Hallo Liste,
nach Update auf SuSE 7.0 habe ich ein Problem bei der
Einwahl zu unserem Provider. Nach dem Start von i4l
funktioniert die Einwahl für eine gewisse Zeit. Dann irgendwann
passiert das folgende:
-----------------------------------------------------------------
Oct 27 13:24:25 snip460 isdnlog: Oct 27 13:24:25 tei 74 calling +49 ....
Oct 27 13:24:25 snip460 kernel: isdn_net: ippp0 connected
Oct 27 13:24:25 snip460 ipppd[4574]: Local number: XXXXX, Remote number:
XXXXX, Type: outgoing
Oct 27 13:24:25 snip460 ipppd[4574]: PHASE_WAIT -> PHASE_ESTABLISHED,
ifunit: 0, linkunit: 1, fd: 9
Oct 27 13:24:25 snip460 ipppd[4574]: sent [1][LCP ConfReq id=0x1
<auth pap> ]
Oct 27 13:24:25 snip460 ipppd[4574]: rcvd [1][LCP ConfReq id=0x33 <auth pap>
]
Oct 27 13:24:25 snip460 ipppd[4574]: rcvd [1][LCP ConfAck id=0x1
<auth pap> ]
Oct 27 13:24:25 snip460 ipppd[4574]: rcvd [1][LCP ConfReq id=0x34 <auth pap>
]
Oct 27 13:24:25 snip460 ipppd[4574]: sent [1][LCP ConfAck id=0x34 <auth pap>
]
Oct 27 13:24:25 snip460 ipppd[4574]: lcp layer is UP
Oct 27 13:24:25 snip460 ipppd[4574]: sent [1][PAP AuthReq id=0xc user="XY"
password not logged for security reasons! Use '+pwlog' optio
Oct 27 13:24:25 snip460 ipppd[4574]: rcvd [1][PAP AuthAck id=0xcmsg=""]
Oct 27 13:24:25 snip460 ipppd[4574]: Remote message:
*** Oct 27 13:24:32 snip460 kernel: isdn_tx_timeout dev ippp0 dialstate 0
***
Oct 27 13:24:52 snip460 last message repeated 4 times
Oct 27 13:24:55 snip460 ipppd[4574]: sent [1][LCP TermReq id=0x2 61 75 74 68
20 66 61 69 6c 75 72 65]
----------------------------------------------------------------------------
--------------------------------
Danach funktioniert die Einwahl nicht mehr bis zu einem restart
von i4l. Kann mir jemand sagen, was das "isdn_tx_timeout"
bedeutet und was ich dagegen tun kann ?
Danke für jeden Hinweis,
Rainer