Mailinglist Archive: opensuse-factory (914 mails)

< Previous Next >
[opensuse-factory] Leap 42.3 Build 0294 released!

Please note that this mail was generated by a script.
The described changes are computed based on the x86_64 DVD.
The full online repo contains too many changes to be listed here.

Please check the known defects of this snapshot before upgrading:

When you reply to discuss some issues, make sure to change the subject.
Please use the test plan at
to record your testing efforts and use bugzilla to report bugs.

Packages changed:
audacity (2.1.2 -> 2.1.3)
cdrtools (3.01 -> 3.02~a07)
desktop-translations (20151007 -> 84.87.20170613.847c686)
flac (1.3.0 -> 1.3.2)
kernel-source (4.4.72 -> 4.4.73)
python-kiwi (9.3.3 -> 8.32.2)
python-pyasn1 (0.2.3 -> 0.1.9)
release-notes-openSUSE (42.3.20170508 -> 42.3.20170621)
schily-libs (3.01 -> 3.02~a07)
speex (1.2~rc2 -> 1.2)
terminus-bitmap-fonts (4.39 -> 4.46)

=== Details ===

==== audacity ====
Version update (2.1.2 -> 2.1.3)
Subpackages: audacity-lang

- Added requires for flac > 1.3.0.
- Update to release 2.1.3
- Recreated audacity-no_buildstamp.patch with 2.1.3 release date
and time.
- Added audacity-flacversion.patch to fix minimum version in m4
- Rebased audacity-fix-nonsense.patch
- Deleted audacity-ffmpeg.patch, audacity-flac_assert.h.patch and
- Upstream changes:
* Interface:
* Pinned option on waveform so waveform moves and
recording/playing head stays still.
* Timer Record options to save/export/exit after recording.
* Scrub Ruler and optional Scrub Toolbar.
* New shortcuts ALT+RIGHT and ALT+LEFT (move to labels without
* Effects:
* Effects no longer grayed out when paused.
* New Distortion effect (replaces Leveller).
* SBSMS (higher quality but slower) option on Change
Tempo/Change Pitch effects.
* New Rhythm Track generator (replaces Click Track).
* New Generator for Sample Data Import.
* Nyquist effects now significantly faster.
* Other Changes:
* Upgraded the PortAudio library to v19 rev r1966.
* Bug fixes:
* Over 60 bugs fixed, including five longstanding bugs.

==== cdrtools ====
Version update (3.01 -> 3.02~a07)
Subpackages: cdda2wav cdrecord mkisofs

- Fix build on older distros (e.g. SLE11) -- no caps support in RPM
- Remove build dependency on mmv (not present on SLE, and its usage
is easily replaced with a small shell script).
- Fix build on older distros (makedepend)
- Update to new upstream release 3.02~a07
* mkisofs: deduplication for files)
- Update to new upstream release 3.02~a06
* libscg: fixed a copy/paste problem in the Linux transport that
could cause libscg to assume a timeout when no timeout occurred.
* libscg: add a new generic option interface.
* libscg: New option "ignore-resid" to work around a Linux kernel
* mkisofs: better warning messages for rotten directories when in
multi-session mode.
- Update to new upstream release 3.02~a05
* mkisofs now tries to be more immune against rotten iso images
when in multi session mode.
* mkisofs no longer tries to access a string past the null byte
when dealing with Joliet.
* mkisofs fixed a bug related to sorting with multi extent files
(greater than 4 GB).
- Update to new upstream release 3.02~a04
* Support for DVD-Audio was added to mkisofs.
* Several bug fixes in mkisofs and mkisofs/diag/* programs to make
them more robust against rotten ISO images.
- Update to new upstream release 3.02~a03
* isoinfo no longer eats up all memory when an ISO image
with a directory loop is specified.
- Update to new upstream release 3.02~a02
* Many smaller "isoinfo" enhancements including support for
relocated directories.
- Update to new upstream release 3.02~a01
* libparanoia: work around a bug that resulted from uninitalized
statistics data for C2 checks.
* cdda2wav now supports sound output on Linux again.

==== desktop-translations ====
Version update (20151007 -> 84.87.20170613.847c686)

- Update to version 84.87.20170613.847c686:
* Translated using Weblate (Catalan)
* Translated using Weblate (Catalan)
* Translated using Weblate (French)
* Translated using Weblate (Catalan)
* Translated using Weblate (Italian)
* Translated using Weblate (Catalan)
* Translated using Weblate (French)
* Translated using Weblate (Lithuanian)
* Translated using Weblate (Ukrainian)
* Translated using Weblate (Russian)
* Translated using Weblate (Russian)
* Translated using Weblate (Ukrainian)
* Translated using Weblate (Ukrainian)
* Translated using Weblate (Ukrainian)
* Translated using Weblate (Ukrainian)
* Translated using Weblate (Ukrainian)
* Translated using Weblate (Ukrainian)
* Translated using Weblate (German)
* Translated using Weblate (German)
* Translated using Weblate (German)
* Translated using Weblate (German)
* Translated using Weblate (German)
* Translated using Weblate (German)
* Translated using Weblate (Lithuanian)
* Translated using Weblate (Lithuanian)
* Translated using Weblate (Lithuanian)
* Translated using Weblate (Spanish)
* Translated using Weblate (German)
* Translated using Weblate (German)
* Translated using Weblate (German)
* Translated using Weblate (Spanish)
* Translated using Weblate (Lithuanian)
* Translated using Weblate (German)
* Translated using Weblate (German)
* Translated using Weblate (Spanish)
* Translated using Weblate (Spanish)
* Translated using Weblate (Spanish)
* Translated using Weblate (German)
* Translated using Weblate (German)
* Translated using Weblate (Spanish)
* Translated using Weblate (Kabyle)
* Translated using Weblate (Kabyle)
* Translated using Weblate (Kabyle)
* Translated using Weblate (Portuguese (Brazil))
* Translated using Weblate (Chinese (China))
* Translated using Weblate (Spanish)
* Translated using Weblate (Spanish)
* Translated using Weblate (Danish)
* Translated using Weblate (Danish)
* Translated using Weblate (Lithuanian)
* Translated using Weblate (Lithuanian)
* Translated using Weblate (German)
* Translated using Weblate (German)
* Revert swedish translation to SVN state
* Regenerate translations from .desktop files
- Update to version 84.87.20170531.7e7f57d:
* Translated using Weblate (Arabic)
* Translated using Weblate (Arabic)
* Translated using Weblate (Catalan)
* Translated using Weblate (Catalan)
* Translated using Weblate (Catalan)
* Translated using Weblate (Catalan)
* Translated using Weblate (Catalan)
* Translated using Weblate (Catalan)
* Translated using Weblate (Catalan)
* Translated using Weblate (Catalan)
* Translated using Weblate (Slovak)
* Translated using Weblate (Slovak)
* Translated using Weblate (Slovak)
* Translated using Weblate (Slovak)
* Translated using Weblate (Slovak)
* Translated using Weblate (Slovak)
* Translated using Weblate (Slovak)
* Translated using Weblate (Slovak)
* Translated using Weblate (Slovak)
* Translated using Weblate (Japanese)
* Translated using Weblate (Japanese)
* Translated using Weblate (Japanese)
* Translated using Weblate (Catalan)
* Translated using Weblate (Arabic)
* Translated using Weblate (Catalan)
* Translated using Weblate (Italian)
* Translated using Weblate (Slovak)
* Translated using Weblate (Arabic)
* Translated using Weblate (Catalan)
* Translated using Weblate (Italian)
* Translated using Weblate (Slovak)
* Translated using Weblate (Italian)
* Translated using Weblate (Slovak)
* Translated using Weblate (Japanese)
* Translated using Weblate (Arabic)
* Translated using Weblate (Catalan)
* Translated using Weblate (Arabic)
* Translated using Weblate (Catalan)
* Translated using Weblate (Japanese)
* Translated using Weblate (Slovak)
* Translated using Weblate (Italian)
* Translated using Weblate (Japanese)
* Translated using Weblate (Catalan)
* Translated using Weblate (Italian)
* Translated using Weblate (Italian)
* Translated using Weblate (Catalan)
* Rename appstream.po to appstreamdata.po to avoid conflict
* Rename appstream -> appstreamdata in tar2po
* Translated using Weblate (Catalan)
* Translated using Weblate (Portuguese (Brazil))
* Translated using Weblate (Catalan)
* Translated using Weblate (Italian)
* Translated using Weblate (Spanish)
* Translated using Weblate (French)
* Translated using Weblate (Portuguese (Brazil))
* Translated using Weblate (Catalan)
* Translated using Weblate (Italian)
* Translated using Weblate (Portuguese (Brazil))
- Change License: to MIT
- Also generate other mo files
- Update to version 84.87.20170518.2205c8c:
* tar2po: Escape newline in gettext strings correctly
* Merge POT files into PO files to not lose translations
* Update translations with latest changes
- Add gettext-runtime and xz BuildRequires
- Update to version 84.87.20170517.b889563:
* Translated using Weblate (Japanese)
* Translated using Weblate (Japanese)
* Translated using Weblate (Arabic)
* Translated using Weblate (Arabic)
* Translated using Weblate (Arabic)
* Translated using Weblate (Catalan)
* Translated using Weblate (Japanese)
* Translated using Weblate (Arabic)
* Translated using Weblate (Italian)
* Translated using Weblate (Catalan)
- Update to version 84.87.20170202.0c8d823:
* Translated using Weblate (Slovak)
* Translated using Weblate (Slovak)
* Translated using Weblate (Slovak)
* Translated using Weblate (Slovak)
* Translated using Weblate (Slovak)
* Translated using Weblate (Italian)
* Translated using Weblate (Slovak)
* Translated using Weblate (Italian)
* Translated using Weblate (Italian)
* Translated using Weblate (Catalan)
- Update to version 84.87.20170109.20ca54c:
* new data from upstream
- Update package for new GIT repo.

==== flac ====
Version update (1.3.0 -> 1.3.2)
Subpackages: flac-devel libFLAC++6 libFLAC8 libFLAC8-32bit

- Update to version 1.3.2
* Fix undefined behaviour using GCC/Clang UBSAN (erikd).
* General hardening via fuzz testing with AFL (erikd and
* General code improvements (lvqcl, erikd and others).
* Add FLAC in MP4 specification docs (Ralph Giles).
* Fix some cppcheck warnings (erikd).
* Assume all currently used OSes support SSE2.
* Fix potential infinite loop on flac-to-flac conversion
* Add WAVEFORMATEXTENSIBLE to WAV (as needed) when
decoding (lvqcl).
* Only write vorbis-comments if they are non-empty.
* Error out if decoding RAW with bits != (8|16|24).
* Add --scan-replay-gain option.
* CPU detection cleanup and fixes (Julian Calaby, erikd
and lvqcl).
* Fix two stream decoder bugs (Max Kellermann).
* Fix a NULL dereference bug (on a malformed file).
* Changed the LPC order guess for a slight compression
improvement, particularly for classical music
(Martijn van Beurden).
* Improved encoding speed on older Intel CPUs.
* Fixed a seeking bug when decoding certain files
(Miroslav Lichvar).
* Put an upper bound (32768) on the number of seek
* Fix potential memory leaks.
* Support 64bit brword/bwword allowing
FLAC__BYTES_PER_WORD to be set to 8 (disabled by
* Fix an out-of-bounds heap read.
- Refreshed flac-cflags.patch
- Drop patch that should be upstreamed first, otherwise we will
have to keep it ofrever:
* flac-ocloexec.patch
- Drop wrong patch:
* flac-fix-pkgconfig.patch
+ If using this change you get assert.h include overriden in your
project by the one from FLAC/ which is not what upstream desired
If packages fail to build they should fix their include
- Build documentation as noarch
- Cleanup spec file with spec-cleaner
- Update url
- Remove no longer needed patches
* flac-fix-CVE-2014-8962.patch
* flac-fix-CVE-2014-9028.patch
* 0001-getopt_long-not-broken-here.patch
- Remove following as benefit of using openssl is small
* 0001-Allow-use-of-openSSL.patch
- Add flac-cflags.patch
- Use doxygen to build documentation
- Split documentation to separate package
- Update to 1.3.1
* Improved decoding efficiency of all bit depths but especially
so for 24 bits for IA32 architecture (lvqcl and Miroslav Lichvar).
* Faster encoding using SSE and AVX (lvqcl).
* Fixed bartlett, bartlett_hann and triangle functions.
* New apodization functions partial_tukey and punchout_tukey for
improved compression (Martijn van Beurden).
* Retuned compression presets to incorporate new apodization
functions (Martijn van Beurden).
* Fix -Wcast-align warnings on armhf architecture (Erik de
Castro Lopo).
* Help output documentation improvements.
* I/O buffering improvements on Windows to reduce disk
fragmentation when writing files.
* Only write vorbis-comments if they are non-empty.
* Fix symbol visibility in XMMS plugin.
* Many fixes and improvements across all the build systems.
* Fix CVE-2014-9028 (heap write overflow) and CVE-2014-8962
(heap read overflow)
- A couple of security fixes:
* flac-fix-CVE-2014-8962.patch:
arbitrary code execution by a stack overflow (CVE-2014-8962,
* flac-fix-CVE-2014-9028.patch:
Heap overflow via specially crafted .flac files (CVE-2014-9028,
- Update to final upstream release 1.3.0
* No user-visible changes
- More robust make install call
- Update to flac 1.3.0pre4 (packaged as 1.2.99_git* to avoid
messing with RPM versioning)
* Mostly non-linux related bugfixes plus autotools fixes
- flac-openssl.patch --> 0001-Allow-use-of-openSSL.patch
- remove flac-1.2.1-automake1_13.patch, fixed in upstream.
- add 0001-getopt_long-not-broken-here.patch, FLAC bundles
GNU-compatible getopt_long for broken OS, but we do have
a functional version in libc already.
- license update: BSD-3-Clause and GPL-2.0+ and GFDL-1.2
Numerous GPL-2.0+ licensed files;documtation is GFDL-1.2
- add flac-1.2.1-automake1_13.patch, fix build with automake-1.13.1
- Add flac-fix-pkgconfig.patch to fix includedir in the pkgconfig
- add xz buildrequires for old distros.
- Update to current git
* patches deleted:
- flac-1.2.1-asm.patch
- flac-1.2.1-bitreader.patch
- flac-gcc43-fixes.diff
- flac-gcc47.patch
- flac-leaks.patch
- flac-no-xmms.diff
- flac-visibility.patch
- flac-printf-format-fix.diff
All Upstreamed either by us or other distros.
- Add flac-openssl.patch, do crypto with openssl (not wanted upstream)
- Restore make check
- Don't ignore $(AM_CFLAGS).
- Remove ppc patch.
- Add flac-gcc47.patch: Replacing strcpy without 'lenght
limitation' with strncpy, limited to 4 chars. This is safe, as we
check the length already to be sure it is 4 chars, yet do not
suffer from the problem that strcpy wants to add a '\0' char in
plus to the target string.
- don't use fvisibility=hidden on ppc. As it can't find symbols
- Fix some memory and resources leak.
- Link shared libraries with -Bsymbolic-functions
- annotate relevant functions with proper attributes to
allow the compiler generate better code (attribute hot. alloc_size)
- Support symbol visibility features
- Disable test suite, nothing wrong with it, it just
takes too long to run and uses private/hidden symbols to
test flac's internals.
- Use O_CLOEXEC in all library code.
- add libtool as buildrequire to make the spec file more reliable
- Build with --enable-sse, this only disables runtime
checking if the *OS* supports SSE, which registers a
SIGILL signal handler then tries to execute SSE code...
it still tests the running *CPU* though.
- Apply packaging guidelines (remove redundant/obsolete
tags/sections from specfile, etc.)
- Add flac-devel to baselibs
- Do not build with -fno-strict-aliasing since is no longer
- Impoer two patches from redhat, one speeds up decoding and
the other enables the working ASM optimizations.
- run make check, but only the basic test suite, complete
one takes hours.
- add baselibs.conf as a source
- updated patches to apply with fuzz=0

==== kernel-source ====
Version update (4.4.72 -> 4.4.73)
Subpackages: kernel-default kernel-default-devel kernel-devel kernel-docs
kernel-macros kernel-syms

- Delete
Not needed yet for Leap kernel.
- commit 4e6675a
- md: fix a null dereference (bsc#1040351).
- commit dd58f71
- Update kabi files: import for other architectures, too
- commit 2f1cc13
- net: phy: realtek: fix enabling of the TX-delay for RTL8211F
- commit d7da697
- Refresh btrfs backref rbtree patchset to match upstream submission.
- commit fa2f027
- RDMA/bnxt_re: Allow posting when QPs are in error (bsc#1044448).
- commit ff678ff
- net/mlx5e: Avoid doing a cleanup call if the profile doesn't
have it (bsc#1015342).
- net/mlx5e: Fix min inline value for VF rep SQs (bsc#1015342).
- commit 43da9af
- RDMA/qib,hfi1: Fix MR reference count leak on write with
immediate (bsc#1045640).
- commit 1f6ac4c
- net/mlx5e: Fix timestamping capabilities reporting (bsc#966170
- commit ec1bb20
- fm10k: correctly check if interface is removed (bsc#1024375
- sfc: limit the number of receive queues (bsc#1017967
- sfc: do not device_attach if a reset is pending (bsc#1017967
- sfc: stop setting dev_port (bsc#1017967 FATE#321663).
- commit d95e0b3
- rbd: fix and simplify rbd_osd_req_format_rw() (bsc#1045213).
- rbd: copy compare-and-write osd requests before resubmission
- rbd: helper to copy compare-and-write osd requests
- rbd: ensure r_request is allocated for creatrunc (bsc#1042210).
- commit dd3764b
- Update patches.fixes/nfs-svc-rdma.fix (bsc#1044854).
Fix bsc reference
- commit d0282b0
- reiserfs: don't preallocate blocks for extended attributes
- commit 1d1075d
- printk/console: Correctly mark console that is used when
opening /dev/console (bsc#1040020).
- commit 2d358a5
- ahci: thunderx2: stop engine fix update (bsc#1045590).
- commit 0f92e07
- KVM: arm/arm64: Handle hva aging while destroying the vm
- commit 123e077
- fixup! nvme_fc: fix error recovery on link down (bsc#1044763).
- commit 3b737e9
- lpfc: fix refcount error on node list (bsc#1045404).
- lpfc: Fix nvme io stoppage after link bounce (bsc#1045404).
- nvme_fc: fix error recovery on link down (bsc#1044763).
- nvme_fc: fix double calls to nvme_cleanup_cmd() (bsc#1044763).
- commit 28fb785
- ibmvnic: Fix error handling when registering long-term-mapped
buffers (bsc#1045568).
- commit 27cd512
- ibmvnic: Fix incorrectly defined ibmvnic_request_map_rsp
structure (bsc#1045568).
- commit ae86c21
- IB/ipoib: Fix memory leak in create child syscall (bsc#1022595
- commit 8109fd6
- xgene: Check all RGMII phy mode variants (bsc#1033621).
- drivers: net: xgene: Fix redundant prefetch buffer cleanup
- drivers: net: xgene: Workaround for HW errata 10GE_10/ENET_15
- drivers: net: xgene: Add frame recovered statistics counter
for errata 10GE_8/ENET_11 (bsc#1033621).
- drivers: net: xgene: Workaround for HW errata 10GE_4
- drivers: net: xgene: Add rx_overrun/tx_underrun statistics
- drivers: net: xgene: Extend ethtool statistics (bsc#1033621).
- drivers: net: xgene: Remove unused macros (bsc#1033621).
- drivers: net: xgene: Refactor statistics error parsing code
- drivers: net: xgene: Remove redundant local stats (bsc#1033621).
- drivers: net: xgene: Use rgmii mdio mac access (bsc#1033621).
- drivers: net: phy: xgene: Add lock to protect mac access
- drivers: net: xgene: Protect indirect MAC access (bsc#1033621).
- drivers: net: xgene: Add workaround for errata 10GE_8/ENET_11
- drivers: net: xgene: Add workaround for errata 10GE_1
- drivers: net: xgene: Fix Rx checksum validation logic
- drivers: net: xgene: Fix wrong logical operation (bsc#1033621).
- drivers: net: xgene: Fix hardware checksum setting
- drivers: net: xgene: Fix crash on DT systems (bsc#1033621).
- drivers: net: xgene: Simplify xgene_enet_setup_mss() to kill
warning (bsc#1033621).
- drivers: net: xgene: ethtool: Add get/set_pauseparam
- drivers: net: xgene: constify xgene_cle_ops structure
- phy: Add helper function to check phy interface mode
- commit 1c9e178
- btrfs: account for pinned bytes in should_alloc_chunk (bsc#1040182).
This version drops accounting for bytes_may_use.
- commit 0a418fd
- Remove obsolete patches for fate#321840
- commit 6fe97c3
- mm: fix new crash in unmapped_area_topdown() (bnc#1039348).
- mm: larger stack guard gap, between vmas (bnc#1039348,
CVE-2017-1000364, bnc#1045340).
- Delete patches.fixes/0001-mm-enlarge-stack-guard-gap.patch:
replace it with the upstream solution
- Delete
- commit f276e25
- Update kabi files: sync with the latest qed updates
- commit 89c0731
- ibmvnic: Remove module author mailing address (bsc#1045467).
- commit 337e37f
- qedi: Add support for offload iSCSI Boot (bsc#1043083).
- qed: Add support for changing iSCSI mac (bsc#1043083).
- qed: Support NVM-image reading API (bsc#1043083).
- qed: Share additional information with qedf (bsc#1043083).
- qed: Correct order of wwnn and wwpn (bsc#1043083).
- commit 4843a8f
- Fix loop device flush before configure v3 (bnc#1039699).
- commit 21b86f9
- blacklist.conf: blacklist c34a69059d78 (bnc#1044880)
- commit 0b2e1df
- dm: remove dummy dm_table definition (bsc#1045307)
- commit 1710664
- ibmvnic: Correct return code checking for ibmvnic_init during
probe (bsc#1045286).
- commit 5553444
- ibmvnic: Return from ibmvnic_resume if not in VNIC_OPEN state
- commit 883f476
- powercap/intel_rapl: fix and tidy up error handling
- powercap / RAPL: handle missing MSRs (bsc#1045284).
- commit 6031b95
- KVM: x86: Expose more Intel AVX512 feature to guest
- commit 92203bc
- Update

