Meson build: Fix versioning on macOS. + Documentation: - Glib::BalancedTree docs: Recommend std::map or std::unordered_map. - Meson build: Add missing Glib::Value and Variant documentation. - Add meson BuildRequires and macros, following upstreams port. - Add doxygen, graphviz-devel and xsltproc BuildRequires: Needed for building documentation. ==== gnome-calculator ==== Version update (3.38.1 -> 3.38.2) - Update to version 3.38.2: + Fixed radians and degrees preference swapped. + Updated translations. ==== gnome-control-center ==== Version update (3.38.1 -> 3.38.2) Subpackages: gnome-control-center-goa - Update to version 3.38.2: + Applications: Fix NULL hash table being unreffed. + Keyboard: Fix gtk_widget_get_can_default assertion error. + Network: Correctly detect when ethernet devices are hotplugged. + Printers: - Make printers panel have a smaller minimum width. - Fix leak of printer name in callbacks. + Sharing: Disable Tracker 3. + Sound: Update libgvc to add support for recent UCM related changes in ALSA and PulseAudio. + Users: Fix free of const string. + Wacom: Fix a critical warning if loading a cursor fails. + Updated translations. ==== gnome-desktop ==== Version update (3.38.1 -> 3.38.2) Subpackages: gnome-version libgnome-desktop-3-19 libgnome-desktop-3_0-common typelib-1_0-GnomeDesktop-3_0 - Update to version 3.38.2: + Updated translations. ==== gnome-settings-daemon ==== - No longer pass - -libexecdir=%{_libexecdir}/gnome-settings-daemon-3.0 to meson, but revert back to the default. The generated files contain use libexecdir for own generated files (correct) but also to identify where to find gnome-session-ctl, which for obvious reasons is not in libexecdir/gnome-settings-daemon-3.0. ==== gnome-user-docs ==== Version update (3.38.1 -> 3.38.2) - Update to version 3.38.2: + Improvements to docs for Contacts. + Improvements to docs for Files. + Updates to docs for background settings. + Updated translations. ==== gpg2 ==== Version update (2.2.24 -> 2.2.25) - GnuPG 2.2.25: * scd: Fix regression in 2.2.24 requiring gpg --card-status before signing or decrypting * gpgsm: Using Libksba 1.5.0 signatures with a rarely used combination of attributes can now be verified ==== gtk3 ==== Version update (3.24.23 -> 3.24.23+118) Subpackages: gtk3-data gtk3-schema gtk3-tools libgtk-3-0 typelib-1_0-Gtk-3_0 - Update to version 3.24.23+118: + cssnode: Bail out nicely if there is no settings (#2780). + gdk/wayland: Add support for primary-selection-unstable-v1 (#2591). + wayland: Emit dummy configure event when resizing while fixed. + colorchooser: Backport the new color palette. + gdk: Fix parent relative background crash. + Updated translations. ==== kbd ==== Subpackages: kbd-legacy - prepare usrmerge (boo#1029961) ==== kernel-default-base ==== - Add wireguard (boo#1179225) ==== libical ==== - Add libical-read-v2-v3-data.patch: correctly read slim timezone data (bsc#1178412). ==== libical-glib ==== - Add libical-read-v2-v3-data.patch: correctly read slim timezone data (bsc#1178412). ==== libksba ==== Version update (1.4.0 -> 1.5.0) - libksba 1.5.0: * ksba_cms_identify now identifies OpenPGP keyblock content * Supports TR-03111 plain format ECDSA signature verification * Fixes a CMS signed data parser bug exhibited by a somewhat strange CMS message - remove deprecated texinfo macros and update signing keyring ==== libostree ==== Version update (2020.3 -> 2020.8) Subpackages: libostree-1-1 - Update to version 2020.8: + This release mostly contains scalability improvements and bugfixes. + Caching-related HTTP headers are now supported on summaries and signatures, so that they do not have to be re-downloaded if not changed in the meanwhile. + Summaries and delta have been reworked to allow more fine-grained fetching. + Finally, this fixes several bugs related to atomic variables, HTTP timeouts, and 32-bit architectures. - Changes from version 2020.7: + Static deltas can now be signed to more easily support offline verification. + There's now support for multiple initramfs images; the idea here is that one can have a "main" initramfs image and a secondary one which represents local configuration. + The documentation is now moved to https://ostreedev.github.io/ostree/ + Lot of preparatory cleanups to the pull code landed for upcoming work on indexing deltas outside of the summary. + On the bugfix side, the biggest one is a fix for an assertion failure when upgrading from systems before ostree supported devicetree. + Also notable is that ostree no longer hardlinks zero sized files to avoid hitting filesystem maximum link counts. - Changes from version 2020.6: + One notable feature: ostree now supports / and /boot being on the same filesystem. + Other than that it's mostly bugfixes; there is one quite important one for anyone using the readonly=true for /sysroot (which is still just Fedora CoreOS I suspect). + There's some improvements to the GObject Introspection metadata, some (cosmetic) static analyzer fixes, a fix for the immutable bit on s390x, dropping a deprecated bit in the systemd unit file, etc. - Changes from version 2020.5: + This release primarily fixes a regression in 2020.4 where the "readonly sysroot" changes incorrectly left the sysroot read-only on systems that started out with a read-only / (most of them, e.g. Fedora Silverblue/IoT at least). + There's some additions to the pull API to aid flatpak. + There were a few fixes to the man pages, and ostree show now displays the parent commit. + The default dracut config now enables reproducibility. + On the "feature" side, there is a new ostree admin unlock - -transient. We expect this to be a foundation for further support for "live" updates. - Changes from version 2020.4: + By far the biggest change in this release is new ed25519 signing support, powered by libsodium. + stree commit gained a new --base argument, which significantly simplifies constructing "derived" commits, particularly for systems using SELinux. + Handling of the read-only sysroot was reimplemented to run in the initramfs and be more reliable. Enabling the readonly=true flag in the repo config is recommended. + Several bugs were fixed in locking for the temporary "staging" directories OSTree creates, particularly on NFS. + lib: Coerce flags enums to GIR bitfields changed some values to be (correctly) flags - this may show up as incompatible for GObject Introspection consumers (but not C). + A new timestamp-check-from-rev option was added for pulls, which makes downgrade protection more reliable and will be used by Fedora CoreOS. + Several fixes and enhancements were made for "collection" pulls including a new --mirror option. + The ostree commit command learned a new --mode-ro-executables which enforces W^R semantics on all executables. + A new commit metadata key (OSTREE_COMMIT_META_KEY_ARCHITECTURE) was added to help standardize the architecture of the OSTree commit. This could be used on the client side for example to sanity-check that the commit matches the architecture of the machine before deploying. ==== librsvg ==== Version update (2.50.1 -> 2.50.2) Subpackages: gdk-pixbuf-loader-rsvg librsvg-2-2 rsvg-thumbnailer typelib-1_0-Rsvg-2_0 - Update to version 2.50.2: + Fix dx/dy offsets in nested <tspan> elements. ==== libsigc++2 ==== Version update (2.10.4 -> 2.10.6) - Update to version 2.10.6: + Build: Meson build: Fix versioning on macOS. + Documentation: - sigc++/sigc++.h: Describe how to use libsigc++ with Meson. - Update links to the web page, now at libsigcplusplus.github.io/libsigcplusplus. ==== libxml2 ==== Subpackages: libxml2-2 libxml2-tools - Avoid quadratic checking of identity-constraints: [bsc#1178823] * key/unique/keyref schema attributes currently use qudratic loops to check their various constraints (that keys are unique and that keyrefs refer to existing keys). * This fix uses a hash table to avoid the quadratic behaviour. - Add libxml2-Avoid-quadratic-checking-of-identity-constraints.patch ==== malcontent ==== Subpackages: libmalcontent-0-0 libmalcontent-ui-0-0 typelib-1_0-Malcontent-0 - Don't actually install com.endlessm.ParentalControls.rules: this just grants 'wheel'-group members access without password; as openSUSE does not support 'wheel' by default, we only ship the file as sample file (boo#1177974#c8). ==== nautilus ==== Version update (3.38.1 -> 3.38.2) Subpackages: libnautilus-extension1 - Update to version 3.38.2: + Search for tracker3 in PATH. + Fix batch rename dialog crashes. + Fix double-click row check. + Updated translations. ==== patterns-microos ==== Subpackages: patterns-microos-alt_onlyDVD patterns-microos-apparmor patterns-microos-base patterns-microos-basesystem patterns-microos-cloud patterns-microos-cockpit patterns-microos-defaults patterns-microos-desktop-gnome patterns-microos-desktop-kde patterns-microos-hardware patterns-microos-ima_evm patterns-microos-onlyDVD patterns-microos-selinux patterns-microos-sssd_ldap - Add udisks2 and upower to the Plasma desktop pattern ==== python-attrs ==== Version update (20.2.0 -> 20.3.0) - update to 20.3.0: - ``attr.define()``, ``attr.frozen()``, ``attr.mutable()``, and ``attr.field()`` remain **provisional**. ==== python-certifi ==== Version update (2020.6.20 -> 2020.11.8) - update to 2020.11.8: * Python 3.8+ support - Add two-basic-unit-tests.patch which includes two at least simple test patches (gh#certifi/python-certifi#137). ==== python38 ==== - The Python stdlib >= does not provide importlib_metadata or importlib_resources but importlib.metadata and importlib.resources. If a package specifically asks for importlib_*, they actually require the dedicated package with extended API. ==== python38-core ==== Subpackages: libpython3_8-1_0 python38-base - The Python stdlib >= does not provide importlib_metadata or importlib_resources but importlib.metadata and importlib.resources. If a package specifically asks for importlib_*, they actually require the dedicated package with extended API. ==== toolbox ==== Version update (1.0+git20200831.d2d2e5d -> 1.0+git20201126.3d26283) - Update to version 1.0+git20201126.3d26283: * Make it easier to use custom images (#10) * Update toolbox doc (#9) ==== tracker ==== - split out the datafiles that are required by the tracker-miners ==== tracker-miners ==== Subpackages: tracker-miner-files - require the newly split out tracker-data-files ==== vim ==== Version update (8.2.1975 -> 8.2.2039) Subpackages: vim-data-common vim-small - Updated to version 8.2.2039, fixes the following problems * Cannot backspace in prompt buffer after using cursor-left. (Maxim Kim) * Vim9: error for using a string in a condition is confusing. * Making a mapping work in all modes is complicated. * "term_opencmd" option of term_start() is truncated. (Sergey Vlasov) * Vim9: some tests are not done at the script level. * MinGW: parallel compilation might fail. * Quickfix window not updated when adding invalid entries. * ml_get error when using <Cmd> to open a terminal. * Cannot use :vimgrep in omni completion, causing C completion to fail. * Crash when closing terminal popup with <Cmd> mapping. * Expression test is flaky on Appveyor. * Still in Insert mode when opening terminal popup with a <Cmd> mapping in Insert mode. * Info popup triggers WinEnter and WinLeave autocommands. * Cursor position wrong in terminal popup with finished job. * Coverity warns for not using the ga_grow() return value. * Build fails with small features. * Occasional failure of the netbeans test. * The popup menu can cause too much redrawing. * Vim9: invalid error for argument of extend(). * Window changes when using bufload() while in a terminal popup. * Terminal Cmd test sometimes fails to close popup. * Terminal popup test sometimes fails. * Vim9: dict.key assignment not implemented yet. * Vim9: :def function does not apply 'maxfuncdepth'. * Vim9: lambda argument shadowed by function name. * Build error with +conceal but without +popupwin. * Compiler warning for uninitialized variable. * Redoing a mapping with <Cmd> doesn't work properly. * .pbtxt files are not recognized. * Test for insert mode in popup is not reliable. * Vim9: compiling fails for unreachable return statement. * "syn sync" reports a very large number. * Vim9: confusing error message when using bool wrongly. * Vim9: not skipping white space after unary minus. * Using CTRL-O in a prompt buffer moves cursor to start of the line. * Vim9: literal dict #{} is not like any other language. * Swap file test is a little flaky. * Missing part of the dict change. * Vim9: script variable not found from lambda. * Swap file test fails on MS-Windows. * Some compilers do not like the "namespace" argument. * Vim9: get E1099 when autocommand resets did_emsg. * Vim9: star command recognized errornously. * Vim: memory leak when :execute fails. * Flicker when redrawing a popup with a title and border. * Amiga: Not all colors are used on OS4. * Coverity warns for possibly using not NUL terminated string. * Coverity warns for uninitialized field. * Coverity warns for using an uninitialized variable. * Coverity warns for not checking return value. * Some tests fail on Mac. * Some tests fail when run under valgrind. * Cabalconfig and cabalproject filetypes not recognized. * Vim9: :def without argument gives compilation error. * Vim9: list unpack in for statement not compiled yet. * Current buffer is messed up if creating a new buffer for the quickfix window fails. * Compiler test depends on list of compiler plugins. * Viminfo is not written when creating a new file. ==== webkit2gtk3 ==== Version update (2.30.2 -> 2.30.3) Subpackages: libjavascriptcoregtk-4_0-18 libwebkit2gtk-4_0-37 webkit2gtk-4_0-injected-bundles - Update to version 2.30.3 (boo#1179122): + Add new build option USE(64KB_PAGE_BLOCK). + Fix backdrop filters with rounded borders. + Fix scrolling iframes when async scrolling is enabled. + Allow applications to handle drag and drop on the web view again. + Update Outlook user agent quirk. + Fix the build with video support disabled. + Fix several crashes and rendering issues. + Security fixes: CVE-2020-13584, CVE-2020-9983. - Drop webkit2gtk3-fdo-soname.patch: fixed upstream. - Rebase webkit-process.patch. ==== yast2 ==== Version update (4.3.41 -> 4.3.44) - prepare usrmerge: install legacy symlinks via spec file only (boo#1029961) - CWM ComboBox: an editable ComboBox will not alter the list of items when the current value is not part of the list as it uses the original list which could be already modified (bsc#1177137) - 4.3.43 - CWM ComboBox: reverted the addition of the current_items method (bsc#1177137) - 4.3.42 ==== yelp ==== Version update (3.38.1 -> 3.38.2) Subpackages: libyelp0 - Update to version 3.38.2: + Fix crash when reloading local document. ==== yelp-xsl ==== Version update (3.38.1 -> 3.38.2) - Update to version 3.38.2: + Updated translations.

