Keresgéltem, és rájöttem, hogy Márciusban ezt a témát ugyanígy veséztük ki mind a ketten :) Csak akkor USB hub-ról volt szó. Most már mindenképpen keresni kellene egy megoldást, vagy legalább magyarázatot :) Burján Ferenc wrote:
No ez jó hosszú lett:
A dologhoz még írnék pár körülményt. Ez egy clevo alapokon nyugvó Albacomp laptop. USB Hub is ugyan erre a sorsra szokott jutni. Érdekes, hogy a billentyű ritkább hibával működni szokott, ha betolom az USB-be, az egér is.
No a kimenet, de lelőttem egy Ctrl + c -vel, mert nem akar végetérni.
tail -f /var/log/messages Jun 15 22:10:09 linux-rlzp nm-dispatcher.action: Script '/etc/NetworkManager/dispatcher.d/autofs' exited with error status 1. Jun 15 22:10:10 linux-rlzp SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... Jun 15 22:10:10 linux-rlzp SuSEfirewall2: using default zone 'ext' for interface pan0 Jun 15 22:10:10 linux-rlzp SuSEfirewall2: batch committing... Jun 15 22:10:10 linux-rlzp SuSEfirewall2: Firewall rules successfully set Jun 15 22:10:10 linux-rlzp sm-notify[4015]: Already notifying clients; Exiting! Jun 15 22:10:10 linux-rlzp nm-dispatcher.action: Script '/etc/NetworkManager/dispatcher.d/nfs' exited with error status 6. Jun 15 22:10:10 linux-rlzp dbus-daemon: Rejected send message, 12 matched rules; type="method_return", sender=":1.48" (uid=0 pid=3759 comm="/usr/lib/NetworkManager/nm-dispatcher.action ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply=0 destination=":1.8" (uid=0 pid=2848 comm="/usr/sbin/NetworkManager ")) Jun 15 22:10:57 linux-rlzp kernel: process `skype' is using obsolete setsockopt SO_BSDCOMPAT Jun 15 22:12:22 linux-rlzp su: (to root) feri on /dev/pts/1 Jun 15 22:13:02 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:02 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:02 linux-rlzp kernel: usb 4-4: new high speed USB device using ehci_hcd and address 5 Jun 15 22:13:02 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:02 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:02 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:03 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:03 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:03 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:03 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:03 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:04 linux-rlzp kernel: usb 4-4: new high speed USB device using ehci_hcd and address 13 Jun 15 22:13:04 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:04 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:04 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:04 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:05 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:05 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:05 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:05 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:05 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:06 linux-rlzp kernel: usb 4-4: new high speed USB device using ehci_hcd and address 22 Jun 15 22:13:06 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:06 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:06 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:06 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:06 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:07 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:07 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:07 linux-rlzp kernel: usb 4-4: new high speed USB device using ehci_hcd and address 29 Jun 15 22:13:07 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:07 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:07 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:08 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:08 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:08 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:08 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:08 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:09 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:09 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:09 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:09 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:09 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 Jun 15 22:13:09 linux-rlzp kernel: hub 4-0:1.0: unable to enumerate USB device on port 4 ^C
2009. 06. 15, hétfő keltezéssel 21.59-kor "Horváth Gergely J." ezt írta:
Igen, elfelejtettem mondani, hogy ezt a parancsot még úgy add ki, hogy nincs benn az USB. Mikor kiadod a parancsot, akkor nem kapod vissza a terminált, hanem folyamatosan látni fogod az üzeneteket. Ekkor bedugod az USB-t, és látnod kell hirtelen usb-s üzeneteket. Erre vagyunk kiváncsiak :)
