Hallo Liste, ich quäle mich nun schon länger mit einem Problem und komme nicht weiter... SuSE 9.1 pro Fritz DSL 2.0 t-online flat mit Zwangstrennung das ganze auf einem VIA EPIA Mainboard als I-Net Gateway. Habe mit Yast alles konfiguriert, Einwahl klappt auch ganz gut. ABER: Nach der Zwangstrennung kommt es manchmal zur Wiedereinwahl, manchmal nicht. SMPPPD scheint dann zu stoppen. Warum er das tut weiss ich nicht, bei anderen gehts doch auch oder? Ach ja "persist" in /etc/ppp/options eintragen hat leider auch nicht geholfen. DoD ist auch "an". Ich bin noch relativ neu in der Linuxwelt, also nicht hauen. Habe auch schon gegoogelt, aber nichts gefunden, ausser Skripten die den SMPPPD durchstarten, aber das kann es doch nicht sein oder? Ausserdem weiss ich auch nicht wirklich wie ich so ein Skript einbinden muss... -- Best regards, Paul Vogt mailto:paul.vogt@gmx.de Hier mal ein LOG (KINTERNET mit DEBUG OPTION)bei dem der Reconnect nicht klappt: ----schnipp----- SuSE Meta pppd (smpppd-ifcfg), Version 1.16 on linux. Status is: disconnected trying to connect to smpppd connect to smpppd Status is: disconnected debug: starting <logfd> <7> <call> <capi-adsl> <mtu> <1492> <mru> <1492> <192.168.99.1:192.168.99.99> <ipcp-accept-local> <ipcp-accept-remote> <demand> <idle> <0> <defaultroute> <replacedefaultroute> <nodetach> <ipparam> <'ifcfg-dsl0' 'tonline-dsl'> <user> <0002348718063100715574500001@t-online.de> <passwordfd> <8> Status is: lurking pppd[0]: Plugin capiplugin.so loaded. pppd[0]: capiplugin: $Revision: 1.33 $ pppd[0]: capiconn: 1.8 pppd[0]: Plugin passwordfd.so loaded. pppd[0]: pppd options in effect: pppd[0]: debug # (from command line) pppd[0]: nodetach # (from command line) pppd[0]: idle 0 # (from command line) pppd[0]: demand # (from command line) pppd[0]: logfd 7 # (from command line) pppd[0]: dump # (from command line) pppd[0]: plugin capiplugin.so # (from /etc/ppp/peers/capi-adsl) pppd[0]: plugin passwordfd.so # (from /etc/ppp/peers/capi-adsl) pppd[0]: active-filter xxx # [don't know how to print value] # (from /etc/ppp/filters) pppd[0]: noauth # (from /etc/ppp/peers/capi-adsl) pppd[0]: user meineUserID@t-online.de # (from command line) pppd[0]: pass[....] # (from command line) pppd[0]: avmadsl # (from /etc/ppp/peers/capi-adsl) pppd[0]: /dev/null # (from /etc/ppp/peers/capi-adsl) pppd[0]: lock # (from /etc/ppp/options) pppd[0]: connect # (from /etc/ppp/peers/capi-adsl) pppd[0]: crtscts # (from /etc/ppp/options) pppd[0]: modem # (from /etc/ppp/options) pppd[0]: sync # (from /etc/ppp/peers/capi-adsl) pppd[0]: asyncmap 0 # (from /etc/ppp/options) pppd[0]: mru 1492 # (from command line) pppd[0]: mtu 1492 # (from command line) pppd[0]: lcp-echo-failure 4 # (from /etc/ppp/options) pppd[0]: lcp-echo-interval 30 # (from /etc/ppp/options) pppd[0]: lcp-restart 2 # (from /etc/ppp/options) pppd[0]: lcp-max-configure 60 # (from /etc/ppp/options) pppd[0]: ipcp-accept-local # (from command line) pppd[0]: ipcp-accept-remote # (from command line) pppd[0]: ipparam 'ifcfg-dsl0' 'tonline-dsl' # (from command line) pppd[0]: noipdefault # (from /etc/ppp/options) pppd[0]: defaultroute # (from command line) pppd[0]: replacedefaultroute # (from command line) pppd[0]: 192.168.99.1:192.168.99.99 # (from command line) pppd[0]: noccp # (from /etc/ppp/peers/capi-adsl) pppd[0]: noipx # (from /etc/ppp/peers/capi-adsl) pppd[0]: Using interface ppp0 Status is: lurking pppd[0]: local IP address 192.168.99.1 pppd[0]: remote IP address 192.168.99.99 