1 0

[opensuse-kubic] New Kubic snapshot 20201129 released!
by Richard Brown 30 Nov '20

30 Nov '20

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=kubic&groupid=1&version=T… https://bugzilla.opensuse.org/buglist.cgi?product=openSUSE%20Tumbleweed&com… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: fuse gpg2 (2.2.24 -> 2.2.25) kbd kernel-default-base kubernetes1.18 libksba (1.4.0 -> 1.5.0) libxml2 patterns-microos python-attrs (20.2.0 -> 20.3.0) python-certifi (2020.6.20 -> 2020.11.8) python38 python38-core toolbox (1.0+git20200831.d2d2e5d -> 1.0+git20201126.3d26283) vim (8.2.1975 -> 8.2.2039) yast2 (4.3.41 -> 4.3.44) === Details === ==== fuse ==== - prepare usrmerge (boo#1029961) ==== gpg2 ==== Version update (2.2.24 -> 2.2.25) - GnuPG 2.2.25: * scd: Fix regression in 2.2.24 requiring gpg --card-status before signing or decrypting * gpgsm: Using Libksba 1.5.0 signatures with a rarely used combination of attributes can now be verified ==== kbd ==== Subpackages: kbd-legacy - prepare usrmerge (boo#1029961) ==== kernel-default-base ==== - Add wireguard (boo#1179225) ==== kubernetes1.18 ==== - Adding a conflict on kubernetes client common to ensure there are no leftovers after migration from SP1 to SP2 on SLE15. ==== libksba ==== Version update (1.4.0 -> 1.5.0) - libksba 1.5.0: * ksba_cms_identify now identifies OpenPGP keyblock content * Supports TR-03111 plain format ECDSA signature verification * Fixes a CMS signed data parser bug exhibited by a somewhat strange CMS message - remove deprecated texinfo macros and update signing keyring ==== libxml2 ==== Subpackages: libxml2-2 libxml2-tools - Avoid quadratic checking of identity-constraints: [bsc#1178823] * key/unique/keyref schema attributes currently use qudratic loops to check their various constraints (that keys are unique and that keyrefs refer to existing keys). * This fix uses a hash table to avoid the quadratic behaviour. - Add libxml2-Avoid-quadratic-checking-of-identity-constraints.patch ==== patterns-microos ==== Subpackages: patterns-microos-alt_onlyDVD patterns-microos-apparmor patterns-microos-base patterns-microos-basesystem patterns-microos-cloud patterns-microos-cockpit patterns-microos-defaults patterns-microos-hardware patterns-microos-ima_evm patterns-microos-onlyDVD patterns-microos-selinux patterns-microos-sssd_ldap - Add udisks2 and upower to the Plasma desktop pattern ==== python-attrs ==== Version update (20.2.0 -> 20.3.0) - update to 20.3.0: - ``attr.define()``, ``attr.frozen()``, ``attr.mutable()``, and ``attr.field()`` remain **provisional**. ==== python-certifi ==== Version update (2020.6.20 -> 2020.11.8) - update to 2020.11.8: * Python 3.8+ support - Add two-basic-unit-tests.patch which includes two at least simple test patches (gh#certifi/python-certifi#137). ==== python38 ==== - The Python stdlib >= does not provide importlib_metadata or importlib_resources but importlib.metadata and importlib.resources. If a package specifically asks for importlib_*, they actually require the dedicated package with extended API. ==== python38-core ==== Subpackages: libpython3_8-1_0 python38-base - The Python stdlib >= does not provide importlib_metadata or importlib_resources but importlib.metadata and importlib.resources. If a package specifically asks for importlib_*, they actually require the dedicated package with extended API. ==== toolbox ==== Version update (1.0+git20200831.d2d2e5d -> 1.0+git20201126.3d26283) - Update to version 1.0+git20201126.3d26283: * Make it easier to use custom images (#10) * Update toolbox doc (#9) ==== vim ==== Version update (8.2.1975 -> 8.2.2039) Subpackages: vim-data-common vim-small - Updated to version 8.2.2039, fixes the following problems * Cannot backspace in prompt buffer after using cursor-left. (Maxim Kim) * Vim9: error for using a string in a condition is confusing. * Making a mapping work in all modes is complicated. * "term_opencmd" option of term_start() is truncated. (Sergey Vlasov) * Vim9: some tests are not done at the script level. * MinGW: parallel compilation might fail. * Quickfix window not updated when adding invalid entries. * ml_get error when using <Cmd> to open a terminal. * Cannot use :vimgrep in omni completion, causing C completion to fail. * Crash when closing terminal popup with <Cmd> mapping. * Expression test is flaky on Appveyor. * Still in Insert mode when opening terminal popup with a <Cmd> mapping in Insert mode. * Info popup triggers WinEnter and WinLeave autocommands. * Cursor position wrong in terminal popup with finished job. * Coverity warns for not using the ga_grow() return value. * Build fails with small features. * Occasional failure of the netbeans test. * The popup menu can cause too much redrawing. * Vim9: invalid error for argument of extend(). * Window changes when using bufload() while in a terminal popup. * Terminal Cmd test sometimes fails to close popup. * Terminal popup test sometimes fails. * Vim9: dict.key assignment not implemented yet. * Vim9: :def function does not apply 'maxfuncdepth'. * Vim9: lambda argument shadowed by function name. * Build error with +conceal but without +popupwin. * Compiler warning for uninitialized variable. * Redoing a mapping with <Cmd> doesn't work properly. * .pbtxt files are not recognized. * Test for insert mode in popup is not reliable. * Vim9: compiling fails for unreachable return statement. * "syn sync" reports a very large number. * Vim9: confusing error message when using bool wrongly. * Vim9: not skipping white space after unary minus. * Using CTRL-O in a prompt buffer moves cursor to start of the line. * Vim9: literal dict #{} is not like any other language. * Swap file test is a little flaky. * Missing part of the dict change. * Vim9: script variable not found from lambda. * Swap file test fails on MS-Windows. * Some compilers do not like the "namespace" argument. * Vim9: get E1099 when autocommand resets did_emsg. * Vim9: star command recognized errornously. * Vim: memory leak when :execute fails. * Flicker when redrawing a popup with a title and border. * Amiga: Not all colors are used on OS4. * Coverity warns for possibly using not NUL terminated string. * Coverity warns for uninitialized field. * Coverity warns for using an uninitialized variable. * Coverity warns for not checking return value. * Some tests fail on Mac. * Some tests fail when run under valgrind. * Cabalconfig and cabalproject filetypes not recognized. * Vim9: :def without argument gives compilation error. * Vim9: list unpack in for statement not compiled yet. * Current buffer is messed up if creating a new buffer for the quickfix window fails. * Compiler test depends on list of compiler plugins. * Viminfo is not written when creating a new file. ==== yast2 ==== Version update (4.3.41 -> 4.3.44) - prepare usrmerge: install legacy symlinks via spec file only (boo#1029961) - CWM ComboBox: an editable ComboBox will not alter the list of items when the current value is not part of the list as it uses the original list which could be already modified (bsc#1177137) - 4.3.43 - CWM ComboBox: reverted the addition of the current_items method (bsc#1177137) - 4.3.42

1 0

[opensuse-kubic] MicroOS Desktop & GNOME Extensions
by Dario Faggioli 30 Nov '20

30 Nov '20

Hello, So, I was giving some thoughts at the matter in the subject of this email, and here's what I came up with. Personally, I do use a few extensions; not that many, but a few. I also don't think I have spoken with any GNOME user that has not needed and/or installed at least one. Therefore, I'd say it's quite important to have a way to install them, ideally one that is available right after install, without having to fiddle with and tweak the system. Right now we're not shipping any browser. we were shipping Firefox, but got rid of it, since there is a Flatpak. But the flatpak can't handle the extensions. The issue is known, is being debated and maybe will even be fixed at some point. But that may take a while. Some links: https://bugzilla.mozilla.org/show_bug.cgi?id=1633206 https://bugzilla.mozilla.org/show_bug.cgi?id=1621763 https://www.reddit.com/r/gnome/comments/g2emg7/extensionsgnomeorg_firefox_f… https://discussion.fedoraproject.org/t/firefox-flatpak-on-flathub-beta/1787… The last one contains a workaround, but I don't see it as something that we can easily (at some point) put in place like by default, or document and expect users to understand and follow it, TBH. As an alternative, there's this app, available as Flatpak, but it does not handle the installing part of the extension workflow, so it's kind of useless for the purposes of this discussion: https://flathub.org/apps/details/org.gnome.Extensions The only solution I currently see, is to do it from a browser installed in the system, with RPMs. And on that ground, I think we should go back and add one, by default. This of course would apply to the GNOME flavor only. I mean, if we want it in KDE too, for whatever other reason, I don't personally object or anything, I just don't think it'd be necessary there. Thoughts so far? Well, it gets trickier. In fact, if you're tempted to say "Ok, let's go back to including Firefox as an RPM by default", then think about this: what happens if an user then try to use this version of Firefox that we provide, for access multimedia content that requires the coded that we don't ship and that (typically) are in packman? Something like <<oh, there's a browser there already, let's watch Netflix in it!>>. Yeah, well, it does not work. OTOH, on the Firefox from Flathub, of course, it works like a charm. :-/ So now the user is happy, because he/she can install GNOME extensions right away, but is also mad, because he/she needs two Firefox-es installed, if wanting to watch Netflix. :-( I personally am all but sure about what we should do about all this. So, again, thoughts? :-) Thanks and Regards -- Dario Faggioli, Ph.D http://about.me/dario.faggioli Virtualization Software Engineer SUSE Labs, SUSE https://www.suse.com/ ------------------------------------------------------------------- <<This happens because _I_ choose it to happen!>> (Raistlin Majere)

4 7

[opensuse-kubic] New MicroOS snapshot 20201127 released!
by Richard Brown 29 Nov '20