Fix the wrong bsc number.
- commit 00acc35
- lan78xx: use skb_cow_head() to deal with cloned skbs
- commit 217ec53
- mm: fix cache mode of dax pmd mappings (bsc#1044979).
- commit 729ba44
- loop: Add PF_LESS_THROTTLE to block/loop device thread
- commit 261bfb2
- Fix kabi after adding new field to struct mddev (bsc#1040351).
- md: use a separate bio_set for synchronous IO (bsc#1040351).
- commit 88cd9a5
- Update
- Update
- Update
- Update
- Update
- Update
- Update
- Update
- Update patches.fixes/net-vrf-Fix-dst-reference-counting.patch
- Update
- Update
- Update
- Update
Fix incorrect reference.
- commit 0c874ba
- Refresh network patches sorted section
- commit bb9d92b
- net/mlx5: Release FTE lock in error flow (bsc#966170 bsc#966172
- commit 39c1bc0
- IB/mlx5: Enlarge autogroup flow table (bsc#966170 bsc#966172
- blacklist.conf: not applicable mlx4/mlx5 fixes
- net/mlx5: Don't unlock fte while still using it (bsc#966170
bsc#966172 bsc#966191).
- net/mlx5e: Modify TIRs hash only when it's needed (bsc#966170
bsc#966172 bsc#966191).
- net/mlx5: Fix create autogroup prev initializer (bsc#966170
bsc#966172 bsc#966191).
- net/mlx5: Prevent setting multicast macs for VFs (bsc#966170
bsc#966172 bsc#966191).
- IB/mlx5: Check supported flow table size (bsc#966170 bsc#966172
- IB/mlx5: Fix kernel to user leak prevention logic (bsc#966170
bsc#966172 bsc#966191).
- IB/mlx5: Assign DSCP for R-RoCE QPs Address Path (bsc#966170
bsc#966172 bsc#966191).
- mlx4: Fix memory leak after mlx4_en_update_priv() (bsc#966170
bsc#966172 bsc#966191).
- commit ece7432
- xen-blkback: don't leak stack data via response ring
(bsc#1042863 XSA-216).
- commit d2636ad
- qed: Enable RoCE parser searching on fp init (bsc#1019695).
- commit 9b26fc3
- cxgb4: notify uP to route ctrlq compl to rdma rspq
- commit e800b91
- Fix soft lockup in svc_rdma_send (bsc#729329).
- commit 474ee52
- Update kabi files: import kABI files for x86-64
- commit 221f271
- net/mlx5e: Fix wrong indications in DIM due to counter
wraparound (bsc#1015342).
- net/mlx5e: Added BW check for DIM decision mechanism
- net/mlx5: Enable 4K UAR only when page size is bigger than 4K
- net/mlx5: Remove several module events out of ethtool stats
- commit 0365ead
- nvme-rdma: fast fail incoming requests while we reconnect
- commit acbc651
- Refresh patches.fixes/xfs-fix-buffer-I_O-accounting-race.patch.
- commit 4a0d453
- Refresh patches.fixes/xfs-fix-buffer-I_O-accounting-race.patch.
- commit 0c01ef6
- qed: fix dump of context data (bsc#1019695).
- commit 3b942a4
- Linux 4.4.73 (bnc#1012382 bsc#1028017).
- jump label: fix passing kbuild_cflags when checking for asm
goto support (git-fixes).
- sctp: check af before verify address in sctp_addr_id2transport
- ipv6: release dst on error in ip6_dst_lookup_tail (git-fixes).
- ravb: Fix use-after-free on `ifconfig eth0 down` (git-fixes).
- blacklist.conf: add more
- Refresh
- Delete
- Delete
- commit 375e337
- blacklist.conf: move commits not blacklisted in SP2 to SP3 section
- commit 54493cc
- Blacklist powerpc/mm/4k: Limit 4k page size config to 64TB virtual
address space
- commit db2f140
- IB/addr: Fix setting source address in addr6_resolve()
- commit 947a8b9
- ibmvnic: driver initialization for kdump/kexec (bsc#1044772).
- ibmvnic: Exit polling routine correctly during adapter reset
- commit 240d50f
- ibmvnic: Remove VNIC_CLOSING check from pending_scrq
- ibmvnic: Sanitize entire SCRQ buffer on reset (bsc#1044767).
- commit 6b1a8c3
- ibmvnic: Ensure that TX queues are disabled in __ibmvnic_close
- commit d40c4fd
- ibmvnic: Activate disabled RX buffer pools on reset
- commit c06570c
- blacklist.conf: black list few uninteresting follow up fixes
- commit 1326f25
- blacklist.conf: Fix has complex pre-requisites that are borderline in terms
of benefit
- commit 138dd1e
- powerpc/perf: Fix Power9 test_adder fields (fate#321438,
2017-06-19] Pending SUSE Kernel Fixes).
- commit 18f4ef7

==== krita ====
Subpackages: krita-lang

- Remove filler wording from description.

==== polkit-default-privs ====

- relaxing action "org.opensuse.cupspkhelper.mechanism.job-edit" (bsc#827331)

==== python-enum34 ====

- provide python2-enum34 to support singlespec transparently
- Update to version 1.1.3
- update to version 1.0.4:
* no upstream changelog
- Do not use depreciated %py_requires
- Some fixes
- Fixed wrong license
- Run fdupes at build time
- Initial package

==== python-kiwi ====
Version update (9.3.3 -> 8.32.2)
Subpackages: kiwi-pxeboot kiwi-tools