Mutatok egy példát:
Jun 15 21:56:04 asus kernel: usb 4-1: new full speed USB device using uhci_hcd and address 2 Jun 15 21:56:04 asus kernel: usb 4-1: not running at top speed; connect to a high speed hub Jun 15 21:56:04 asus kernel: usb 4-1: configuration #1 chosen from 1 choice Jun 15 21:56:04 asus kernel: scsi7 : SCSI emulation for USB Mass Storage devices Jun 15 21:56:04 asus kernel: usb-storage: device found at 2 Jun 15 21:56:04 asus kernel: usb-storage: waiting for device to settle before scanning Jun 15 21:56:04 asus kernel: usb 4-1: New USB device found, idVendor=058f, idProduct=6387 Jun 15 21:56:04 asus kernel: usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 15 21:56:04 asus kernel: usb 4-1: Product: Mass Storage Jun 15 21:56:04 asus kernel: usb 4-1: Manufacturer: Generic Jun 15 21:56:04 asus kernel: usb 4-1: SerialNumber: 1E7FD5BD Jun 15 21:56:05 asus kernel: scsi 7:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 2 Jun 15 21:56:05 asus kernel: sd 7:0:0:0: [sdh] 2058240 512-byte hardware sectors (1054 MB) Jun 15 21:56:05 asus kernel: sd 7:0:0:0: [sdh] Write Protect is off Jun 15 21:56:05 asus kernel: sd 7:0:0:0: [sdh] Mode Sense: 03 00 00 00 Jun 15 21:56:05 asus kernel: sd 7:0:0:0: [sdh] Assuming drive cache: write through Jun 15 21:56:05 asus kernel: sd 7:0:0:0: [sdh] 2058240 512-byte hardware sectors (1054 MB) Jun 15 21:56:05 asus kernel: sd 7:0:0:0: [sdh] Write Protect is off Jun 15 21:56:05 asus kernel: sd 7:0:0:0: [sdh] Mode Sense: 03 00 00 00 Jun 15 21:56:05 asus kernel: sd 7:0:0:0: [sdh] Assuming drive cache: write through Jun 15 21:56:06 asus kernel: sdh: sdh1 Jun 15 21:56:06 asus kernel: sd 7:0:0:0: [sdh] Attached SCSI removable disk Jun 15 21:56:06 asus kernel: sd 7:0:0:0: Attached scsi generic sg10 type 0 Jun 15 21:56:06 asus kernel: usb-storage: device scan complete Jun 15 21:56:06 asus hald: mounted /dev/sdh1 on behalf of uid 1000 Jun 15 21:56:06 asus gnome-keyring-daemon[4494]: adding removable location: volume_uuid_49CB_7AF4 at /media/disk-1
Ebből látszik, hogy gyönyörűen felismerte (máramennyire gyönyörűnek lehet nevezni a nem teljes sebességet és az scsi emulációt). Kapott helyet a /dev/sdh alatt, és a gnome pedig mountolta is /media/disk-1 alá.
Üdv!
Burján Ferenc wrote:
Köszi a segítséget. Mielőtt belebonyolódnánk fontos, hogy úgy adom-e ki a tail-t, hogy bootoláskor bent volt az USB-ben, vagy nem?
Most itt van egy tail kimenet, de most éppen bent van az USB-ben és működik,mert bootolás után vagyok. Ha leválasztom, akkor megint nem lesz csak reboottal.
A kimenet:
tail -f /var/log/messages
Jun 15 20:25:13 linux-rlzp dhclient: DHCPACK from 192.168.1.1 Jun 15 20:25:13 linux-rlzp dhclient: bound to 192.168.1.100 -- renewal in 1785 seconds. Jun 15 20:54:58 linux-rlzp dhclient: DHCPREQUEST on eth1 to 192.168.1.1 port 67 Jun 15 20:54:58 linux-rlzp dhclient: DHCPACK from 192.168.1.1 Jun 15 20:54:58 linux-rlzp dhclient: bound to 192.168.1.100 -- renewal in 1656 seconds. Jun 15 20:55:28 linux-rlzp syslog-ng[2015]: Log statistics; dropped='pipe(/dev/xconsole)=0', dropped='pipe(/dev/tty10)=0', processed='center(queued)=354', processed='center(received)=307', processed='destination(newsnotice)=0', processed='destination(acpid)=2', processed='destination(firewall)=25', processed='destination(null)=4', processed='destination(mail)=2', processed='destination(mailinfo)=2', processed='destination(console)=13', processed='destination(newserr)=0', processed='destination(newscrit)=0', processed='destination(messages)=164', processed='destination(mailwarn)=0', processed='destination(localmessages)=0', processed='destination(netmgm)=110', processed='destination(mailerr)=0', processed='destination(xconsole)=13', processed='destination(warn)=19', processed='source(src)=307' Jun 15 21:22:34 linux-rlzp dhclient: DHCPREQUEST on eth1 to 192.168.1.1 port 67 Jun 15 21:22:34 linux-rlzp dhclient: DHCPACK from 192.168.1.1 Jun 15 21:22:34 linux-rlzp dhclient: bound to 192.168.1.100 -- renewal in 1788 seconds. Jun 15 21:44:42 linux-rlzp su: (to root) feri on /dev/pts/1
B. Feri
2009. 06. 15, hétfő keltezéssel 21.39-kor "Horváth Gergely J." ezt írta:
Szia!
Engem érdekelne, hogy a kernel barátkozik-e vele:
tail -f /var/log/messages
Ha megismerkednek egymással, akkor a kernel ad neki valami jó kis helyet /dev/sd# környékén, onnantól kezdve lehet mountolni. Gnome és KDE is elméletben automatikusan megteszi, ha mégsem, akkor mondjuk
mount -t vfat /dev/sde /mnt/usb
Remélem segít. Ha a kernel szintjén minden oké, és Gnome-on vagy, akkor utána nézek mi lehet a hiba. Ha KDE, akkor <txtch> ? :)
Burján Ferenc wrote:
A 11.0 verzió óta miért nem tudok pen drivét a rendszerre illeszteni csak bootoláskor?
B. Feri