29 Nov '20

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=microos&groupid=1&version… https://bugzilla.opensuse.org/buglist.cgi?product=openSUSE%20Tumbleweed&com… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: c-ares coreutils cpio dosfstools e2fsprogs filesystem fillup findutils grep (3.5 -> 3.6) gzip kernel-firmware (20201023 -> 20201120) keyutils libX11 (1.6.12 -> 1.7.0) libselinux libsepol libtirpc llvm11 openssh qpdf (10.0.3 -> 10.0.4) tar zlib === Details === ==== c-ares ==== - add BR for pkg-config to get the provides in the devel package ==== coreutils ==== - prepare usrmerge (boo#1029961) ==== cpio ==== - prepare usrmerge (boo#1029961) ==== dosfstools ==== - prepare usrmerge (boo#1029961) ==== e2fsprogs ==== Subpackages: libcom_err2 libext2fs2 - prepare usrmerge (boo#1029961) ==== filesystem ==== - /proc and /sys should be %ghost to allow filesystem package updates in rootless container environments (rh#1548403) ==== fillup ==== - prepare usrmerge (boo#1029961) ==== findutils ==== - prepare usrmerge (boo#1029961) ==== grep ==== Version update (3.5 -> 3.6) - Update to grep 3.6 * The GREP_OPTIONS environment variable no longer affects grep's behavior. * grep's DFA matcher performed an invalid regex transformation that would convert an ERE like a+a+a+ to a+a+, which would make grep a+a+a+ mistakenly match "aa". * grep -P now reports the troublesome input filename upon PCRE execution failure. - werror-return-type.patch: work around gcc bug - prepare usrmerge (boo#1029961) ==== gzip ==== - prepare usrmerge (boo#1029961) ==== kernel-firmware ==== Version update (20201023 -> 20201120) Subpackages: kernel-firmware-all kernel-firmware-amdgpu kernel-firmware-ath10k kernel-firmware-atheros kernel-firmware-bluetooth kernel-firmware-bnx2 kernel-firmware-brcm kernel-firmware-chelsio kernel-firmware-dpaa2 kernel-firmware-i915 kernel-firmware-intel kernel-firmware-iwlwifi kernel-firmware-liquidio kernel-firmware-marvell kernel-firmware-media kernel-firmware-mediatek kernel-firmware-mellanox kernel-firmware-mwifiex kernel-firmware-network kernel-firmware-nfp kernel-firmware-nvidia kernel-firmware-platform kernel-firmware-prestera kernel-firmware-qlogic kernel-firmware-radeon kernel-firmware-realtek kernel-firmware-serial kernel-firmware-sound kernel-firmware-ti kernel-firmware-ueagle kernel-firmware-usb-network ucode-amd - Fix build with older distros due to missing _firmwaredir - Update to version 20201120 (bc9cd0b7b0e9): including AMDGPU update (bsc#1179062) and ath11k addition (bsc#1178274) * linux-firmware: Update AMD SEV firmware * amdgpu: add sienna cichlid firmware for 20.45 * amdgpu: update vega20 firmware for 20.45 * amdgpu: update vega12 firmware for 20.45 * amdgpu: update vega10 firmware for 20.45 * amdgpu: update renoir firmware for 20.45 * amdgpu: update navi14 firmware for 20.45 * amdgpu: update navi12 firmware for 20.45 * amdgpu: update navi10 firmware for 20.45 * amdgpu: update raven2 firmware for 20.45 * amdgpu: update raven firmware for 20.45 * rtlwifi: v88.2 firmware files for RTL8192CU * rtw88: RTL8822C: Update firmware to v9.9.4 * Revert "rtw88: RTL8822C: Update firmware to v9.9.4" * vpdma: Move firmware to ti directory * amdgpu: update picasso VCN firmware * amdgpu: update raven2 VCN firmware * amdgpu: update raven VCN firmware * rtw88: RTL8822C: Update firmware to v9.9.4 * rtl_bt: Update RTL8822C BT(USB I/F) FW to 0x099A_281A * QCA: Update Bluetooth firmware for QCA6390 * qcom : updated venus firmware files for v5.4 * QCA : Fixed BT SSR due to command timeout / IO fatal error * ath11k: QCA6390 hw2.0: add to WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 * ath11k: QCA6390 hw2.0: add board-2.bin * ath11k: IPQ8074 hw2.0: add to WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 * ath11k: IPQ8074 hw2.0: add board-2.bin * ath11k: IPQ6018 hw1.0: add to WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 * ath11k: IPQ6018 hw1.0: add board-2.bin * ath10k: QCA6174 hw3.0: add firmware-sdio-6.bin version WLAN.RMH.4.4.1-00077 * ath10k: QCA9984 hw1.0: update firmware-5.bin to 10.4-3.9.0.2-00131 * ath10k: QCA9888 hw2.0: update firmware-5.bin to 10.4-3.9.0.2-00131 * ath10k: QCA6174 hw3.0: update board-2.bin * ath10k: QCA6174 hw3.0: update firmware-6.bin to WLAN.RM.4.4.1-00157-QCARMSWPZ-1 - ath11k is split into its own subpackage due to its size - Update topics list and aliases accordingly ==== keyutils ==== Subpackages: libkeyutils1 - prepare usrmerge (boo#1029961) ==== libX11 ==== Version update (1.6.12 -> 1.7.0) Subpackages: libX11-6 libX11-data libX11-xcb1 - Update to version 1.7.0 * libX11 version 1.7.0 includes a new API, hence the change from the 1.6 series to 1.7: XSetIOErrorExitHandler which provides a mechanism for applications to recover from I/O error conditions instead of being forced to exit. Thanks to Carlos Garnacho for this. * This release includes a bunch of bug fixes, some which have been pending for over three years: + A bunch of nls cleanups to remove obsolete entries and clean up formatting of the ist. Thanks to Benno Schulenberg for these. + Warning fixes and other cleanups across a huge swath of the library. Thanks to Alan Coopersmith for these. + Memory allocation bugs, including leaks and use after free in the locale code. Thanks to Krzesimir Nowak, Jacek Caban and Vittorio Zecca for these. + Thread safety fixes in the locale code. Thanks to Jacek Caban for these. + poll_for_response race condition fix. Thanks to Frediano Ziglio for the bulk of this effort, and to Peter Hutterer for careful review and improvements. * Version 1.7.0 includes a couple of new locales: ia and ie locales. Thanks to Carmina16 for these. * There are also numerous compose entries added, including: + |^ or ^| for ?, |v or v| for ?, ~~ for ?. Thanks to Antti Savolainen for this. + Allowing use of 'v' for caron, in addition to 'c', so things like vC for ?, vc for ?. Thanks to Benno Schulenberg for this. + Compose sequences LT, lt for '<', and GT, gt for '>' for keyboards where those are difficult to access. Thanks to Jonathan Belsewir for this. - refreshed patches en-locales.diff, p_khmer-compose.diff and p_xlib_skip_ext_env.diff ==== libselinux ==== Subpackages: libselinux1 selinux-tools - install to /usr (boo#1029961) ==== libsepol ==== - install to /usr (boo#1029961) ==== libtirpc ==== Subpackages: libtirpc-netconfig libtirpc3 - install libraries to %{_libdir} (boo#1029961) ==== llvm11 ==== - Add compiler-rt-dont-compile-assembly-files-as-c.patch to fix build failure with newer CMake versions. - Let CMake files in {llvm,clang}X-devel refer to the versioned binaries that come with the package instead of the symlink managed by update-alternatives. (boo#1178513) ==== openssh ==== Subpackages: openssh-clients openssh-common openssh-server - Fix build breakage caused by missing security key objects: + Modify openssh-7.7p1-cavstest-ctr.patch. + Modify openssh-7.7p1-cavstest-kdf.patch. + Add openssh-link-with-sk.patch. - Add openssh-fips-ensure-approved-moduli.patch (bsc#1177939). This ensures only approved DH parameters are used in FIPS mode. - Add openssh-8.1p1-ed25519-use-openssl-rng.patch (bsc#1173799). This uses OpenSSL's RAND_bytes() directly instead of the internal ChaCha20-based implementation to obtain random bytes for Ed25519 curve computations. This is required for FIPS compliance. ==== qpdf ==== Version update (10.0.3 -> 10.0.4) - Update to version 10.0.4 * Fix a handful of integer overflows. ==== tar ==== - prepare usrmerge (boo#1029961) ==== zlib ==== Subpackages: libminizip1 libz1 - Fix hw compression on z15 bsc#1176201 - Add zlib-s390x-z15-fix-hw-compression.patch

1 0

[opensuse-kubic] New Kubic snapshot 20201127 released!
by Richard Brown 29 Nov '20

29 Nov '20

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=kubic&groupid=1&version=T… https://bugzilla.opensuse.org/buglist.cgi?product=openSUSE%20Tumbleweed&com… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: c-ares coreutils cpio dosfstools e2fsprogs filesystem fillup findutils grep (3.5 -> 3.6) gzip kernel-firmware (20201023 -> 20201120) keyutils libselinux libsepol libtirpc openssh tar zlib === Details === ==== c-ares ==== - add BR for pkg-config to get the provides in the devel package ==== coreutils ==== - prepare usrmerge (boo#1029961) ==== cpio ==== - prepare usrmerge (boo#1029961) ==== dosfstools ==== - prepare usrmerge (boo#1029961) ==== e2fsprogs ==== Subpackages: libcom_err2 libext2fs2 - prepare usrmerge (boo#1029961) ==== filesystem ==== - /proc and /sys should be %ghost to allow filesystem package updates in rootless container environments (rh#1548403) ==== fillup ==== - prepare usrmerge (boo#1029961) ==== findutils ==== - prepare usrmerge (boo#1029961) ==== grep ==== Version update (3.5 -> 3.6) - Update to grep 3.6 * The GREP_OPTIONS environment variable no longer affects grep's behavior. * grep's DFA matcher performed an invalid regex transformation that would convert an ERE like a+a+a+ to a+a+, which would make grep a+a+a+ mistakenly match "aa". * grep -P now reports the troublesome input filename upon PCRE execution failure. - werror-return-type.patch: work around gcc bug - prepare usrmerge (boo#1029961) ==== gzip ==== - prepare usrmerge (boo#1029961) ==== kernel-firmware ==== Version update (20201023 -> 20201120) Subpackages: kernel-firmware-all kernel-firmware-amdgpu kernel-firmware-ath10k kernel-firmware-atheros kernel-firmware-bluetooth kernel-firmware-bnx2 kernel-firmware-brcm kernel-firmware-chelsio kernel-firmware-dpaa2 kernel-firmware-i915 kernel-firmware-intel kernel-firmware-iwlwifi kernel-firmware-liquidio kernel-firmware-marvell kernel-firmware-media kernel-firmware-mediatek kernel-firmware-mellanox kernel-firmware-mwifiex kernel-firmware-network kernel-firmware-nfp kernel-firmware-nvidia kernel-firmware-platform kernel-firmware-prestera kernel-firmware-qlogic kernel-firmware-radeon kernel-firmware-realtek kernel-firmware-serial kernel-firmware-sound kernel-firmware-ti kernel-firmware-ueagle kernel-firmware-usb-network ucode-amd - Fix build with older distros due to missing _firmwaredir - Update to version 20201120 (bc9cd0b7b0e9): including AMDGPU update (bsc#1179062) and ath11k addition (bsc#1178274) * linux-firmware: Update AMD SEV firmware * amdgpu: add sienna cichlid firmware for 20.45 * amdgpu: update vega20 firmware for 20.45 * amdgpu: update vega12 firmware for 20.45 * amdgpu: update vega10 firmware for 20.45 * amdgpu: update renoir firmware for 20.45 * amdgpu: update navi14 firmware for 20.45 * amdgpu: update navi12 firmware for 20.45 * amdgpu: update navi10 firmware for 20.45 * amdgpu: update raven2 firmware for 20.45 * amdgpu: update raven firmware for 20.45 * rtlwifi: v88.2 firmware files for RTL8192CU * rtw88: RTL8822C: Update firmware to v9.9.4 * Revert "rtw88: RTL8822C: Update firmware to v9.9.4" * vpdma: Move firmware to ti directory * amdgpu: update picasso VCN firmware * amdgpu: update raven2 VCN firmware * amdgpu: update raven VCN firmware * rtw88: RTL8822C: Update firmware to v9.9.4 * rtl_bt: Update RTL8822C BT(USB I/F) FW to 0x099A_281A * QCA: Update Bluetooth firmware for QCA6390 * qcom : updated venus firmware files for v5.4 * QCA : Fixed BT SSR due to command timeout / IO fatal error * ath11k: QCA6390 hw2.0: add to WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 * ath11k: QCA6390 hw2.0: add board-2.bin * ath11k: IPQ8074 hw2.0: add to WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 * ath11k: IPQ8074 hw2.0: add board-2.bin * ath11k: IPQ6018 hw1.0: add to WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 * ath11k: IPQ6018 hw1.0: add board-2.bin * ath10k: QCA6174 hw3.0: add firmware-sdio-6.bin version WLAN.RMH.4.4.1-00077 * ath10k: QCA9984 hw1.0: update firmware-5.bin to 10.4-3.9.0.2-00131 * ath10k: QCA9888 hw2.0: update firmware-5.bin to 10.4-3.9.0.2-00131 * ath10k: QCA6174 hw3.0: update board-2.bin * ath10k: QCA6174 hw3.0: update firmware-6.bin to WLAN.RM.4.4.1-00157-QCARMSWPZ-1 - ath11k is split into its own subpackage due to its size - Update topics list and aliases accordingly ==== keyutils ==== Subpackages: libkeyutils1 - prepare usrmerge (boo#1029961) ==== libselinux ==== Subpackages: libselinux1 selinux-tools - install to /usr (boo#1029961) ==== libsepol ==== - install to /usr (boo#1029961) ==== libtirpc ==== Subpackages: libtirpc-netconfig libtirpc3 - install libraries to %{_libdir} (boo#1029961) ==== openssh ==== Subpackages: openssh-clients openssh-common openssh-server - Fix build breakage caused by missing security key objects: + Modify openssh-7.7p1-cavstest-ctr.patch. + Modify openssh-7.7p1-cavstest-kdf.patch. + Add openssh-link-with-sk.patch. - Add openssh-fips-ensure-approved-moduli.patch (bsc#1177939). This ensures only approved DH parameters are used in FIPS mode. - Add openssh-8.1p1-ed25519-use-openssl-rng.patch (bsc#1173799). This uses OpenSSL's RAND_bytes() directly instead of the internal ChaCha20-based implementation to obtain random bytes for Ed25519 curve computations. This is required for FIPS compliance. ==== tar ==== - prepare usrmerge (boo#1029961) ==== zlib ==== - Fix hw compression on z15 bsc#1176201 - Add zlib-s390x-z15-fix-hw-compression.patch

