Hallo Tobias Becker, vielen Dank für die Anteilnahme an meinem Zeit-Problem! On Sat, 5 Jun 2004, Tobias Becker wrote:
- Sigward Funke <sfunke@server1.rz.uni-leipzig.de> schrieb:
Jun 3 17:35:39 dolly isdnlog: Everything is fine, isdnlog-4.59 is running in full featured mode. Jun 3 17:35:53 dolly isdnlog: (HiSax driver detected) ^^^^^^^^^^^^^^^^^^^^^^^ Die letzte Zeile ist die erste Antwort auf eine ausgehende Verbindung.
Da sollten eigentlich Meldungen über den Verbindungsaufbau stehen, sofern Du diese nicht ausdrücklich wegkonfiguriert hast.
Gut, zwischen die isdnlog-Meldungen mischen sich tatsächlich noch zahlreiche Kernel-Meldungen, die ich jedoch für unverdächtig halte. Später finde ich bisher unbekannte Meldungen mit "No HW description found" - hilft das vielleicht weiter? Noch zur Erläuterung: Ich habe fünf ISDN-Devices konfiguriert (icll, igunz, ineub, itann und iwerd), die beim Starten des ISDN-Systems alle erstmal eine Verbindung aufbauen wollen, was aber nur für die ersten beiden klappt (logisch, wenn nur eine ISDN-Karte vorhanden ist). Hier ein lückenloser Auszug aus /var/log/messages: Jun 3 17:35:39 dolly isdnlog: Everything is fine, isdnlog-4.59 is running in full featured mode. Jun 3 17:35:53 dolly kernel: icll: dialing 1 003435xxxxxx... Jun 3 17:35:53 dolly isdnlog: (HiSax driver detected) Jun 3 17:35:53 dolly isdnlog: Jun 03 17:35:53 * tei 66 calling +49 3435/xxxxxx, Oschatz with +49 341/97xMSNx, Leipzig RING (Data) Jun 3 17:35:53 dolly kernel: igunz: dialing 1 0037464xxxxxx... Jun 3 17:35:53 dolly isdnlog: Jun 03 17:35:53 * tei 66 calling +49 37464/xxxxxx, Schöneck with +49 341/97xMSNx, Leipzig RING (Data) Jun 3 17:35:53 dolly kernel: isdn_net: itann: No channel, signalling dst_link_failure Protocol != ETH_P_IP Jun 3 17:35:54 dolly kernel: isdn_net: iwerd: No channel, signalling dst_link_failure Protocol != ETH_P_IP Jun 3 17:35:54 dolly kernel: isdn_net: ineub: No channel, signalling dst_link_failure Protocol != ETH_P_IP ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Das sind altbekannte Fehlermeldungen, vermutlich weil für itann, iwerd, ineub keine B-Kanäle frei ist. Jun 3 17:35:56 dolly kernel: isdn_net: icll connected Jun 3 17:35:56 dolly isdnlog: Jun 03 17:35:56 tei 66 calling ? with ? CHARGING I 0.12 Jun 3 17:35:56 dolly isdnlog: Jun 03 17:35:56 tei 66 calling xMSNx with ? COLP 11843 Jun 3 17:35:56 dolly isdnlog: Jun 03 17:35:56 tei 66 calling xMSNx with ? CONNECT Jun 3 17:35:56 dolly isdnlog: Jun 03 17:35:56 tei 66 calling xMSNx with ? No area info for provider 33_0 (18), destination xMSNx Jun 3 17:35:56 dolly kernel: isdn_net: igunz connected Jun 3 17:35:56 dolly isdnlog: Jun 03 17:35:56 tei 66 calling ? with ? CHARGING I 0.12 Jun 3 17:35:56 dolly isdnlog: Jun 03 17:35:56 tei 66 calling xMSNx with ? COLP 11843 Jun 3 17:35:56 dolly isdnlog: Jun 03 17:35:56 tei 66 calling xMSNx with ? CONNECT Jun 3 17:35:56 dolly isdnlog: Jun 03 17:35:56 tei 66 calling xMSNx with ? No area info for provider 33_0 (18), destination xMSNx Jun 3 17:35:57 dolly kernel: isdn_net: itann: No channel, signalling dst_link_failure Protocol != ETH_P_IP Jun 3 17:35:58 dolly kernel: isdn_net: iwerd: No channel, signalling dst_link_failure Protocol != ETH_P_IP Jun 3 17:35:58 dolly kernel: isdn_net: ineub: No channel, signalling dst_link_failure Protocol != ETH_P_IP Jun 3 17:36:00 dolly /USR/SBIN/CRON[14523]: (sysop) CMD (/home/sysop/bin/check_seiscomp check > /dev/null 2>&1) Jun 3 17:36:01 dolly /etc/hotplug/net.agent[14294]: No HW description found ... exiting ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Diese Fehlermeldung ist neu - könnte sie was mit isdnlog und der Zeitsynchronisierung zu tun haben? Jun 3 17:36:01 dolly kernel: isdn_net: itann: No channel, signalling dst_link_failure Protocol != ETH_P_IP Jun 3 17:36:01 dolly /etc/hotplug/net.agent[14335]: No HW description found ... exiting Jun 3 17:36:02 dolly /etc/hotplug/net.agent[14376]: No HW description found ... exiting Jun 3 17:36:02 dolly kernel: isdn_net: iwerd: No channel, signalling dst_link_failure Protocol != ETH_P_IP Jun 3 17:36:02 dolly /etc/hotplug/net.agent[14417]: No HW description found ... exiting Jun 3 17:36:02 dolly kernel: isdn_net: ineub: No channel, signalling dst_link_failure Protocol != ETH_P_IP Jun 3 17:36:02 dolly /etc/hotplug/net.agent[14458]: No HW description found ... exiting Jun 3 17:36:02 dolly kernel: icll: no IPv6 routers present Jun 3 17:36:02 dolly kernel: igunz: no IPv6 routers present Jun 3 17:36:02 dolly kernel: itann: no IPv6 routers present Jun 3 17:36:03 dolly kernel: iwerd: no IPv6 routers present Jun 3 17:36:03 dolly kernel: ineub: no IPv6 routers present Jun 3 17:36:06 dolly isdnlog: Jun 03 17:36:06 tei 66 calling xMSNx with ? Normal call clearing (User) Jun 3 17:36:06 dolly kernel: isdn_net: local hangup icll Jun 3 17:36:06 dolly kernel: icll: Chargesum is 0 Jun 3 17:36:06 dolly kernel: isdn: fcpcipnp0,ch0 cause: E0010 Jun 3 17:36:06 dolly isdnlog: Jun 03 17:36:06 tei 66 calling xMSNx with ? Normal call clearing (User) Jun 3 17:36:06 dolly isdnlog: Jun 03 17:36:06 tei 66 calling xMSNx with ? HANGUP ( 0:00:10) Jun 3 17:36:07 dolly isdnlog: Jun 03 17:36:07 tei 66 calling xMSNx with ? Normal call clearing (User) Jun 3 17:36:07 dolly kernel: isdn_net: local hangup igunz Jun 3 17:36:07 dolly kernel: igunz: Chargesum is 0 Jun 3 17:36:07 dolly kernel: isdn: fcpcipnp0,ch1 cause: E0010 Jun 3 17:36:07 dolly isdnlog: Jun 03 17:36:07 tei 66 calling xMSNx with ? Normal call clearing (User) Jun 3 17:36:07 dolly isdnlog: Jun 03 17:36:07 tei 66 calling xMSNx with ? HANGUP ( 0:00:11) Soweit der etwas längliche Auszug aus /var/log/messages. Beim Googlen nach "No HW description found" und isdn bin ich auch nicht viel schlauer geworden. Immerhin habe ich den Tip für ein i4l-Update gefunden - das nehme ich mir als Nächstes vor. Online ist die Version 2002.7.31 zu haben, installiert ist aktuell 2002.3.25-3.
Listet ein Aufruf von isdnrep die bereits am selben Tag getätigten Verbindungen auf?
Ja, sieht plausibel aus.
Falls nicht, ist mit gewisser Wahrscheinlichkeit die D-Kanal-Ausgabe nicht aktiviert, "hisaxctrl contr0 1 4" sollte dann helfen.
Hat sich ja wohl erübrigt. Nochmals vielen Dank, immerhin habe ich mit "No HW description found" eine neue Spur, auch wenn das Problem noch nicht gelöst ist. Sigward Funke -- Sigward Funke Institut fuer Geophysik und Geologie Tel. 0341 97-32816 Universitaet Leipzig Fax. 0341 97-32809 Talstr. 35, 04103 Leipzig E-mail: sfunke@rz.uni-leipzig.de Raum 2-15