- Bump version: 8.32.1 ? 8.32.2
- Fixed setup_plymouth_splash
The schema generated get_bootsplash_theme() method returns a list
because it's section content. The return value of the method was
used as a string which caused a runtime error
- Bump version: 8.32.0 ? 8.32.1
- Added Leap42.3 boot descriptions
- Bump version: 8.31.0 ? 8.32.0
- Incorporate important Fixes
+ Add support for runtime configuration file
+ Add support for custom xz tool options
+ Add support for excluding packages when using DNF
+ Add support for excluding packages when using Yum
+ Fixed GPL license text to match headers and spec
+ Refactor documentation layout and structure
+ Added dracut output file format detection
+ Handle rpm-check-signatures flag for each package manager
+ Fixes OEM deployments on a free partition, bnc#1039469
+ Improve rpm-check-signatures support
+ Added --clear-cache option
+ Add --signing-key option
+ Fixup working dir for editboot scripts
+ Fixup kernel name lookup
+ Added fallback setup for grub secure boot
+ Allow vendor specific grub config file location
+ Fixup EFI setup for iso images
+ Refactor detection code for grub directory name
+ Include imageonly attribute for repositories
+ Fixed gce disk format
- Bump version: 8.30.1 ? 8.31.0
- Incorporate important Fixes
+ Add support for derived container builds in OBS
+ Support for weak and strong dependencies in dnf, yum
+ Add support for OCI images
+ Add require/recommend installation support for yum
+ Include 'plusRecommended' management for dnf
+ Update development and contribution chapter
+ Fixup grub2 template parameters
+ Fixup grub2 bios module setup
+ Avoid GRUB_DISTRIBUTOR setup in etc/default/grub
+ Added <oem-nic-filter> element
- Bump version: 8.30.0 ? 8.30.1
- Incorporate important Fixes
+ Fixup pxe builder. Filesystem image rootfs was not in toplevel
+ Refactor ip link detection. There is no reliable way to check
if a link is unplugged, thus the system has to be changed
+ Ensure grub.cfg exists in EFI path for iso images
+ Delete no longer needed btrfs bootpath setup (bsc#1030038)
+ Fixup bootloader menu title setup (bsc#1032118)
+ Avoid GRUB_DISTRIBUTOR setup in etc/default/grub (bsc#1032119)
+ Added <oem-nic-filter> element
+ Fixup grub2 setup and tool calls
- Bump version: 8.29.8 ? 8.30.0
- Incorporate important Fixes and Features
+ Added support for layered docker images
+ Added support for base docker images created via umoci/skopeo
+ Added support for multipython build
+ Added image info command
+ Fixed kiwi API, make sure modules are found when used in
other python programs
+ Fixed use of legacy services
+ Support repositories with credentials
+ Support DNF package manager
+ Fixed network link detection
Related to (bsc#1011342) and (fate#319678)
- Disable automatic documentation deployment
The documentation should be in line with the master branch
not with the version maintained for SLES. The documentation
for SUSE enterprise products is handled by the SUSE doc
- Bump version: 8.29.7 ? 8.29.8
- Include in SLE 12 (fate#322094, bsc#1011342)
- Bump version: 8.29.6 ? 8.29.7
- Update documentation
Add information about new hook: handleMachineID
- Bump version: 8.29.5 ? 8.29.6
- Fixup isolinux timeout configuration
isolinux counts the timeout in units of 1/10 seconds.
Thus the value provided in the image description needs
to be adapted correctly. This Fixes #228
- Bump version: 8.29.4 ? 8.29.5
- Fixup setupMachineID
Cleaning up existing machine id files by deleting them
causes an interactive session to be started by systemd
This is something we don't want. As the consequences
of touching the machine id files seems to be too critical
the method has been turned into a hook caller. This
allows the user to make use of it on their own purpose
and by default doesn't mess with the machine id files
- Bump version: 8.29.3 ? 8.29.4
- Change processing of setupMachineID
Instead of creating new machine ids for systemd and dbus
the method now cleans up all existing machine ids and
leave it up to systemd to initialize and create new ids.
This allows to make use of the native way how systemd
retrieves and handles machine ids
- Fixup typo in ReST style
- Bump version: 8.29.2 ? 8.29.3
- Add utils.sysconfig to api documentation
- Completion for grub bootloader configuration
The configuration files /etc/sysconfig/bootloader and
/etc/default/grub needs to be created/updated with the
relevant values regarding the bootloader setup done by
kiwi. This Fixes #226
- Apply volume attributes for btrfs and lvm
The chattr utility is used to apply file attributes
So far only the no-copy-on-write attribute can be
specified in a volume setup. If further attributes
are needed they will be added on demand
- Added attributes element in volume type
- Added volume attribute copy_on_write
The copy_on_write attribute allows to activate or deactivate
the copy on write functionality for the desired volume.
This Fixes #218
- Make sure there is a storage default setup on s390
Storage disks on s390 requires an information about the
type and the blocksize. In case these information is not
provided in the kiwi XML configuration, None was set as
value in the zipl configuration which lead to an error.
This commit provides default values for those parameters
- Bump version: 8.29.1 ? 8.29.2
- Allow unix device names in oem-unattended-id setup
In order to allow a raw device name in oem-unattended-id
the /dev tree has been added to search list. This is useful
if e.g a ramdisk device which is not part of any /dev/disk/...
or /dev/mapper device map should be used as target disk for
the deployment. Thus a setup to stick the deployment to
e.g /dev/ram1 would look like this
This Fixes #221
- Don't delete ip tools from oemboot
network tools are needed for oem disk deployment via pxe
- Added .coveragerc
Clearly indicate which source files are excluded from the
coverage report
- Make sure setupMachineID also cares for dbus
Systemd and dbus should use the same machine-id. Therefore
a symlink /var/lib/dbus/machine-id pointing to /etc/machine-id
is created right after systemd-machine-id-setup. Fixes #219
- Fixup duplication of btrfs toplevel volume
If using root btrfs snapshot, the default toplevel subvolume is set to
/@/.snapshots/1/snapshot, thus all defined subvolumes are mounted
under that cusomized default subvolume. For the first time
subvolumes are mounted it is fine to include /@/.snapshots/1/snapshot
prefix as root is not yet set to that specific path, however in any
future mount this path prefix is not needed any more, as the root
get mounted in /@/.snapshots/1/snapshot by default. Fixes (bsc#1015549)
- Bump version: 8.29.0 ? 8.29.1
- Rebuild schema documentation
- Bump version: 8.28.3 ? 8.29.0
- Running after including the image repositories
This commit rearranges some code lines in order to run the
script after the repositories of the image have been included, this
way repositories can be trusted and refreshed in script.
- Update container builder code to new schema layout
- Auto update image descriptions to schema v6.5
- Update schema for container setup
In preparation to support creation of native docker containers the
way docker likes it, the kiwi schema has to be adapted. So far there
was no way to specify additional metadata information for containers.
With this commit a new section called <containerconfig> is provided.
containerconfig is a subsection of the type and only allowed for
the docker image type. This constraint is checked via a schematron
rule. In addition an xslt stylesheet moves the currently existing
container attribute, which was used to set a name for the container,
into the new containerconfig section as name attribute
- Bump version: 8.28.2 ? 8.28.3
- Fixed quadruple_token tokenizer
Information not provided should end up as a None type in the
list in any case. If an empty string was provided via e.g
--add-repo source,type,, the tokenizer puts in an empty string.
If the information was provided as --add-repo source,type a
None type was used. The code handling the information expected
a None type for not provided information, with an empty string
we end up in validation code which e,g complains that an empty
string can't be converted into an integer base repo priority
- Bump version: 8.28.1 ? 8.28.2
- Update documentation
Default provider must be set in the caller environment if
different from the default docker provider
- Bump version: 8.28.0 ? 8.28.1
- Update container builder documentation
Add information about the now available kiwi build box
and the use of it as part of libvirt provider setup for
- Bump version: 8.27.5 ? 8.28.0
- Bump version: 8.27.4 ? 8.27.5
- Fixup spec file build requires
shadow tools are needed for %pre tasks using
groupadd/useradd tools
- Bump version: 8.27.3 ? 8.27.4
- Fixup spec file tftp group/user setup
Let %pre fail if groupadd/useradd failed and show the error
to the user
- Added DiskFormatVagrantLibVirt class
Allow to build vagrant boxes for the libvirt provider
This Fixes #15
- Update vagrantconfig schema setup
Delete the virtualbox provider, As long as there is no
opensource variant for the ovf creation available we won't
support that provider
- Bump version: 8.27.2 ? 8.27.3
- Adapt documentation to rtd schema
replace topic node used for abstract by a hint. This results
in a color box for the abstract which looks better than what
rtd does with simple topics
- Adapt schema generator to rtd doc schema
- Move to rtd sphinx schema
The read-the-docs schema fits better into the mainstream
of online documentation
- Bump version: 8.27.1 ? 8.27.2
- Added check_volume_setup_has_no_root_definition
The root volume in a systemdisk setup is handled in a special
way. It is not allowed to setup a custom name or mountpoint for
the root volume. Therefore the size of the root volume can be
setup via the @root volume name. This check looks up the volume
setup and searches if there is a configuration for the '/'
mountpoint which would cause the image build to fail
- Prevent warning about unknown opt in workflow doc
- Bump version: 8.27.0 ? 8.27.1
- Rebuild schema documentation
- Add a docstring for the extension section
Short description what the extension section is good for
- Prevent any type from attribute recursion
The schema parser to create the documentation run into
an endless recursion for the new k.any type. As any could
be anything there is not much do document for this type.
Thus it is now skipped from the traversal
- Bump version: 8.26.1 ? 8.27.0
- Update documentation per review
- Including minimum volume size offset in disk size calculation
This commit adds Defaults:get_min_volume_mbytes() to the disk size
calculation algorithm. This should be sufficient to hold fdisk
default offset when creating the first partition and also to hold
the LVM metadata.
- Added extension documentation
- Make sure to catch exceptions from xsltproc
- Add extension validation and data access
If an extension section exists the xml data in this section
is validated against the RelaxNG schema which must be part
of the xmlcatalog for the used extension namespace. If the
data validates the method get_extension_xml_data can be used
to access the etree parse result for each of the extension
- LVM volumes management during grub2 install
During the grub2 install process volumes were not mounted properly,
a proper mount order was not taken into consideration and LV device
information was not given by the method get_volumes in VolumeManger.
This commit forces the mount (and umount) operations to be done in
coherent order and also modifies the get_volumes method in order
to return the device associated to each volume.
- Allow <extension> section for custom plugins
For the use case to add additional image description information
an extension section exists which allows to add custom section
and attributes. Custom XML information must be connected to a
namespace in order to avoid conflicts with the existing
structure. The following example shows how to place additional
XML information:
<extension xmlns:my_plugin="";>
<my_plugin:title name="cool stuff"/>
- Fixed expansion of msdos disks
If the target disk size is beyond 2TB it can't be expanded to
the full size if the msdos partition table layout is in use.
Because of this the disk expansion will be limited to the
allowed maximum for the msdos partition table type which is
at 2TB. This fixes bnc#1010966
- Bump version: 8.26.0 ? 8.26.1
- Fixup of string + operator vs. join use
- Fixed setup_disk_image_config in bootloader setup
The parameter for the uuid is not enough to handle all
supported disk geometries. If the disk has an extra boot
partition the bootloader setup must read the boot data
from the boot partition but must set the root for the
kernel cmdline to the root partition. Therefore the
interface needs to change and must provide both the
boot_uuid and the root_uuid in oder to allow the method
to setup the correct values
- Parse arch attribute as a comma separated list
This commit ensure that the arch attribute of each package section
is parsed as a comma separated list. This way, as in previous kiwi
versions, each package might be suitable for one or more specified
- Fixup kernel name setup in disk builder
The Kernel instance is the only correct place to ask
for the kernel name. This class has the responsibility
to know information about the selected kernel. The
additional arch based assumption on the kernel name
in the disk builder were wrong. This fixes bnc#1011936
- Fixed typo in solver api documentation
- Bump version: 8.25.5 ? 8.26.0
- No more hard links in result bundle
This commit changes the copy command of the result bundle task. Now
instead of creating hardlinks a relugar copy is performed. This way
we ensure that the bundled files will not be modified by
overwritting a linked file.
- Documentation workflow review
- The Sat solver class - an example
The Sat solver class can be used to run a solver operation
over a list of packages and/or patterns in order to receive
a dependency solved list of all required packages according
to the request. In order to do that a set of repositories
is required which provides the package metadata and their
requirements. The following is an example how to use the
Sat class in your application:
from kiwi.solver.sat import Sat
from kiwi.system.uri import Uri
from kiwi.solver.repository import SolverRepository
solver = Sat()
SolverRepository(Uri('obs://leap/42.2/repo/oss', 'yast2'))
- Fixup code smell for kernel name list
Iterating over only one list item doesn't need a loop
- Fixup style to be more pythonic
- Fixed release network using ip tool
Apply the cidr fix from setupNic and introduce a new method
called deleteNic which replaces the wrong ip call from the
releaseNetwork method. Fixes bnc#1003091
- KIWI workflow documentation
This commit ports the workflow documentation from previous KIWI
version and also adds a sections for listing the boot parameters
configurable in the Kernel command line.
- Fixed kernel name lookup
Complete the list of kernel names for the lookup. Normally
the kernel package provides a symlink to the actual kernel
image file. However if the link does not exist we extend the
search to a collection of names for possible kernel images.
The new list now also covers kernel names as used for arm
Along with the change this patch also provides an option to
raise an exception if the kernel lookup did not find any
kernel, which is used for the get_kernel() request in the
dracut initrd system setup where it is mandatory to find
a kernel image.
This fixes bnc#1010874
- Added Sat solver class
Added implementation for Solver class based on the SUSE
libsolv C library and the solv python binding
- Bump version: 8.25.4 ? 8.25.5
- Fixup lease time in setupNetworkWicked
The default lease time with 300s used by wicked is relatively
short and different from the default lease time of the former
dhcpcd. This change causes wicked to use a lease time of 3600s
This is related to bnc#1003091
- Fixup default behavior of releaseNetwork
If no tool was found to communicate with the dhcp server
in order to free the lease the method did nothing. However
it should at least bring down the network. This is
related to bnc#1003091
- Bump version: 8.25.3 ? 8.25.4
- Fixup get_volumes for lvm manager
The method also returned the root volume in the list of
volumes but it should only return a list of volumes
excluding root volume
- Fixup setupNic for address information in cidr
Ignore netmask if address is already in cidr format
- Bump version: 8.25.2 ? 8.25.3
- Fixup btrfs property setup
The readonly property is set on the filesystem toplevel.
kiwi has set the toplevel before any property is set.
- vhdfixed images result compression
This commit adds compression to the Result instance of the vhdfixed
disk. This concrete format is not compressed or dynamic, so that,
it makes sense compress them. Also this was the behavior in previous
kiwi versions.
- Replace tabs with spaces
- Fixup handling for root_is_readonly_snapshot
The information was not passed to the VolumeManager instance
- Fixup mount_volumes in VolumeManagerBtrfs
It is required to mount the toplevel btrfs filesystem if
not already mounted, prior to mounting the subvolumes
- Fixed busy mount state
Make sure subvolumes are umounted first. This prevents a
busy state in a partition setup with an extra boot
- Bump version: 8.25.1 ? 8.25.2
- Fixup creation of etc/default/grub config file
Only create the file if the base directory structure
in etc/default exists.
- Remove empty line too much
- Implement loading of snapshots and fix snapshot menu layout.
If you want to boot an old snapshot, but not to do a rollback,
we need to tell the kernel which snapshot to use. This patch
also fixes the broken layout of the grub snapshot menu.
- Move source of grub-snapshot.cfg to the right position
grub-snapshot.cfg should not be sourced at the begining, but
at the end of grub.cfg. Else with creating the first snapshot
this entry is getting the default boot target and the system
does not boot automatically anymore.
- Fixup netboot code for multipath boot device
If the root disk in a netboot deployment is a multipath device
we have to make sure the multipathd is started and the boot
device is mapped to the wwn
- Bump version: 8.25.0 ? 8.25.1
- Update doc string for download_from_repository
The doc string for this method contained a mime string
which is spuriously validated by the sphinx url checker.
This commit rewords the text in a way that the checker
is happy again
- Bump version: 8.24.10 ? 8.25.0
- Do not delete all repositories if there aren't repositories to import (#191)
This commit adds a tester method to check if there is any
repository marked as imageinclude. The method is used to
execute import_repositories_marked_as_imageinclude
method only when it is actually needed.
- grub.cfg: Fixes for btrfs as rootfs
This addresses the following issues
* An image based on btrfs using the entire boot as a subvolume
causes grub to be unable to find its config file. Thus kiwi
now raises an exception in this situation
* Don't prefix the bootpath with the snapshot path if the
btrfs root is placed in a snapshot. Instead the file
etc/default/grub must be written/updated with the
SUSE_BTRFS_SNAPSHOT_BOOTING variable set to true. Once
this is done the bootpath is consistently set to /boot
no matter which snapshot is active
- grub.cfg: Source grub-snapshot.cfg if present
Add a lookup for /.snapshots/grub-snapshot.cfg to the generated
grub.cfg. The file is shell sourced if it exists
- No need to mock Path.which
There is no need to mock Path.which as isoinfo binary from the
platform is needed to run the test, so better let the system look
for it, note that the binray can be located in the alternate
location (/usr/lib/genisoimage/) which is not part of the PATH.
In that particular case the iso_test would fail if we mock
- Updated system size calculations test
- Updated test for vhd-fixed subformat type
- Increase the default image size for XFS filesystems
When no size is specified in type section the resulting image size
is calculated using the size of the whole build-root increased by
an empiric factor. Some tests revealed that this factor was not
enough for XFS filesystems. The empiric factor has been increased.
This commit fixes #186
- vhd-fixed name corrected in subformat init class
This commit reverts the previous one and it applies the name change
to the subformat class initializer. This way the schema is not
altered and we keep compatibility with previous description files.
- vhdfixed format naming inconsistency
vhdfixed storage format name was not updated according its real
name in the kiwi schema, making it impossible to build any vhdfixed
image. The schema used to expect 'vhd-fixed', however, internally,
the code was expecting 'vhdfixed'. The schema has been updated.
This commit fixes #184
- Implemented SolverRepositoryRpmDir
Add support for local rpm-dir repositories
- ActivateImage links correction
Loading the iso image into a read-only ramdisk caused some issues
due to the activatImage method cp commands. With this commit the
symlinks are consistent during the preinit phase and also before
running the cp command it is tested we are not in a read-only
This commit is a port form openSUSE/kiwi#613 PR
- Implemented SolverRepositoryRpmMd
Add support for rpm-md repository types
- Fixup ip setup in setupNic
The invocation of ip in setupNic was invalid. The way this
was done causes the netmask to be set as broadcast address
Related to bnc#1003091
- Implemented SolverRepositorySUSE
Add support for SUSE online and media repository types
- Add repo_type info to Uri class
This allows to eliminate the repo_type from the paramter list
of the SolverRepository class, which then only needs an instance
of Uri
- Implement SolverRepositoryBase
Base class and interface for building a SAT solvable from
a given repository
- Added API doc hook for solver path
- Bump version: 8.24.9 ? 8.24.10
- Delete sphinxcontrib-programoutput setup
Deleted it from virtualenv development requirements and
from the sphinx configuration file
- Delete use of sphinxcontrib-programoutput
The developers of this sphinx extension decided to delete the
module on pip and also the source from git... it's dead. Thus
I replaced the dynamic usage output in the manual pages with
the static version
- Initial structure to support SAT solvables
A SAT solvable can be used together with python-solv to implement
performant package solving tasks. This is the initial structure
to allow the creation of such solvable files from specified
repositories. We will support the repo types yast2, rpm-md and
rpm-dir in the first place.
- updateOtherDeviceFstab did not get the fstab location parameter
This is port from the kiwi v7 code base openSUSE/kiwi#610
- Load the default unicode font in grub2
This commit fixes #179. The default font was never loaded,
the loadfont call for the default was missing.
- Bump version: 8.24.8 ? 8.24.9
- Fixed waitForStorageDevice
Value for storage_size was not really used
- Bump version: 8.24.7 ? 8.24.8
- Make sure kiwiserver/kiwiservertype is used
If kiwiserver and/or kiwiservertype is specified on the
kernel commandline they should take over precedence for
up- and download of image files compared to the host
setup in the IMAGE variable.
- Don't mix python module requirements
The tox setup mixes the deps modules depending on the
tox target with either
or fixed deps lists in tox.ini. This change clean up
the module dependencies for development targets to
be taken from exclusively
- Update travis runtime requirements
Installing python modules from source via pip requires git
- Bump version: 8.24.6 ? 8.24.7
- sphinxcontrib-programoutput no longer on pypi
Use the version from git directly to build the documentation
In the long we should find an alternative for this sphinx
- Fixup root init with existing host cache
Creating a new root init with a shared location which already
provides directories of the system failed on init of those
directories. Only create the not yet existing directories
- Fixup the wicked thing again
- Put setupNetworkWicked in line with former dhcpcd
The way setupNetworkWicked implements the dhcp discovery was
incomplete. This Fixes bnc#1003091
- Fixup assembling of mdraid array
when udev discovers an mdraid array it partially starts the array.
That is interfering with the mdadm --assemble call by kiwi which
leads to a busy state and an array in inactive state. Therefore
the method should wait until the raid array really exists no
matter if the assembling is started by udev or kiwi's mdadm call.
In addition if the array got assembled but is incomplete because
devices are missing or the timout is fired, an additional call to
start any array that has been partially assembled is required.
pxeRaidAssemble will throw an exception if after this call no
md device with a size > 0 will show up after a timeout. This
Fixes bnc#1000742
- Fixup waitForStorageDevice
The function will return success if the size of the storage
device can be obtained and is greater than zero. The pure
success on reading from the block layer is not enough. In
order to actually work with the device it must provide a
size > 0. Related to bnc#1000742
- Bump version: 8.24.5 ? 8.24.6
- Fixup initial directory creation for new root
During testing of alternative cache locations an init
problem with the var/ directory was observed
- Do not allow imageinclude for images build in obs
Fixes #178
- SystemPrepare instance delete before runnig SystemSetup
This commit fixes#175, now multiple profiles in OBS are possible using
kiwi boot initrd.
- Use docopt's default value feature for cache dir
- Cleanup unit tests using sys.argv
The tests should restore to the default argv option set
as provided by the test_helper
- Update manual page
Include information for new --shared-cache-dir option
- Added global option --shared-cache-dir
The option allows to specify an alternative shared host_to_image
cache directory. The default location is /var/cache/kiwi.
Fixes #92
- Fixed a couple of constraints
- Redo of with updated generateDS
- Initialize the systemd machine ID on first boot
The systemd machine id is considered to be a unique information
Thus it is required to initialize it on first boot of the image.
If the image uses the kiwi boot code (initrd) this action is
performed and and Fixes #169
- Bump version: 8.24.4 ? 8.24.5
- Some tests slightly modified in order to improve coverage
This commit improves some example kiwi files and tests in order
to achieve a 100% code coverage.
- Corrections on test kiwi description files
Some attributes needed to be changed in the test xmls. With this
commit all the description files are consistent with the new co-
occurrence constraints.
- Co-occurrence constraints included in the schema
Constraints for pxe, iso, vmx, oem and docker image types have
been included.
- config.partids only required for kiwi initrd
If dracut is used as initrd system an unused config.partids
file is generated. The partition id information is only used
by kiwi boot code not by dracut boot code. Related to
- Bump version: 8.24.3 ? 8.24.4
- Make sure dracut initrd is copied correctly
- Fixed a rounding error in partedMBToCylinder method
bc truncates number of cylinders to zero decimal places, which results
in a partition that is slightly smaller than the requested size. Add one
cylinder to compensate.
- Integrating Schematron syntax in schema
Using Schematron syntax in schema co-occurrence constraints can
be easily defined. This commit provides the schematron integration.
- Bump version: 8.24.2 ? 8.24.3
- Write fstab to kiwi boot image only
For the dracut initrd system the call happens in the system
root tree which already provides the fstab data
- Bump version: 8.24.1 ? 8.24.2
- Dereference boot arch symlinks
- Bump version: 8.24.0 ? 8.24.1
- Fixed typo in build Makefile target
- Bump version: 8.23.0 ? 8.24.0
- Use format method for messages in image_resize
There are more places where this cleanup from %x format
attributes to the format() method is required. Here it is
done in the scope of the image resize task
- Bump version: 8.22.0 ? 8.23.0
- Fixed custom install target
Make install method aware of --single-version-externally-managed
This option is passed to the call by pip if not installed as
- Added setuptools to development requirements
- Delete travis pypi deployment
After weeks of try and error, this simply does not work for me
Manual deployment via make pypi and a local account works fine
Maybe this can be solved in the future but for now I can live
with a manual step
- Package kiwi/boot/arch into sub archive
The sdist target runs into an infinite loop if installed via
pip. It seems the symlink files below boot/arch confuses
- Bump version: 8.21.1 ? 8.22.0
- Revert "pycparser 2.15 does not play well with xattr"
This reverts commit 428436988d1db1017adfb6e92dbc3235d54e06b3.
- Only resize disk format if required
Only resize the disk format if the raw disk has been changed
If the size of the raw disk is the same as the requested size
just print a message to the user
- Simplify help call
- Smarter way to calculate bytes from a size unit
- Explicitly bool check for the service name option
From docopt we expect a True/False value for the selected
service name positional parameter. Thus the code should
also make it clear what we expect
- Use format method instead of printf like style
- Update resize_raw_disk method
Do not resize the disk if an attempt to resize to the same
size was made. Do not fail in this situation but indicate
via a bool return value if an action has happened(True)
or not(False)
- Use latest version of pip for tox setup
- Revert "Fixup travis setup"
This reverts commit ee9e633d78833d02a535e6f4d2ce775425082872.
- Revert "Fixup travis.yml"
This reverts commit 1c80841e8c264ba1957e2ae6b53d2af2929479b0.
- Fixup travis.yml
Make sure python-tox gets installed
- Fixup travis setup
No need to install requirements, this is all done by tox
- pycparser 2.15 does not play well with xattr
Use pycparser 2.14 in and virtual env requirements
- Fixed install target
pip calls the install target but not the build target.
For kiwi's tools this means they need to run the tools
compilation if not already done prior to the installation
of the tools
- Call dracut in system root tree
Change BootImageDracut class to call dracut in the specified
system root directory and not in a self prepared new root environment.
dracut reads scripts and dracut module configurations from the
installed system components, e.g kdump. Therefore calling it
from an isolated runtime environment creates an initrd which is
not matching the system components. Fixes bnc#1005246
- Added kiwi image resize command
The image resize command allows to resize a disk image
and its optional disk format to a new disk geometry
- Added manual page for image resize command
- Add raw format to subformat factory
- Allow ftp:// uri style for package repositories
- Add grub2-efi-modules in rhel boot descriptions
This package provides the efi modules which are needed if
a custom efi module is build by kiwi via grub2-mkimage
- Fixup doc string for target_removable attribute
The default behaviour was not explained clear enough
- Added resize_raw_disk method in DiskFormatBase
Allow to increase the disk geometry of a disk image file
in order to create free space on this disk
- Handle target_removable in kiwi disk builder
- Handle target_removable in kiwi boot code
- Store kiwi_target_removable in profile env
- Added target_removable attribute
Indicate if the target disk for oem images is deployed to a
removable device e.g a USB stick or not. This only affects
the EFI setup if requested and in the end avoids the creation
of a custom boot menu entry in the firmware of the target
machine on first boot. This is related to bnc#993130
- Use XML parser to test XML output for info.xml
- parenthesis in imports only for multi-line imports
- Delete unused textwrap import
- Move info.xml test data into its own file
- Fixup code smells per review
Only import what is needed, concat strings by a join
- Create info.xml file for btrfs snapshot
If the system is installed into a btrfs snapshot a metadata
file called info.xml is created which is used by tools like
snapper. Fixes bnc#1000117
- Cleanup use of cache location
- Updated hideSplash method
hideSplash method now hides the splash image regardless of an active
console is detected or not.
This commit is port from openSUSE/kiwi#601
- Fixing wrong spaces
- Updated fetchFile method
Now it makes sure the splash is hidden before showing any progress
This commit is port from openSUSE/kiwi#601
- Bump version: 8.21.0 ? 8.21.1
- Fixup wicked DNS data validation
wicked provides DNS info in DNSSERVERS with a space as
separator and not with a ',' as it was the case in dhcpcd
- Do not bundle the raw disk if a format is setup
Only bundle the compressed version of the .raw disk image
if no disk format like qcow2, vmdk, etc... is specified.
Fixes #159
- Do not compress disk formats
Stay compatible with the former version of kiwi and do not
compress disk formats like qcow2, vmdk, etc... It also does
not make much sense since the disk formats itself are using
a compression algorithm. Fixes #159
- Support yum repository priorities
yum normally installs the latest version of a package, regardless of
which repository provides it. The yum-plugin-priorities provides a
method to prefer a package from a repository with a higher priority.
Fixes #153
- Bump version: 8.20.22 ? 8.21.0
- Fix attributes_not_used helper script
The script is used to check which parts of the XML schema
are not used by the new (kiwi v8) version. The information
is helpful to find missing or obsolete attribute handling
in v8 vs. v7