1 0

[opensuse-kubic] New MicroOS snapshot 20201125 released!
by Richard Brown 27 Nov '20

27 Nov '20

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=microos&groupid=1&version… https://bugzilla.opensuse.org/buglist.cgi?product=openSUSE%20Tumbleweed&com… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: Mesa (20.2.2 -> 20.2.3) Mesa-drivers (20.2.2 -> 20.2.3) dbus-1 gnome-shell kernel-source (5.9.8 -> 5.9.10) kglobalaccel libqt5-qtbase (5.15.1 -> 5.15.2) libqt5-qtdeclarative (5.15.1 -> 5.15.2) libqt5-qtgraphicaleffects (5.15.1 -> 5.15.2) libqt5-qtlocation (5.15.1 -> 5.15.2) libqt5-qtmultimedia (5.15.1 -> 5.15.2) libqt5-qtquickcontrols (5.15.1 -> 5.15.2) libqt5-qtquickcontrols2 (5.15.1 -> 5.15.2) libqt5-qtscript (5.15.1 -> 5.15.2) libqt5-qtsensors (5.15.1 -> 5.15.2) libqt5-qtspeech (5.15.1 -> 5.15.2) libqt5-qtsvg (5.15.1 -> 5.15.2) libqt5-qttools (5.15.1 -> 5.15.2) libqt5-qtwayland (5.15.1 -> 5.15.2) libqt5-qtwebchannel (5.15.1 -> 5.15.2) libqt5-qtwebengine (5.15.1 -> 5.15.2) libqt5-qtx11extras (5.15.1 -> 5.15.2) libxkbcommon (1.0.1 -> 1.0.3) === Details === ==== Mesa ==== Version update (20.2.2 -> 20.2.3) Subpackages: Mesa-libEGL1 Mesa-libGL1 Mesa-libglapi0 libgbm1 - update to 20.2.3 * third bugfix release for the 20.2 branch ==== Mesa-drivers ==== Version update (20.2.2 -> 20.2.3) Subpackages: Mesa-dri Mesa-gallium - update to 20.2.3 * third bugfix release for the 20.2 branch ==== dbus-1 ==== Subpackages: libdbus-1-3 - prepare usrmerge (boo#1029961) ==== gnome-shell ==== Subpackages: gnome-shell-calendar - Fix crash which can be triggerd with steam or claws mail: https://gitlab.gnome.org/GNOME/gnome-shell/-/commit/98234acd5b48a58c2d112b5… ==== kernel-source ==== Version update (5.9.8 -> 5.9.10) - rpm/kernel-{binary,source}.spec.in: do not create loop symlinks (bsc#1179082) - commit b7c3768 - rpm/kernel-binary.spec.in: avoid using more barewords (bsc#1179014) %split_extra still contained two. - commit d9b4c40 - mac80211: free sta in sta_info_insert_finish() on errors (git-fixes). - commit f42c89a - Linux 5.9.10 (bsc#1012628). - ACPI: GED: fix -Wformat (bsc#1012628). - KVM: x86: clflushopt should be treated as a no-op by emulation (bsc#1012628). - perf/x86/intel/uncore: Fix Add BW copypasta (bsc#1012628). - powerpc/smp: Call rcu_cpu_starting() earlier (bsc#1012628). - selftests/harness: prettify SKIP message whitespace again (bsc#1012628). - can: proc: can_remove_proc(): silence remove_proc_entry warning (bsc#1012628). - mac80211: always wind down STA state (bsc#1012628). - Input: sunkbd - avoid use-after-free in teardown paths (bsc#1012628). - leds: lm3697: Fix out-of-bound access (bsc#1012628). - selftests/powerpc: entry flush test (bsc#1012628). - powerpc: Only include kup-radix.h for 64-bit Book3S (bsc#1012628). - powerpc/64s: flush L1D after user accesses (bsc#1012628). - powerpc/64s: flush L1D on kernel entry (bsc#1012628). - selftests/powerpc: rfi_flush: disable entry flush if present (bsc#1012628). - commit 18ece1c - kernel-source.spec: Fix build with rpm 4.16 (boo#1179015). RPM_BUILD_ROOT is cleared before %%install. Do the unpack into RPM_BUILD_ROOT in %%install - commit 13bd533 - rpm/kernel-binary.spec.in: avoid using barewords (bsc#1179014) Author: Dominique Leuenberger <dimstar(a)opensuse.org> - commit 21f8205 - rpm/mkspec: do not build kernel-obs-build on x86_32 We want to use 64bit kernel due to various bugs (bsc#1178762 to name one). There is: ExportFilter: ^kernel-obs-build.*\.x86_64.rpm$ . i586 in Factory's prjconf now. No other actively maintained distro (i.e. merging packaging branch) builds a x86_32 kernel, hence pushing to packaging directly. - commit 8099b4b - RDMA/srpt: Fix typo in srpt_unregister_mad_agent docstring (git-fixes). - arm64: kexec_file: Fix sparse warning (git-fixes). - commit f76e598 - Linux 5.9.9 (bsc#1012628). - drm/i915: Hold onto an explicit ref to i915_vma_work.pinned (bsc#1012628). - drm/i915/gem: Flush coherency domains on first set-domain-ioctl (bsc#1012628). - mm: memcg: link page counters to root if use_hierarchy is false (bsc#1012628). - nbd: don't update block size after device is started (bsc#1012628). - KVM: arm64: Force PTE mapping on fault resulting in a device mapping (bsc#1012628). - xfrm: interface: fix the priorities for ipip and ipv6 tunnels (bsc#1012628). - ASoC: Intel: kbl_rt5663_max98927: Fix kabylake_ssp_fixup function (bsc#1012628). - genirq: Let GENERIC_IRQ_IPI select IRQ_DOMAIN_HIERARCHY (bsc#1012628). - hv_balloon: disable warning when floor reached (bsc#1012628). - net: xfrm: fix a race condition during allocing spi (bsc#1012628). - ASoC: codecs: wsa881x: add missing stream rates and format (bsc#1012628). - spi: imx: fix runtime pm support for !CONFIG_PM (bsc#1012628). - irqchip/sifive-plic: Fix broken irq_set_affinity() callback (bsc#1012628). - kunit: Fix kunit.py --raw_output option (bsc#1012628). - kunit: Don't fail test suites if one of them is empty (bsc#1012628). - usb: gadget: fsl: fix null pointer checking (bsc#1012628). - selftests: filter kselftest headers from command in lib.mk (bsc#1012628). - ASoC: codecs: wcd934x: Set digital gain range correctly (bsc#1012628). - ASoC: codecs: wcd9335: Set digital gain range correctly (bsc#1012628). - mtd: spi-nor: Fix address width on flash chips > 16MB (bsc#1012628). - xfs: set xefi_discard when creating a deferred agfl free log intent item (bsc#1012628). - mac80211: don't require VHT elements for HE on 2.4 GHz (bsc#1012628). - netfilter: nftables: fix netlink report logic in flowtable and genid (bsc#1012628). - netfilter: use actual socket sk rather than skb sk when routing harder (bsc#1012628). - netfilter: nf_tables: missing validation from the abort path (bsc#1012628). - netfilter: ipset: Update byte and packet counters regardless of whether they match (bsc#1012628). - irqchip/sifive-plic: Fix chip_data access within a hierarchy (bsc#1012628). - powerpc/eeh_cache: Fix a possible debugfs deadlock (bsc#1012628). - drm/vc4: bo: Add a managed action to cleanup the cache (bsc#1012628). - IB/srpt: Fix memory leak in srpt_add_one (bsc#1012628). - mm: memcontrol: correct the NR_ANON_THPS counter of hierarchical memcg (bsc#1012628). - drm/panfrost: rename error labels in device_init (bsc#1012628). - drm/panfrost: move devfreq_init()/fini() in device (bsc#1012628). - drm/panfrost: Fix module unload (bsc#1012628). - perf trace: Fix segfault when trying to trace events by cgroup (bsc#1012628). - perf tools: Add missing swap for ino_generation (bsc#1012628). - perf tools: Add missing swap for cgroup events (bsc#1012628). - ALSA: hda: prevent undefined shift in snd_hdac_ext_bus_get_link() (bsc#1012628). - iommu/vt-d: Fix sid not set issue in intel_svm_bind_gpasid() (bsc#1012628). - iommu/vt-d: Fix a bug for PDP check in prq_event_thread (bsc#1012628). - afs: Fix warning due to unadvanced marshalling pointer (bsc#1012628). - afs: Fix incorrect freeing of the ACL passed to the YFS ACL store op (bsc#1012628). - vfio/pci: Implement ioeventfd thread handler for contended memory lock (bsc#1012628). - can: rx-offload: don't call kfree_skb() from IRQ context (bsc#1012628). - can: dev: can_get_echo_skb(): prevent call to kfree_skb() in hard IRQ context (bsc#1012628). - can: dev: __can_get_echo_skb(): fix real payload length return value for RTR frames (bsc#1012628). - can: can_create_echo_skb(): fix echo skb generation: always use skb_clone() (bsc#1012628). - can: j1939: swap addr and pgn in the send example (bsc#1012628). - can: j1939: j1939_sk_bind(): return failure if netdev is down (bsc#1012628). - can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path (bsc#1012628). - can: xilinx_can: handle failure cases of pm_runtime_get_sync (bsc#1012628). - can: peak_usb: add range checking in decode operations (bsc#1012628). - can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping (bsc#1012628). - can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on (bsc#1012628). - can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A (bsc#1012628). - can: flexcan: flexcan_remove(): disable wakeup completely (bsc#1012628). - xfs: flush new eof page on truncate to avoid post-eof corruption (bsc#1012628). - xfs: fix missing CoW blocks writeback conversion retry (bsc#1012628). - xfs: fix scrub flagging rtinherit even if there is no rt device (bsc#1012628). - io_uring: ensure consistent view of original task ->mm from SQPOLL (bsc#1012628). - spi: fsl-dspi: fix wrong pointer in suspend/resume (bsc#1012628). - PCI: mvebu: Fix duplicate resource requests (bsc#1012628). - ceph: check session state after bumping session->s_seq (bsc#1012628). - selftests: core: use SKIP instead of XFAIL in close_range_test.c (bsc#1012628). - selftests: clone3: use SKIP instead of XFAIL (bsc#1012628). - selftests: binderfs: use SKIP instead of XFAIL (bsc#1012628). - x86/speculation: Allow IBPB to be conditionally enabled on CPUs with always-on STIBP (bsc#1012628). - kbuild: explicitly specify the build id style (bsc#1012628). - RISC-V: Fix the VDSO symbol generaton for binutils-2.35+ (bsc#1012628). - USB: apple-mfi-fastcharge: fix reference leak in apple_mfi_fc_set_property (bsc#1012628). - tpm: efi: Don't create binary_bios_measurements