June 2017 - openSUSE Kernel - openSUSE Mailing Lists

[opensuse-kernel] i586/i686 rpms larger than x86_64
by Felix Miata 27 Jun '17

27 Jun '17

Why is it that 32 bit kernel rpms are routinely & significantly bigger packages than 64 bit? Is it expected? It seems backwards. Examples from TW 20170620: 4.11.6 default i586 65770932 4.11.6 default x86_64 58689956 Former is 112% of latter. Latter is 89.2% of former. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

3 2

[opensuse-kernel] Compiling KMP that depends on another KMP (was: Re: [opensuse-factory] [Resolved] Leap 42.3 kernel 4.4.71x and problem installing the Nvidia driver)
by Andrei Borzenkov 19 Jun '17

19 Jun '17

Of course, nothing is "resolved" by removing package that is part of distribution. It just helps to diagnose it. 19.06.2017 02:32, Roman Bysh пишет: > Hi everybody, > > If you have a problem in Leap 42.3 installing your Nvidia driver you > must remove > the "drm-knp-default" package. > Oh! So, how does one compile KMP that depends on another KMP, which itself overrides in-tree kernel driver? We somehow need to pickup correct symbol versions, otherwise we get [ 202.462673] nvidia_drm: disagrees about version of symbol drm_atomic_get_connector_state [ 202.462674] nvidia_drm: Unknown symbol drm_atomic_get_connector_state (err -22) [ 202.462679] nvidia_drm: disagrees about version of symbol drm_gem_prime_export [ 202.462680] nvidia_drm: Unknown symbol drm_gem_prime_export (err -22) -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 5

[opensuse-kernel] Building and installing a patched openSUSE kernel
by Robert Munteanu 15 Jun '17

15 Jun '17

Hi, I am trying to develop a new HID module. This module requires a change to drivers/hid/hid-core.c, which is built-in to the kernel, so I can't get away with just loading my module. I have tried building a new kernel using osc - osc co openSUSE:Factory kernel-default - ( applied patches ) - osc build After building the installation fails since I don't have a matching kernel-devel: $ robert@rombert:/var/tmp/build-root> sudo rpm -Fvh /var/tmp/build-root/standard-x86_64/home/abuild/rpmbuild/RPMS/x86_64/*.rpm error: Failed dependencies: kernel-devel = 4.11.4-2 is needed by kernel-default-devel-4.11.4-2.x86_64 There is no openSUSE:Factory/kernel-devel, so I am apparently stuck. My question is - how can I self-build an openSUSE kernel with my patch applied? I am reluctant to build the upstream kernel and install it since I'm not sure if it will overwrite an existing kernel which could cause trouble. Thanks, Robert -- http://robert.muntea.nu/ -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 2

[opensuse-kernel] [PATCH openSUSE 42.3 00/19] Patch series for armv7l
by matwey.kornilov＠gmail.com 07 Jun '17

07 Jun '17

From: "Matwey V. Kornilov" <matwey.kornilov(a)gmail.com> Reference: https://bugzilla.opensuse.org/show_bug.cgi?id=1043231 Boris BREZILLON (1): pwm: rcar: Make use of pwm_is_enabled() Boris Brezillon (2): input: misc: max77693: Use pwm_get_args() where appropriate pwm: Use pwm_get/set_xxx() helpers where appropriate Chanwoo Choi (3): extcon: adc-jack: Remove the usage of extcon_set_state() extcon: arizona: Remove the usage of extcon_update_state() power: axp288_charger: Replace deprecatd API of extcon Jani Nikula (1): drm: define drm_compat_ioctl NULL on CONFIG_COMPAT=n and reduce #ifdefs Jon Hunter (1): ARM: EXYNOS: Remove calls to of_genpd_get_from_provider() Kejian Yan (2): ACPI: bus: add stub acpi_evaluate_dsm() to linux/acpi.h ACPI: bus: add stub acpi_dev_found() to linux/acpi.h Lars-Peter Clausen (1): dmaengine: Add transfer termination synchronization support Marc Zyngier (1): ARM: gic-v3: Work around definition of gic_write_bpr1 Michal Suchanek (1): spi: expose master transfer size limitation. Peter Ujfalusi (2): dmaengine: core: Move and merge the code paths using private_candidate dmaengine: core: Introduce new, universal API to request a channel Robert Jarzmik (1): dmaengine: enable DMA_CTRL_REUSE Shawn Lin (1): dmaengine: core: expose max burst capability to clients Viresh Kumar (2): mvebu: Use dev_pm_opp_set_sharing_cpus() to mark OPP tables as shared cpufreq: tegra124: No need of setting platform-data Documentation/dmaengine/client.txt | 59 ++++++--- Documentation/dmaengine/provider.txt | 20 ++- arch/arm/include/asm/arch_gicv3.h | 4 + arch/arm/mach-exynos/pm_domains.c | 23 ++-- arch/arm/mach-mvebu/pmsu.c | 14 +-- drivers/cpufreq/tegra124-cpufreq.c | 7 -- drivers/dma/dmaengine.c | 177 +++++++++++++++++++-------- drivers/extcon/extcon-adc-jack.c | 26 ++-- drivers/extcon/extcon-arizona.c | 11 +- drivers/gpu/drm/ast/ast_drv.c | 2 - drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 2 - drivers/gpu/drm/bochs/bochs_drv.c | 2 - drivers/gpu/drm/cirrus/cirrus_drv.c | 2 - drivers/gpu/drm/drm_fops.c | 39 ++++++ drivers/gpu/drm/exynos/exynos_drm_drv.c | 2 - drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 2 - drivers/gpu/drm/gma500/psb_drv.c | 2 - drivers/gpu/drm/i810/i810_dma.c | 2 - drivers/gpu/drm/i810/i810_drv.c | 2 - drivers/gpu/drm/i915/i915_drv.c | 2 - drivers/gpu/drm/i915/i915_drv.h | 2 + drivers/gpu/drm/mgag200/mgag200_drv.c | 2 - drivers/gpu/drm/msm/msm_drv.c | 2 - drivers/gpu/drm/rcar-du/rcar_du_drv.c | 2 - drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 2 - drivers/gpu/drm/savage/savage_drv.c | 2 - drivers/gpu/drm/shmobile/shmob_drm_drv.c | 2 - drivers/gpu/drm/sis/sis_drv.c | 2 - drivers/gpu/drm/sti/sti_drv.c | 2 - drivers/gpu/drm/tdfx/tdfx_drv.c | 2 - drivers/gpu/drm/tegra/drm.c | 2 - drivers/gpu/drm/tilcdc/tilcdc_drv.c | 2 - drivers/gpu/drm/udl/udl_drv.c | 2 - drivers/gpu/drm/vc4/vc4_drv.c | 2 - drivers/gpu/drm/via/via_drv.c | 2 - drivers/gpu/drm/virtio/virtgpu_drv.c | 2 - drivers/input/misc/max77693-haptic.c | 17 ++- drivers/power/axp288_charger.c | 77 ++++++++---- drivers/pwm/pwm-crc.c | 2 +- drivers/pwm/pwm-lpc18xx-sct.c | 2 +- drivers/pwm/pwm-rcar.c | 2 +- drivers/pwm/pwm-sun4i.c | 3 +- include/drm/drmP.h | 5 + include/linux/acpi.h | 13 ++ include/linux/dmaengine.h | 147 ++++++++++++++++++++-- include/linux/extcon/extcon-adc-jack.h | 4 +- include/linux/spi/spi.h | 15 +++ 47 files changed, 512 insertions(+), 207 deletions(-) -- 2.12.0 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