- Modified few code lines to match landscape's quality standards
- Use tmpfs for write overlay in netboot via nbd/aoe
- Added support for multiple `--add-profile` options
- Added '--add-profile' option in compat mode
This commit fixes #154. With this, the compatiblity mode accepts
the `--add-profile` option which was present in previous kiwi
versions and that is translated to `--profile` in the current
- Add set_property_readonly_root for volume manager
The custom option root_is_readonly_snapshot is evaluated
for the method set_property_readonly_root(). If set and
the root filesystem has been installed into a btrfs snapshot
the filesystem is turned into read-only mode
- Evaluate root_is_readonly_snapshot in disk builder
- Added btrfs_root_is_readonly_snapshot attribute
The attribute allows to specify if the root filesystem should
be set to read-only if it is created as a btrfs snapshot.
The option only has an effect if a btrfs snapshot is used as
root filesystem. Fixes bnc#1000080
- Bump version: 8.20.21 ? 8.20.22
- Added test for -udf flag for genisoimage/mkisofs
- Added forcing UDF filesystem for large images
Included -udf flag to force UDF filesystem usage
- Fixed secure boot setup for iso media
Provide the shim loader and the shim signed grub loader in the
required boot path. Normally this task is done by the shim-install
tool. However, shim-install does not exist on all distributions
and the script does not operate well in CD environments from which
we generate live and/or install media. Thus shim-install is used
if possible at install time of the bootloader because it requires
access to the target block device. In any other case the kiwi
fallback code applies
- Added support for mkisofs
genisoimage and mkisofs tools are slightly different so this commit
makes sure all flags are supported in both tools.
- Fixed hybrid setup for large ISO images
The isohybrid tool uses fseek() to locate the bootloader files.
That's unfortunately not 64-bit safe. In case of an ISO image
bigger than 4G this leads to 32-bit offset issues. kiwi can
workaround this problem by putting the bootloader files near
the top of the iso image, which is done by a change in the
sortfile of this commit
- Added rpm_excludedocs handling for yum
rpm supports the --excludepath option. However, yum can not be
configured to pass along options to rpm or the python interface
it uses. Thus only a warning about excludedocs not being
supported by kiwi for yum is issued. Fixes #133
- Added rpm_excludedocs handling for apt
Setup the appropriate dpkg options to avoid the installation
of manual pages and package documentation if rpm_excludedocs
is set in the kiwi XML description. Related to #133
- Make sure netboot code populates kiwi_RootPart
For disk based images the file config.partids is written and
imported. However, for netboot stations a disk is optional
and no partids information exists. In order to provide at
least the partition number for the root partition on netboot
stations with a disk, the kiwi_RootPart is exported from
the provided client configuration file. Fixes bnc#1000194
- Bump version: 8.20.20 ? 8.20.21
- Call grub2-install as chroot operation
In addition to the chrooted call make sure all volumes from
the volume manager (if used) are mounted at call time
- Fixup grub default module list
The test module is a required module in any case
- Make sure fstab exists in initrd creation system
- Umount volumes prior to bootloader installation
- Bump version: 8.20.19 ? 8.20.20
- Respect setup of devicepersistency for swap part
If a swap boot partition is requested it should be added
to the fstab file according to the device persistency
setup or its uuid default
- Update schema documentation
- Bump version: 8.20.18 ? 8.20.19
- Respect setup of devicepersistency for boot part
If an extra boot partition is requested it should be added
to the fstab file according to the device persistency setup
or the default uuid persistency type
- Only sync .mod grub2 module files
When syncing the grub2 modules to the boot directory only the
.mod version of the module needs to be present
- Mount boot volumes on grub install
If there are volumes below /boot they need to be mounted before
grub2-install / shim-install is called in order to make sure all
data is available in the volume
- Bump version: 8.20.17 ? 8.20.18
- Make sure boot image dump is cleaned up
- Refactor DiskBuilder class
The DiskBuilder class is able to build a disk its corresponding
format and the installation image to install this disk by using
the InstallImageBuilder. However all three tasks were handled
in a row which lead to the problem that resources like active
mount processes were still open when e.g the disk format is
created. The race conditions produced here lead to an undefined
state of the resulting disk format and/or install image. In
order to avoid this the DiskBuilder class has been refactored
in a way that each tasks is an atomic operation which is
freeing its resources after success
- Delete root, boot, efi fstab setup from kiwi boot
The kiwi boot code was responsible for setting up the contents
of the fstab file on first boot. However the build process now
provides an fstab with the generic label or uuid based fstab
entries which allows to remove that part from the kiwi boot
- Add root, boot and efi partitions to fstab
Make sure the above partitions are added to the generic fstab
with their label or uuid at build time
- Added BlockID class
Class to provide support for retrieving block device metadata
- Use BlockID class for block operations
- Fixed fstab entries for btrfs subvolumes
mount options must be part of the subvol information which
itself is also a mount option
- Corrected DEVICE_TIMEOUT variable validation
Now it uses regex in order to validate the variable is an integer
- Bump version: 8.20.16 ? 8.20.17
- Normalize mount path in get_fstab for lvm volumes
- Fixed get_fstab parameter order for lvm
- Bump version: 8.20.15 ? 8.20.16
- Delete fstab setup for volumes from kiwi boot code
For persistent devices like LVM volumes or btrfs sub volumes
the fstab setup can be done at build time. Fixes #142
- Custom device timeout variable added
This commit patches the issue bnc#992992. Now DEVICE_TIMEOUT
variable can be used in order to set the device waiting timeout
in watForStorageDevice function. Must be a numeric value expressed
in seconds.
- Implement get_fstab for btrfs volume management
- Fixed btrfs mount_volumes if root is snapshot
The provided subvolume name contained the snapshot path which
is invalid. In addition nested volumes e.g /var/cache were
reduced to /cache which is wrong
- Cleanup unit test
Use only one instance of context manager for all tests
- Create fstab entries for persistent devices
Instead of creating the fstab at boot time, those entries which
are generic and not depending on an unknown device name can be
created as part of the image building process.
- Implement get_fstab for LVM volume management
- Added get_fstab to volume manager interface
The volume manager interface should allow to provide
fstab entries for the volumes it manages
- Bump version: 8.20.14 ? 8.20.15
- Fixed evaluation of Dialog return value
The return code from the Dialog boot code was evaluated after
other shell code was executed. Thus the return code from the
call in question was lost and misinterpreted
- Make sure volumes are mounted prior to install
- Fixup invalid character in bash source
- Bump version: 8.20.13 ? 8.20.14
- Fixup chroot adaption for caller environment
The ZYPP_CONF path is provided as part of the caller environment
and not as a zypper caller parameter. However the path adaptions
when calls happens chrooted was only done for the commandline
arguments but not for the command environment. This patch also
adapts the environment, related to Issue #133
- Make ifplugstatus available in boot images
Added ifplugd to kiwi oem|netboot images for leap and tumbleweed
- Prefer ifplugstatus for link up check
Use ifplugstatus if present to check if the network link
is up. Fallback is the old ip based method
- Fixup theme setup in grub2 config template
Only set the theme if the .txt file describing it exists
- Fixup yum group install
yum groups can contain spaces, thus quoting is required
Fixes #138
- Bump version: 8.20.12 ? 8.20.13
- Follow up fix for setupNetworkWicked
IP address information from wicked is imported twice.
However the plain IPv4 address validation happened only
on the first import. Fixes bnc#992989
- Fixed pxe install archive md5 file
The md5 sum must be created from the uncompressed version
of the disk image
- Added missing trigger file for oem pxe install
The config.vmxsystem trigger file was missing in the oem
install initrd used when deploying a disk image over pxe
- Bump version: 8.20.11 ? 8.20.12
- Integrate schema documentation into doc process
The schema documentation is auto generated via the schema_parser
helper tool. The tox doc target now also generates schema docs
Fixes #53
- Schema docs generation helper
A simple script to parse the RelaxNG schema that grabs relevant
information in order to produce autogenerated documentation from
the schema inline comments.
- Added handling for rpm-excludedocs for zypper
In zypper zypp.conf can be setup to prevent the installation
of %doc marked items from rpm packages. The <rpm-excludedocs>
section in the kiwi XML description is used to provide this
functionality. So far this feature is only implemented for
zypper. References #133
- Make sure EFI modules are provided in uefi mode
For EFI secure boot (uefi) the grub2 efi modules were not
copied to the target directory. shim-install normally does
that by invoking grub2-install. However shim-install does
not allow to call grub2-install with the required parameters
as needed for loop (image) based targets. Thus kiwi calls
shim-install but skips grub2-install and takes care to
provide the needed EFI modules.
- Revert WaitForStorageDevice patch
The logic to setup a wait timeout by asking a device property
from a device which does not yet exist raises a chicken and egg
- Fixed message typo (bnc#996255)
- travis: Update pypi password
Next try to get the automatic deployment on pypi fixed.
- Move to tar.gz as sdist target
PyPI is planning to support only .tar.gz in the near future.
See This Fixes #132
- Activate partition using parted instead of sfdisk
sfdisk changes their caller semantics incompatible. Therefore
we move to a tool which is still stable in the caller options
Fixes #129
- Update baseStripRPM
Method is a noop and only exists for compatibility
kiwi handles the deletion of packages in the core
builder code
- Bump version: 8.20.10 ? 8.20.11
- Revert "Update doc string for"
docopt strings are not allowed to be interrupted by a newline
This reverts commit b1b92ed830820530bfd7bdc5256525f3dfc01a4a.
- Bump version: 8.20.9 ? 8.20.10
- Use os.linesep
Python's os module provides a portable version for the line
separator which should be used whenever possible. Fixes #130
- Bump version: 8.20.8 ? 8.20.9
- Fixed custom entries in vmdk machine config
Each custom entry must be written in a separate line
- Update API documentation
Recall sphinx-apidoc and update the generated result markup
- Update doc string for
Make sphinx happy
- travis: Update pypi password
Next try to get the automatic deployment on pypi fixed.
- Bump version: 8.20.7 ? 8.20.8
- Fixup get_build_type_vmconfig_entries
Make sure we can rely on a list return even if no
machine section exists at all.
- Add evaluation of machine's vmconfig_entry
As part of the machine section it is possible to setup a custom
entry which is stored in the machine configuration file. The
evaluation of such an entry for the vmdk (.vmx) config file
was still missing. This Fixes #122
- travis: Next try to fix automatic pypi deployment
Also the travis command which added the pypi deployment part formatted
the yaml file.
- Fixed bootloader configuration
custom kernel parameters should be added to
Fixes bnc#994910
- Use str.format for int to string convertion
- Setup tests corrected #124
- Fixes #124
- Rearranged waitForStorageDevice code comments
- Added a case statement for transport types
- Removed some backquotes in favour of $()
- Bump version: 8.20.6 ? 8.20.7
- Make repository an optional element
So far one repository was mandatory in the XML description.
However, this is not required because all repositories can
be specified on the commandline
- Added quotes to protect against spaces
- Added getDeviceTransportType method
The method gets the transport type of the given device.
WaitForStorageDevice reacts according to the transport type
by having a shorter timeout in case the device is a usb.
- WaitForStorageDevice patch
The function has been modified in order to distinguish a shorter
timeout if the device is a usb.
- Bump version: 8.20.5 ? 8.20.6
- Update compat options for create step
The --ignore-repos, --set-repo and --add-repo options are allowed to
be specified for compatibility reasons if --create is specified in
the compat commandline. However, they are not used in the next
generation kiwi create step because the repo information is persistently
stored after the prepare step has finished, which is not the case for
the legacy kiwi version
- Support --ignore-repos in compat mode
- Added --ignore-repos for build and prepare tasks
The option allows to ignore all repos configured in the
XML description. This allows to specify a complete set
of repositories via the commandline
- Bump version: 8.20.4 ? 8.20.5
- Preserve timestamp on grub2-install copy
In order to workaround the bug in shim-install which
unnecessarily calls grub2-install we replace the binary
by a noop before calling shim-install. However all file
attributes of the grub2-install binary, timestamp, modes,
etc should stay untouched (bnc#993825)
- Update documentation
Move information about legacy kiwi in its own chapter
- Bump version: 8.20.3 ? 8.20.4
- Update documentation
Prevent to use non public url references
- Bump version: 8.20.2 ? 8.20.3
- Fixup vmdk header update
due to the wrong file open mode the result image was
truncated on update of the vm tools version
- Bump version: 8.20.1 ? 8.20.2
- Update documentation
delete broken links to online ssh key blogs
- Bump version: 8.20.0 ? 8.20.1
- Binary opened file should receive bytes
Avoids TypeError: 'str' does not support the buffer interface
for the vmdk header update
- Fixed setupNetworkWicked
IP address information from wicked dhcp reply consists out of
two parts but we are only interested in the plain IPv4 address
information at this point. Fixes bnc#992989
- Make sure DHCPCHADDR is upercase
Fixes bnc#992988
- Delete obsolete <except> section
The <except> section was formerly used as part of the <split>
section. kiwi no longer supports static split images in favour
of overlay systems based on e.g overlayfs. Fixes #120
- Better logging if Path.which doesn't find the file
- Added docstring for KiwiDescriptionConflict
- Fixup if called with raise_on_error set to False
- indentation fix
- Updated logging message
Updated logging formating in a way that landscape does not complain
- Updated Command to use Path.which and now make use of Path.which in order
to test if the command is available or not. Also Path.which has
been extended in order to support custom environments and to be
able to test file permissions (read. write, execute)
- protect systemd-detect-virt
Protect systemd-detect-virt from being deleted in the kiwi initrd
- Command validation
This commit includes a validation in and
in order to verify the existance of the command before running it.
It case it is not found in the specified environment it raises a
KiwiCommandNotFound Exception.
- Detailed schema validation report
This commit adds the execution of a jing process if the validation
fails, that way the user has more information about what is
actually failing during the validation process. If jing command
is not found, it just produces an info message to warn the user
and kiwi finalizes as expected.
- Workaround Fix for pypi travis deployment
Use all_branches: true, as we do only tag with bumpversion for
a release this workaround works for us. For reference see
- Bump version: 8.19.6 ? 8.20.0
- Fixed suseSetupProduct
Avoid shell complaining about binary operator
- Fixed baseUpdateSysConfig
Check if referenced config file exists
- Delete obsolete use of SuSEconfig
SuSEconfig was a tool long time ago and does not exist anymore
- Delete obsolete sysV init boot code
Traces of chkconfig, inittab, etc/init.d are gone now
- Fixed suseSetupProduct
Fixed shell variable evaluation syntax
- Less complex user, group traversal
- Simplified example config file
- Updated get_users and get_user_groups methods
Get_users method has been updated in order to be able to append the
groups attribute when a user is defined in multiple <users> sections in
the description file. Appart from groups, all other user attributes
are ignored if the user was already processed when parsing the description
Get_users_groups method has been also updated so it returns a list of
groups with unique values, keeping the description file order.
- Updated xml_state
The changes here modify the method get_users in xml_state in order
to provide a simple list of users instead of nested lists. Also a new
method to get the groups for a given user has been included in
xml_state. This is done in order to slim down and facilitate the
code in kiwi/system/ This way users and groups can be handled
in more natural way.
- Rebuild RNG schema and parser for 6.4
- Auto validate XML descriptions for schema 6.4
- Added schema conversion convert63to64.xsl
- Bump kiwi schema version 6.3 -> 6.4
- Fixed 6.2 to 6.3 XSL conversion
Deletion of attributes of the same section must be
handled in one iteration
- Updated the user schema layout
Now each user item may or may not have a groups attribute. The
groups attribute is a comma separated list of group names. If
present the first group name will be the login or primary group,
if not present, the underlying toolchain will assign the default
login group for that user.
- New generated schema and parser
- Some corrections needed after rebuilding schema and parser
- Update true/false handling of text nodes
The latest version of generateDS handles <section>true|false</section>
text values in a way that it returns a boolean python type instead
of the text string. With this change the kiwi code has to be adapted
at the level of writing the shell profile which needs the string
value of boolean information
- Regenerate data structures
Regenerate xml_parse with latest version of generateDS.
The call works in the python2.7 tox virtual environment
as part of the following make target:
$ make kiwi/schema/kiwi.rng
- Switch to latest version of generateDS
Data Structures are auto generated from the XML schema.
So far the development environment has requested an older
version of generateDS which will go out of service soon
- fixing user schema layout
- Fixed typo in boot headers OpenSuSE vs. openSUSE
- Fixed typo in translation OpenSUSE vs. openSUSE
- Make sure awk is available in oemboot
- Explain why bytes type is redefined
In python2 bytes is string which is different from the bytes
type in python3. The bytes type from the builtins generalizes
this type to be bytes always. However the redefinition of the
bytes type is marked as Smell in landscape. Thus the code
should at least inform why this is done
- Use six.Iterator instead of global object builtin
The use of six.Iterator as base class for the CommandIterator
seems more clear and explicit compared to the global object
type overwritten by the builtins import. Fixes Smell reported
by landscape
- Added kiwi/archive/tar class description
- extending kiwi/archive/tar
- Fixing gce format build
The patch is two fold, first it fixes the name of the raw disk
when it is copied as disk.raw. Second it fixes the content list
of the tarball to be dynamicly build instead of a static allocation.
Reason for this change is that the list of files depends on the
XML description whether or not a gce disk tag is configured.
Fixes #113
- Fixes #111: Included support for vdi format
- Bump version: 8.19.5 ? 8.19.6
- Fixed changelog generator
- Don't ask to start recovery in unattended mode
If oem-recovery is setup in the XML description along with
oem-unattended set to true as well we don't ask for confirmation
to run the recovery when the recovery menu entry is selected
at boot time
- Release automatically on pypi (2nd try)
Last try from 142ca22d8e was not working. Update the secure hash
and also set explcitly the master branch when looking for tags.
- Added integration build test link to doc index
- Bump version: 8.19.4 ? 8.19.5
- Don't require an iso creation toolkit
- Bump version: 8.19.3 ? 8.19.4
- prefer newer overlayfs mount method
mount succeeds in compat mode but this mode should only
be used on older overlayfs implementations
- Bump version: 8.19.2 ? 8.19.3
- Message commit for bug reference
Fixup of VMware disk tag references (bnc#988086)
- Prevent duplication of context manager in test
- Bump version: 8.19.1 ? 8.19.2
- Complete doc string for Path.which method
- Implement Path.which
Python provides methods to do this but we can't rely on them
to be available in all python versions
- Conditionally prefix encoding to vmware disk tag
Prior code was always adding the encoding statement to vmware disk tag;
in the event it is already present there's no need to add it a second time.
See also
- Remove null padding on the vmware disk tag
The block of data read via dd is null padded; adding the tools data after
the padding breaks detection of the data. We need to remove the nulls (0x0)
so appends can occur adjacent to the block of strings.
See also
- Update documentation
Cleanup structure of contribution guide
- Update documentation
Complete documentation about required C libraries which
needs to be installed prior to setting up the python
virtual development environment
- Fixup dependency on genisoimage
Only for SLE12 the package requires genisoimage for
any other distribution mkisofs is required. The community
variant with genisoimage seems to be quite outdated.
However, on SLE12 only genisoimage exists. Fixes #106
- Lookup tool name by path lookup
- Update import statement
parenthesis only needed for multi-line multi-import
- Refactor block depth on get_volumes
return early if the condition makes it clear that there
is nothing more to do in this method
- Lookup iso creation tool
Instead of strictly using genisoimage allow for using
either the community variant or mkisofs as provided by
- Refactor reading of volume variables in boot code
Use new style profile variables without name limitations
Related to #39
- Refactor profile for volume setup
Don't use volume names in bash variables. In addition that
removes the name limitations we had for volume names
Related to #39
- Delete obsolete volume condition checks
No need to check for LVSwap or LVComp in volume setup.
If at all those volumes are created at boot time.
Related to #39
- Refactor use of kiwi_allFreeVolume_
Do not expect the value to come from an exported variable
Instead a method to provide the information is implemented
Related to #39
- Bump version: 8.19.0 ? 8.19.1
- Fixup cleanup of intermediate config files
kiwi uses e.g etc/hosts from the host system for proper name
resolution during the build. The temporary variant of that
file will be deleted by kiwi at the end of the installation
process. However depending on the package manager and the
distribution it could happen that the intermediate config
file added by kiwi is treated as existing config variant.
In case of rpm a .rpmnew file variant of the config file
is created and that needs to be handled by kiwi. Therefore
this patch adds a private restore method for the .rpmnew
case. It might be needed to add other restore methods to
deal with this issue depending on how other (non rpm) based
package managers handles the situation. Fixes #104
- Bump version: 8.18.9 ? 8.19.0
- Make sure mtab link exists in kiwi initrd
On Debian systems the filesystem tools requires the
presence of the mtab file, thus we make sure this file
exists and links to proc/self/mounts
- Refactor use of dialog program in boot code
Cleanup the mess, provide only one method to run a dialog
Prevent use of subshells for running the dialog program
- Fixed use of shutil.copytree
The target dir must not exist. However in order to force copy
a potentially existing target is deleted before
- udev console init requires kbd_mode on Ubuntu
keep kbd_mode in initrd
- Added oemboot description for ubuntu-xenial
Also add kiwi linuxrc/preinit links for vmxboot
- Allow alternative location for udev console init
yet another name and location for the console init utility
- Remove lxc configuration from docker images
Docker does not use LXC execdriver anymore.
Fixes #40
- Bump version: 8.18.8 ? 8.18.9
- Fix linkcheck in container_builder.rst
- Fix linkcheck in container_builder.rst
- Bump version: 8.18.7 ? 8.18.8
- Update Documentation
Update state of supported distributions
- Apply editorial review changes
- Apply editorial review changes
- Apply editorial review changes
- Delete traces of obsolete code
- Prevent unconditional deletion of toplevel data
The kiwi initrd descriptions calls suseStripInitrd() as part
of the script. This function unconditionally removes
toplevel directories like /home. Instead of deleting the data
it is better to exclude them when the cpio archive is created
- Bump version: 8.18.6 ? 8.18.7
- Added serial console support for isolinux loader
Generate a serial line setup for the isolinux.cfg file
according to the bootloader_console attribute from the
XML description. In addition delete the use of the obsolete
vga kernel parameter and work with the MENU RESOLUTION
ui configuration parameter instead
- Bump version: 8.18.5 ? 8.18.6
- Fixed setup of default install menu entry
The attribute installboot allows to specify the default boot
menu entry in an install image. It can be set to harddisk,
install or failsafe install. The setup of that information
in the bootloader configuration was not properly processed
- Fix landscape Smells
- Update location of build container
- Update dice source link
- Update Dice project location
- Apply editorial review changes
- Bump version: 8.18.4 ? 8.18.5
- Fixed building of install image
If dracut is requested as initrd_system in combination with
building an installiso we have to overrule the initrd_system
setup for building the install image. The code to install
an image is kiwi's oem install code and unknown to dracut.
The process will end up using dracut as initrd in the system
image but kiwi's initrd on the install image
- Delete kiwi-tools from rhel boot descriptions
kiwi-tools is no longer a requirement but an optional package
It contains tools like utimer or dcounter which provides
nice boot timer or progress dialogs for showing data transfer
progress. In the Virtualization:Appliances:CommonBoot repo
we provide mandatory and optional packages used by kiwi if
they don't exist for the target distribution
- Better warning message for root cmdline setup
Under certain circumstance the root=UUID=<uuid> parameter must be
setup in the cmdline of the image. If the required uuid value
is not provided a warning message is shown to the user. This
commit makes the warning message more meaningful
- Extend unit tests for boot image setup
Expect kiwi_initrdname to be set in the profile of
the boot image root system
- Call plymouth only when installed
- Add delete method for profile variables
- Added article about self contained building
The article describes how to make use of the dice
project to control and maintain image build processes
in a contained environment
- Fix grub bootloader template
Keep gfxpayload
- Update bootloader console setup in boot code
Use the variable kiwi_bootloader_console which represents the
setup of the bootloader console from the XML description and
setup the GRUB_TERMINAL configuration option to allow
grub2-mkconfig to pick up the value. If no console setup
exists in the XML description, gfxterm is used by default
- Make bootloader_console availabe in profile
The variable kiwi_bootloader_console is exposed into the
profile environment
- Delete obsolete code
All traces of lilo and elilo are gone now
- Fixed grub2 bootloader config template
Load fonts only when they exist, do not duplicate font
setup in template
- Fixed bootloader theme check
The check for the theme was not always called, but this
is required since the theme check will reset the bootloader
console if no graphics theme could be found
- Bump version: 8.18.3 ? 8.18.4
- Apply back openSUSE 13.2 support
Until Leap42.2 is not yet released we should keep the
support for 13.2
- Added support for setting the bootloader console
Some bootloader e.g grub supports graphics, text and also
serial consoles to hand over the output of the bootloader
menu. With this patch we allow to customize the console
used by the bootloader. So far only grub makes use of the
new attribute
<type ... bootloader_console="serial|console|gfxterm"/>
This references Trello:
- Bump version: 8.18.2 ? 8.18.3
- Fixed typo in message text
- Fixed vmxboot/ubuntu-xenial boot description
dracut should be installed to support initrd_system="dracut"
- Update iso|vmxboot debian boot descriptions
- Fixup ldd check for unused libraries
- Update vmxboot/ubuntu-xenial boot description
Complete description to be usable with kiwi initrd boot code too
- Added baseCreateCommonKernelFile
The stripKernel functions return early if the dracut initrd
system is requested. However it is required in any case to
lookup the kernel and provide a common name kiwi expects
to be present
- Set logger mode to append
- Bump version: 8.18.1 ? 8.18.2
- Add distro flag match for Leap42.2
- Bump version: 8.18.0 ? 8.18.1
- Preserve zypper package cache
zypper deletes the package cache if a repo is removed.
For the purpose of image building this should not happen
- Pass initrd_system to profile
The common functions baseStripInitrd and baseStripKernel need
to be skipped if the initrd system is set to dracut. They
read that information from the exported kiwi_initrd_system
profile environment variable
- Don't delete dracut from boot image environment
If the dracut initrd system is requested we need dracut
to stay in the environment from which it is called
- Fixup copy_boot_delete_packages
if no <packages type="delete"/> section exists in the target
the code does not add the packages to become deleted. This
patch changes the behavior in a way that a new section is
- Add isoboot support for Ubuntu system
Next step to allow creation of Debian based live systems
Related to Issue #37
- Added suse-leap42.2 descriptions
Obsolete suse-13.2
- Update hyper links in project README
- Rename kiwi boot code files
Maintain them as common code base for all distributions
During the years of development it has turned out that
differences in the boot process between the distros
can be handled in one code base. There is no need to
maintain a basically identical copy for the different
- Style fixes: E275 missing whitespace after keyword
- Delete obsolete C tools
- Prevent use of setctsid
setctsid is a suse extension to start a program on a new
controlling terminal. While it is very useful it does not
exist on other distributions which causes a problem in
kiwi's common initrd code. This patch replaces the use of
setctsid with setsid and sulogin
- Open log file in mode 'w' and in utf-8 locale
- Delete obsolete mkinitrd code
This version of kiwi supports only distros using dracut
- Delete obsolete sysV init console setup code
- Make use of utimer in kiwi initrd optional
- Bump version: 8.17.0 ? 8.18.0
- Adapt to common python style
Private methods should start with _f() not __f()
- Prevent temporary files to be synced to image
The package manager instances created temporary package
manager configuration files. The instance destructor and
thus the cleanup of the instance should be called prior
to the sync of the root filesystem data in order to
prevent temporary configuration files to be present in
the image
- Grammar fixes for doc strings
- Syntax change for Importing one module
- Update test_load_schema_from_xml_content test
Read schemaversion from RelaxNG instead of using
a fixed value
- debootstrap errors deserve their own exception
- Avoid glob imports
This could start a series of further changes in the
unit test as we have allowed for glob imports there.
So treat this one as a start
- Add documentation for Exceptions
- Support Tox with interactively positional arguments
Use posargs for py.test, see
- Format message with named format parameters
- Avoid re-assigning variable
- Fixed unit test for profile variables
- Handle XML per content or file more explicit
- Differentiate between Python 2.7 and 3 in doc
- State Python 2.7 in Trove category of
- Refactor RootInit class
Instead of calling multiple subprocesses make use of
the os capabilities for directories, symlinks and
device nodes
- Fixed use of shutil.copytree
- Update ubuntu xenial vmxboot description
Make sure all drivers exists when dracut is called to allow
inclusion of potentially all needed driver modules
- Fix Lithuanian translation
- Fix Ukrainian translation
- Update grub2 config tempplate
Load font collection
- Refactor use of os.walk result
- Integrate python improvement suggestions
- Integrate python improvement suggestions
- don't intermingle suse namespace with debian
- Deleted libxslt-tools from spec template
- Fixup indentation of travis setup
- Fixed license setup in spec file
- Remove unused import (F401) and an extra line (W391)
- Fix tests for Python3
- Fix tests for the XPath processing
- Allow XMLDescription to be loaded also from the XML string