file for an empty log (bsc#1012628). - KVM: arm64: ARM_SMCCC_ARCH_WORKAROUND_1 doesn't return SMCCC_RET_NOT_REQUIRED (bsc#1012628). - ath9k_htc: Use appropriate rs_datalen type (bsc#1012628). - scsi: ufs: Fix missing brace warning for old compilers (bsc#1012628). - ASoC: mediatek: mt8183-da7219: fix DAPM paths for rt1015 (bsc#1012628). - ASoC: qcom: sdm845: set driver name correctly (bsc#1012628). - ASoC: cs42l51: manage mclk shutdown delay (bsc#1012628). - ASoC: SOF: loader: handle all SOF_IPC_EXT types (bsc#1012628). - usb: dwc3: pci: add support for the Intel Alder Lake-S (bsc#1012628). - opp: Reduce the size of critical section in _opp_table_kref_release() (bsc#1012628). - usb: gadget: goku_udc: fix potential crashes in probe (bsc#1012628). - usb: raw-gadget: fix memory leak in gadget_setup (bsc#1012628). - selftests/ftrace: check for do_sys_openat2 in user-memory test (bsc#1012628). - selftests: pidfd: fix compilation errors due to wait.h (bsc#1012628). - ALSA: hda: Separate runtime and system suspend (bsc#1012628). - ALSA: hda: Reinstate runtime_allow() for all hda controllers (bsc#1012628). - x86/boot/compressed/64: Introduce sev_status (bsc#1012628). - gfs2: Free rd_bits later in gfs2_clear_rgrpd to fix use-after-free (bsc#1012628). - gfs2: Add missing truncate_inode_pages_final for sd_aspace (bsc#1012628). - gfs2: check for live vs. read-only file system in gfs2_fitrim (bsc#1012628). - scsi: hpsa: Fix memory leak in hpsa_init_one() (bsc#1012628). - drm/amdgpu: perform srbm soft reset always on SDMA resume (bsc#1012628). - drm/amd/pm: correct the baco reset sequence for CI ASICs (bsc#1012628). - drm/amd/pm: perform SMC reset on suspend/hibernation (bsc#1012628). - drm/amd/pm: do not use ixFEATURE_STATUS for checking smc running (bsc#1012628). - mac80211: fix use of skb payload instead of header (bsc#1012628). - cfg80211: initialize wdev data earlier (bsc#1012628). - cfg80211: regulatory: Fix inconsistent format argument (bsc#1012628). - wireguard: selftests: check that route_me_harder packets use the right sk (bsc#1012628). - tracing: Fix the checking of stackidx in __ftrace_trace_stack (bsc#1012628). - Revert "nvme-pci: remove last_sq_tail" (bsc#1012628). - ARC: [plat-hsdk] Remap CCMs super early in asm boot trampoline (bsc#1012628). - scsi: scsi_dh_alua: Avoid crash during alua_bus_detach() (bsc#1012628). - scsi: mpt3sas: Fix timeouts observed while reenabling IRQ (bsc#1012628). - nvme: introduce nvme_sync_io_queues (bsc#1012628). - nvme-rdma: avoid race between time out and tear down (bsc#1012628). - nvme-tcp: avoid race between time out and tear down (bsc#1012628). - nvme-rdma: avoid repeated request completion (bsc#1012628). - nvme-tcp: avoid repeated request completion (bsc#1012628). - iommu/amd: Increase interrupt remapping table limit to 512 entries (bsc#1012628). - s390/smp: move rcu_cpu_starting() earlier (bsc#1012628). - vfio: platform: fix reference leak in vfio_platform_open (bsc#1012628). - vfio/pci: Bypass IGD init in case of -ENODEV (bsc#1012628). - i2c: mediatek: move dma reset before i2c reset (bsc#1012628). - amd/amdgpu: Disable VCN DPG mode for Picasso (bsc#1012628). - iomap: clean up writeback state logic on writepage error (bsc#1012628). - selftests: proc: fix warning: _GNU_SOURCE redefined (bsc#1012628). - arm64: kexec_file: try more regions if loading segments fails (bsc#1012628). - riscv: Set text_offset correctly for M-Mode (bsc#1012628). - i2c: sh_mobile: implement atomic transfers (bsc#1012628). - i2c: designware: call i2c_dw_read_clear_intrbits_slave() once (bsc#1012628). - i2c: designware: slave should do WRITE_REQUESTED before WRITE_RECEIVED (bsc#1012628). - tpm_tis: Disable interrupts on ThinkPad T490s (bsc#1012628). - mfd: sprd: Add wakeup capability for PMIC IRQ (bsc#1012628). - pinctrl: intel: Fix 2 kOhm bias which is 833 Ohm (bsc#1012628). - pinctrl: intel: Set default bias in case no particular value given (bsc#1012628). - gpio: aspeed: fix ast2600 bank properties (bsc#1012628). - ARM: 9019/1: kprobes: Avoid fortify_panic() when copying optprobe template (bsc#1012628). - bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE (bsc#1012628). - libbpf, hashmap: Fix undefined behavior in hash_bits (bsc#1012628). - pinctrl: mcp23s08: Use full chunk of memory for regmap configuration (bsc#1012628). - pinctrl: aspeed: Fix GPI only function problem (bsc#1012628). - net/mlx5e: Fix modify header actions memory leak (bsc#1012628). - net/mlx5e: Protect encap route dev from concurrent release (bsc#1012628). - net/mlx5e: Use spin_lock_bh for async_icosq_lock (bsc#1012628). - net/mlx5: Fix deletion of duplicate rules (bsc#1012628). - net/mlx5: E-switch, Avoid extack error log for disabled vport (bsc#1012628). - net/mlx5e: Fix VXLAN synchronization after function reload (bsc#1012628). - net/mlx5e: Fix incorrect access of RCU-protected xdp_prog (bsc#1012628). - SUNRPC: Fix general protection fault in trace_rpc_xdr_overflow() (bsc#1012628). - NFSD: Fix use-after-free warning when doing inter-server copy (bsc#1012628). - NFSD: fix missing refcount in nfsd4_copy by nfsd4_do_async_copy (bsc#1012628). - tools/bpftool: Fix attaching flow dissector (bsc#1012628). - bpf: Zero-fill re-used per-cpu map element (bsc#1012628). - r8169: fix potential skb double free in an error path (bsc#1012628). - r8169: disable hw csum for short packets on all chip versions (bsc#1012628). - pinctrl: qcom: Move clearing pending IRQ to .irq_request_resources callback (bsc#1012628). - pinctrl: qcom: sm8250: Specify PDC map (bsc#1012628). - nbd: fix a block_device refcount leak in nbd_release (bsc#1012628). - selftest: fix flower terse dump tests (bsc#1012628). - i40e: Fix MAC address setting for a VF via Host/VM (bsc#1012628). - igc: Fix returning wrong statistics (bsc#1012628). - lan743x: correctly handle chips with internal PHY (bsc#1012628). - net: phy: realtek: support paged operations on RTL8201CP (bsc#1012628). - xfs: fix flags argument to rmap lookup when converting shared file rmaps (bsc#1012628). - xfs: set the unwritten bit in rmap lookup flags in xchk_bmap_get_rmapextents (bsc#1012628). - xfs: fix rmap key and record comparison functions (bsc#1012628). - xfs: fix brainos in the refcount scrubber's rmap fragment processor (bsc#1012628). - lan743x: fix "BUG: invalid wait context" when setting rx mode (bsc#1012628). - xfs: fix a missing unlock on error in xfs_fs_map_blocks (bsc#1012628). - of/address: Fix of_node memory leak in of_dma_is_coherent (bsc#1012628). - ch_ktls: Update cheksum information (bsc#1012628). - ch_ktls: tcb update fails sometimes (bsc#1012628). - cosa: Add missing kfree in error path of cosa_write (bsc#1012628). - hwmon: (applesmc) Re-work SMC comms (bsc#1012628). - NFS: Fix listxattr receive buffer size (bsc#1012628). - vrf: Fix fast path output packet handling with async Netfilter rules (bsc#1012628). - lan743x: fix use of uninitialized variable (bsc#1012628). - arm64/mm: Validate hotplug range before creating linear mapping (bsc#1012628). - kernel/watchdog: fix watchdog_allowed_mask not used warning (bsc#1012628). - mm: memcontrol: fix missing wakeup polling thread (bsc#1012628). - afs: Fix afs_write_end() when called with copied == 0 [ver #3] (bsc#1012628). - perf: Fix get_recursion_context() (bsc#1012628). - nvme: factor out a nvme_configure_metadata helper (bsc#1012628). - nvme: freeze the queue over ->lba_shift updates (bsc#1012628). - nvme: fix incorrect behavior when BLKROSET is called by the user (bsc#1012628). - perf: Simplify group_sched_in() (bsc#1012628). - perf: Fix event multiplexing for exclusive groups (bsc#1012628). - firmware: xilinx: fix out-of-bounds access (bsc#1012628). - erofs: fix setting up pcluster for temporary pages (bsc#1012628). - erofs: derive atime instead of leaving it empty (bsc#1012628). - ext4: correctly report "not supported" for {usr,grp}jquota when !CONFIG_QUOTA (bsc#1012628). - ext4: unlock xattr_sem properly in ext4_inline_data_truncate() (bsc#1012628). - btrfs: fix potential overflow in cluster_pages_for_defrag on 32bit arch (bsc#1012628). - btrfs: ref-verify: fix memory leak in btrfs_ref_tree_mod (bsc#1012628). - btrfs: fix min reserved size calculation in merge_reloc_root (bsc#1012628). - btrfs: dev-replace: fail mount if we don't have replace item with target device (bsc#1012628). - KVM: arm64: Don't hide ID registers from userspace (bsc#1012628). - speakup: Fix var_id_t values and thus keymap (bsc#1012628). - speakup ttyio: Do not schedule() in ttyio_in_nowait (bsc#1012628). - speakup: Fix clearing selection in safe context (bsc#1012628). - thunderbolt: Fix memory leak if ida_simple_get() fails in enumerate_services() (bsc#1012628). - thunderbolt: Add the missed ida_simple_remove() in ring_request_msix() (bsc#1012628). - uio: Fix use-after-free in uio_unregister_device() (bsc#1012628). - Revert "usb: musb: convert to devm_platform_ioremap_resource_byname" (bsc#1012628). - usb: cdc-acm: Add DISABLE_ECHO for Renesas USB Download mode (bsc#1012628). - usb: typec: ucsi: Report power supply changes (bsc#1012628). - xhci: hisilicon: fix refercence leak in xhci_histb_probe (bsc#1012628). - virtio: virtio_console: fix DMA memory allocation for rproc