April 2013 - openSUSE Factory - openSUSE Mailing Lists

Re: [opensuse-factory] repository priorities with Tumbleweed
by Thomas Langkamp 16 Jul '15

16 Jul '15

> No, please don't confuse people, if you add more repos than just > Tumbleweed you really had better know what you are doing or bad things > can, and will, happen :) I understand. I just would like to add the following to http://en.opensuse.org/Portal:Tumbleweed - between ## is the new stuff: "The only supported method of repo use for Tumbleweed is to have only the main repos (Oss, Non-oss, and Update) and the Tumbleweed repo active. ## If you use more repositorys you have to know how repo-priorities work, but even then Tumblweed does NOT support this ## " It would also be good to move this information to "Special concerns" and to move the whole "Special concerns"-section up. For example "Special Concerns Virtual Machines ... Third Party Drivers ... ## Non-Standard Repos: Only use Oss, Non-oss, and Update combined with the Tumbleweed-Standard repo. Everything else is not supported and might break the system ## " >You do know the legal reasons behind why packman is there, right? Yes. Then I do not whish you personaly to support Packman with TW - I understand now that this is not possible from your perspectivg. But...as the OS community discusses right now if/how to strengthen Tumbleweed... one way would be, that Packman+TW would be supported BY Packman. So I will ask the Packman-guys to do that... I hope this is possible for them. Without Packman Tumbleweed is so ... "anti-multimedia" ;) thanks anyway :D -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

11 18

[opensuse-factory] Export broken for KinfoCenter
by Roger Luedecke 30 Jan '15

30 Jan '15

Export button is greyed out no matter what. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] YaST2 "install/remove" doesn't display solver diagram
by Kyrill Detinov 13 Jan '14

13 Jan '14

Hello. There is a regression in YaST2 *Qt* "install/remove software" module. It doesn't show solver diagram. First, no dependencies on libqdialogsolver. Second, installed libqdialogsolver doesn't help. Reported ages ago. And confirmed. All the info is provided. https://bugzilla.novell.com/show_bug.cgi?id=785431 WBR Kyrill

3 3

Re: [opensuse-factory] Nothing provides /usr/bin/php5
by Sascha Peilicke 11 Jan '14

11 Jan '14

On 12/01/2011 11:44 AM, Kyrill Detinov wrote: > > Hello. > > We have one package affected in standard repo: leechcraft-eiskaltdcpp. > The program itself doesn't require php5. But the package includes > example scripts with shebang '!/usr/bin/php5'. So the package isn't > installable. > > Also I see the same problem with pgfouine from Contrib (written in > PHP) and eiskaltdcpp from filesharing repo. Maybe more in third-party > repositories. > > Can we have symlink /usr/bin/php -> php5 in php5 package? Or affected > packages should be fixed? > Please file a bug against php5 and assign to Cristian Rodríguez. -- Viele Grüße, Sascha -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

Re: [opensuse-factory] SOLVED: postfix does not run
by Christian Boltz 06 Nov '13

06 Nov '13

Hello, Am Freitag, 22. März 2013 schrieb Patrick Shanahan: > /etc/postfix/main.cf had @_some-parameter_@ setting for every > "xxxxxxx_directory =" line. > > After correcting "xxxxxxxx_directory =" settings per my Tumbleweed > machine, postfix appears working correctly. > > This mess probably occurred on installing/upgrading postfix: > postfix-2.9.6-2.1.x86_64 Sun Mar 10 11:14:39 2013 > but the rpm main.cf does not contain "@.............@". This sounds like https://bugzilla.novell.com/show_bug.cgi?id=796162 which should be fixed since some time. I'd guess some older postfix package broke your main.cf. Nevertheless, if you want to be really sure, uninstall postfix, move away /etc/postfix and re-install the postfix package. Regards, Christian Boltz -- Argh, ich wollte heute doch gar nicht mehr siggen! [Michael Hoffmann in dag°] -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Warning: new systemd version landing in Factory
by Frederic Crozat 20 Sep '13