3 17

[opensuse-kernel] Re: [PATCH 1/2] mvebu: Use dev_pm_opp_set_sharing_cpus() to mark OPP tables as shared
by Matwey V. Kornilov 07 Jun '17

07 Jun '17

2017-06-07 7:01 GMT+03:00 Viresh Kumar <viresh.kumar(a)linaro.org>: > On 06-06-17, 20:47, matwey.kornilov(a)gmail.com wrote: >> From: Viresh Kumar <viresh.kumar(a)linaro.org> >> >> That will allow us to avoid using cpufreq-dt platform data. >> >> Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> >> Acked-by: Arnd Bergmann <arnd(a)arndb.de> >> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> >> Git-commit: 947bd567f7a5185325a8f85e5235cf1145bd4417 >> Patch-mainline: v4.7-rc1 >> Signed-off-by: Matwey V. Kornilov <matwey.kornilov(a)gmail.com> >> --- >> Hi, >> >> The following patches are required to fix kernel build for armv7l. >> >> The build is currently broken due to the following SUSE patch: >> >> rk3399-0003-cpufreq-dt-Kill-platform-data.patch >> >> arch/arm/mach-mvebu/pmsu.c | 14 +++++++------- >> 1 file changed, 7 insertions(+), 7 deletions(-) > > Forgot to use --suppress-cc while sending these ? Yep, I am sorry for it. > > -- > viresh -- With best regards, Matwey V. Kornilov http://blog.matwey.name xmpp://0x2207@jabber.ru -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 0

[opensuse-kernel] [RFC] dtb-*: Generate the filelists during build
by Michal Marek 06 Jun '17

06 Jun '17

This allows us to share the mkspec-dtb script among slightly different branches. Nonexistent dtbs will result in empty RPM packages. --- rpm/dtb.spec.in.in | 42 +++++++++++++++++++++++++++++++++--------- rpm/mkspec-dtb | 25 +++++-------------------- 2 files changed, 38 insertions(+), 29 deletions(-) diff --git a/rpm/dtb.spec.in.in b/rpm/dtb.spec.in.in index 0ea9b4639d8b..11e9bae5ec8e 100644 --- a/rpm/dtb.spec.in.in +++ b/rpm/dtb.spec.in.in @@ -75,6 +75,9 @@ DTC_FLAGS="$DTC_FLAGS -@" cd $source/$DTS_folder for dts in $ALL_SUPPORTED_DTB; do + if test ! -e "$dts"; then + continue + fi target=${dts%*.dts} mkdir -p $PPDIR/$(dirname $target) cpp -x assembler-with-cpp -undef -D__DTS__ -nostdinc -I. -I$SRCDIR/include/ -I$SRCDIR/scripts/dtc/include-prefixes/ -P $target.dts -o $PPDIR/$target.dts @@ -85,18 +88,39 @@ done %install +cat >boilerplate.list <<EOF +%%defattr(-,root,root) +%%doc COPYING +%%ghost /boot/dtb +%%dir %{dtbdir} +EOF + cd pp -for dts in $ALL_SUPPORTED_DTB; do - target=${dts%*.dts} - install -m 700 -d %{buildroot}%{dtbdir}/$(dirname $target) - install -m 644 $target.dtb %{buildroot}%{dtbdir}/$(dirname $target) +for spec in $ALL_SUPPORTED_PKG_DTB; do + pkg=${spec%:*} + glob=${spec#*:} + : >../$pkg.list + for dts in $glob; do + if test ! -e "$dts"; then + continue + fi + if test ! -s ../$pkg.list; then + cp ../boilerplate.list ../$pkg.list + fi + target=${dts%*.dts} + install -m 700 -d %{buildroot}%{dtbdir}/$(dirname $target) + install -m 644 $target.dtb %{buildroot}%{dtbdir}/$(dirname $target) + echo "%%{dtbdir}/$target.dtb" >>../$pkg.list + if test "$(dirname $target)" != "."; then + echo "%%dir %%{dtbdir}/$(dirname $target)" >>../$pkg.list + fi %ifarch aarch64 - # HACK: work around U-Boot ignoring vendor dir - baselink=%{dtbdir}/$(basename $target).dtb - vendordir=$(basename $(dirname $target)) - ln -s $target.dtb %{buildroot}$baselink - echo $baselink >> ../dtb-$vendordir.list + # HACK: work around U-Boot ignoring vendor dir + baselink=%{dtbdir}/$(basename $target).dtb + ln -s $target.dtb %{buildroot}$baselink + echo $baselink >> ../$pkg.list %endif + done done cd - diff --git a/rpm/mkspec-dtb b/rpm/mkspec-dtb index 09c7126f3c59..d96ce76892cc 100755 --- a/rpm/mkspec-dtb +++ b/rpm/mkspec-dtb @@ -100,6 +100,7 @@ sub generate_spec($$$) my $subpkg_post = ""; my $subpkg_files = ""; my $all_supported_dtb = ""; + my $all_supported_pkg_dtb = ""; my $DTS_folder = "arch/arm/boot/dts"; if ($exclusive_arch =~ /aarch64/) { $DTS_folder = "arch/arm64/boot/dts"; @@ -146,31 +147,14 @@ sub generate_spec($$$) "# Unless /boot/dtb exists as real directory, create a symlink.\n" . "[ -d dtb ] || ln -sf dtb-%kernelrelease dtb\n\n"; - my $bin_supported_dtb = $SUPPORTED_DTB; - $bin_supported_dtb =~ s/\.dts/\.dtb/g; - - my $dtb_subdir = ""; - if ($bin_supported_dtb =~ /(.*)\/[^\/]+$/) { - $dtb_subdir = "%dir %{dtbdir}/$1\n"; - } - $subpkg_files .= - "%ifarch aarch64\n" . - "%files -n $PKG_NAME -f $PKG_NAME.list\n" . - "%else\n" . - "%files -n $PKG_NAME\n" . - "%endif\n" . - "%defattr(-,root,root)\n" . - "%doc COPYING\n" . - "%ghost /boot/dtb\n" . - "%dir %{dtbdir}\n" . - $dtb_subdir . - "%{dtbdir}/$bin_supported_dtb\n" . - "\n"; + "%files -n $PKG_NAME -f $PKG_NAME.list\n\n"; $all_supported_dtb .= "$SUPPORTED_DTB "; + $all_supported_pkg_dtb .= "$PKG_NAME:$SUPPORTED_DTB "; } chomp($all_supported_dtb); + chomp($all_supported_pkg_dtb); # spec file generation while(<TEMPLATE>){ @@ -179,6 +163,7 @@ sub generate_spec($$$) $_ =~ s/\$DTS_folder/$DTS_folder/g; $_ =~ s/\$SUBPKG_DESC/$subpkg_desc/g; $_ =~ s/\$ALL_SUPPORTED_DTB/$all_supported_dtb/g; + $_ =~ s/\$ALL_SUPPORTED_PKG_DTB/$all_supported_pkg_dtb/g; $_ =~ s/\$SUBPKG_POST\n?/$subpkg_post/g; $_ =~ s/\$SUBPKG_FILES\n?/$subpkg_files/g; print SPEC $_; -- 2.10.2 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

