Sorry für die verspätete Antwort, aber der Rechner steht bei einem Freund.
Mit YaST konfigurierte Geräte sind:
- AVM FRITZ!Card DSL PCI Als contr0 konfiguriert - ISDN-Verbindung Als net0 mit Provider freenet (Protokoll syncppp) konfiguriert
Das ist dann auch eine ISDN Verbindung - keine DSL
Das ist auch so gewünscht.
Das bedeutet das der ipppd nicht laeuft. Was passiert wenn Du als root
rcnetwork start -o type=ippp
machst ?
Nicht besonders aussagekräftig: linux:~ # rcnetwork start -o type=ippp debug rcnetwork [DEBUG] CONFFILES = ippp0 rcnetwork [DEBUG] CONFIG = rcnetwork [DEBUG] INTERFACE = Setting up network interfaces: ippp0 askpassword=yes: rc network cannot start this interface rcnetwork [DEBUG] (returned 5) onboot In der Log-Datei steht gar nichts als Grund. Ich hatte den Rechner frisch installiert, die ISDN-Einrichtung beim Installieren aber übersprungen und erst nachträglich durchgeführt. Was könnte ich denn sonst noch an Analysen durchführen? Vielleicht helfen noch die vorhandenen PCI-Devices: PCI devices found: Bus 0, device 0, function 0: Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge (rev 2). Prefetchable 32 bit memory at 0xf8000000 [0xfbffffff]. Bus 0, device 1, function 0: PCI bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset AGP Bridge (rev 2). Master Capable. Latency=64. Min Gnt=8. Bus 0, device 29, function 0: USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 2). IRQ 5. I/O at 0xd800 [0xd81f]. Bus 0, device 29, function 1: USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 2). IRQ 9. I/O at 0xd400 [0xd41f]. Bus 0, device 29, function 2: USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 2). IRQ 9. I/O at 0xd000 [0xd01f]. Bus 0, device 29, function 7: USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 2). IRQ 11. Non-prefetchable 32 bit memory at 0xf1800000 [0xf18003ff]. Bus 0, device 30, function 0: PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 130). Master Capable. No bursts. Min Gnt=6. Bus 0, device 31, function 0: ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 2). Bus 0, device 31, function 1: IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 2). IRQ 9. I/O at 0xf000 [0xf00f]. Non-prefetchable 32 bit memory at 0x20000000 [0x200003ff]. Bus 0, device 31, function 5: Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio (rev 2). IRQ 9. I/O at 0xb800 [0xb8ff]. I/O at 0xb400 [0xb43f]. Non-prefetchable 32 bit memory at 0xef800000 [0xef8001ff]. Non-prefetchable 32 bit memory at 0xef000000 [0xef0000ff]. Bus 1, device 0, function 0: VGA compatible controller: PCI device 10de:0182 (nVidia Corporation) (rev 162). IRQ 5. Master Capable. Latency=64. Min Gnt=5.Max Lat=1. Non-prefetchable 32 bit memory at 0xf2000000 [0xf2ffffff]. Prefetchable 32 bit memory at 0xf4000000 [0xf7ffffff]. Bus 2, device 5, function 0: Ethernet controller: PCI device 14e4:4401 (Broadcom Corporation) (rev 1). IRQ 10. Master Capable. Latency=32. Non-prefetchable 32 bit memory at 0xf1000000 [0xf1001fff]. Bus 2, device 13, function 0: Multimedia controller: PCI device 1131:5402 (Philips Semiconductors) (rev 131). IRQ 9. Master Capable. Latency=32. Min Gnt=3.Max Lat=1. Non-prefetchable 32 bit memory at 0xf0800000 [0xf0ffffff]. Non-prefetchable 32 bit memory at 0xf0000000 [0xf01fffff]. Tschüß, Thomas -- -------------------------------------------- Thomas Necker EMail: devel@ThomasNecker.de --------------------------------------------