serial (bsc#1012628). - mei: protect mei_cl_mtu from null dereference (bsc#1012628). - futex: Don't enable IRQs unconditionally in put_pi_state() (bsc#1012628). - jbd2: fix up sparse warnings in checkpoint code (bsc#1012628). - bootconfig: Extend the magic check range to the preceding 3 bytes (bsc#1012628). - mm/compaction: count pages and stop correctly during page isolation (bsc#1012628). - mm/compaction: stop isolation if too many pages are isolated and we have pages to migrate (bsc#1012628). - mm/slub: fix panic in slab_alloc_node() (bsc#1012628). - mm/vmscan: fix NR_ISOLATED_FILE corruption on 64-bit (bsc#1012628). - mm/gup: use unpin_user_pages() in __gup_longterm_locked() (bsc#1012628). - Revert "kernel/reboot.c: convert simple_strtoul to kstrtoint" (bsc#1012628). - reboot: fix overflow parsing reboot cpu number (bsc#1012628). - hugetlbfs: fix anon huge page migration race (bsc#1012628). - ocfs2: initialize ip_next_orphan (bsc#1012628). - hwmon: (amd_energy) modify the visibility of the counters (bsc#1012628). - selinux: Fix error return code in sel_ib_pkey_sid_slow() (bsc#1012628). - io_uring: round-up cq size before comparing with rounded sq size (bsc#1012628). - gpio: sifive: Fix SiFive gpio probe (bsc#1012628). - gpio: pcie-idio-24: Fix irq mask when masking (bsc#1012628). - gpio: pcie-idio-24: Fix IRQ Enable Register value (bsc#1012628). - gpio: pcie-idio-24: Enable PEX8311 interrupts (bsc#1012628). - mmc: sdhci-of-esdhc: Handle pulse width detection erratum for more SoCs (bsc#1012628). - mmc: renesas_sdhi_core: Add missing tmio_mmc_host_free() at remove (bsc#1012628). - don't dump the threads that had been already exiting when zapped (bsc#1012628). - drm/amd/display: Add missing pflip irq (bsc#1012628). - drm/i915: Correctly set SFC capability for video engines (bsc#1012628). - drm/gma500: Fix out-of-bounds access to struct drm_device.vblank[] (bsc#1012628). - NFSv4.2: fix failure to unregister shrinker (bsc#1012628). - pinctrl: amd: use higher precision for 512 RtcClk (bsc#1012628). - pinctrl: amd: fix incorrect way to disable debounce filter (bsc#1012628). - swiotlb: fix "x86: Don't panic if can not alloc buffer for swiotlb" (bsc#1012628). - cpufreq: Introduce governor flags (bsc#1012628). - cpufreq: Introduce CPUFREQ_GOV_STRICT_TARGET (bsc#1012628). - cpufreq: Add strict_target to struct cpufreq_policy (bsc#1012628). - cpufreq: intel_pstate: Take CPUFREQ_GOV_STRICT_TARGET into account (bsc#1012628). - ethtool: netlink: add missing netdev_features_change() call (bsc#1012628). - IPv6: Set SIT tunnel hard_header_len to zero (bsc#1012628). - net/af_iucv: fix null pointer dereference on shutdown (bsc#1012628). - net: udp: fix IP header access and skb lookup on Fast/frag0 UDP GRO (bsc#1012628). - net: udp: fix UDP header access on Fast/frag0 UDP GRO (bsc#1012628). - net: Update window_clamp if SOCK_RCVBUF is set (bsc#1012628). - net/x25: Fix null-ptr-deref in x25_connect (bsc#1012628). - tipc: fix memory leak in tipc_topsrv_start() (bsc#1012628). - devlink: Avoid overwriting port attributes of registered port (bsc#1012628). - mptcp: provide rmem[0] limit (bsc#1012628). - tunnels: Fix off-by-one in lower MTU bounds for ICMP/ICMPv6 replies (bsc#1012628). - powerpc/603: Always fault when _PAGE_ACCESSED is not set (bsc#1012628). - null_blk: Fix scheduling in atomic with zoned mode (bsc#1012628). - perf scripting python: Avoid declaring function pointers with a visibility attribute (bsc#1012628). - coresight: etm: perf: Sink selection using sysfs is deprecated (bsc#1012628). - coresight: Fix uninitialised pointer bug in etm_setup_aux() (bsc#1012628). - Convert trailing spaces and periods in path components (bsc#1012628). - commit 21e5163 - PCI: Always enable ACS even if no ACS Capability (bsc#1178211). - commit a40af1e - loop: Fix occasional uevent drop (bsc#1177900). - block: add a return value to set_capacity_revalidate_and_notify (bsc#1177900). - commit 98395e1 - btrfs: qgroup: don't commit transaction when we already hold the handle (bsc#1178634). Update upstream status and take the upstream version. - commit 60a737e ==== kglobalaccel ==== Subpackages: kglobalaccel5 libKF5GlobalAccel5 libKF5GlobalAccelPrivate5 - Add patch to workaround kglobalaccel breaking persistently after unclean logout (kde#429415, boo#1179033) * 0001-Revert-systemd-dbus-activation.patch ==== libqt5-qtbase ==== Version update (5.15.1 -> 5.15.2) Subpackages: libQt5Concurrent5 libQt5Core5 libQt5DBus5 libQt5Gui5 libQt5Network5 libQt5OpenGL5 libQt5PrintSupport5 libQt5Sql5 libQt5Sql5-sqlite libQt5Test5 libQt5Widgets5 libQt5Xml5 - Update to 5.15.2: * New bugfix release * For more details please see: http://code.qt.io/cgit/qt/qtbase.git/plain/dist/changes-5.15.2/?h=5.15.2 - Drop patches, now upstream: * 0001-Revert-Emit-QScreen-availableG-g-eometryChanged-on-l.patch - Pass -confirm-license option, drop duplicates - BuildRequire xcb-util - Add patch to avoid coredumps with missing display: * 0001-Avoid-SIGABRT-on-platform-plugin-initialization-fail.patch ==== libqt5-qtdeclarative ==== Version update (5.15.1 -> 5.15.2) - Update to 5.15.2: * New bugfix release * For more details please see: http://code.qt.io/cgit/qt/qtdeclarative.git/plain/dist/changes-5.15.2/?h=5.… - Refresh qtdeclarative-5.15.0-FixMaxXMaxYExtent.patch ==== libqt5-qtgraphicaleffects ==== Version update (5.15.1 -> 5.15.2) - Update to 5.15.2: * New bugfix release * For more details please see: http://code.qt.io/cgit/qt/qtgraphicaleffects.git/plain/dist/changes-5.15.2/… ==== libqt5-qtlocation ==== Version update (5.15.1 -> 5.15.2) - Update to 5.15.2: * New bugfix release * For more details please see: http://code.qt.io/cgit/qt/qtlocation.git/plain/dist/changes-5.15.2/?h=5.15.2 ==== libqt5-qtmultimedia ==== Version update (5.15.1 -> 5.15.2) - Update to 5.15.2: * New bugfix release * For more details please see: http://code.qt.io/cgit/qt/qtmultimedia.git/plain/dist/changes-5.15.2/?h=5.1… ==== libqt5-qtquickcontrols ==== Version update (5.15.1 -> 5.15.2) - Update to 5.15.2: * New bugfix release * For more details please see: http://code.qt.io/cgit/qt/qtquickcontrols.git/plain/dist/changes-5.15.2/?h=… ==== libqt5-qtquickcontrols2 ==== Version update (5.15.1 -> 5.15.2) Subpackages: libQt5QuickControls2-5 libQt5QuickTemplates2-5 - Update to 5.15.2: * New bugfix release * For more details please see: http://code.qt.io/cgit/qt/qtquickcontrols2.git/plain/dist/changes-5.15.2/?h… ==== libqt5-qtscript ==== Version update (5.15.1 -> 5.15.2) - Update to 5.15.2: * New bugfix release * For more details please see: http://code.qt.io/cgit/qt/qtscript.git/plain/dist/changes-5.15.2/?h=5.15.2 ==== libqt5-qtsensors ==== Version update (5.15.1 -> 5.15.2) - Update to 5.15.2: * New bugfix release * For more details please see: http://code.qt.io/cgit/qt/qtsensors.git/plain/dist/changes-5.15.2/?h=5.15.2 ==== libqt5-qtspeech ==== Version update (5.15.1 -> 5.15.2) - Update to 5.15.2: * New bugfix release * For more details please see: http://code.qt.io/cgit/qt/qtspeech.git/plain/dist/changes-5.15.2/?h=5.15.2 ==== libqt5-qtsvg ==== Version update (5.15.1 -> 5.15.2) - Update to 5.15.2: * New bugfix release * For more details please see: http://code.qt.io/cgit/qt/qtsvg.git/plain/dist/changes-5.15.2/?h=5.15.2 ==== libqt5-qttools ==== Version update (5.15.1 -> 5.15.2) Subpackages: libqt5-qdbus libqt5-qtpaths - Update to 5.15.2: * New bugfix release * For more details please see: http://code.qt.io/cgit/qt/qttools.git/plain/dist/changes-5.15.2/?h=5.15.2 - Fix the clang requirement for Leap 15.2. The clang headers are also in the libclang<major version> package. - Use the %pkg_version macro available since Leap 15 ==== libqt5-qtwayland ==== Version update (5.15.1 -> 5.15.2) Subpackages: libQt5WaylandClient5 libQt5WaylandCompositor5 - Update to 5.15.2: * New bugfix release * For more details please see: http://code.qt.io/cgit/qt/qtwayland.git/plain/dist/changes-5.15.2/?h=5.15.2 ==== libqt5-qtwebchannel ==== Version update (5.15.1 -> 5.15.2) - Update to 5.15.2: * New bugfix release * For more details please see: http://code.qt.io/cgit/qt/qtwebchannel.git/plain/dist/changes-5.15.2/?h=5.1… ==== libqt5-qtwebengine ==== Version update (5.15.1 -> 5.15.2) - Update to 5.15.2: * New bugfix release * For more details please see: http://code.qt.io/cgit/qt/qtwebengine.git/plain/dist/changes-5.15.2/?h=5.15… ==== libqt5-qtx11extras ==== Version update (5.15.1 -> 5.15.2) - Update to 5.15.2: * New bugfix release * For more details please see: http://code.qt.io/cgit/qt/qtx11extras.git/plain/dist/changes-5.15.2/?h=5.15… ==== libxkbcommon ==== Version update (1.0.1 -> 1.0.3) Subpackages: libxkbcommon-x11-0 libxkbcommon0 - Update to release 1.0.3 * Fix (hopefully) a segfault in xkb_x11_keymap_new_from_device() in some unclear situation (bug introduced in 1.0.2). * Fix keymaps created with xkb_x11_keymap_new_from_device() do not have level names (bug introduced in 0.8.0). - Update to release 1.0.2 * Fix a bug where a keysym that cannot be resolved in a keymap gets compiled to a garbage keysym. Now it is set to XKB_KEY_NoSymbol instead. * Improve the speed of xkb_x11_keymap_new_from_device() on repeated calls in the same xkb_context().