- Release automatically on pypi for new tags
When a new tag gets created, automatically release it on pypi so
we don't have todo it manually.
- Reimplement XSLT processing using LXML instead of calling 3rd party tools
- Added tox 2.7 target for travis
- Fixed creation of password hashes
kiwi uses the openssl command for this purpose but did
not strip the newline at the end of the hash output
- Apply python 2.x compatibility decorators
- Added tox target for python 2.7
- python 2.x compatibility added new requirements
six and future modules are needed for the compat layer
- Fixup grub2 theme setup
We can't expect that specific fonts to exist for all theme packages
in all distributions. The code here should rely only on theme.txt
In addition we check if any theme or font related data is found
in the legacy grub location boot/grub which imho should not be
used for grub2
- Update ubuntu-xenial boot description
No need for a drivers setup here, vmxboot is only the container
to run dracut
- Bring byte strings to Py2 compatibility in ISO
- Make iterators Py2 comptible
- Added boot image description vmxboot/ubuntu-xenial
- Replace '' with patch_open decorator
- Add mock_open and patch_open helpers
- Remove double requirement
- Use ConfigParser from six
- Move urlparse to the Six package
- Remove duplicate key
- Add print function for Python 2
- Add missing init file
- Add Python2 compatibilitiy requirements
- debootstrap installs apt-get
Don't add the specified package manager to the list of
bootstrap packages for apt-get, because that is covered by
- Allow additional bootstrap packages for apt-get
- Don't run apt-get with mounted /dev
- Fixed force-yes option for apt-get
- Allow unattended installation of debian packages
- Added PackageManagerApt class
Support installation/removal of deb packages
Related to #37
- Support for apt-get package manager
Starting to support Debian based distributions also means to support
the deb repository types. This commit adds the RepositoryApt class
to handle deb repositories for image building. Related to #37
- Bump version: 8.16.5 ? 8.17.0
- Added pypi make target for upload
Please note an appropirate ~/.pypirc file and registered
user is required to upload
- switch_root / pivot_root quiet call
- Increase default boot partition size to be 300M
- Delete obsolete isFSTypeReadOnly from boot code
The check was used to detect if a read-only root filesystem
is in use, which can be done by checking if kiwi_ROPart
is defined
- Refactor use of global FSTYPE variable
The kiwi boot code populates a global FSTYPE variable which was
used at several places. However there was no clarity for which
storage device this filesystem value was detected for. Thus
the entire handling has been refactored and there is no global
FSTYPE variable anymore
- Add attribute <type ... overlayroot=true|false/>
Allow to activate the overlay root setup for disk images
- Bump version: 8.16.4 ? 8.16.5
- Update development status
Status :: 5 - Production/Stable
- Don't search for kiwicompat in fixed absolute path
Allow alternative locations from search PATH
- Integrate git attribute setup to sdist command
- Add C tools binaries to git ignore list
- Fixed command class name for distutils
The overwritten build and install commands should not change
their name in order to stay consistent on e.g --help
- Fixed kiwicompat binary lookup
The test for os.path.exists on just the binary name
without a path specification always fails if not
present in current directory. Let execvp do the job
for us
- Fixed entry point for kiwicompat
- Use path lookup for kiwi-ng in kiwi_compat
Instead of a fixed path use the PATH lookup. This would
allow to install kiwi at alternative places as long as
the path is part of the shell search PATH
- Create completion data at build time
- Move all build and install tasks to
In an effort to distribute kiwi on pypi it should not be
required to call make targets for a complete installation.
Therefore the compilation of the C tools as well as the
installation of the man pages and the bash completion
has been added to The spec file to build an rpm
package has been changed to use exclusively
- Delete obsolete .releasetags from
This avoids a warning on build
- Fixed warnings in C written tools
- Bump version: 8.16.3 ? 8.16.4
- Fixed spec file
update-alternatives is used, thus needs to be required
- Support for overlay disk images
overlay disk images uses a readonly root partition and are
overlayed using overlayfs to hook in a cow based read-write
space. This commit implements the basic disk setup.
Implementation to boot such a disk in the kiwi boot code
is still missing, as well as the investigation if dracut
is able to boot such a disk too. References #65
- Bump version: 8.16.2 ? 8.16.3
- Fixed completion generator
In addition cleanup the main docopt definition
- Fixed completion conflict with legacy kiwi
- Bump version: 8.16.1 ? 8.16.2
- Fixed spec file
rpmlintrc file must be mentioned as source
- Bump version: 8.16.0 ? 8.16.1
- Update quickstart documentation
kiwi can also be used as a module in other python3 projects.
An example how to do that has been added to the quickstart
- Bump version: 8.15.5 ? 8.16.0
- Added support for grub2 console switch entry
An additional hidden entry allows the user to switch between the
graphics and the serial console by pressing the 't' key. The kiwi
grub2 template adds this switch if the terminal mode is set to
graphics. The additional entries are only effective of the
grub_platform is set to efi. Fixes #80
- Fixed add_repo for zypper repositories
Always run zypper addrepo in order to make any change in the
repository definition to become effective
- Fixed add_repo for yum repositories
Always create the repo file from scratch in order to make
any change in the repository definition to become effective
- Bump version: 8.15.4 ? 8.15.5
- Split quickstart into two parts
Split the quickstart information into a development and
a user part
- Bump version: 8.15.3 ? 8.15.4
- Added readonly check for persistent data
When creating a partition for persistent data, check
if the device class has the readonly flag set before
trying to write anything there. Fixes #74
- Bump version: 8.15.2 ? 8.15.3
- Fixed removal of a package in XMLState
If a <package> was unwanted in a <packages> section the former
code sets the name of the package to a python None type. This
causes the rest of the code to operate on potential None types
which causes unexpected TypeError's under certain conditions.
Instead of leaving an inconsistent package section the entire
package section reference should be deleted from the packages
instance holding it. Fixes #76
- Exit code for --version call should be zero
- Bump version: 8.15.1 ? 8.15.2
- Set and scripts as optional
- Bump version: 8.15.0 ? 8.15.1
- Fixed landscape smell
Unused variable 'key'
- Fixed landscape smell
Redefining built-in 'help'
- Fixed landscape error
Dangerous default value [] as argument
- Refactor import_description
split code into more readable parts
- Make sure mandatory vmdk settings exists
Even without a machine section configuration the minimum
required information must be presented to the settings
- Added store_to_result for vmdk format
The vmdk format provides more than the standard result
store. for vmdk we need to store the vmdk and the
settings file
- Reduce amount of mountpoint check calls
- Refactor subformat classes
Add a generic store_to_result method which allows to store
the format result files into an instance of Result. This
allows to customize result handling per format when needed
- Create VMware settings file for vmdk subformat
In order to run or convert the vmdk with VMware products a
settings file is required.
- Added dropped features information for lxc
- Bump version: 8.14.2 ? 8.15.0
- Fixed script/archive lookup
If a script or archive is specified with an absolute path
in the image description, kiwi should not assume this path
to exist below the image description directory but just take
the absolute path as it is. Fixes #70
- Load logging at runtime for MountManager
- Runtime checker message fixes
Start with an empty line to improve readability
- Integrate runtime checks for tasks
Call appropriate runtime checks for prepare, create
and build tasks. Fixes #20
- Create instance of runtime_checker for any CliTask
- Fixed building documentation
- Reuse env in tox.ini
Reuse virtualenv directory with envdir. Should speed up things
a bit.
Taken from
- Use more compact config for tox.ini
Rewrite basepython to make it more compact
Taken from
- Add requirements section in Quick Start
* Describe what KIWI needs to run, further requirements, and for development
* Introduce 'ghkiwi' as prefix in "extlinks" to shorten external links and
to make linking to KIWI's GitHub repository more intuitive and consistent.
For example, the string :ghkiwi:`tox.ini` is replaced with
- Added check_target_directory_not_in_shared_cache
Runtime checker method to check if the target directory
was set to - or below the shared cache directory
- Bump version: 8.14.1 ? 8.14.2
- Move creation of mountpoint dir to setup method
The volume management classes should create the temporary
mountpoint directory when it is needed and not when an
instance of the class is created
- Cleanup use of temporary directories
All mkdtemp created directories are created with the 'kiwi_'
prefix. In addition all code parts which leaves tmpdirs in
the system after kiwi is done were fixed
- Bump version: 8.14.0 ? 8.14.1
- Added python3-xattr dependency
- Added xattr checker for DataSync class
The method target_supports_extended_attributes() checks if the
sync target directory supports extended filesystem attributes.
The method is called on sync_data() and will remove the -X / -A
options if provided. A warning message is issued to the caller
if the rsync option list has changed because of the underlaying
filesystem limitations
- Fixed subformat creation
The option -c makes only sense for the qcow2 subformat, whereas
on all other format it cause qemu-img convert to fail
- Use iterator protocol instead of StopIteration
CommandIterator contains already the __iter__ magic method. We don't
need to manually use while and next() in order to advance to the next
=> Code refactored to "for line in self.command" which does exactly the
same job, but is better readable. Plus we avoid the nasty try...except
- Remove kiwi.logger.init() function
The init function is mostly unneccessary and can be directly created
in the kiwi.logger module.
- Remove useless
- Fixup usage messages
- Bump version: 8.13.4 ? 8.14.0
- Added support for custom rootfs label
A new attribute <type ... rootfs_label="name"/> has been added
This Fixes #66
- Update grub2 bootloader template menuentries
Mark all menuentries as --unrestricted. Fixes #64
- Bump version: 8.13.3 ? 8.13.4
- Fixed shared local repository mounts
- Bump version: 8.13.2 ? 8.13.3
- Added evaluation of imageincluded repositories
repositories marked as imageinclude needs to be added
permanently to the image. Fixes #56
- Make xz the default compressor for squashfs
When creating squashfs compressed files use xz as compressor
if not other compressor is specified. Fixes #63
- Added --add|delete package for prepare command
Allow additional packages to be installed/deleted when
calling system prepare. Fixes #62
- Alpha sort option documentation
Alpha sort options in usage and man pages
- Added --add|delete package for build command
Allow additional packages to be installed/deleted when
calling system build. Related to Issue #62
- Fixed completion generator
complete for kiwi and kiwi-ng
- Prevent double render on usage
- Add check_image_include_repos_http_resolvable
Runtime checker method to check if repositories marked
with the imageinclude attribute are using a publicly
available protocol
- Add shared cache location to Defaults
- Bump version: 8.13.1 ? 8.13.2
- Allow alternative if isolinux-config failed
If the setup of the base directory failed because
isolinux-config was not able to identify the isolinux.bin
signature, we create a compat /isolinux directory and
hardlink all loader files
- Fixed typo in message
Fix condition to show the grub module info message
- Use program output for synopsis in documentation
- Provide custom usage message
Instead of the docopt way to show the usage information we
provide a kiwi specific usage information. The usage
data now always consists of:
1. the generic call
kiwi [global options] service <command> [<args>]
2. the command specific usage defined by the docopt string
short form by default, long form with -h | --help
3. the global options
- Fixed loadSELinuxPolicy
enforce policy is located in /sys/fs/selinux
- No authconfig on RHEL >= 7
- Activate SELinux for RHEL systems
Added new boot method loadSELinuxPolicy and call it as part
of the rhel-preinit phase. This put SELinux in enforcing
mode also from the kiwi initrd
- Handle fsmountoptions attribute in all builders
- Refactor custom_args handling for VolumeManager class
Allow for two elements fs_create_options and fs_mount_options
in a VolumeManager instance and pass along the information
to the FileSystem and MountManager instances
- Refactor custom_args handling for FileSystem class
Any FileSystem class can receive a custom_args dictionary
which by defaults ensures the presence of an empty list
for create_options and mount_options. The create_options
are used in the subclasses when the filesystem is being
created and the mount_options are passed to the MountManager
when the filesystem is mounted for e.g data_sync
- Make kiwicompat understand --version | -v option
- Small spelling corrections
Apply title style:
* package -> Package
* module -> Module
* Use backticks for kiwi.* modules to avoid spelling problems
- Update spell-checking wordlist
GitHub, JeOS, KIWI, LXC, squashfs, stderr, stdin, stdout, Submodules,
Subpackages, zypper
- Add "spell" rule in Makefile
Also included in the help target
- Enable Acronyms, importable modules, and builtins
- First draft to "beautify" HTML appearance
* Add GitHub button and "Fork me" widgets
* Add Travis button
* Remove obsolete code
- Bump version: 8.13.0 ? 8.13.1
- Added support for SELinux file security contexts
Systems using SELinux require the filesystem data to be labeled
according to a security context configuration. kiwi now checks
for the presence of /etc/selinux/targeted/contexts/files/file_contexts
and labels accordingly if it exists. This Fixes #52
- Make grub2 installation path lookup dynamic
Not all linux systems installs grub2 below /usr/lib/grub2
For example RHEL7 packages it below /usr/lib/grub. Therefore
kiwi needs to be flexible with this path
- Used :returncode: for sphinxcontrib-programoutput
Fix a warning when calling "kiwi-ng". As the script returns 1,
it is considered to have failed by the program-output directive.
The returncode line fixes that.
See more info here:
- Integrate version string from placeholder
Use |version| placeholder, no bumpversion etc. is needed.
Actually, it's taken from
- Added RuntimeChecker class
An instance of RuntimeChecker allows to semantically check for
error conditions according to the provided image description
and build options. Related to #20
- Spell checking doc and extended word list
- Add filesystem requires in kiwi-boot-requires
In order to have all filesystem creation tools available
when building in the buildservice we need to require them
in kiwi-boot-requires
- Bump version: 8.12.0 ? 8.13.0
- Set ident export-subst git attribute on
- Bump version: 8.11.0 ? 8.12.0
- Fixed documentation link references
Use redirected target and fix broken targets according to
link check on make build
- Fixed typo in documentation
Missing question mark at end of sentence
- Bump version: 8.10.1 ? 8.11.0
- Fixed typo
- Added Legacy KIWI vs. Next Generation chapter
- md -> rst, radically shortend README
- More substantial changes of the doc
* Overall: try to be more consistent
* index.rst
* Move "Supported Distributions" and "Dropped Features" sections
* Quick Start:
* Add abstract
* Add note about automatic link creation
* Move "example appliance description" sections and subsections
further down
* Streamlined "Contributing" section
* Corrected titles and distinguish more between descriptive and
- Remove useless substitutions (placeholders)
- Add KIWI logo
- Move Motivation section from quickstart to index
- Correct heading and remove build status
- Add QuickStart Guide and improve documentation
* Added Quick Start Guide, taken from
* Improve index/main file:
* Shortend main entry page
* Make more headings
* Add feature highlights to draw attention
* Add sidebar with important KIWI links
* Use ordered list of KIWI concept (prep and creation step)
- Add package manager requirements in spec file
- Update README
- Update README
- Update README
- Move program name from kiwi-py3 to kiwi-ng
- Added genisoimage requirement to kiwi spec file
On SLE12 we only have genisoimage, on Leap and Tumbleweed we
have both genisoimage and mkisofs. For the moment both toolkits
produces working iso images with kiwi, thus I chose the save
default with genisoimage
- Be more flexible for isoinfo lookup
isoinfo can either be provided by the community package in
/usr/lib/genisoimage/isoinfo or by the mkisofs package from
J. Schilling in /usr/bin/isoinfo. kiwi should be smart enough
to lookup which tool is installed. /usr/bin/isoinfo will be
- Update README
Added link to documentation
- Try with latest version of travis-sphinx
- ghp-import required for travis-sphinx deploy
- Make sure enchant library is present for travis
- Update tox setup
Update TOXENV targets
- Move travis-sphinx build tox target to script section
- Use tox target for travis-sphinx
- Put travis-sphinx build into script section
- Make travis-sphinx deploy work
It's required to call travis-sphinx build in order to be able
to run the deploy command
- Fixed documentation linkcheck results
- Make sure shared mount directories exists
Create shared directory path on the host _and_ in the
new root directory to make sure the bind mount works
- Update documentation entry page
- Use travis-sphinx to deploy doc to github
- Fixed package requirements
libxslt-tools provides required xsltproc
- Update README for style and markup
- Fixed README, wrong markup
- Update README
Add information how to build with dice
- Add part_msdos module for self build EFI image
- Update tox.ini
Documentation building requires sphinx_rtd_theme and
- Update volume_manager inline API documentation
References #49
- Update utils inline API documentation
References #49
- Update tasks inline API documentation
References #49
- Complete system inline API documentation
References #49
- Use Path.wipe instead of directly calling rm
- Update system inline API documentation
References #49
- Update storage inline API documentation
References #49
- Fixed typo
- Cleanup use of partition id maps
For the partition setup the Disk class uses dictionaries
to map the partition name to the partition number. However
there are public partition names such as 'kiwi_BootPart'
and kiwi internal partition names such as 'boot'. The code
should make it more clear which mapping table is used
- Update repository inline API documentation
References #49
- Update partitioner inline API documentation
References #49
- Complete bootloader inline API documentation
References #49
- Update README
Add chapter about signing commits
- Update README
- Update README
- Update package_manager inline API documentation
References #49
- Update filesystem inline API documentation
References #49
- Update container inline API documentation
References #49
- Update builder inline API documentation
References #49
- Update bootloader/template inline API documentation
References #49
- Complete bootloader install interface
- Update bootloader/install inline API documentation
References #49
- Move get_failsafe_kernel_options to Defaults
- Update bootloader/config inline API documentation
References #49
- Update boot/image inline API documentation
References #49
- Update archive inline API documentation
References #49
- Delete traces of zfs support
- Update inline API documentation
References #49
- Update inline API documentation
- Update inline API documentation
- Update inline API documentation
- Update inline API documentation
- Ignore auto generated code for API docs
- Update inline API documentation
- Update api documentation setup
- package kiwi-pxeboot must not be noarch
We want to specify for which arch we provide it. Thus
it's not allowed to specify it as noarch even though
it provides only noarch data
- Create Initial autodoc structure
Called 'sphinx-apidoc -o source/api ../kiwi'
- Fixup docstring for kiwi/
- Move manual page documentation in subdirectory
Separate api documentation from manual pages
- Update virtualenv development setup
make sure we can build the docu in the development
- Add docstrings for Cli class
References Issue #49
- Fixed ppc setup of etc/default/grub_installdevice
On power grub must be installed into the Prep partition into
the master boot record of the disk
- Add Python 3.5 to be consistent with Travis
- Fixed logger unit test
- Make color output an option
By default no color output is used
- Added missing kiwi-packagemanager provides
The buildservice looks up for a package manager capability
- Fixed spec file
syslinux is not a requirement for the base package
- Check for derived description path in prepare too
- Refactor SystemSetup class
the information about the description_dir is part of the
provided xml_state instance. There is no need to pass that
information along twice
- Fixed use of derived_description_dir
Only in import_description we need to check for both locations
- Make sure import_description preserves archives
- Refactor InstallBootLoaderGrub2 constructor
architecture dependant device setup belongs to the install
method where it is actually needed. That prevents the
construction of the instance to be architecture specific
- Make list of efi grub modules arch dependant
- Revert "Delete efi_uga module from list"
This reverts commit 191d423eb571d3cc08f34b5e4ef15eb6296a6563.
- Delete efi_uga module from list
- add multiboot grub module only on demand
multiboot is only needed for self build grub images in Xen
guest mode
- Don't raise if kversion exits with error
In this case a default value applies
- Activate partitioner support for arm
- Add optional derived_from param to XMLDescription
An instance of XMLDescription can now optionally become
constructed with a path to an image description this
instance was derived from. This is currently used for
building the kiwi boot image to tell the boot image
XML description instance from which system image instance
it was derived from
- Evaluate default video mode for iso images
- Added custom profile for arm/oemboot/suse-tumbleweed
- Update firmware types for arm architectures
Add efi and uefi as allowed types, complete architecture name list
set efi as default firmware for arm
- Added pre/post hooks for bootloader setup/install
preInstallBootLoader, postInstallBootLoader
preSetupBootLoader, postSetupBootLoader
- Fixed architecture dependant tests
- Added support for virtual boot partition on arm
Triggered by the firmware="vboot" setup an EFI setup plus a
raw partition without filesystem is created as first partition.
The size of the partition can be controlled by the vbootsize
attribute. The vboot feature is used by the arm architecture
to provide a space in the partition table for custom code as
required by e.g the chromebook. The final customization of the
vboot space is board specific and can't be implemented in a
generic way in kiwi. For finalizing the vboot space the script
hooks editbootconfig and editbootinstall can be used
This is related to Issue #17
- Rename partition id kiwi_JumpPart to kiwi_EfiPart
This makes it explicit for what purpose the partition
is really used. EFI is not configured the same for all
architectures but what is consistent is that on this
partition an efi image is located to become loaded by
some firmware
- Activate boot partition only for msdos tables
- have tar preserve all xattrs
By default tar will only preserve a subset of the capabilities
with --xattrs. Adding --xattrs-include=* should preserve all
capabilities (e.g. user.*, security.capability etc.).
- Preserve hybrid GPT status on boot
Added createHybridGPT method and setup the hybrid GPT/MBR
table if requested by the XML configuration. In addition
move the partition activation call also into the partition
table finalize method. This is related to Issue #17
- Refactor partition table setup code
Added two methods preparePartitionTable and finalizePartitionTable
which are used to prepare the partition table to allow resizing
and to finalize for partition flags after resizing. This replaces
the updatePartitionTable method
- Delete obsolete GPT fixup code
Related to bnc#825221 code was added to recreate the disk with
a new GPT label. The reason was that parted created a gpt_sync_mbr
partition table when kiwi repartitioned the disk to use the full
geometry. This was an unwanted behavior by parted and causes the
additional code in kiwi. The current parted version behaves
correctly and thus makes this additional code obsolete
- Added support for hybrid GPT
Embedding an MBR into a GPT is required for a collection of
boards, e.g arm rapberry PI. The kiwi configuration provides
a new attribute called
<type ... gpt_hybrid_mbr="true|false"
which allows to control if the GPT should be hybrid or not.
On build procedures which do not create a GPT the attribute
has no effect. This references Issue #17
- Update all XML descriptions to schema v6.3
- Added make valid target to Makefile
make valid applies the latest XSLT processing to the boot
and test image descriptions
- Added XSL stylesheet convert62to63.xsl
auto convert from schema v6.2 to v6.3
- Update schema to version 6.3
- Deleted obsolete split section
- Deleted zfsoptions, fsreadwrite and fsreadonly attributes
- Updated allowed values for bootloader and filesystems
- Delete obsolete support for syslinux(extlinux)
grub2 or the architecture specific loader requirement is
supported but the alternative x86 loaders syslinux/extlinux
were not really used
- Delete obsolete support for uboot
arm boot is using grub2 efi images loaded by a firmware. The
firmware could be uboot but due to the non generic way to
setup the board that it loads the firmware all of these tasks
are handled by custom scripts called via the kiwi
editbootconfig / editbootinstall script hooks. Therefore kiwi
itself does not have to setup or install uboot
- Delete obsolete support for yaboot
grub2 is used for ppc64 platforms, so far no older ppc
platform is supported
- Delete obsolete kernelCheck method
- Delete obsolete support for legacy grub
- Delete obsolete support for split(combined) image
- Delete obsolete support for reiserfs
- Delete support for ZFS filesystem
btrfs is the way to go these days and zfs still has some
proprietary bits in it
- Avoid the copy of the kiwi initrd to /run
the kiwi initrd copies itself to /run/initramfs in order
to have a way to jump into the initrd system from the later
system. However the kiwi initrd is unpacked pretty big
and exists also only for the very first boot.
- Execute haveged in udevStart if fips is enabled
This ensure there is at least a source of entropy for /dev/random
when the fips mode is enabled. Without it, VMware virtual machines
hang at boot (bnc#964204)
- Fixed use of dracut initrd system for arm platform
- Added EFI images name for 32bit arm architectures
- Refactor data subpackage
Move from data to utils, data is generally considered
as text data and not code
- Fixed 32bit x86 builds
Put it all under the ix86 namespace
- Refactor grub2 EFI support
EFI support was target specific to the x86_64 architecture
This commit changes the structure to allow more architectures
supporting EFI. Thus the arm64 EFI support has been added
as a plus
- Add {toxinidir} variable for check target
- Delete nose reference from virtualenv setup
- Prevent file duplicate badness in spec file
- Revert "Added pv kernel profile"
There is no kernel-pv
This reverts commit f0c37709e941e18a1f9b963811a85bd772ee96ac.
- Move from nose to pytest
nose is no longer maintained, thus we have to move to another
testing system. This commit updates the tox setup and all tests
to use pytest instead of nose.
- Fixed boot mount path at grub2 install
- Revert "Revert "Call shim-install with --removable""
Try again using --removable for shim-install
This reverts commit e3d7d0239d58e901e7d61e215317b93cf0ee1bfb.
- Fixed normalizing paths between host and image
- Revert "Call shim-install with --removable"
With --removable shim-install does not work for image building
This reverts commit d03baa9ee1d0ff44c76afadfc388791b1c5d29fa.
- Added pv kernel profile
- Add handling for OPAL firmware setup on ppc64
This adds a capability of creating an image for Bare metal POWER
platform, where firmware parses grub2.cfg and simply kexecs into
an image kernel
- Refactor FirmWare class
provide a default firmware for each supported architecture
Avoid special sauce in the FirmWare constructor
- Adding opal firmware type for ppc64 architectures
- First draft of issue#43
Add templates for contributing, issue, and pull requests
- Call shim-install with --removable
The --removable is to prevent shim-install from writing host's
uefi boot entry by pretending itself as removable disk
- Delete obsolete shim setup code from kiwi
Due to the use of shim-install the code in kiwi to setup
for secure boot is no longer needed
- Use shim-install to setup EFI secure boot
- Fixed completion generator
Some global options were missing
- Update README
Fixed pyvenv call to use python3
- Update README
style fixes
- Update README
Fixed url to packages on the buildservice
- Update README
Be more clear about semantic versioning as documented here:
- Continue Refactor into subpackage
Move container_setup from toplevel into container.setup
- Fixed completion generator
The generated completion code was confused by the -py3 in the
program name if used with kiwi-py3
- Continue Refactor into subpackage
Move task classes into tasks namespace
- Move storage and subformat tests to match namespace
- Move builder test cases to match namespace
- Continue Refactor into subpackage
Move DataSync, Checksum and Compress into the data namespace
- Continue Refactor into subpackage
Move Kernel class to system namespace
- Package new system namespace
- Continue Refactor into subpackage
system install, update, size, users, result should have their own namespace
- Consolidate all rsync calls into DataSync class
- Release mount after data sync for volume managers
- Fixed LVM volume setup for oem image type
For the oem image type the requested volume sizes are applied
on first boot of the appliance. Therefore inside of the image
the volumes only needs to be created with their minimum required
- Refactor use of kiwi_LVM_ profile variables
Reduce code duplication and encapsulate the reading of the
data from the profile into a readVolumeSetup function.
This is related to Issue #39
- Preserve extended attributes in tar archives
tar doesn't preserve extended attributes by default, causing Docker
images to not have any correct set-capabilities bits set on binaries
such as ping. This is fixed by adding the --xattrs flag to the tar
- Sort output from helper/kiwi-boot-packages
- Fixed gce disk format
The order of the files in the tarball is important. The first
entry must be the manifest.json followed by disk.raw. In addition
the style of the manifest.json has been adapted too. A space after
colon seems to be required for gce to accept the data
- Fixed kernel names for dracut initrd system
If dracut is used as initrd system we should not use the
kiwi one shot names linux.vmx, initrd.vmx but stick with
the official naming convention for kernel and initrd which
is kernel-<version>, initrd-<version>
- Skip local repos if they don't exist
Instead of raising an exception if a local repository does
not exist, we will continue with a warning message. This is
needed for a flawless integration with the buildservice.
Inside of a buildservice environment only those repos are
setup from which packages were taken. Thus it can happen that
a configured repository does not exist in the buildservice
build environment if the resolver would not take any package
from this repository. kiwi should not fail to build such an
- Avoid lvcreate to ask for wiping swap signature
When kiwi creates the logical volume for the swap space
and there is already a swap signature at the place on
disk, lvm stops and asks what to do with it. This should
be generally avoided at that stage in the boot process
Fixes (bnc#968601)
- Calculate checksum in chunks
- Don't prevent an oem image from a custom disk size
An oem disk ist a self expandable disk and thus it normally
doesn't make sense to specify a disk size for it. However there
are filesystems like btrfs which are very hard to precalculate
a minimum required disk space for X bytes of data. In this
situation a user should have the opportunity to specify a
- Don't call dracut in background from kiwi initrd
This was useful to speedup the boot but opens a potential
race condition if a reboot happens while dracut is still
processing. With the last extension to use dracut as initrd
system people now have the choice what fits their needs
better and this allows us to revert the background call
- Added support for using dracut initrd
As of today only the kiwi initrd could be used with an image
build. This commit adds a new initrd_system attribute and
allows to select between kiwi and dracut as initrd system.
Please note the dracut initrd does not support all features
