Mailinglist Archive: opensuse-factory (439 mails)

< Previous Next >
Re: [opensuse-factory] Screen resolution problem
Problem was the nouveau modules were not being loaded.
I had problems with dracut not configuring the network so I went back to module-init-tools.
"hwinfo --gfxcard" said nouveau was inactive.
Went into runlevel 3, "modprobe nouveau", "init 5" to get it sane again.
# hwinfo --gfxcard
32: PCI 100.0: 0300 VGA compatible controller (VGA)
[Created at pci.319]
Unique ID: VCu0.HkVitPDVq34
Parent ID: _Znp.yY1fJIC_xs9
SysFS ID: /devices/pci0000:00/0000:00:02.0/0000:01:00.0
SysFS BusID: 0000:01:00.0
Hardware Class: graphics card
Model: "nVidia GF114 [GeForce GTX 560 Ti]"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x1200 "GF114 [GeForce GTX 560 Ti]"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x838b
Revision: 0xa1
Driver: "nouveau"
Driver Modules: "drm"
Memory Range: 0xf8000000-0xf9ffffff (rw,non-prefetchable)
Memory Range: 0xd0000000-0xd7ffffff (ro,non-prefetchable)
Memory Range: 0xdc000000-0xdfffffff (ro,non-prefetchable)
I/O Ports: 0xcf00-0xcf7f (rw)
Memory Range: 0xd8000000-0xd807ffff (ro,non-prefetchable,disabled)
IRQ: 43 (12812 events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: "pci:v000010DEd00001200sv00001043sd0000838Bbc03sc00i00"
Driver Info #0:
Driver Status: nouveau is active
Driver Activation Cmd: "modprobe nouveau"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #8 (PCI bridge)

Primary display adapter: #32
Regards
Sid.

On 11/03/14 03:04, Felix Miata wrote:
On 2014-03-11 02:56 (GMT) Sid Boyce composed:

After latest zypper dup screen size had defaulted to 1024x768 and cannot
be changed to anything higher.
On other boxes that have not been rebooted I have 1920x1080.
# xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1024 x 768
default connected primary 1024x768+0+0 0mm x 0mm
1024x768 0.0*
800x600 0.0
640x480 0.0
slipstream:/home/lancelot # xrandr --fb 1920x1080
xrandr: Failed to get size of gamma for output default
xrandr: screen cannot be larger than 1024x768 (desired size 1920x1080)

What gfxchip?
What DE?
What driver is reported used in Xorg.0.log?
Which kernel?


--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Senior Staff Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks

--
To unsubscribe, e-mail: opensuse-factory+unsubscribe@xxxxxxxxxxxx
To contact the owner, e-mail: opensuse-factory+owner@xxxxxxxxxxxx

< Previous Next >
References