1 0

[opensuse-kubic] New Kubic snapshot 20201125 released!
by Richard Brown 27 Nov '20

27 Nov '20

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=kubic&groupid=1&version=T… https://bugzilla.opensuse.org/buglist.cgi?product=openSUSE%20Tumbleweed&com… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: dbus-1 kernel-source (5.9.8 -> 5.9.10) kured (1.5.0 -> 1.5.1) salt === Details === ==== dbus-1 ==== Subpackages: libdbus-1-3 - prepare usrmerge (boo#1029961) ==== kernel-source ==== Version update (5.9.8 -> 5.9.10) - rpm/kernel-{binary,source}.spec.in: do not create loop symlinks (bsc#1179082) - commit b7c3768 - rpm/kernel-binary.spec.in: avoid using more barewords (bsc#1179014) %split_extra still contained two. - commit d9b4c40 - mac80211: free sta in sta_info_insert_finish() on errors (git-fixes). - commit f42c89a - Linux 5.9.10 (bsc#1012628). - ACPI: GED: fix -Wformat (bsc#1012628). - KVM: x86: clflushopt should be treated as a no-op by emulation (bsc#1012628). - perf/x86/intel/uncore: Fix Add BW copypasta (bsc#1012628). - powerpc/smp: Call rcu_cpu_starting() earlier (bsc#1012628). - selftests/harness: prettify SKIP message whitespace again (bsc#1012628). - can: proc: can_remove_proc(): silence remove_proc_entry warning (bsc#1012628). - mac80211: always wind down STA state (bsc#1012628). - Input: sunkbd - avoid use-after-free in teardown paths (bsc#1012628). - leds: lm3697: Fix out-of-bound access (bsc#1012628). - selftests/powerpc: entry flush test (bsc#1012628). - powerpc: Only include kup-radix.h for 64-bit Book3S (bsc#1012628). - powerpc/64s: flush L1D after user accesses (bsc#1012628). - powerpc/64s: flush L1D on kernel entry (bsc#1012628). - selftests/powerpc: rfi_flush: disable entry flush if present (bsc#1012628). - commit 18ece1c - kernel-source.spec: Fix build with rpm 4.16 (boo#1179015). RPM_BUILD_ROOT is cleared before %%install. Do the unpack into RPM_BUILD_ROOT in %%install - commit 13bd533 - rpm/kernel-binary.spec.in: avoid using barewords (bsc#1179014) Author: Dominique Leuenberger <dimstar(a)opensuse.org> - commit 21f8205 - rpm/mkspec: do not build kernel-obs-build on x86_32 We want to use 64bit kernel due to various bugs (bsc#1178762 to name one). There is: ExportFilter: ^kernel-obs-build.*\.x86_64.rpm$ . i586 in Factory's prjconf now. No other actively maintained distro (i.e. merging packaging branch) builds a x86_32 kernel, hence pushing to packaging directly. - commit 8099b4b - RDMA/srpt: Fix typo in srpt_unregister_mad_agent docstring (git-fixes). - arm64: kexec_file: Fix sparse warning (git-fixes). - commit f76e598 - Linux 5.9.9 (bsc#1012628). - drm/i915: Hold onto an explicit ref to i915_vma_work.pinned (bsc#1012628). - drm/i915/gem: Flush coherency domains on first set-domain-ioctl (bsc#1012628). - mm: memcg: link page counters to root if use_hierarchy is false (bsc#1012628). - nbd: don't update block size after device is started (bsc#1012628). - KVM: arm64: Force PTE mapping on fault resulting in a device mapping (bsc#1012628). - xfrm: interface: fix the priorities for ipip and ipv6 tunnels (bsc#1012628). - ASoC: Intel: kbl_rt5663_max98927: Fix kabylake_ssp_fixup function (bsc#1012628). - genirq: Let GENERIC_IRQ_IPI select IRQ_DOMAIN_HIERARCHY (bsc#1012628). - hv_balloon: disable warning when floor reached (bsc#1012628). - net: xfrm: fix a race condition during allocing spi (bsc#1012628). - ASoC: codecs: wsa881x: add missing stream rates and format (bsc#1012628). - spi: imx: fix runtime pm support for !CONFIG_PM (bsc#1012628). - irqchip/sifive-plic: Fix broken irq_set_affinity() callback (bsc#1012628). - kunit: Fix kunit.py --raw_output option (bsc#1012628). - kunit: Don't fail test suites if one of them is empty (bsc#1012628). - usb: gadget: fsl: fix null pointer checking (bsc#1012628). - selftests: filter kselftest headers from command in lib.mk (bsc#1012628). - ASoC: codecs: wcd934x: Set digital gain range correctly (bsc#1012628). - ASoC: codecs: wcd9335: Set digital gain range correctly (bsc#1012628). - mtd: spi-nor: Fix address width on flash chips > 16MB (bsc#1012628). - xfs: set xefi_discard when creating a deferred agfl free log intent item (bsc#1012628). - mac80211: don't require VHT elements for HE on 2.4 GHz (bsc#1012628). - netfilter: nftables: fix netlink report logic in flowtable and genid (bsc#1012628). - netfilter: use actual socket sk rather than skb sk when routing harder (bsc#1012628). - netfilter: nf_tables: missing validation from the abort path (bsc#1012628). - netfilter: ipset: Update byte and packet counters regardless of whether they match (bsc#1012628). - irqchip/sifive-plic: Fix chip_data access within a hierarchy (bsc#1012628). - powerpc/eeh_cache: Fix a possible debugfs deadlock (bsc#1012628). - drm/vc4: bo: Add a managed action to cleanup the cache (bsc#1012628). - IB/srpt: Fix memory leak in srpt_add_one (bsc#1012628). - mm: memcontrol: correct the NR_ANON_THPS counter of hierarchical memcg (bsc#1012628). - drm/panfrost: rename error labels in device_init (bsc#1012628). - drm/panfrost: move devfreq_init()/fini() in device (bsc#1012628). - drm/panfrost: Fix module unload (bsc#1012628). - perf trace: Fix segfault when trying to trace events by cgroup (bsc#1012628). - perf tools: Add missing swap for ino_generation (bsc#1012628). - perf tools: Add missing swap for cgroup events (bsc#1012628). - ALSA: hda: prevent undefined shift in snd_hdac_ext_bus_get_link() (bsc#1012628). - iommu/vt-d: Fix sid not set issue in intel_svm_bind_gpasid() (bsc#1012628). - iommu/vt-d: Fix a bug for PDP check in prq_event_thread (bsc#1012628). - afs: Fix warning due to unadvanced marshalling pointer (bsc#1012628). - afs: Fix incorrect freeing of the ACL passed to the YFS ACL store op (bsc#1012628). - vfio/pci: Implement ioeventfd thread handler for contended memory lock (bsc#1012628). - can: rx-offload: don't call kfree_skb() from IRQ context (bsc#1012628). - can: dev: can_get_echo_skb(): prevent call to kfree_skb() in hard IRQ context (bsc#1012628). - can: dev: __can_get_echo_skb(): fix real payload length return value for RTR frames (bsc#1012628). - can: can_create_echo_skb(): fix echo skb generation: always use skb_clone() (bsc#1012628). - can: j1939: swap addr and pgn in the send example (bsc#1012628). - can: j1939: j1939_sk_bind(): return failure if netdev is down (bsc#1012628). - can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path (bsc#1012628). - can: xilinx_can: handle failure cases of pm_runtime_get_sync (bsc#1012628). - can: peak_usb: add range checking in decode operations (bsc#1012628). - can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping (bsc#1012628). - can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on (bsc#1012628). - can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A (bsc#1012628). - can: flexcan: flexcan_remove(): disable wakeup completely (bsc#1012628). - xfs: flush new eof page on truncate to avoid post-eof corruption (bsc#1012628). - xfs: fix missing CoW blocks writeback conversion retry (bsc#1012628). - xfs: fix scrub flagging rtinherit even if there is no rt device (bsc#1012628). - io_uring: ensure consistent view of original task ->mm from SQPOLL (bsc#1012628). - spi: fsl-dspi: fix wrong pointer in suspend/resume (bsc#1012628). - PCI: mvebu: Fix duplicate resource requests (bsc#1012628). - ceph: check session state after bumping session->s_seq (bsc#1012628). - selftests: core: use SKIP instead of XFAIL in close_range_test.c (bsc#1012628). - selftests: clone3: use SKIP instead of XFAIL (bsc#1012628). - selftests: binderfs: use SKIP instead of XFAIL (bsc#1012628). - x86/speculation: Allow IBPB to be conditionally enabled on CPUs with always-on STIBP (bsc#1012628). - kbuild: explicitly specify the build id style (bsc#1012628). - RISC-V: Fix the VDSO symbol generaton for binutils-2.35+ (bsc#1012628). - USB: apple-mfi-fastcharge: fix reference leak in apple_mfi_fc_set_property (bsc#1012628). - tpm: efi: Don't create binary_bios_measurements file for an empty log (bsc#1012628). - KVM: arm64: ARM_SMCCC_ARCH_WORKAROUND_1 doesn't return SMCCC_RET_NOT_REQUIRED (bsc#1012628). - ath9k_htc: Use appropriate rs_datalen type (bsc#1012628). - scsi: ufs: Fix missing brace warning for old compilers (bsc#1012628). - ASoC: mediatek: mt8183-da7219: fix DAPM paths for rt1015 (bsc#1012628). - ASoC: qcom: sdm845: set driver name correctly (bsc#1012628). - ASoC: cs42l51: manage mclk shutdown delay (bsc#1012628). - ASoC: SOF: loader: handle all SOF_IPC_EXT types (bsc#1012628). - usb: dwc3: pci: add support for the Intel Alder Lake-S (bsc#1012628). - opp: Reduce the size of critical section in _opp_table_kref_release() (bsc#1012628). - usb: gadget: goku_udc: fix potential crashes in probe (bsc#1012628). - usb: raw-gadget: fix memory leak in gadget_setup (bsc#1012628). - selftests/ftrace: check for do_sys_openat2 in user-memory test (bsc#1012628). - selftests: pidfd: fix compilation errors due to wait.h (bsc#1012628). - ALSA: hda: Separate runtime and system suspend (bsc#1012628). - ALSA: hda: Reinstate runtime_allow() for all hda controllers (bsc#1012628). - x86/boot/compressed/64: Introduce sev_status (bsc#1012628). - gfs2: Free rd_bits later in gfs2_clear_rgrpd to fix use-after-free (bsc#1012628). - gfs2: Add missing truncate_inode_pages_final for sd_aspace (bsc#1012628). - gfs2: check for live vs. read-only file system in gfs2_fitrim (bsc#1012628). - scsi: hpsa: Fix memory leak in hpsa_init_one() (bsc#1012628). - drm/amdgpu: perform srbm soft reset always on SDMA resume (bsc#1012628). - drm/amd/pm: correct the baco reset sequence for CI ASICs (bsc#1012628). - drm/amd/pm: perform SMC reset on suspend/hibernation (bsc#1012628). - drm/amd/pm: do not use ixFEATURE_STATUS for checking smc running (bsc#1012628). - mac80211: fix use of skb payload instead of header (bsc#1012628). - cfg80211: initialize wdev data earlier (bsc#1012628). - cfg80211: regulatory: Fix inconsistent format argument (bsc#1012628). - wireguard: selftests: check that route_me_harder packets use the right sk (bsc#1012628). - tracing: Fix the checking of stackidx in __ftrace_trace_stack (bsc#1012628). - Revert "nvme-pci: remove last_sq_tail" (bsc#1012628). - ARC: [plat-hsdk] Remap CCMs super early in asm boot trampoline (bsc#1012628). - scsi: scsi_dh_alua: Avoid crash during alua_bus_detach() (bsc#1012628). - scsi: mpt3sas: Fix timeouts observed while reenabling IRQ (bsc#1012628). - nvme: introduce nvme_sync_io_queues (bsc#1012628). - nvme-rdma: avoid race between time out and tear down (bsc#1012628). - nvme-tcp: avoid race between time out and tear down (bsc#1012628). - nvme-rdma: avoid repeated request completion (bsc#1012628). - nvme-tcp: avoid repeated request completion (bsc#1012628). - iommu/amd: Increase interrupt remapping table limit to 512 entries (bsc#1012628). - s390/smp: move rcu_cpu_starting() earlier (bsc#1012628). - vfio: platform: fix reference leak in vfio_platform_open (bsc#1012628). - vfio/pci: Bypass IGD init in case of -ENODEV (bsc#1012628). - i2c: mediatek: move dma reset before i2c reset (bsc#1012628). - amd/amdgpu: Disable VCN DPG mode for Picasso (bsc#1012628). - iomap: clean up writeback state logic on writepage error (bsc#1012628). - selftests: proc: fix warning: _GNU_SOURCE redefined (bsc#1012628). - arm64: kexec_file: try more regions if loading segments fails (bsc#1012628). - riscv: Set text_offset correctly for M-Mode (bsc#1012628). - i2c: sh_mobile: implement atomic transfers (bsc#1012628). - i2c: designware: call i2c_dw_read_clear_intrbits_slave() once (bsc#1012628). - i2c: designware: slave should do WRITE_REQUESTED before WRITE_RECEIVED (bsc#1012628). - tpm_tis: Disable interrupts on ThinkPad T490s (bsc#1012628). - mfd: sprd: Add wakeup capability for PMIC IRQ (bsc#1012628). - pinctrl: intel: Fix 2 kOhm bias which is 833 Ohm (bsc#1012628). - pinctrl: intel: Set default bias in case no particular value given (bsc#1012628). - gpio: aspeed: fix ast2600 bank properties (bsc#1012628). - ARM: 9019/1: kprobes: Avoid fortify_panic() when copying optprobe template (bsc#1012628). - bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE (bsc#1012628). - libbpf, hashmap: Fix undefined behavior in hash_bits (bsc#1012628). - pinctrl: mcp23s08: Use full chunk of memory for regmap configuration (bsc#1012628). - pinctrl: aspeed: Fix GPI only function problem (bsc#1012628). - net/mlx5e: Fix modify header actions memory leak (bsc#1012628). - net/mlx5e: Protect encap route dev from concurrent release (bsc#1012628). - net/mlx5e: Use spin_lock_bh for async_icosq_lock (bsc#1012628). - net/mlx5: Fix deletion of duplicate rules (bsc#1012628). - net/mlx5: E-switch, Avoid extack error log for disabled vport (bsc#1012628). - net/mlx5e: Fix VXLAN synchronization after function reload (bsc#1012628). - net/mlx5e: Fix incorrect access of RCU-protected xdp_prog (bsc#1012628). - SUNRPC: Fix general protection fault in trace_rpc_xdr_overflow() (bsc#1012628). - NFSD: Fix use-after-free warning when doing inter-server copy (bsc#1012628). - NFSD: fix missing refcount in nfsd4_copy by nfsd4_do_async_copy (bsc#1012628). - tools/bpftool: Fix attaching flow dissector (bsc#1012628). - bpf: Zero-fill re-used per-cpu map element (bsc#1012628). - r8169: fix potential skb double free in an error path (bsc#1012628). - r8169: disable hw csum for short packets on all chip versions (bsc#1012628). - pinctrl: qcom: Move clearing pending IRQ to .irq_request_resources callback (bsc#1012628). - pinctrl: qcom: sm8250: Specify PDC map (bsc#1012628). - nbd: fix a block_device refcount leak in nbd_release (bsc#1012628). - selftest: fix flower terse dump tests (bsc#1012628). - i40e: Fix MAC address setting for a VF via Host/VM (bsc#1012628). - igc: Fix returning wrong statistics (bsc#1012628). - lan743x: correctly handle chips with internal PHY (bsc#1012628). - net: phy: realtek: support paged operations on RTL8201CP (bsc#1012628). - xfs: fix flags argument to rmap lookup when converting shared file rmaps (bsc#1012628). - xfs: set the unwritten bit in rmap lookup flags in xchk_bmap_get_rmapextents (bsc#1012628). - xfs: fix rmap key and record comparison functions (bsc#1012628). - xfs: fix brainos in the refcount scrubber's rmap fragment processor (bsc#1012628). - lan743x: fix "BUG: invalid wait context" when setting rx mode (bsc#1012628). - xfs: fix a missing unlock on error in xfs_fs_map_blocks (bsc#1012628). - of/address: Fix of_node memory leak in of_dma_is_coherent (bsc#1012628). - ch_ktls: Update cheksum information (bsc#1012628). - ch_ktls: tcb update fails sometimes (bsc#1012628). - cosa: Add missing kfree in error path of cosa_write (bsc#1012628). - hwmon: (applesmc) Re-work SMC comms (bsc#1012628). - NFS: Fix listxattr receive buffer size (bsc#1012628). - vrf: Fix fast path output packet handling with async Netfilter rules (bsc#1012628). - lan743x: fix use of uninitialized variable (bsc#1012628). - arm64/mm: Validate hotplug range before creating linear mapping (bsc#1012628). - kernel/watchdog: fix watchdog_allowed_mask not used warning (bsc#1012628). - mm: memcontrol: fix missing wakeup polling thread (bsc#1012628). - afs: Fix afs_write_end() when called with copied == 0 [ver #3] (bsc#1012628). - perf: Fix get_recursion_context() (bsc#1012628). - nvme: factor out a nvme_configure_metadata helper (bsc#1012628). - nvme: freeze the queue over ->lba_shift updates (bsc#1012628). - nvme: fix incorrect behavior when BLKROSET is called by the user (bsc#1012628). - perf: Simplify group_sched_in() (bsc#1012628). - perf: Fix event multiplexing for exclusive groups (bsc#1012628). - firmware: xilinx: fix out-of-bounds access (bsc#1012628). - erofs: fix setting up pcluster for temporary pages (bsc#1012628). - erofs: derive atime instead of leaving it empty (bsc#1012628). - ext4: correctly report "not supported" for {usr,grp}jquota when !CONFIG_QUOTA (bsc#1012628). - ext4: unlock xattr_sem properly in ext4_inline_data_truncate() (bsc#1012628). - btrfs: fix potential overflow in cluster_pages_for_defrag on 32bit arch (bsc#1012628). - btrfs: ref-verify: fix memory leak in btrfs_ref_tree_mod (bsc#1012628). - btrfs: fix min reserved size calculation in merge_reloc_root (bsc#1012628). - btrfs: dev-replace: fail mount if we don't have replace item with target device (bsc#1012628). - KVM: arm64: Don't hide ID registers from userspace (bsc#1012628). - speakup: Fix var_id_t values and thus keymap (bsc#1012628). - speakup ttyio: Do not schedule() in ttyio_in_nowait (bsc#1012628). - speakup: Fix clearing selection in safe context (bsc#1012628). - thunderbolt: Fix memory leak if ida_simple_get() fails in enumerate_services() (bsc#1012628). - thunderbolt: Add the missed ida_simple_remove() in ring_request_msix() (bsc#1012628). - uio: Fix use-after-free in uio_unregister_device() (bsc#1012628). - Revert "usb: musb: convert to devm_platform_ioremap_resource_byname" (bsc#1012628). - usb: cdc-acm: Add DISABLE_ECHO for Renesas USB Download mode (bsc#1012628). - usb: typec: ucsi: Report power supply changes (bsc#1012628). - xhci: hisilicon: fix refercence leak in xhci_histb_probe (bsc#1012628). - virtio: virtio_console: fix DMA memory allocation for rproc serial (bsc#1012628). - mei: protect mei_cl_mtu from null dereference (bsc#1012628). - futex: Don't enable IRQs unconditionally in put_pi_state() (bsc#1012628). - jbd2: fix up sparse warnings in checkpoint code (bsc#1012628). - bootconfig: Extend the magic check range to the preceding 3 bytes (bsc#1012628). - mm/compaction: count pages and stop correctly during page isolation (bsc#1012628). - mm/compaction: stop isolation if too many pages are isolated and we have pages to migrate (bsc#1012628). - mm/slub: fix panic in slab_alloc_node() (bsc#1012628). - mm/vmscan: fix NR_ISOLATED_FILE corruption on 64-bit (bsc#1012628). - mm/gup: use unpin_user_pages() in __gup_longterm_locked() (bsc#1012628). - Revert "kernel/reboot.c: convert simple_strtoul to kstrtoint" (bsc#1012628). - reboot: fix overflow parsing reboot cpu number (bsc#1012628). - hugetlbfs: fix anon huge page migration race (bsc#1012628). - ocfs2: initialize ip_next_orphan (bsc#1012628). - hwmon: (amd_energy) modify the visibility of the counters (bsc#1012628). - selinux: Fix error return code in sel_ib_pkey_sid_slow() (bsc#1012628). - io_uring: round-up cq size before comparing with rounded sq size (bsc#1012628). - gpio: sifive: Fix SiFive gpio probe (bsc#1012628). - gpio: pcie-idio-24: Fix irq mask when masking (bsc#1012628). - gpio: pcie-idio-24: Fix IRQ Enable Register value (bsc#1012628). - gpio: pcie-idio-24: Enable PEX8311 interrupts (bsc#1012628). - mmc: sdhci-of-esdhc: Handle pulse width detection erratum for more SoCs (bsc#1012628). - mmc: renesas_sdhi_core: Add missing tmio_mmc_host_free() at remove (bsc#1012628). - don't dump the threads that had been already exiting when zapped (bsc#1012628). - drm/amd/display: Add missing pflip irq (bsc#1012628). - drm/i915: Correctly set SFC capability for video engines (bsc#1012628). - drm/gma500: Fix out-of-bounds access to struct drm_device.vblank[] (bsc#1012628). - NFSv4.2: fix failure to unregister shrinker (bsc#1012628). - pinctrl: amd: use higher precision for 512 RtcClk (bsc#1012628). - pinctrl: amd: fix incorrect way to disable debounce filter (bsc#1012628). - swiotlb: fix "x86: Don't panic if can not alloc buffer for swiotlb" (bsc#1012628). - cpufreq: Introduce governor flags (bsc#1012628). - cpufreq: Introduce CPUFREQ_GOV_STRICT_TARGET (bsc#1012628). - cpufreq: Add strict_target to struct cpufreq_policy (bsc#1012628). - cpufreq: intel_pstate: Take CPUFREQ_GOV_STRICT_TARGET into account (bsc#1012628). - ethtool: netlink: add missing netdev_features_change() call (bsc#1012628). - IPv6: Set SIT tunnel hard_header_len to zero (bsc#1012628). - net/af_iucv: fix null pointer dereference on shutdown (bsc#1012628). - net: udp: fix IP header access and skb lookup on Fast/frag0 UDP GRO (bsc#1012628). - net: udp: fix UDP header access on Fast/frag0 UDP GRO (bsc#1012628). - net: Update window_clamp if SOCK_RCVBUF is set (bsc#1012628). - net/x25: Fix null-ptr-deref in x25_connect (bsc#1012628). - tipc: fix memory leak in tipc_topsrv_start() (bsc#1012628). - devlink: Avoid overwriting port attributes of registered port (bsc#1012628). - mptcp: provide rmem[0] limit (bsc#1012628). - tunnels: Fix off-by-one in lower MTU bounds for ICMP/ICMPv6 replies (bsc#1012628). - powerpc/603: Always fault when _PAGE_ACCESSED is not set (bsc#1012628). - null_blk: Fix scheduling in atomic with zoned mode (bsc#1012628). - perf scripting python: Avoid declaring function pointers with a visibility attribute (bsc#1012628). - coresight: etm: perf: Sink selection using sysfs is deprecated (bsc#1012628). - coresight: Fix uninitialised pointer bug in etm_setup_aux() (bsc#1012628). - Convert trailing spaces and periods in path components (bsc#1012628). - commit 21e5163 - PCI: Always enable ACS even if no ACS Capability (bsc#1178211). - commit a40af1e - loop: Fix occasional uevent drop (bsc#1177900). - block: add a return value to set_capacity_revalidate_and_notify (bsc#1177900). - commit 98395e1 - btrfs: qgroup: don't commit transaction when we already hold the handle (bsc#1178634). Update upstream status and take the upstream version. - commit 60a737e ==== kured ==== Version update (1.5.0 -> 1.5.1) - Update to version 1.5.1: * rename annotation-ttl to lock-ttl in all places, follow-up to #213 * Drain: allow pods grace period to terminate * Prepare 1.5.1 release * Add lint job * Make lint happier in pkg folder * Make lint happier * Remove prom-active-alerts * update docs following #210 * run 'go mod tidy' * Replaced --annotationTTL with --lockTTL and made it work correctly * Refactor drain/uncordon * Remove kubectl exception in container scanning * Bump prometheus * Use kubectl as library instead of calling from cli * fix: Follow DKL-DI-0004 guideline * feat: Add security scanning into CI * add missing quote - thanks Karan Arora for reporting * Bump helm chart version * Remove quote for parameter alert-filter-regexp * Release helper ==== salt ==== Subpackages: python3-salt salt-master salt-minion salt-standalone-formulas-configuration - Fix syntax error on pkgrepo state with Python 2.7 - transactional_update: unify with chroot.call - Added: * pkgrepo-support-python-2.7-function-call-295.patch * transactional_update-unify-with-chroot.call.patch - Add "migrated" state and GPG key management functions - Added: * add-migrated-state-and-gpg-key-management-functions-.patch - Master can read grains - Added: * grains-master-can-read-grains.patch - Fix for broken psutil (bsc#1102248) - Added: * fix-for-bsc-1102248-psutil-is-broken-and-so-process-.patch

1 0

[opensuse-kubic] Re: MicroOS KDE does not mount USB drives
by Syds Bearda 25 Nov '20

25 Nov '20

Hi, I reinstalled MicroOS desktop KDE this morning as the new partitioning was enabled. However as I changed my DE to KDE I could not mount my USB drive anymore. I enabled the automount removable drives in the system settings. And it still did nothing. Reboots also didn't work. As such I'm now running Gnome again and there it works as intended. I did also install nfs-client and autofs as I thought the issue might be with these packages. Do you guys know which package is missing on the KDE desktop? BR, Syds

4 12