of the kiwi initrd. This fixes #25
- Add a feature drop list to the README
- update due to structure changes
- Update README
Use the real executable name for the documentation
- Continue Refactor into subpackage
storage operations should have their own namespace
- Continue Refactor into subpackage
container and container_setup should have their own namespace
- Continue Refactor into subpackage
disk namespace init is not a factory, thus the Disk class should
have its own namespace. We choose
- Continue Refactor into subpackage
rename dformat to subformat
- Continue Refactor into subpackage
The builder classes should have their own namespace
- Fixed update alternative setup for kiwi completion
kiwi itself is provided as update alternative for kiwi-py3
Thus the completion should be based on kiwi-py3
- Refactor into subpackage to fix #23
Codecoverage are 100% and tests are green
* Refactor archive_*.py -> archive subpackage
* Refactor partitioner_*.py -> partitioner subpackage
* Refactor package_manager_*.py -> package_manager/ subpackage
* Refactor bootloader_config*.py -> bootloader/config/ subpackage
* Refactor bootloader_template*.py -> bootloader/template/ subpackage
* Refactor bootloader_install*.py -> bootloader/install/ subpackage
* Refactor repository*.py -> repository/ subpackage
* Refactor filesystem*.py -> filesystem/ subpackage
* Refactor dist_*.py -> dist/dformat subpackage
The name `dformat` as package name is needed to avoid any name
conflicts with the built-in function `format`.
* Refactor volume_manager*.py -> volume_manager/ subpackage
* Refactor boot_image*.py -> boot/image/ subpackage
- Remove unecessary Travis requirements
- Fix check target
Didn't have a basepython line, fixed strange tox error
- Enhanced Contributing, add new Developing section
* Create a procedure in section Contributing
* Add new Developing section to describe how to use tox
- Fixed device map for VolumeManagerBtrfs
The return value from get_device must be a map containing
an instance of a DeviceProvider, not only the DeviceProvider
- Refactor use of mount/umount calls
Provide a MountManager class and handle all mount/umount
calls in instances of MountManager
- Don't write grub.cfg to EFI directory
Originally the file was written there as reference, but nothing
will ever update that file if the real grub configuration changes.
Thus it doesn't make sense to provide this information (bnc#968270)
- Add support for POWER architecture
Implements requirements for the partition and bootloader setup
in order to build images for ppc64 architectures. Fixes #18
- Refactor grub2 bootloader installation
Make use of grub2-install to install the bootloader
- Changed debug log in case of failed command
Also log the stdout data from a failed command. So far we
expected error data on stderr but there are also commands
which print error messages on stdout. It should us at least
worth a debug message with this information
- Use tox in .travis.yml, remove .travis.script
- Fixed helper/kiwi-boot-packages
Take care for packages marked for a specific architecture
- Delete unused helper/run-pep8
- Adapt make flake target to changed tox target
- Add --cover-min-percentage=100 and helper script
- Fixed spec file for kiwi-boot-requires
The meta package for the buildservice has to require
the new python3-kiwi package
- Use --cover-min-percentage=100 instead of coverage
- Replace helper/coverage-check with coverage
Use --fail-under=99 option which fails for tests under 100%
- keep packages in yum cache
- Rename flake -> check, move spell
* Move spell target/step to doc.spell
* Call doc.spell in the doc target/step
* Rename flake to check (to make it independant of any tool)
- Spelling fixes
- Tox setup updates
Integrate with Makefile, delete pep8 target from Makefile,
use flake8, update travis script, delete coverage reference,
we want 100% anywhere
- Fixed raid_device_test
The test did not mock os.path.exists and thus could fail
on systems which uses a raid system
- Update word list
- Remove empty line to avoid error message
Avoid following error message:
CRITICAL **: enchant_is_title_case: assertion `word && *word' failed
- Activate personal spellchecking dictionary
- Open travis check for all branches
- Added kiwi-filesystem provides to spec template
The main python3-kiwi package provides support for these
filesystem image types
- Integrated Tox
* First incarnation of tox.ini
* Extend
* Add doc/requirements.txt
* Extend with 'sphinxcontrib.spelling' extension
* Add wordlist to doc/source/spelling_wordlist.txt
* Add flake8 section in setup.cfg
- Fixed cmdline lookup
Only check contents of cmdline if it is not None
- No fdupes checking required anymore
- Don't track root/usr/share/locale in boot images
The data there is now generated by the make po target
- Fixed fuzzy i18n for en_US/LC_MESSAGES/kiwi.po
- Added kiwi-image provides to spec template
The main python3-kiwi package provides support for these
image types.
- Prevent any output if quiet is set
If exec >/dev/null is run before setterm clears the screen,
then "Failed to find cpu0 device node" is displayed even if
quiet is set.
- Fixed shell syntax in grub2 template
Fixes (bnc#961334)
- Refactor suseStripKernel
The way the method downsizes the kernel tree is wrong in
several places and very hard to read. Therefore the code
has been refactored and splitted into task methods which
can run independently from each other. As one result the
kernel tree is not missing any metadata and/or update
weak-updates paths anymore. Fixes (bnc#965830)
- Remove flush before resize filesystem
According to the manpage, -F is flushing the fileystem buffer
caches. which is only really useful for doing resize2fs time
trials. With current Tumbleweed installed on MMC, -F triggers
a Inappropriate ioctl for device while trying to flush error,
and then fails to resize.
- Update arm boot image descriptions
Grub2 adds 35MB to the initrd for no reason on armv6/v7, as
those images use u-boot scripts for booting.
- Fixed checkFileSystem call
In the refactoring fc363cc, the parameters of checkFileSystem got
changed to expect the device name, but one of the invocations didn't
pass down the device name due to a typo.
- Ignore fdasd errors
Like fdisk, fdasd also reports an error when re-reading the
partition table. But the table was written correctly so we
continue for the moment and add a debug message
- Fixed boot image result filename
Has to follow the naming convention
- Fixed pxe builder kernel/hypervisor target path
- Use bytes type with hashlib
- Refactor result bundler
instead of being clever in the result bundler we should be
more explicit when adding a result to the result instance.
Therefore the result.add method now also allows to specify
if this result should be part of a result bundle and whether
it should be placed compressed or uncompressed in this bundle
- Added metadata rpm files to all builders
rpm packages and verification information is now added to
all builder results. Fixes #13
- Fixing code smells from
Fixed issues:
* Unused imports
* Unused variables
* Specify string format arguments as logging function parameters
(log.warning("%s bla" % x) -> log.warning("%s bla", x)
- Ignore backup files
- Added the following system setup methods
export_rpm_package_list and export_rpm_package_verification
Used to provide rpm package metadata and verification information
for rpm based image builds
- Improve doc
* Consistently use KIWI
* Fixed punctuation
* Added zypper ar for adding KIWI's OBS repo
- Fixed unit test read return result
Unit test mocking read should return a bytes array and not
a string because that's what python3 would do in reality
- Fixed path location in disk_format_image result
- Fixed disk format builder
This one was missing the output image name adaptions
- Regenerate xml_parse data structures for python3
- Better error response in debug output
If a fails with an error code != 0 but not data was
produced on the stderr channel, we provide this as information
to the caller
- Port kiwicompat to python 3
- Port helper tools to python3
Also fixes completion to correctly parse the toplevel --compat option
- Do not activate dmraid paritions
Only activate the device itself, not the partitions,
that may also exist. If partitions exist, the UDEV rules
will create the corresponding "_partX" symlinks for each
partition within "/dev/mapper, which is totally sufficient.
- Fixed cut and paste error in spec template
correct the project Url
- Update README
add install information for python3-devel
- Fixed README
wrong reference to env2 where it should be env3
- Update README
- Update travis env to python 3.4
- Port application from python 2.7 to 3.4
For new applications like this kiwi version and its use cases
it is better to base it on a more recent python version
- Fixed bundling container results
Container images are already compressed, there is no need
for the bundler to do that again
- Use pinch_system with force in any case
Deletion of packages should be done with the force flag set.
Otherwise the package manager computes a resolved list for
the deletion targets which causes other packages to be
deleted which is unwanted
- Fixed host to image root data setup
On bind mounts check if the origin path exists on the host.
On copy check if the origin file exists on the host
- Fixed deactivate_systemd_service
Check if the service file exists, if not there is no need
to deactivate an non existing service.
- Use alternatives mechanism for completion file
This avoids the package conflict with the legacs kiwi version
- Weaken kiwi-tools requirement
- Handle 32bit Intel arch as ix86 in boot code
- Allow building 32bit bios images
- Delete %post from kiwi-pxeboot
We do not provide a default config file for the pxe setup anymore.
There is no good default file we can provide here because we don't
know how the user has configured a pxe image. The documentation
should explain how to setup the pxe config and infrastructure with
the help of the static data provided by the kiwi-pxeboot package
- Don't require python-Sphinx at build time
Sphinx is not available on all platforms and required only to
build the manual pages. Thus the make build target can build
the man pages and pack the result into the source tarball
- Don't strip ctc_configure from initrd
ctc_configure is used on s390 images
- Added man page for result bundle command
- Added result bundler
- Added kiwi-boot-requires buildservice meta package
- Delete unused .releasetags helper
Fixes #9
- Update README
- Update README
- Added system update manual page
- Create manual pages
Create man pages for result list, system build, prepare and create
- Added pv xen drivers to boot descriptions
Beginning with SLE12 SP2 the default kernel is a pvops
capable kernel. This means it can be used in a Xen HVM full
virtual machine as well as in a PV - paravirtual machine.
However it's required to keep the paravirtual net, block
modules in the initrd. As their location also has move
an update of the boot image descriptions was necessary
- Fixed wait message in waitFor boot functions
Better indicate for what we are waiting
- Load xen modules by alias only
- Fixed validation of custom root cmdline variable
A variable of the format root=LABEL=x was not correctly validated
- Change default ec2 root_cmdline_parameter
For ec2 based firmware the value root=UUID=x is provided
instead of a static device node
- Refactor internal boot image task
Make a factory out of the task and allow to have e.g
a dracut boot image task at a later point in time.
The BootImageBase class creates an interface for this
implementation. So far only BootImageKiwi is implemented
- Added export_modprobe_setup method to SystemSetup
export_modprobe_setup copies the contents of etc/modprobe.d
to a specified target root directory. The method is used to
transfer the modprobe configuration from the system image
to the boot image
- Fixed archive_builder_test
Mock platform value
- Added compatibility information to main man page
- Put arch and version to output image file name
- Added quick start example to main kiwi manual page
- Fill master manual page with content
- Added git like command completion
Provide a 'Did you mean' log message for unclear task names
- Update README
- Fixed non-executable-script rpmlint warning
- Man pages are below level 2
- Fixed rpm-buildroot-usage rpmlint warning
- Fixed non-executable-script rpmlint warning
- Delete unused .md5 script
- Fixed rpm package build
- Fixed dracut call
Always create a generic initrd, don't pass -H
- Fixed custom args setup for vmdk format
custom args is a hash with option/value pairs. For vmdk the option
could be e.g adapter_type=value and the value is None. This is by
intention because qemu which receives those type of options allows
only the syntax "-o option=value". The kiwi code setting up the
options did not check correctly if there really is a value for
e.g adapter_type
- Allow alternative locations for grub installation
Different distributions install grub2 to different places.
Therefore kiwi should not use a fixed location but allow
to lookup grub data at several places
- Fixed unit test for fix_boot_catalog on big endian
- Fixed unit test for fix_boot_catalog on big endian
- Make sure to cleanup yum requests after processing
- Fixed CommandIterator
check for output before sending an iteration stop
- Fixed stateful copy of repository section
Profiles are not copied because they might not exist in
the target description
- Fixed host to root path patcher
Don't be confused by multiple /'es
- Added support for yum package manager
- Fixed use of iso mounted repositories
When using an iso as repo, kiwi mounts it to a temporary
location. The location is different for each build and
therefore the zypper repo file needs to be recreated for
any new build in this situation
- Check if config file exists
Before updating a config file, check if it exists. If
it is not present skip the configuration and print a
warning message
- Added yum repository support
- Make man install target more stable
- Update source manifest
include only doc Makefile and source, the pages are
build at build time
- Include installation of man pages to spec file
- Added man page templates for all commands
- Added man page templates
Added template for master page and result_list
- Added initial sphinx documentation structure
The documentation will cover kiwi manual pages. more detailed
documentation will be written and maintained in colaboration
with the documentation department
- Fixed use of noglob shell option
- Added support for kiwi --compat
The --compat call will trigger the call of the kiwicompat
tool written to support legacy kiwi commandlines. An example
could look like the following call:
sudo kiwi --compat -- --build /my/description --type vmx -d /my/dest
Please be aware the -- is required to tell docopt to treat all
options as parameters
- Prevent duplicate error logging
- Refactor CommandProcess class
Use an iterator class to run through the process. implement
poll variants explicit and clear structured
- Fixed updateRootDeviceFstab
Support by-label mount entries for btrfs subvolumes
This fixes bnc#964474
- Add kiwicompat to Makefile build and install target
- Update README
- Update README
- Bump version: 8.10.0 ? 8.10.1
- Prepare for package building
- Follow up fix for fstab setup
Use the system installed fstab as default if present
- Support building in buildservice worker
The repo setup inside of a buildservice worker uses a static
path below /usr/src/packages/SOURCES/repos/. We need to adapt
the provided obs uri type to match this criteria
- Don't add kernel filesystems to fstab
Systems with systemd which this kiwi version aims for, doesn't
need proc, sysfs, debugfs and friends to be part of the fstab
This fixes bnc#964472
- Fixed btrfs build with snapshots
- Allow system to be installed on btrfs snapshot
This fixes (bnc#946648)
- Put kiwi_btrfs_root_is_snapshot to boot profile
- Recompile schema and data structures
New attribute btrfs_root_is_snapshot and methods
- Evaluate kiwi_btrfs_root_is_snapshot in boot code
If set it's required to mount the subvolumes like it is
done with lvm volumes. In addition this patch fixes the
update of the fstab file which has to contain an entry
for each subvolume excluding snapshots and the toplevel
This is related to (bnc#946648)
- Added btrfs_root_is_snapshot attribute
This is related to (bnc#946648)
- Added fix_boot_catalog and relocate_boot_catalog
- Prevent duplicate validation of cmdline
- Fixed grub2 xen guest bootloader config
- More modules not present for grub2/x86_64-xen
- There is no multiboot module for grub2/x86_64-xen
- Make sure get_partition_table_type returns a value
- Use bash to call config scripts
- Fixed regular expression pattern
use re.escape to make sure the search string has special regular
expression characters quoted correctly
- Added support for using internal build service
An option --obs-repo-internal was added
- Add support for alternative config file *.kiwi
- Allow to build directly from buildservice checkout
- Fix misleading variable name
- Move default boot timeout to Defaults class
- Fixed boot exclude for zipl case
- Fixed zipl bootloader setup and install
quote special characters in title for menu. refactor the
zipl bootloader install class to know about the boot partition
device node
- Added title quoting method for older loaders
- Move VTOC creation into Disk class
- Fixed missing setup_disk_boot_images for zipl
The interface class implements this with a raise condition
by default. For zipl no bootloader images needs to be created
Thus implement the method and pass
- Fixed typo in list assignment
- Fixed LoopDevice class
custom blocksize value must be passed as string to the
command level not as integer
- Platform fixes for XML tests
- Platform endian fix for vhd tag test
- Platform fixes for unit tests
- Platform mock for grub2 bootloader tests
- Platform mock for grub2 bootloader tests
- Added BootLoaderInstallZipl class
- Activate zipl bootloader config in factory class
- Finished BootLoaderConfigZipl class and tests
- Delete unused patch statement from test
- Added BootLoaderConfigZipl class
The implementation is still unfinished
- Pass the disk device to the bootloader config
As a custom option the BootLoaderConfig instance now
receives the target disk device node. So far this is only
used in the zipl case where it is needed which is the
reason why it is kept as a custom argument
- Allow custom options for bootloader config classes
- Added zipl bootloader template
- Added partitioner_dasd for s390
- Refactor Firmware class
more information from the XML description is needed in order
to make e.g decisions about the partition table type to use
according to the firmware setup in combination with e.g the
target loader type on s390. Thus the class now receives an
instance of the XML state and not only the firmware attribute
- Disable setup of hwclock
hwclock seems not exist on all supported architectures. In addition
the build process should not fiddle with the build host hardware
- No need for a condition if there is no alternative
- No need for a condition if there is no alternative
- Use 800x600 default for grub2 gfxmode
- Close progress line with CR when finished
- Added ImageBuilder factory
- Added system build command
Allows to combine prepare and create into one big task
- Better error message for pickle exceptions
There is no meaningfull error message for pickle.load
exceptions. Thus only provide the exception type and our
own message
- Use pickle instead of marshal
- Fixes for the container builder
in the setup if the files to update do not exist the process
failed. This patch adds a check prior to changing the file
- Make sure the create task creates the target dir
- Fixed result object dump
marshal.dump requires an open file object not a filename
- Added ContainerBuilder
currently supports building of docker containers
- Added ContainerImage class
Factory plus implementation for docker
- Refactor variable name for root directory
If it is clear the source directory is the root directory of
the image the variable should be named root_dir not source_dir
- Fixing landscape issues
- Added ContainerSetup classes
Base and Factory plus implementation for docker
- Refactor user/groups setup
Provide an easier to travers data type in xml_state for the
user and groups. The get_users() method returns a list of
tuples which assigns each user list the group name and id
it belongs to
- Use normpath to avoid double slash in output
- Added kiwi result task
Implementing 'kiwi result list' which marshal loads the
serialized result instance from a previous build and shows
the build results
- Dump the result instance as a marshal dump
- Add clic as supported live media build target
- Added FileSystemClicFs class
- Fixed contents of header_end block
off by one bug
- Finished LiveImageBuilder for overlay iso type
- Added check if UDF extension is needed or not
- Put supported live image iso types into defaults
- Added live ISO grub2 efi template and setup
- pep8 fixes
- Rebuild schema and data structures
- Allow xfs as hybrid RW file system
- Continue with LiveImageBuilder class
Added isolinux bootloader setup, finished live build procedure
Live metadata injection still missing. grub2 efi boot for live
image still missing
- Don't use filesystem specific mount option
When mounting the read write filesystem, prevent using
filesystem specific options like barrier
- Use HYBRID_EXT4_OPTS in fat container filesystem
- Check read write filesystem prior to mounting
If a filesystem type could be identified on the read write
partition check it before mounting to eliminate a potential
dirty state
- Cascade exfat mount
try normal mount first, if this does not work try fuse mount
Normally this is done automatically by the mount program but
if not we will give the direct fuse mount a chance
- Fixed Makefile target to build data structures
A change in kiwi/schema/kiwi.rnc triggers the build of the
schema rng version as well as an auto update of the data
structures via python's generateDS. The intermediate xsd
schema format is only relevant for the data structure
creation process
- Make createFileSystem more robust
When passing in a loop file instead of a device name, the method
should be smart enough to handle the name without shell evaluation
- Added support for exfat as hybrid filesystem
In addition to fat also exfat is now supported as persistent
write filesystem. Because of the limitations of a fat filesystem
fat and exfat are only used as a container filesystem providing
an ext4 linux filesystem as a cowfile. The algorithm to create
the size of the cow file has also been changed to use half of
the size of the write partition or on fat a max size of 4G.
The size of the cowfile is also prepared to become overwritten.
However the XML definition and implementation to do this
is still missing
- Reread partition table after hybrid setup
The hybrid write partition is created via fdisk. Some version
of fdisk does not send the ioctl to let the kernel reread the
table or fdisk itself holds it busy. Thus we actively initiate
a reread via blockdev
- Optimize ext4 hybrid write filesystem options
Optimized for 512kB erase block size
- Use mount options to increase overlay performace
For overlay filesystems not writing into a tmpfs performance is
more important than safety. We use this combination of options
for now, if you encounter stability problems please let us know
- Use -f force option for extX filesystem checker
- Refactor and cleanup setupReadWrite
Fix misleading error message and refactor the code to be less
complex and more clear in the processing of tasks
- Allow custom cowfile name for persistent data
Instead of a fixed name 'cowfile' we allow a custom name which is
predefined in HYBRID_PERSISTENT_FILENAME and prepared to become
overwritten by an XML defintion whose implementation will follow
later. Reason for the change is that a cowfile is visible as
plain data file to the operating system if e.g used on a live
stick. It should be more clear to the user what this file is
good for
- Protect mkfs.exfat from being deleted
Added to the strip tools section in order to keep it in the initrd
- Added support for exfat creation and probing
In preparation to use exfat instead of vfat in a loop container
for persistent data it's required to provide support for mkfs.exfat
- Make loop_setup and loop_delete more robust
The methods did not cope well with filenames containing bash
characters with special meaning e.g spaces. For use with a
iso hybrid cowfile whose name is visible in the OS the methods
should be able to work with any given filename
- Started with LiveImageBuilder class
Added interface and required steps. tests and implementation
are missing and will follow
- Added archive builder
- Added repo handling to compat caller
Also added process execution with translated arguments
- Add compat translation for prepare/create/upgrade
- Added kiwicompat to support legacy commandline
- Added install pxe archive support
- Added warning message if pxedeploy section is used
At the moment there is no class to build the pxe client config
file from information provided with the optional pxedeploy
section. However this is not fatal to the build because the file
could be created manually too. Thus a warning message is shown
which will go away when the pxe client config file creation
has been ported
- cleanup test data to be consistent
- Added recovery setup
- Added DiskFormatGce class implementation
- Fixed suffix name for compressed archives
- Added creation of gnu and xz archives to tar class
- Refactor result collection
Put the creation of a result object into the builder classes
and return them from there. The builder instances knows about
the results not the task instances
- Fixed option handling for vmdk format
- Activate disk format building in disk builder
If disk format and install media is configured together only
the install media will be built and a warning message for
skipping the disk format is shown
- Added custom argument handling for disk formats
- Added DiskFormat factory
- Added DiskFormatVmdk class implementation
- pep8 fixes
- Added DiskFormatVhdFixed class implementation
- Delete unused test data symlinks
- Added DiskFormatVhd class implementation
- Added DiskFormat base class
Also added implementation for DiskFormatQcow2.
More format classes will follow next
- Fixed import of kernel parameters including spaces
Kernel parameters like PRODUCT_TYPE=?PRODUCT BANANA? breaks
the code in includeKernelParameters. This patch allows spaces
for values in a way that it replaces the embedded whitespace
with \030 before parsing and then reverting after parsing.
Thanks to Jay Nitikman for providing the patch
- Fixed LUKS setup for dracut
The system image has to provide /etc/crypttab to allow dracut
to create a working initrd for reboot. In addition the name
of the luks map must be 'luks' to make dracut happy.
- luks setup triggers boot partition by default
- Add LuksDevice class and implementation
Also implemented luks support in DiskBuilder
- Handle /boot/vc files for Raspberry Pi
openSUSE Tumbleweed raspberrypi-firmware[-branding-openSUSE] packages
have been updated to install files to /boot/vc rather than /boot.
Ensure that all files in /boot/vc are provided in image/loader for
further reference
- Refactor file system check in boot code
- Make sure VolumeManager instance updates root map
An instance of volume manager could cause the creation of a new
device e.g in case of LVM. The master device map in the disk
builder has to be updated with this device
- Fixed unconditional lookup of boot partition id
- Package check for packages marked for deletion
If none of the packages to become deleted are installed we
will raise an error, basically to force people to fixup the
image description
- Better error message for call with unknown command
If kiwi is called with an unknown command an error message
showing which commands actually exists should be shown
- Fixed user group creation
The command name is groupadd not addgroup
- Fixed label and UUID support for XFS creation
- Traverse dictionary in ordered mode
- Return sorted lists for packages/archives
- Traverse dictionary in ordered mode
- Traverse dictionary in ordered mode
- Traverse dictionary in ordered mode
- Added __githash__ to
Any time the is changed and committed the git ident
will be reset by git. After a checkout of the ident
will be updated in to the git commit id of
Whenever we relase a new kiwi version the process is as follows:
1. run bumpversion to set the version for the release
2. run tox to create the source tarball for the release
We have to make sure tox calls a git checkout of
- Consolidate use of Makefiles for schema conversion
As we are going to switch to tox the Makefile setup should be
cleaned up. The make targets to build xsd and rng schemas has
been moved to the master Makefile
- Consolidate use of Makefiles for locale setup
As we are going to switch to tox the Makefile setup should be
cleaned up. The make targets to handle po files and their
installation has now been moved to the master Makefile
- Update translation po files with template
- Consolidate use of Makefiles for compiling tools
As we are going to switch to tox the Makefile setup should be
cleaned up. I'm going to move the various places and its tasks
into one master Makefile to make it easier to move the targets
one after the other into a tox setup.
- Refactor source code structure
All files referenced by kiwi should live below the kiwi
namespace and should be referenced by the resource_filename()
method from the pkg_resources
- Update exclude list for boot image runtime data
There are some directories needed during boot image creation
time, e.g grub2 modules to create grub images. But at boot
time this data is no longer required and would just waste
space in the initrd
- Delete dracut from boot images
dracut is needed in the system and also called from there
by the kiwi boot image, but inside of the boot image it is
not needed and just wastes space
- Add some paths not needed in the boot image
- Added boot messages translations
- Exclude /image from boot images
- Change default boot image description path
Let the default boot image description path point to boot/arch
- Make sure the boot image profile provides its name
The variable kiwi_initrdname was added to the .profile
environment for boot image builds
- Update boot image functions
Delete a lot of legacy code from the bash boot code
- Added boot image descriptions
Provide boot(initrd) image descriptions for supported
architectures and distributions
- Fixed unit tests, mock NamedTemporaryFile
- Added coverage to developer requirements
- Use "next generation" string
To distinguish it between old and new KIWI
- Review and add corrections
* Consistent spelling: kiwi -> KIWI, python -> Python
* Add punctuation
* Use backticks for scripts and dirs
- Update development status to be inline with
- Deleted no longer needed bin/kiwi script
- Update README
Added developer information how to contribute
- Minor changes in virtualenv setup file names
Moved the requirements.txt setup files into a namespace
called .virtualenv in order to stay compatible with the
.travis requirement files
- Update development status in
- Fix #5: Improve
- use setuptools always, no need to check for distutils
- include keywords 'include_package_data', 'zip_safe', and 'classifiers'
* setup.cfg:
- add bdist_wheel and sdist section
* Add missing (needed for dist)
* Remove executable bit for LICENSE and
- Fix #3: Requirement for Virtual Envs
* Add requirements.txt and dev-requirements.txt
The dev-requirements.txt installs requirements.txt automatically
* Ignore .env, .env2, and .env3 virtual env directories
- Fix #4: support bumpversion with .bumpversion.cfg
- Added RaidDevice class
implementation in disk_builder
- Fixed hybrid call
offset number should be passed as string to Command
__VERSION__ -> __version__
- Rename __VERSION__ -> __version__
- Added hybrid ISO setup
- Refactor creation of a PackageManager factory
- Refactor creation of a Repository factory
- Refactor creation of a BootLoaderInstall factory
- Refactor creation of a VolumeManager factory
- Refactor creation of a BootLoaderConfig factory
- Refactor creation of a Partitioner factory
- Refactor creation of a FileSystem factory
- Fixed travis setup
- Refactor InstallImageBuilder
no need to provide the name of the disk image, this
information can be created from the xml state
- Fixed missing md5 file on install media
- Travis testing needs cdrtools for isoinfo
- Added two pass ISO creation system
The kiwi ISO's are prepared to be hybrid by adding an
end header block so that isohybrid can place its gpt
header at the correct offset address
- Added user log messages for install media builder
- Fixed grub bootloader template for install case
Template was missing the cdinst option
- Added create_header_end_block method in Iso class
- Added isols method in Iso class
- Fixed ui theme setup in isolinux.cfg
- Added isolinux bootloader support
- Prevent zypper failing on outdated system solvable
- landscape: fix unused imports
- Refactor boot data extraction from boot image
Allow data extraction multiple times, don't move files
away from their original location
- landscape: fix unused imports
- landscape: fix unused variables
- Add debug message for repo cleanup
- landscape: fix unused variables
- landscape: fix unused imports
- landscape: fix dangerous defaults
- landscape: fix dangerous defaults
- Added landscap config file
skip checking auto generated code
- Update README
- Set naster branch for travis setup
- Update README
- Update README
Travis and Landscape status
- Update README
- Update README

