Hello, I try to get a recent Tumbleweed running on Espressobin[1]. According to the wiki page [2] [3] the opensuse u-boot [4] should be chain loaded. To do that I installed the latest tumbleweed image [5] on a sd card and added the u-boot.bin to the boot partition. The espressbin starts the marvell u-boot (U-Boot 2017.03-armada-17.10.1-gaee49fc (Jan 29 2018 - 18:21:49 +0800)) out of the flash. With that I tried to chain load u-boot: Marvell>> mmc info; ext4load mmc 0:2 0x0 u-boot.bin; go 0x0 Device: sdhci@d0000 Manufacturer ID: 27 OEM: 5048 Name: SD8GB Tran Speed: 50000000 Rd Block Len: 512 SD version 3.0 High Capacity: Yes Capacity: 7.2 GiB Bus Width: 4-bit Erase Group Size: 512 Bytes 627823 bytes read in 33 ms (18.1 MiB/s) ## Starting application at 0x00000000 ... "Synchronous Abort" handler, esr 0x02000000 ELR: f8 LR: 3ff2c808 x0 : 0000000000000001 x1 : 000000003f7a1df8 x2 : 000000003f7a1df8 x3 : 0000000000000000 x4 : 0000000000000000 x5 : 0000000000000000 x6 : 0000000000000001 x7 : 0000000000000044 x8 : 000000003f715db0 x9 : 0000000000000008 x10: 000000003f715a3a x11: 0000000000000001 x12: 0000000000000008 x13: 00000000ffffffff x14: 000000003f71608c x15: 000000003f7161b8 x16: 000000003ff9afdc x17: 000000003ff97c4e x18: 000000003f718cf8 x19: 000000003f7a1df8 x20: 0000000000000002 x21: 0000000000000000 x22: 000000003f7a1df0 x23: 000000003ffb2da0 x24: 0000000000000002 x25: 0000000000000000 x26: 0000000000000000 x27: 0000000000000000 x28: 000000003f7a1e50 x29: 000000003f715ef0 Resetting CPU ... Unfortunately it crashes. Is this chain load procedure still valid? Is there something else missing? Br, Frank [1] http://wiki.espressobin.net/tiki-index.php?page=About+ESPRESSObin [2] https://en.opensuse.org/HCL:EspressoBin [3] https://en.opensuse.org/HCL:MacchiatoBin [4] https://download.opensuse.org/ports/aarch64/tumbleweed/repo/oss/aarch64/u-bo... [5] https://download.opensuse.org/ports/aarch64/tumbleweed/images/openSUSE-Tumbl... -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org