pppd[0]: capiplugin: phase dormant. pppd[0]: loading adsl parameters from /etc/drdsl/adsl.conf ... pppd[0]: capiplugin: contr=2 pppd[0]: controller 2: listen_change_state 0 -> 1 pppd[0]: contr 2: listenconf Info=0x0000 (No additional information) infomask=0x145 cipmask=0x0 capimask2=0x0 pppd[0]: controller 2: listen_change_state 1 -> 0 pppd[0]: Starting link Establishing connection due to activity. Status is: connecting pppd[0]: capiplugin: phase serialconn (was dormant). pppd[0]: plci_change_state:0x0 0 -> 1 event=1 pppd[0]: capiplugin: leased line (adslpppoe) pppd[0]: plci_change_state:0x102 1 -> 2 event=3 pppd[0]: plci_change_state:0x102 2 -> 3 event=6 pppd[0]: ncci_change_state:0x102 0 -> 1 event=1 pppd[0]: ncci_change_state:0x10102 1 -> 3 event=3 pppd[0]: ncci_change_state:0x10102 3 -> 7 event=10 pppd[0]: ncci_change_state:0x10102 7 -> 0 event=13 pppd[0]: plci_change_state:0x102 3 -> 7 event=8 pppd[0]: plci_change_state:0x102 7 -> 8 event=9 pppd[0]: plci_change_state:0x102 8 -> 0 event=11 pppd[0]: capiplugin: disconnect(remote): "" -> "" outgoing (pcli=0x102/ncci=0x10102) 0x0000 (0x3312) - No additional information pppd[0]: plci_change_state:0x0 0 -> 1 event=1 pppd[0]: capiplugin: leased line (adslpppoe) pppd[0]: plci_change_state:0x102 1 -> 2 event=3 pppd[0]: plci_change_state:0x102 2 -> 3 event=6 pppd[0]: ncci_change_state:0x102 0 -> 1 event=1 pppd[0]: ncci_change_state:0x10102 1 -> 3 event=3 pppd[0]: ncci_change_state:0x10102 3 -> 7 event=10 pppd[0]: ncci_change_state:0x10102 7 -> 0 event=13 pppd[0]: plci_change_state:0x102 3 -> 7 event=8 pppd[0]: plci_change_state:0x102 7 -> 8 event=9 pppd[0]: plci_change_state:0x102 8 -> 0 event=11 pppd[0]: capiplugin: disconnect(remote): "" -> "" outgoing (pcli=0x102/ncci=0x10102) 0x0000 (0x3312) - No additional information pppd[0]: plci_change_state:0x0 0 -> 1 event=1 pppd[0]: capiplugin: leased line (adslpppoe) pppd[0]: plci_change_state:0x102 1 -> 2 event=3 pppd[0]: plci_change_state:0x102 2 -> 3 event=6 pppd[0]: ncci_change_state:0x102 0 -> 1 event=1 pppd[0]: ncci_change_state:0x10102 1 -> 3 event=3 pppd[0]: ncci_change_state:0x10102 3 -> 7 event=10 pppd[0]: ncci_change_state:0x10102 7 -> 0 event=13 pppd[0]: plci_change_state:0x102 3 -> 7 event=8 pppd[0]: plci_change_state:0x102 7 -> 8 event=9 pppd[0]: plci_change_state:0x102 8 -> 0 event=11 pppd[0]: capiplugin: disconnect(remote): "" -> "" outgoing (pcli=0x102/ncci=0x10102) 0x0000 (0x3312) - No additional information pppd[0]: plci_change_state:0x0 0 -> 1 event=1 pppd[0]: capiplugin: leased line (adslpppoe) pppd[0]: plci_change_state:0x102 1 -> 2 event=3 pppd[0]: plci_change_state:0x102 2 -> 3 event=6 pppd[0]: ncci_change_state:0x102 0 -> 1 event=1 pppd[0]: ncci_change_state:0x10102 1 -> 3 event=3 pppd[0]: ncci_change_state:0x10102 3 -> 7 event=10 pppd[0]: ncci_change_state:0x10102 7 -> 0 event=13 pppd[0]: plci_change_state:0x102 3 -> 7 event=8 pppd[0]: plci_change_state:0x102 7 -> 8 event=9 pppd[0]: plci_change_state:0x102 8 -> 0 event=11 pppd[0]: capiplugin: disconnect(remote): "" -> "" outgoing (pcli=0x102/ncci=0x10102) 0x0000 (0x3312) - No additional information pppd[0]: capiplugin: couldn't make connection pppd[0]: controller 2: listen_change_state 0 -> 1 pppd[0]: contr 2: listenconf Info=0x0000 (No additional information) infomask=0x145 cipmask=0x0 capimask2=0x0 pppd[0]: controller 2: listen_change_state 1 -> 0 pppd[0]: capiplugin: exit Status is: disconnected pppd[0] died: Fatal pppd error (exit code 1) ----schnapp-----