==== python-pyasn1 ====
Version update (0.2.3 -> 0.1.9)

- updated to upstream release 0.1.9
- Wheel distribution format now supported.
- Extensions added to text files, CVS attic flushed.
- Fix to make uninitilaized pyasn1 objects failing properly on hash().
- Fix to ObjectIdentifier initialization from unicode string.
- Fix to CER/DER Boolean decoder - fail on non single-octet payload.
- updated to upstrean release 0.1.8 (fate#318838)
- ObjectIdentifier codec fixed to work properly with arc 0 and arc 2 values.
- Explicit limit on ObjectIdentifier arc value size removed.
- Unicode initializer support added to OctetString type and derivatives.
- New prettyPrintType() abstract method implemented to base pyasn1 types
to facilitate encoding errors analisys.
- The __str__() method implemented to Tag, TagSet and TagMap classes to
ease encoding errors troubleshooting.
easing encoding errors
- Fix to SEQUENCE and SET types to give them their private componentTypes
collection (which is a NamedTypes object) so that they won't collide in
a MT execution environment.
- Missing T61String,ISO646String character types and ObjectDescriptor useful
type added.
- Distribute is gone, switched to setuptools completely.
- Missing NamedValues.__repr__() added.
- The base.NoValue() class, that indicates uninitialized ASN.1 object,
made public.
- The base.NoValue() class instances now support __repr__() what makes
possible to perform repr() on uninitialized pyasn1 types objects.
- When comparing ASN.1 types, by-tag and/or by-constraints matching
can now be performed with the isSuperTypeOf()/isSameTypeWith() optional
- Constructed types now verify their consistency by invoking
isSameTypeWith(matchTags=True, matchConstraints=False) and
isSuperTypeOf(matchTags=False, matchConstraints=True) for each of their
components rather than isSuperTypeOf() as it used to be. Constriants check
could be enforced to isSameTypeWith() with the strictConstraints=True
constructed classes attribute.
- Constructed types can now be initialized with new .setComponents() method
which accepts both var-args and keyword-args. Default repr() modified to
reflect this change.
- NamedTypes() and NamedValues() made comparable.
- Test coverage extended to cover pyasn1 types __repr__() function.
- The abs(Integer()) & abs(Real()) operation now returns respective pyasn1
type, not a Python type.
- More Python magic methods implementations added to Integer & Real classes
(e.g. __pos__, __neg__, __round__, __floor__, __ceil__, __trunc__)
- The Integer.__invert__ Python magic method implemented.
- The OctetString.__int__() and .__float__() magic methods implemented.
- Handle the case of null writer at Debug printer.
- BitString encoder/decoder performance improved.
- Built-in debugging is now based on Python logging module.
- Fix to NamedType.__repr__() to work properly.
- Fixes to __repr__() implementation of many built-in ASN.1 types to take into
account all of their initializers such as tagSet, subtypeSpec etc.
- String typed float initializer to REAL type now supported.
- Float typed mantissa initializer to REAL type for base 2 added.
- Encoding bases 8 and 16 support for REAL type binary encoder added.
- More strict CER/DER encoders added for GeneralizedTime and UTCTime types.
- Asn1Item.hasValue() added to easily distinguish initalized ASN.1 objects
from uninitialized ones (e.g. pure types).
- Fix to REAL type binary decoder to handle different bases and scale factor.
- Fix to TagSet.repr() to include [obsolete] baseTag information.
- Fix to broken REAL type decoding handling.
- Fix to BitString and OctetString decoders dealing with constructed
encoding -- it used to be possible to embed other types in substrate.
- Fix to end-of-octest sentinel handling:
* require strict two-zeros sentinel encoding
* recognize EOO sentinel only when explicitly requested by caller
of the decoder via allowEoo=True parameter (warning: API change)
- DER codec hardened not to tolerate indefinite length encoding/decoding.
- Run testsuite in %check
- Reflect license change (from BSD-3-Clause to BSD-2-Clause) which
happened in version 0.1.7 in the spec file
- Require python-setuptools instead of distribute (upstreams merged)
- Fix changes file
- updated to upstrean release 0.1.7
- License updated to vanilla BSD 2-Clause to ease package use
- Test suite made discoverable by unittest/unittest2 discovery feature.
- Fix to decoder working on indefinite length substrate -- end-of-octets
marker is now detected by both tag and value. Otherwise zero values may
interfere with end-of-octets marker.
- Fix to decoder to fail in cases where tagFormat indicates inappropriate
format for the type (e.g. BOOLEAN is always PRIMITIVE, SET is always
CONSTRUCTED and OCTET STRING is either of the two)
- Fix to REAL type encoder to force primitive encoding form encoding.
- Fix to CHOICE decoder to handle explicitly tagged, indefinite length
mode encoding
- Fix to REAL type decoder to handle negative REAL values correctly. Test
case added.
- updated to upstrean release 0.1.6
- The compact (valueless) way of encoding zero INTEGERs introduced in
0.1.5 seems to fail miserably as the world is filled with broken
BER decoders. So we had to back off the *encoder* for a while.
There's still the IntegerEncoder.supportCompactZero flag which
enables compact encoding form whenever it evaluates to True.
- Report package version on debugging code initialization.
- Changes from version 0.1.5:
- Documentation updated and split into chapters to better match
web-site contents.
- Make prettyPrint() working for non-initialized pyasn1 data objects. It
used to throw an exception.
- Fix to encoder to produce empty-payload INTEGER values for zeros
- Fix to decoder to support empty-payload INTEGER and REAL values
- Fix to unit test suites imports to be able to run each from
their current directory
- updated to upstrean release 0.1.4
* A built-in de/serialization debugging facility added
* Package versioning added (pyasn1.__version__)
* Leading sub-OIDs overflow condition handled
* REAL type exponent encoding implemented properly at BER codec
* Boolean BER decoder fixed to allow arbitrary payload
* Leading 0x80 octet now handled properly by DER/CER/DER
ObjectIdentifier decoder
- includes fix needed by python-ldap's module ldap.syncrepl
- updated to upstrean release 0.1.3
- Include class name into asn1 value constraint violation exception.
- Fix to OctetString.prettyOut() method that looses leading zero when
building hex string.
- Fix obsoletes for python-asn1 instead
- remove self-obsoletes
- updated to upstrean release 0.1.2
- Fix to __long__() to actually return longs on py2k
- Fix to OctetString.__str__() workings of a non-initialized object.
- Fix to quote initializer of OctetString.__repr__()
- Minor fix towards ObjectIdentifier.prettyIn() reliability
- ObjectIdentifier.__str__() is aliased to prettyPrint()
- Exlicit repr() calls replaced with '%r'
- fix license to be in format
- updated to 0.1.1
* Hex/bin string initializer to OctetString object reworked
(in a backward-incompatible manner)
* Fixed float() infinity compatibility issue (affects 2.5 and earlier)
* Fixed a bug/typo at Boolean CER encoder
* Major overhawl for Python 2.4 -- 3.2 compatibility
+ get rid of old-style types
+ drop string module usage
+ switch to rich comparation
+ drop explicit long integer type use
+ map()/filter() replaced with list comprehension
+ apply() replaced with */**args
+ switched to use 'key' sort() callback function
+ support both __nonzero__() and __bool__() methods
+ modified not to use py3k-incompatible exception syntax
+ getslice() operator fully replaced with getitem()
+ dictionary operations made 2K/3K compatible
+ base type for encoding substrate and OctetString-based types
is now 'bytes' when running py3k and 'str' otherwise
+ OctetString and derivatives now unicode compliant.
+ OctetString now supports two python-neutral getters: asOcts() & asInts()
+ print OctetString content in hex whenever it is not printable otherwise
+ in test suite, implicit relative import replaced with the absolute one
+ in test suite, string constants replaced with numerics
- Packaged documentation
- Initial version, obsoletes 'python-asn1'