4 9

[opensuse-kernel] [PATCH] ARM: EXYNOS: Remove calls to of_genpd_get_from_provider()
by matwey.kornilov＠gmail.com 06 Jun '17

06 Jun '17

From: Jon Hunter <jonathanh(a)nvidia.com> Update the EXYNOS PM domain code to use the of_genpd_add_subdomain() and remove any calls to of_genpd_get_from_provider(). Signed-off-by: Jon Hunter <jonathanh(a)nvidia.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski(a)samsung.com> Acked-by: Ulf Hansson <ulf.hansson(a)linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Git-commit: 8d68c3713aa6dcf4f65f7fa8f0b6f692ace18d07 Patch-mainline: v4.9-rc1 Signed-off-by: Matwey V. Kornilov <matwey.kornilov(a)gmail.com> --- Hello, this patch is required to fix kernel build for armv7l. The build is currently broken due to the following SUSE patch: rk3399-0072-PM-Domains-Don-t-expose-generic_pm_domain-structure-.patch arch/arm/mach-exynos/pm_domains.c | 23 ++++++++--------------- 1 file changed, 8 insertions(+), 15 deletions(-) diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 875a2bab64f6..a540b3933d15 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -193,29 +193,22 @@ no_clk: /* Assign the child power domains to their parents */ for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") { - struct generic_pm_domain *child_domain, *parent_domain; - struct of_phandle_args args; + struct of_phandle_args child, parent; - args.np = np; - args.args_count = 0; - child_domain = of_genpd_get_from_provider(&args); - if (IS_ERR(child_domain)) - continue; + child.np = np; + child.args_count = 0; if (of_parse_phandle_with_args(np, "power-domains", - "#power-domain-cells", 0, &args) != 0) - continue; - - parent_domain = of_genpd_get_from_provider(&args); - if (IS_ERR(parent_domain)) + "#power-domain-cells", 0, + &parent) != 0) continue; - if (pm_genpd_add_subdomain(parent_domain, child_domain)) + if (of_genpd_add_subdomain(&parent, &child)) pr_warn("%s failed to add subdomain: %s\n", - parent_domain->name, child_domain->name); + parent.np->name, child.np->name); else pr_info("%s has as child subdomain: %s.\n", - parent_domain->name, child_domain->name); + parent.np->name, child.np->name); } return 0; -- 2.12.0 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

4 5

[opensuse-kernel] [PATCH 1/2] mvebu: Use dev_pm_opp_set_sharing_cpus() to mark OPP tables as shared
by matwey.kornilov＠gmail.com 06 Jun '17

06 Jun '17

From: Viresh Kumar <viresh.kumar(a)linaro.org> That will allow us to avoid using cpufreq-dt platform data. Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> Acked-by: Arnd Bergmann <arnd(a)arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Git-commit: 947bd567f7a5185325a8f85e5235cf1145bd4417 Patch-mainline: v4.7-rc1 Signed-off-by: Matwey V. Kornilov <matwey.kornilov(a)gmail.com> --- Hi, The following patches are required to fix kernel build for armv7l. The build is currently broken due to the following SUSE patch: rk3399-0003-cpufreq-dt-Kill-platform-data.patch arch/arm/mach-mvebu/pmsu.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index ed8fda4cd055..8928f7caaf70 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -20,7 +20,6 @@ #include <linux/clk.h> #include <linux/cpu_pm.h> -#include <linux/cpufreq-dt.h> #include <linux/delay.h> #include <linux/init.h> #include <linux/io.h> @@ -609,10 +608,6 @@ int mvebu_pmsu_dfs_request(int cpu) return 0; } -struct cpufreq_dt_platform_data cpufreq_dt_pd = { - .independent_clocks = true, -}; - static int __init armada_xp_pmsu_cpufreq_init(void) { struct device_node *np; @@ -683,10 +678,15 @@ static int __init armada_xp_pmsu_cpufreq_init(void) clk_put(clk); return ret; } + + ret = dev_pm_opp_set_sharing_cpus(cpu_dev, + cpumask_of(cpu_dev->id)); + if (ret) + dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n", + __func__, ret); } - platform_device_register_data(NULL, "cpufreq-dt", -1, - &cpufreq_dt_pd, sizeof(cpufreq_dt_pd)); + platform_device_register_simple("cpufreq-dt", -1, NULL, 0); return 0; } -- 2.12.0 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 1

[opensuse-kernel] [PATCH] armv7hl: Update configs
by Matwey V. Kornilov 04 Jun '17

