Hallo, ich habe kürzlich mein System auf SuSE 8.1 aufgerüstet und meine Fritz!Card PCI gegen eine Fritz!Card DSL getauscht. Seit dem erscheinen kurz nach der Anwahl meines Providers (1&1) mit ISDN folgende zwei Zeilen im Kernel-Log: Apr 14 22:00:15 router kernel: NETDEV WATCHDOG: ippp0: transmit timed out Apr 14 22:00:15 router kernel: isdn_tx_timeout dev ippp0 dialstate 0 Die Anwahl dauert bedingt durch diesen Fehler 20 Sekunden länger als erforderlich und das erste gesendete Paket geht verloren. Aber danach scheint alles normal zu funktionieren. DSL konnte ich - mangels DSL Anschluß - noch nicht testen. Ich habe die letzten Updates installiert, aber dies hat nichts gebracht: router:~ # rpm -qa | grep i4l capi4linux-2002.11.5-0 i4l-vbox-2002.9.8-4 i4l-isdnlog-2002.11.5-0 i4l-base-2003.2.14-1 "capiinfo" liefert folgenden Output: Number of Controllers : 2 Controller 1: Manufacturer: AVM GmbH CAPI Version: 2.0 Manufacturer Version: 3.16-05 (49.5) Serial Number: 1000001 BChannels: 2 Global Options: 0x00000039 internal controller supported DTMF supported Supplementary Services supported channel allocation supported (leased lines) B1 protocols support: 0x4000011f 64 kbit/s with HDLC framing 64 kbit/s bit-transparent operation V.110 asynconous operation with start/stop byte framing V.110 synconous operation with HDLC framing T.30 modem for fax group 3 Modem asyncronous operation with start/stop byte framing B2 protocols support: 0x00000b1b ISO 7776 (X.75 SLP) Transparent LAPD with Q.921 for D channel X.25 (SAPI 16) T.30 fro fax group 3 ISO 7776 (X.75 SLP) with V.42bis compression V.120 asyncronous mode V.120 bit-transparent mode B3 protocols support: 0x800000bf Transparent T.90NL, T.70NL, T.90 ISO 8208 (X.25 DTE-DTE) X.25 DCE T.30 for fax group 3 reserved .... Controller 2: Manufacturer: AVM GmbH CAPI Version: 2.0 Manufacturer Version: 3.16-05 (49.5) Serial Number: 1000001 BChannels: 1 Global Options: 0x00000001 internal controller supported B1 protocols support: 0x10000000 B2 protocols support: 0x40000002 Transparent B3 protocols support: 0x40000001 Transparent ... Wer kann helfen ? Ciao - Manfred -