==== python3-pyOpenSSL ====

- add missing requirement for python3-cryptography

==== release-notes-openSUSE ====
Version update (42.3.20170508 -> 42.3.20170621)

- 42.3.20170621
- Updated translations
- Added note about installation of Nvidia's .run packages

==== schily-libs ====
Version update (3.01 -> 3.02~a07)
Subpackages: libscg1_0 libschily1_0

- Fix build on older distros (e.g. SLE11) -- no caps support in RPM
- Remove build dependency on mmv (not present on SLE, and its usage
is easily replaced with a small shell script).
- Fix build on older distros (makedepend)
- Update to new upstream release 3.02~a07
* mkisofs: deduplication for files)
- Update to new upstream release 3.02~a06
* libscg: fixed a copy/paste problem in the Linux transport that
could cause libscg to assume a timeout when no timeout occurred.
* libscg: add a new generic option interface.
* libscg: New option "ignore-resid" to work around a Linux kernel
* mkisofs: better warning messages for rotten directories when in
multi-session mode.
- Update to new upstream release 3.02~a05
* mkisofs now tries to be more immune against rotten iso images
when in multi session mode.
* mkisofs no longer tries to access a string past the null byte
when dealing with Joliet.
* mkisofs fixed a bug related to sorting with multi extent files
(greater than 4 GB).
- Update to new upstream release 3.02~a04
* Support for DVD-Audio was added to mkisofs.
* Several bug fixes in mkisofs and mkisofs/diag/* programs to make
them more robust against rotten ISO images.
- Update to new upstream release 3.02~a03
* isoinfo no longer eats up all memory when an ISO image
with a directory loop is specified.
- Update to new upstream release 3.02~a02
* Many smaller "isoinfo" enhancements including support for
relocated directories.
- Update to new upstream release 3.02~a01
* libparanoia: work around a bug that resulted from uninitalized
statistics data for C2 checks.
* cdda2wav now supports sound output on Linux again.

==== speex ====
Version update (1.2~rc2 -> 1.2)
Subpackages: libspeex1 libspeex1-32bit speex-devel

- Update to stable 1.2 release

==== terminus-bitmap-fonts ====
Version update (4.39 -> 4.46)

- Update to version 4.46
* The X11 8-bit code pages are not installed by default.
* Added IBM-437 8-bit code page for X11.
* The CRT VGA weight for Linux console is not installed by default.
* Removed the Linux console mapping files.
* These should be provided by the console packages.
* Removed the BSD console installation.
* The recent BSD-s have a new console subsystem.
* Added 50 new characters. Mostly math, but also Buglarian yat and yus.
* Rewritten the font conversion tools in python/javascript.
* The full unicode range (17x64K) is now supported.
* The Windows installer can be built from sources.
* Small fixes and improvements (7 characters in various sizes).
* Renamed install-ref to install-psf-ref (uninstall too).
- Update to version 4.40
* Added 6 combining accents as separate characters.
* Added 14 letters with dot above / dot below.
* Added partial subscript and superscript: all digits and 11
* Added 30+ math characters, notably large braces, brackets and
* Added unicode range 2800-28FF in two variants (br1 and br2).
* A few small character fixes.
* Altered configure to be a bit more POSIX compliant.
* Replaced some obscure (un)install Makefile targets with
- Set direct source URL

==== umbrello ====

- Fix the desktop file's Exec line, the executable is named
umbrello5 (boo#1045654)

==== xfce4-vala ====

- Fix build on Leap 42.3: based on SLE12SP3 with GNOME 3.20 it
comes with vala 0.32.x.

==== xfsprogs ====

- xfs_repair: don't call xfs_sb_quota_from_disk twice (bsc#1034045).
* Add xfs_repair-don-t-call-xfs_sb_quota_from_disk-twice.patch
- Moved dracut files to accommodate JeOS (bsc#1037376).
* Renamed ->

To unsubscribe, e-mail: opensuse-factory+unsubscribe@xxxxxxxxxxxx
To contact the owner, e-mail: opensuse-factory+owner@xxxxxxxxxxxx

< Previous Next >
Follow Ups