04 Jun '17

Signed-off-by: Matwey V. Kornilov <matwey.kornilov(a)gmail.com> --- Sorry for late post. This patch is to update armv7hl configs for Leap 42.3 Ports. config.conf | 6 ++-- config/armv7hl/default | 91 ++++++++++++++++++++++++++++++++++++++++++++------ config/armv7hl/lpae | 91 ++++++++++++++++++++++++++++++++++++++++++++------ config/armv7hl/vanilla | 7 ++++ 4 files changed, 170 insertions(+), 25 deletions(-) diff --git a/config.conf b/config.conf index 70b9227..7f17451 100644 --- a/config.conf +++ b/config.conf @@ -23,6 +23,6 @@ +s390x s390x/vanilla +s390x -syms s390x/zfcpdump -+armv7hl -!needs_updating armv7hl/default -+armv7hl -!needs_updating armv7hl/vanilla -+armv7hl -!needs_updating armv7hl/lpae ++armv7hl armv7hl/default ++armv7hl armv7hl/vanilla ++armv7hl armv7hl/lpae diff --git a/config/armv7hl/default b/config/armv7hl/default index e19cdd1..71f9eae 100644 --- a/config/armv7hl/default +++ b/config/armv7hl/default @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/arm 4.4.38 Kernel Configuration +# Linux/arm 4.4.70 Kernel Configuration # CONFIG_ARM=y CONFIG_ARM_HAS_SG_CHAIN=y @@ -79,6 +79,7 @@ CONFIG_HANDLE_DOMAIN_IRQ=y # CONFIG_IRQ_DOMAIN_DEBUG is not set CONFIG_IRQ_FORCED_THREADING=y CONFIG_SPARSE_IRQ=y +CONFIG_ARCH_CLOCKSOURCE_DATA=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_ARCH_HAS_TICK_BROADCAST=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y @@ -182,6 +183,8 @@ CONFIG_SYSFS_SYSCALL=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set +CONFIG_KALLSYMS_BASE_RELATIVE=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y @@ -215,6 +218,7 @@ CONFIG_SLAB=y # CONFIG_SYSTEM_DATA_VERIFICATION is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y +CONFIG_CRASH_CORE=y CONFIG_KEXEC_CORE=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y @@ -231,7 +235,6 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_GENERIC_IDLE_POLL_SETUP=y @@ -282,8 +285,12 @@ CONFIG_LBDAF=y CONFIG_BLK_DEV_BSG=y CONFIG_BLK_DEV_BSGLIB=y CONFIG_BLK_DEV_INTEGRITY=y +CONFIG_BLK_DEV_ZONED=y CONFIG_BLK_DEV_THROTTLING=y # CONFIG_BLK_CMDLINE_PARSER is not set +CONFIG_BLK_WBT=y +# CONFIG_BLK_WBT_SQ is not set +CONFIG_BLK_WBT_MQ=y # # Partition Types @@ -309,6 +316,7 @@ CONFIG_KARMA_PARTITION=y CONFIG_EFI_PARTITION=y CONFIG_SYSV68_PARTITION=y # CONFIG_CMDLINE_PARTITION is not set +CONFIG_BLK_MQ_PCI=y # # IO Schedulers @@ -743,6 +751,8 @@ CONFIG_PCIE_IPROC_PLATFORM=y CONFIG_PCIE_IPROC_BCMA=y CONFIG_PCIE_ALTERA=y CONFIG_PCIE_ALTERA_MSI=y +CONFIG_PCIE_ROCKCHIP=y +# CONFIG_PCIE_ARMADA_8K is not set CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y # CONFIG_PCIE_ECRC is not set @@ -857,6 +867,7 @@ CONFIG_KEXEC=y CONFIG_ATAGS_PROC=y CONFIG_CRASH_DUMP=y CONFIG_AUTO_ZRELADDR=y +# CONFIG_EFI is not set # # CPU Power Management @@ -884,6 +895,7 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y # CPU frequency scaling drivers # CONFIG_CPUFREQ_DT=m +CONFIG_CPUFREQ_DT_PLATDEV=y CONFIG_ARM_BIG_LITTLE_CPUFREQ=y CONFIG_ARM_DT_BL_CPUFREQ=m CONFIG_ARM_VEXPRESS_SPC_CPUFREQ=y @@ -1582,7 +1594,6 @@ CONFIG_OPENVSWITCH_GRE=m CONFIG_OPENVSWITCH_VXLAN=m CONFIG_OPENVSWITCH_GENEVE=m CONFIG_VSOCKETS=m -CONFIG_NETLINK_MMAP=y CONFIG_NETLINK_DIAG=m CONFIG_MPLS=y CONFIG_NET_MPLS_GSO=m @@ -1594,6 +1605,7 @@ CONFIG_NET_L3_MASTER_DEV=y CONFIG_RPS=y CONFIG_RFS_ACCEL=y CONFIG_XPS=y +CONFIG_HWBM=y CONFIG_CGROUP_NET_PRIO=y CONFIG_CGROUP_NET_CLASSID=y CONFIG_NET_RX_BUSY_POLL=y @@ -1825,6 +1837,8 @@ CONFIG_NET_9P_VIRTIO=m # CONFIG_CEPH_LIB is not set # CONFIG_NFC is not set CONFIG_LWTUNNEL=y +CONFIG_NET_DEVLINK=m +CONFIG_MAY_USE_DEVLINK=m CONFIG_HAVE_BPF_JIT=y # @@ -2136,7 +2150,15 @@ CONFIG_MG_DISK_RES=0 CONFIG_VIRTIO_BLK=m # CONFIG_BLK_DEV_RBD is not set # CONFIG_BLK_DEV_RSXX is not set +CONFIG_NVME_CORE=m # CONFIG_BLK_DEV_NVME is not set +# CONFIG_BLK_DEV_NVME_SCSI is not set +CONFIG_NVME_FABRICS=m +CONFIG_NVME_FC=m +CONFIG_NVME_TARGET=m +CONFIG_NVME_TARGET_LOOP=m +CONFIG_NVME_TARGET_FC=m +# CONFIG_NVME_TARGET_FCLOOP is not set # # Misc devices @@ -2350,7 +2372,7 @@ CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI=m CONFIG_SATA_AHCI_PLATFORM=m -# CONFIG_AHCI_BRCMSTB is not set +CONFIG_AHCI_BRCM=m CONFIG_AHCI_ST=m CONFIG_AHCI_IMX=m # CONFIG_AHCI_CEVA is not set @@ -2458,7 +2480,7 @@ CONFIG_BLK_DEV_DM=m # CONFIG_DM_MQ_DEFAULT is not set # CONFIG_DM_DEBUG is not set CONFIG_DM_BUFIO=m -# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set +# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set CONFIG_DM_BIO_PRISON=m CONFIG_DM_PERSISTENT_DATA=m CONFIG_DM_CRYPT=m @@ -2585,6 +2607,7 @@ CONFIG_ALTERA_TSE=m CONFIG_NET_VENDOR_AMD=y # CONFIG_AMD8111_ETH is not set # CONFIG_PCNET32 is not set +# CONFIG_AMD_XGBE_HAVE_ECC is not set CONFIG_NET_VENDOR_ARC=y CONFIG_ARC_EMAC_CORE=m CONFIG_ARC_EMAC=m @@ -2613,6 +2636,7 @@ CONFIG_BGMAC=m CONFIG_SYSTEMPORT=m CONFIG_BNXT=m CONFIG_BNXT_SRIOV=y +CONFIG_BNXT_DCB=y CONFIG_NET_VENDOR_BROCADE=y # CONFIG_BNA is not set CONFIG_NET_CALXEDA_XGMAC=m @@ -2684,7 +2708,9 @@ CONFIG_NET_VENDOR_I825XX=y CONFIG_NET_VENDOR_MARVELL=y CONFIG_MV643XX_ETH=m CONFIG_MVMDIO=m +CONFIG_MVNETA_BM_ENABLE=m CONFIG_MVNETA=m +CONFIG_MVNETA_BM=m CONFIG_MVPP2=m CONFIG_PXA168_ETH=m # CONFIG_SKGE is not set @@ -2729,6 +2755,7 @@ CONFIG_NET_VENDOR_QLOGIC=y # CONFIG_QED is not set CONFIG_NET_VENDOR_QUALCOMM=y CONFIG_QCA7000=m +CONFIG_QCOM_EMAC=m CONFIG_NET_VENDOR_REALTEK=y # CONFIG_8139CP is not set # CONFIG_8139TOO is not set @@ -2748,7 +2775,10 @@ CONFIG_NET_VENDOR_SILAN=y CONFIG_NET_VENDOR_SIS=y # CONFIG_SIS900 is not set # CONFIG_SIS190 is not set +CONFIG_NET_VENDOR_SOLARFLARE=y # CONFIG_SFC is not set +CONFIG_SFC_FALCON=m +CONFIG_SFC_FALCON_MTD=y CONFIG_NET_VENDOR_SMSC=y CONFIG_SMC91X=m # CONFIG_EPIC100 is not set @@ -2841,7 +2871,6 @@ CONFIG_MDIO_BUS_MUX_GPIO=m CONFIG_MDIO_BUS_MUX_MMIOREG=m CONFIG_MDIO_BCM_UNIMAC=m CONFIG_MDIO_BCM_IPROC=m -# CONFIG_MDIO_XGENE is not set # CONFIG_MICREL_KS8995MA is not set CONFIG_PLIP=m CONFIG_PPP=m @@ -3607,6 +3636,8 @@ CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE=y CONFIG_SERIAL_ST_ASC=y CONFIG_SERIAL_ST_ASC_CONSOLE=y # CONFIG_SERIAL_STM32 is not set +CONFIG_SERIAL_MVEBU_UART=y +CONFIG_SERIAL_MVEBU_CONSOLE=y # CONFIG_TTY_PRINTK is not set CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set @@ -3639,9 +3670,13 @@ CONFIG_R3964=m CONFIG_RAW_DRIVER=m CONFIG_MAX_RAW_DEVS=4096 CONFIG_TCG_TPM=y +CONFIG_TCG_TIS_CORE=m +CONFIG_TCG_TIS=m +CONFIG_TCG_TIS_SPI=m CONFIG_TCG_TIS_I2C_ATMEL=m CONFIG_TCG_TIS_I2C_INFINEON=m CONFIG_TCG_TIS_I2C_NUVOTON=m +CONFIG_TCG_VTPM_PROXY=m CONFIG_TCG_TIS_ST33ZP24=m CONFIG_TCG_TIS_ST33ZP24_I2C=m CONFIG_TCG_TIS_ST33ZP24_SPI=m @@ -4333,6 +4368,7 @@ CONFIG_DEVFREQ_THERMAL=y # CONFIG_THERMAL_EMULATION is not set # CONFIG_HISI_THERMAL is not set CONFIG_IMX_THERMAL=m +CONFIG_QORIQ_THERMAL=m CONFIG_SPEAR_THERMAL=y CONFIG_ROCKCHIP_THERMAL=m CONFIG_RCAR_THERMAL=m @@ -5395,6 +5431,7 @@ CONFIG_DRM_IMX_LDB=m CONFIG_DRM_IMX_IPUV3=m CONFIG_DRM_IMX_HDMI=m CONFIG_DRM_VC4=m +CONFIG_DRM_HISI_HIBMC=m # # Frame buffer Devices @@ -5793,6 +5830,7 @@ CONFIG_SND_SOC_ROCKCHIP_I2S=m CONFIG_SND_SOC_ROCKCHIP_SPDIF=m CONFIG_SND_SOC_ROCKCHIP_MAX98090=m CONFIG_SND_SOC_ROCKCHIP_RT5645=m +# CONFIG_SND_SOC_RK3399_GRU_SOUND is not set CONFIG_SND_SOC_SAMSUNG=m CONFIG_SND_SAMSUNG_PCM=m CONFIG_SND_SAMSUNG_SPDIF=m @@ -6206,6 +6244,7 @@ CONFIG_USB_DWC3_OMAP=m CONFIG_USB_DWC3_EXYNOS=m CONFIG_USB_DWC3_PCI=m CONFIG_USB_DWC3_KEYSTONE=m +CONFIG_USB_DWC3_OF_SIMPLE=m CONFIG_USB_DWC3_ST=m CONFIG_USB_DWC3_QCOM=m CONFIG_USB_DWC2=m @@ -6468,6 +6507,7 @@ CONFIG_MMC_SUNXI=m # CONFIG_MMC_TOSHIBA_PCI is not set CONFIG_MMC_BCM2835_SDHOST=m CONFIG_MMC_MTK=m +CONFIG_MMC_SDHCI_XENON=m CONFIG_MEMSTICK=m # CONFIG_MEMSTICK_DEBUG is not set @@ -6728,7 +6768,6 @@ CONFIG_MX3_IPU=y CONFIG_MX3_IPU_IRQS=4 CONFIG_NBPFAXI_DMA=m CONFIG_PL330_DMA=y -CONFIG_QCOM_BAM_DMA=m CONFIG_SIRF_DMA=m CONFIG_STE_DMA40=y CONFIG_TEGRA20_APB_DMA=y @@ -6736,6 +6775,9 @@ CONFIG_TI_CPPI41=m CONFIG_TI_DMA_CROSSBAR=y CONFIG_TI_EDMA=y CONFIG_XILINX_VDMA=m +CONFIG_QCOM_BAM_DMA=m +CONFIG_QCOM_HIDMA_MGMT=m +CONFIG_QCOM_HIDMA=m CONFIG_DW_DMAC_CORE=m CONFIG_DW_DMAC=m # CONFIG_DW_DMAC_PCI is not set @@ -6754,6 +6796,12 @@ CONFIG_SUDMAC=m CONFIG_ASYNC_TX_DMA=y # CONFIG_DMATEST is not set CONFIG_DMA_ENGINE_RAID=y + +# +# DMABUF options +# +CONFIG_SYNC_FILE=y +# CONFIG_SW_SYNC is not set CONFIG_AUXDISPLAY=y CONFIG_KS0108=m CONFIG_KS0108_PORT=0x378 @@ -7119,6 +7167,7 @@ CONFIG_ARM_MHU=m CONFIG_PL320_MBOX=y CONFIG_OMAP2PLUS_MBOX=m CONFIG_OMAP_MBOX_KFIFO_SIZE=256 +CONFIG_ROCKCHIP_MBOX=y CONFIG_ALTERA_MBOX=m CONFIG_BCM2835_MBOX=y CONFIG_STI_MBOX=m @@ -7132,6 +7181,8 @@ CONFIG_IOMMU_SUPPORT=y CONFIG_IOMMU_IO_PGTABLE=y CONFIG_IOMMU_IO_PGTABLE_LPAE=y # CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set +CONFIG_IOMMU_IO_PGTABLE_ARMV7S=y +# CONFIG_IOMMU_IO_PGTABLE_ARMV7S_SELFTEST is not set CONFIG_OF_IOMMU=y CONFIG_OMAP_IOMMU=y CONFIG_OMAP_IOMMU_DEBUG=y @@ -7178,6 +7229,7 @@ CONFIG_QCOM_PM=y CONFIG_QCOM_SMEM=m CONFIG_QCOM_SMD=m CONFIG_QCOM_SMD_RPM=m +CONFIG_ROCKCHIP_GRF=y CONFIG_ROCKCHIP_PM_DOMAINS=y CONFIG_SUNXI_SRAM=y CONFIG_SOC_TI=y @@ -7198,8 +7250,10 @@ CONFIG_DEVFREQ_GOV_USERSPACE=m # CONFIG_ARM_EXYNOS5_BUS_DEVFREQ=y CONFIG_ARM_TEGRA_DEVFREQ=m +# CONFIG_ARM_RK3399_DMC_DEVFREQ is not set CONFIG_PM_DEVFREQ_EVENT=y CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU=y +CONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI=m CONFIG_EXTCON=m # @@ -7517,6 +7571,8 @@ CONFIG_PWM_TWL_LED=m CONFIG_PWM_VT8500=m CONFIG_IRQCHIP=y CONFIG_ARM_GIC=y +CONFIG_ARM_GIC_MAX_NR=1 +CONFIG_ARM_GIC_V2M=y CONFIG_ARM_GIC_V3=y CONFIG_ARM_VIC=y CONFIG_ARM_VIC_NR=4 @@ -7577,6 +7633,11 @@ CONFIG_PHY_EXYNOS5_USBDRD=m CONFIG_PHY_QCOM_APQ8064_SATA=m CONFIG_PHY_QCOM_IPQ806X_SATA=m CONFIG_PHY_ROCKCHIP_USB=m +CONFIG_PHY_ROCKCHIP_INNO_USB2=m +CONFIG_PHY_ROCKCHIP_EMMC=m +CONFIG_PHY_ROCKCHIP_DP=m +CONFIG_PHY_ROCKCHIP_PCIE=m +CONFIG_PHY_ROCKCHIP_TYPEC=m CONFIG_PHY_ST_SPEAR1310_MIPHY=y CONFIG_PHY_ST_SPEAR1340_MIPHY=y CONFIG_PHY_STIH407_USB=m @@ -7613,8 +7674,10 @@ CONFIG_STM_SOURCE_CONSOLE=y # FPGA Configuration Support # CONFIG_FPGA=m +CONFIG_FPGA_REGION=m CONFIG_FPGA_MGR_SOCFPGA=m CONFIG_FPGA_MGR_ZYNQ_FPGA=m +CONFIG_FPGA_BRIDGE=m # # Firmware Drivers @@ -7625,6 +7688,7 @@ CONFIG_FIRMWARE_MEMMAP=y CONFIG_RASPBERRYPI_FIRMWARE=y CONFIG_QCOM_SCM=y CONFIG_QCOM_SCM_32=y +CONFIG_HAVE_ARM_SMCCC=y # CONFIG_BCM47XX_NVRAM is not set # @@ -8256,11 +8320,13 @@ CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_RNG_DEFAULT=m -CONFIG_CRYPTO_PCOMP=m -CONFIG_CRYPTO_PCOMP2=y CONFIG_CRYPTO_AKCIPHER2=y CONFIG_CRYPTO_AKCIPHER=y +CONFIG_CRYPTO_KPP2=y +CONFIG_CRYPTO_KPP=m +CONFIG_CRYPTO_ACOMP2=y CONFIG_CRYPTO_RSA=m +CONFIG_CRYPTO_DH=m CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_USER=m @@ -8353,7 +8419,6 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=y CONFIG_CRYPTO_842=m CONFIG_CRYPTO_LZ4=m @@ -8385,10 +8450,11 @@ CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE=9 # CONFIG_CRYPTO_DEV_FSL_CAAM_INTC is not set CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API=m CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API=m +CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API=m CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API=m CONFIG_CRYPTO_DEV_FSL_CAAM_IMX=y -CONFIG_CRYPTO_DEV_FSL_CAAM_LE=y # CONFIG_CRYPTO_DEV_FSL_CAAM_DEBUG is not set +CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC=m CONFIG_CRYPTO_DEV_OMAP_SHAM=m CONFIG_CRYPTO_DEV_OMAP_AES=m CONFIG_CRYPTO_DEV_OMAP_DES=m @@ -8401,6 +8467,7 @@ CONFIG_CRYPTO_DEV_UX500_HASH=m CONFIG_CRYPTO_DEV_MXS_DCP=m CONFIG_CRYPTO_DEV_QCE=m CONFIG_CRYPTO_DEV_SUN4I_SS=m +CONFIG_CRYPTO_DEV_ROCKCHIP=m CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y CONFIG_PUBLIC_KEY_ALGO_RSA=y @@ -8525,5 +8592,7 @@ CONFIG_FONT_8x16=y # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set # CONFIG_SG_SPLIT is not set +CONFIG_SG_POOL=y CONFIG_ARCH_HAS_SG_CHAIN=y +CONFIG_SBITMAP=y CONFIG_VIRTUALIZATION=y diff --git a/config/armv7hl/lpae b/config/armv7hl/lpae index 14a95eb..0c98f88 100644 --- a/config/armv7hl/lpae +++ b/config/armv7hl/lpae @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/arm 4.4.38 Kernel Configuration +# Linux/arm 4.4.70 Kernel Configuration # CONFIG_ARM=y CONFIG_ARM_HAS_SG_CHAIN=y @@ -78,6 +78,7 @@ CONFIG_HANDLE_DOMAIN_IRQ=y # CONFIG_IRQ_DOMAIN_DEBUG is not set CONFIG_IRQ_FORCED_THREADING=y CONFIG_SPARSE_IRQ=y +CONFIG_ARCH_CLOCKSOURCE_DATA=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_ARCH_HAS_TICK_BROADCAST=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y @@ -182,6 +183,8 @@ CONFIG_SYSFS_SYSCALL=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set +CONFIG_KALLSYMS_BASE_RELATIVE=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y @@ -215,6 +218,7 @@ CONFIG_SLAB=y # CONFIG_SYSTEM_DATA_VERIFICATION is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y +CONFIG_CRASH_CORE=y CONFIG_KEXEC_CORE=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y @@ -231,7 +235,6 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_GENERIC_IDLE_POLL_SETUP=y @@ -284,8 +287,12 @@ CONFIG_LBDAF=y CONFIG_BLK_DEV_BSG=y CONFIG_BLK_DEV_BSGLIB=y CONFIG_BLK_DEV_INTEGRITY=y +CONFIG_BLK_DEV_ZONED=y CONFIG_BLK_DEV_THROTTLING=y # CONFIG_BLK_CMDLINE_PARSER is not set +CONFIG_BLK_WBT=y +# CONFIG_BLK_WBT_SQ is not set +CONFIG_BLK_WBT_MQ=y # # Partition Types @@ -311,6 +318,7 @@ CONFIG_KARMA_PARTITION=y CONFIG_EFI_PARTITION=y CONFIG_SYSV68_PARTITION=y # CONFIG_CMDLINE_PARTITION is not set +CONFIG_BLK_MQ_PCI=y # # IO Schedulers @@ -679,6 +687,7 @@ CONFIG_PCI_KEYSTONE=y CONFIG_PCI_LAYERSCAPE=y CONFIG_PCIE_IPROC=y # CONFIG_PCIE_ALTERA is not set +CONFIG_PCIE_ROCKCHIP=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y # CONFIG_PCIE_ECRC is not set @@ -804,6 +813,7 @@ CONFIG_KEXEC=y CONFIG_ATAGS_PROC=y CONFIG_CRASH_DUMP=y CONFIG_AUTO_ZRELADDR=y +# CONFIG_EFI is not set # # CPU Power Management @@ -831,6 +841,7 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y # CPU frequency scaling drivers # CONFIG_CPUFREQ_DT=m +CONFIG_CPUFREQ_DT_PLATDEV=y CONFIG_ARM_BIG_LITTLE_CPUFREQ=y CONFIG_ARM_DT_BL_CPUFREQ=m CONFIG_ARM_VEXPRESS_SPC_CPUFREQ=y @@ -1523,7 +1534,6 @@ CONFIG_OPENVSWITCH_GRE=m CONFIG_OPENVSWITCH_VXLAN=m CONFIG_OPENVSWITCH_GENEVE=m CONFIG_VSOCKETS=m -CONFIG_NETLINK_MMAP=y CONFIG_NETLINK_DIAG=m CONFIG_MPLS=y CONFIG_NET_MPLS_GSO=m @@ -1765,6 +1775,8 @@ CONFIG_NET_9P_VIRTIO=m # CONFIG_CEPH_LIB is not set # CONFIG_NFC is not set CONFIG_LWTUNNEL=y +CONFIG_NET_DEVLINK=m +CONFIG_MAY_USE_DEVLINK=m CONFIG_HAVE_BPF_JIT=y # @@ -2065,7 +2077,15 @@ CONFIG_MG_DISK_RES=0 CONFIG_VIRTIO_BLK=m # CONFIG_BLK_DEV_RBD is not set # CONFIG_BLK_DEV_RSXX is not set +CONFIG_NVME_CORE=m # CONFIG_BLK_DEV_NVME is not set +# CONFIG_BLK_DEV_NVME_SCSI is not set +CONFIG_NVME_FABRICS=m +CONFIG_NVME_FC=m +CONFIG_NVME_TARGET=m +CONFIG_NVME_TARGET_LOOP=m +CONFIG_NVME_TARGET_FC=m +# CONFIG_NVME_TARGET_FCLOOP is not set # # Misc devices @@ -2384,7 +2404,7 @@ CONFIG_BLK_DEV_DM=m # CONFIG_DM_MQ_DEFAULT is not set # CONFIG_DM_DEBUG is not set CONFIG_DM_BUFIO=m -# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set +# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set CONFIG_DM_BIO_PRISON=m CONFIG_DM_PERSISTENT_DATA=m CONFIG_DM_CRYPT=m @@ -2511,6 +2531,7 @@ CONFIG_ALTERA_TSE=m CONFIG_NET_VENDOR_AMD=y # CONFIG_AMD8111_ETH is not set # CONFIG_PCNET32 is not set +# CONFIG_AMD_XGBE_HAVE_ECC is not set CONFIG_NET_VENDOR_ARC=y CONFIG_ARC_EMAC_CORE=m CONFIG_ARC_EMAC=m @@ -2538,6 +2559,7 @@ CONFIG_BCMGENET=m CONFIG_SYSTEMPORT=m CONFIG_BNXT=m CONFIG_BNXT_SRIOV=y +CONFIG_BNXT_DCB=y CONFIG_NET_VENDOR_BROCADE=y # CONFIG_BNA is not set CONFIG_NET_CALXEDA_XGMAC=m @@ -2609,6 +2631,7 @@ CONFIG_NET_VENDOR_I825XX=y # CONFIG_JME is not set CONFIG_NET_VENDOR_MARVELL=y CONFIG_MVMDIO=m +# CONFIG_MVNETA_BM is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set CONFIG_NET_VENDOR_MELLANOX=y @@ -2651,6 +2674,7 @@ CONFIG_NET_VENDOR_QLOGIC=y # CONFIG_QED is not set CONFIG_NET_VENDOR_QUALCOMM=y CONFIG_QCA7000=m +CONFIG_QCOM_EMAC=m CONFIG_NET_VENDOR_REALTEK=y # CONFIG_8139CP is not set # CONFIG_8139TOO is not set @@ -2670,7 +2694,10 @@ CONFIG_NET_VENDOR_SILAN=y CONFIG_NET_VENDOR_SIS=y # CONFIG_SIS900 is not set # CONFIG_SIS190 is not set +CONFIG_NET_VENDOR_SOLARFLARE=y # CONFIG_SFC is not set +CONFIG_SFC_FALCON=m +CONFIG_SFC_FALCON_MTD=y CONFIG_NET_VENDOR_SMSC=y CONFIG_SMC91X=m # CONFIG_EPIC100 is not set @@ -2747,7 +2774,7 @@ CONFIG_MICREL_PHY=m CONFIG_DP83848_PHY=m CONFIG_DP83867_PHY=m CONFIG_MICROCHIP_PHY=m -CONFIG_FIXED_PHY=m +CONFIG_FIXED_PHY=y CONFIG_MDIO_BITBANG=m CONFIG_MDIO_GPIO=m # CONFIG_MDIO_SUN4I is not set @@ -2755,7 +2782,6 @@ CONFIG_MDIO_BUS_MUX=m CONFIG_MDIO_BUS_MUX_GPIO=m CONFIG_MDIO_BUS_MUX_MMIOREG=m # CONFIG_MDIO_BCM_UNIMAC is not set -# CONFIG_MDIO_XGENE is not set # CONFIG_MICREL_KS8995MA is not set CONFIG_PLIP=m CONFIG_PPP=m @@ -3499,6 +3525,8 @@ CONFIG_SERIAL_FSL_LPUART_CONSOLE=y # CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set # CONFIG_SERIAL_ST_ASC is not set # CONFIG_SERIAL_STM32 is not set +CONFIG_SERIAL_MVEBU_UART=y +CONFIG_SERIAL_MVEBU_CONSOLE=y # CONFIG_TTY_PRINTK is not set CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set @@ -3528,9 +3556,13 @@ CONFIG_R3964=m CONFIG_RAW_DRIVER=m CONFIG_MAX_RAW_DEVS=4096 CONFIG_TCG_TPM=y +CONFIG_TCG_TIS_CORE=m +CONFIG_TCG_TIS=m +CONFIG_TCG_TIS_SPI=m CONFIG_TCG_TIS_I2C_ATMEL=m CONFIG_TCG_TIS_I2C_INFINEON=m CONFIG_TCG_TIS_I2C_NUVOTON=m +CONFIG_TCG_VTPM_PROXY=m CONFIG_TCG_TIS_ST33ZP24=m CONFIG_TCG_TIS_ST33ZP24_I2C=m CONFIG_TCG_TIS_ST33ZP24_SPI=m @@ -4159,6 +4191,7 @@ CONFIG_DEVFREQ_THERMAL=y # CONFIG_THERMAL_EMULATION is not set # CONFIG_HISI_THERMAL is not set CONFIG_IMX_THERMAL=m +CONFIG_QORIQ_THERMAL=m CONFIG_ROCKCHIP_THERMAL=m CONFIG_RCAR_THERMAL=m CONFIG_BCM2835_THERMAL=m @@ -5165,6 +5198,7 @@ CONFIG_DRM_NXP_PTN3460=m CONFIG_DRM_PARADE_PS8622=m # CONFIG_DRM_STI is not set CONFIG_DRM_VC4=m +CONFIG_DRM_HISI_HIBMC=m # # Frame buffer Devices @@ -5530,6 +5564,7 @@ CONFIG_SND_SOC_ROCKCHIP_I2S=m CONFIG_SND_SOC_ROCKCHIP_SPDIF=m CONFIG_SND_SOC_ROCKCHIP_MAX98090=m CONFIG_SND_SOC_ROCKCHIP_RT5645=m +# CONFIG_SND_SOC_RK3399_GRU_SOUND is not set CONFIG_SND_SOC_SAMSUNG=m CONFIG_SND_SAMSUNG_PCM=m CONFIG_SND_SAMSUNG_SPDIF=m @@ -5912,6 +5947,7 @@ CONFIG_USB_DWC3_OMAP=m CONFIG_USB_DWC3_EXYNOS=m CONFIG_USB_DWC3_PCI=m CONFIG_USB_DWC3_KEYSTONE=m +CONFIG_USB_DWC3_OF_SIMPLE=m CONFIG_USB_DWC3_QCOM=m CONFIG_USB_DWC2=m # CONFIG_USB_DWC2_HOST is not set @@ -6163,6 +6199,7 @@ CONFIG_MMC_SUNXI=m # CONFIG_MMC_TOSHIBA_PCI is not set CONFIG_MMC_BCM2835_SDHOST=m CONFIG_MMC_MTK=m +CONFIG_MMC_SDHCI_XENON=m CONFIG_MEMSTICK=m # CONFIG_MEMSTICK_DEBUG is not set @@ -6410,11 +6447,13 @@ CONFIG_MX3_IPU=y CONFIG_MX3_IPU_IRQS=4 CONFIG_NBPFAXI_DMA=m CONFIG_PL330_DMA=m -CONFIG_QCOM_BAM_DMA=m CONFIG_TEGRA20_APB_DMA=y CONFIG_TI_CPPI41=m CONFIG_TI_DMA_CROSSBAR=y CONFIG_TI_EDMA=y +CONFIG_QCOM_BAM_DMA=m +CONFIG_QCOM_HIDMA_MGMT=m +CONFIG_QCOM_HIDMA=m CONFIG_DW_DMAC_CORE=m CONFIG_DW_DMAC=m # CONFIG_DW_DMAC_PCI is not set @@ -6432,6 +6471,12 @@ CONFIG_SUDMAC=m # CONFIG_ASYNC_TX_DMA=y # CONFIG_DMATEST is not set + +# +# DMABUF options +# +CONFIG_SYNC_FILE=y +# CONFIG_SW_SYNC is not set CONFIG_AUXDISPLAY=y CONFIG_KS0108=m CONFIG_KS0108_PORT=0x378 @@ -6771,6 +6816,7 @@ CONFIG_ARM_MHU=m CONFIG_PL320_MBOX=y CONFIG_OMAP2PLUS_MBOX=m CONFIG_OMAP_MBOX_KFIFO_SIZE=256 +CONFIG_ROCKCHIP_MBOX=y CONFIG_ALTERA_MBOX=m CONFIG_BCM2835_MBOX=y # CONFIG_MAILBOX_TEST is not set @@ -6783,6 +6829,8 @@ CONFIG_IOMMU_SUPPORT=y CONFIG_IOMMU_IO_PGTABLE=y CONFIG_IOMMU_IO_PGTABLE_LPAE=y # CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set +CONFIG_IOMMU_IO_PGTABLE_ARMV7S=y +# CONFIG_IOMMU_IO_PGTABLE_ARMV7S_SELFTEST is not set CONFIG_OF_IOMMU=y CONFIG_OMAP_IOMMU=y CONFIG_OMAP_IOMMU_DEBUG=y @@ -6828,6 +6876,7 @@ CONFIG_QCOM_PM=y CONFIG_QCOM_SMEM=m CONFIG_QCOM_SMD=m CONFIG_QCOM_SMD_RPM=m +CONFIG_ROCKCHIP_GRF=y CONFIG_ROCKCHIP_PM_DOMAINS=y CONFIG_SUNXI_SRAM=y CONFIG_SOC_TI=y @@ -6848,8 +6897,10 @@ CONFIG_DEVFREQ_GOV_USERSPACE=m # CONFIG_ARM_EXYNOS5_BUS_DEVFREQ=y CONFIG_ARM_TEGRA_DEVFREQ=m +# CONFIG_ARM_RK3399_DMC_DEVFREQ is not set CONFIG_PM_DEVFREQ_EVENT=y CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU=y +CONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI=m CONFIG_EXTCON=m # @@ -7156,6 +7207,8 @@ CONFIG_PWM_TWL=m CONFIG_PWM_TWL_LED=m CONFIG_IRQCHIP=y CONFIG_ARM_GIC=y +CONFIG_ARM_GIC_MAX_NR=1 +CONFIG_ARM_GIC_V2M=y CONFIG_ARM_GIC_V3=y CONFIG_OMAP_IRQCHIP=y CONFIG_RENESAS_INTC_IRQPIN=y @@ -7198,6 +7251,11 @@ CONFIG_PHY_EXYNOS5_USBDRD=m CONFIG_PHY_QCOM_APQ8064_SATA=m CONFIG_PHY_QCOM_IPQ806X_SATA=m CONFIG_PHY_ROCKCHIP_USB=m +CONFIG_PHY_ROCKCHIP_INNO_USB2=m +CONFIG_PHY_ROCKCHIP_EMMC=m +CONFIG_PHY_ROCKCHIP_DP=m +CONFIG_PHY_ROCKCHIP_PCIE=m +CONFIG_PHY_ROCKCHIP_TYPEC=m CONFIG_PHY_QCOM_UFS=m # CONFIG_PHY_TUSB1210 is not set CONFIG_POWERCAP=y @@ -7234,7 +7292,9 @@ CONFIG_STM_SOURCE_CONSOLE=y # FPGA Configuration Support # CONFIG_FPGA=m +CONFIG_FPGA_REGION=m # CONFIG_FPGA_MGR_ZYNQ_FPGA is not set +CONFIG_FPGA_BRIDGE=m # # Firmware Drivers @@ -7245,6 +7305,7 @@ CONFIG_FIRMWARE_MEMMAP=y CONFIG_RASPBERRYPI_FIRMWARE=y CONFIG_QCOM_SCM=y CONFIG_QCOM_SCM_32=y +CONFIG_HAVE_ARM_SMCCC=y # # File systems @@ -7875,11 +7936,13 @@ CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_RNG_DEFAULT=m -CONFIG_CRYPTO_PCOMP=m -CONFIG_CRYPTO_PCOMP2=y CONFIG_CRYPTO_AKCIPHER2=y CONFIG_CRYPTO_AKCIPHER=y +CONFIG_CRYPTO_KPP2=y +CONFIG_CRYPTO_KPP=m +CONFIG_CRYPTO_ACOMP2=y CONFIG_CRYPTO_RSA=m +CONFIG_CRYPTO_DH=m CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_USER=m @@ -7972,7 +8035,6 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=y CONFIG_CRYPTO_842=m CONFIG_CRYPTO_LZ4=m @@ -8001,10 +8063,11 @@ CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE=9 # CONFIG_CRYPTO_DEV_FSL_CAAM_INTC is not set CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API=m CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API=m +CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API=m CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API=m CONFIG_CRYPTO_DEV_FSL_CAAM_IMX=y -CONFIG_CRYPTO_DEV_FSL_CAAM_LE=y # CONFIG_CRYPTO_DEV_FSL_CAAM_DEBUG is not set +CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC=m CONFIG_CRYPTO_DEV_OMAP_SHAM=m CONFIG_CRYPTO_DEV_OMAP_AES=m CONFIG_CRYPTO_DEV_OMAP_DES=m @@ -8013,6 +8076,7 @@ CONFIG_CRYPTO_DEV_S5P=m CONFIG_CRYPTO_DEV_MXS_DCP=m CONFIG_CRYPTO_DEV_QCE=m CONFIG_CRYPTO_DEV_SUN4I_SS=m +CONFIG_CRYPTO_DEV_ROCKCHIP=m CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y CONFIG_PUBLIC_KEY_ALGO_RSA=y @@ -8137,10 +8201,15 @@ CONFIG_FONT_8x16=y # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set # CONFIG_SG_SPLIT is not set +CONFIG_SG_POOL=y CONFIG_ARCH_HAS_SG_CHAIN=y +CONFIG_SBITMAP=y +CONFIG_HAVE_KVM_IRQCHIP=y CONFIG_HAVE_KVM_IRQFD=y +CONFIG_HAVE_KVM_IRQ_ROUTING=y CONFIG_HAVE_KVM_EVENTFD=y CONFIG_KVM_MMIO=y +CONFIG_HAVE_KVM_MSI=y CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y CONFIG_KVM_VFIO=y CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y diff --git a/config/armv7hl/vanilla b/config/armv7hl/vanilla index 8a333fd..fa0381a 100644 --- a/config/armv7hl/vanilla +++ b/config/armv7hl/vanilla @@ -1,4 +1,11 @@ +# CONFIG_AHCI_BRCMSTB is not set +CONFIG_CRYPTO_DEV_FSL_CAAM_LE=y +CONFIG_CRYPTO_PCOMP=m +CONFIG_CRYPTO_PCOMP2=y +CONFIG_CRYPTO_ZLIB=m CONFIG_DM_CACHE_MQ=m +# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set +CONFIG_HAVE_DMA_ATTRS=y CONFIG_LOCALVERSION="-vanilla" # CONFIG_SATA_RCAR is not set CONFIG_MODULES=y -- 2.1.4 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 1