20 Sep '13

Hi all, systemd v202 should be landed in Factory soon. It contains a lot of changes (and bug fixes) compared to v195 we had in 12.3, like (this is an extract from the .changes I wrote): + udev now supports different naming policies for network interface for predictable names (this one is disabled by /usr/lib/tmpfiles.d/network.conf until network team had a chance to look at it and test it). This should be enabled by default in Factory soon (see http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfac… ) This can be also be turned off with kernel command line switch: net.ifnames=0 (when the tmpfiles.d is removed in the near future) + udev gained support for loading additional device properties from an indexed database. %udev_hwdb_update macro should be used by packages adding entries to this database. + Journal gained support for "Message Catalog", indexed database to link up additional information with journal entries. %journal_catalog_update macro should be used by packages adding %entries to this database. + New rpm macros has been added: %udev_rules_update(), %_udevhwdbdir, %_udevrulesdir, %_journalcatalogdir, %_tmpfilesdir, %_sysctldir. + "age" field for tmpfiles entries can be set to 0, forcing removal of files matching this entry. + coredumpctl gained "gdb" verb to invoke gdb on selected coredump. + In service files, %U can be used for configured user name of the service. + nspawn can be invoked without a controlling TTY. + systemd and nspawn can accept socket file descriptors when started for socket activation. This allow socket activated nspawn containers. + logind can now automatically suspend/hibernate/shutdown system on idle. + ConditionACPower can be used in unit file to detect if AC power source is connected or if system is on battery power. + EnvironmentFile= in unit files supports file globbing. + Behaviour of PrivateTmp=, ReadWriteDirectories=, ReadOnlyDirectories= and InaccessibleDirectories= has changed. The private /tmp and /var/tmp directories are now shared by all processes of a service (which means ExecStartPre= may now leave data in /tmp that ExecStart= of the same service can still access). When a service is stopped its temporary directories are immediately deleted (normal clean-up with tmpfiles is still done in addition to this though). + Resource limits (as exposed by cgroup controlers) can be controlled dynamically at runtime for all units, using "systemctl set-cgroup-attr foobar.server cgroup.attribute value". Those settings are stored persistenly on disk. + systemd-vconsole-setup will now copy all fonts settings to all allocated VTs. + timedated now exposes CanNTP property to indicate if a local NTP service is available. + pstore file system is mounted by default, if available. + SMACK policies are loaded at early boot, if available. + Timer units now support calendar time events. + systemd-detect-virt detect xen PVs. + Some distributions specific LSB targets has been dropped: $x-display-manager, $mail-transfer-agent, $mail-transport-agent, $mail-transfer-agent, $smtp, $null. As well mail-transfer-agent.target and syslog.target has been removed. + systemd-journal-gatewayd gained SSL support and now runs as unprivileged user/group "systemd-journal-gateway:systemd-journal-gateway" + systemd-analyze will read, when available, boot time performance from EFI variable from boot loader supporting it. + A new generator for automatically mounting EFI System Partition (ESP) to /boot (if empty and no other file system has been configured in fstab for it). + logind will now send out PrepareForSleep(false) out unconditionally, after coming back from suspend. + tmpfiles gained a new "X" line type, that allows configuration of files and directories (with wildcards) that shall be excluded from automatic cleanup ("aging"). + udev default rules set the device node permissions now only at "add" events, and do not change them any longer with a later "change" event. + A new bootctl tool has been added that is an interface for certain EFI boot loader operations. + A new tool kernel-install has been added to install kernel images according to Boot Loader Specification. + A new tool systemd-activate can be used to test socket activation. + A new group "systemd-journal" is now owning journal files, replacing "adm" group. + journalctl gained "--reverse" to show output in reverse order, "--pager-end" to jump at the end of the journal in the pager (only less is supported) and "--user-unit" to filter for user units. + New unit files has been addedto ease for systemd usage in initrd. + "systemctl start" now supports "--irreversible" to queue operations which can be reserved. It is now used to make shutdown requests more robust. + Auke Kok's bootchart has been merged and relicensed to LGPLv2.1+. + nss-myhostname has been merged in systemd codebase. + some defaults sysctl values are now set by default: the safe sysrq options are turned on, IP route verification is turned on, and source routing disabled. The recently added hardlink and softlink protection of the kernel is turned on. + journald will now explicitly flush journal files to disk at the latest 5 min after each write and will mark file offline until next read. This should increase reliability in case of crash. + remote-fs-setup.target target has been added to pull in specific services when at least one remote file system is to be mounted. + timers.target and paths.target have been added as canonical targets to pull user timer and path units, similar to sockets.targets. + udev daemon now sets default number of worker processes in parallel based on number of CPUs instead of RAM. + Most unit file settings which takes likst of items can now be reset by assigning empty string to them, using drop-in. + Add support for drop-in configuration file for units. + Most unit file settings which takes likst of items can now be reset by assigning empty string to them, using drop-in. + 'hostnamectl set-hostname' allows setting FQDN hostnames. + fractional time intervals are now parsed properly. + localectl can list available X11 keymaps. + systemd-analyze dot can filter for specific units and has been rewritten in C. + systemctl gained "list-dependencies" command. + Inhibitors are now honored no only in GNOME. + 'systemctl list-jobs' got some polishing. '--type=' argument may now be passed more than once. 'systemctl list-sockets' has been added. + systemd gained a new unit 'systemd-static-nodes.service' that generates static device nodes earlier during boot, and can run in conjunction with udev. + systemd-nspawn now places all containers in the new /machine top-level cgroup directory in the name=systemd hierarchy. + bootchart can now store its data in the journal. + journactl can now take multiple --unit= and --user-unit= switches. + The cryptsetup logic now understands the "luks.key=" kernel command line switch. If a configured key file is missing, it will fallback to prompting the user. -- Frederic Crozat <fcrozat(a)suse.com> SUSE -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

10 31

[opensuse-factory] Tumbleweed update today breaks vlc from packman
by Patrick Shanahan 30 Jul '13

30 Jul '13

09:58 Crash: ~ > vlc VLC media player 2.0.6 Twoflower (revision 2.0.6-0-gbe9623c) Segmentation fault 09:58 Crash: ~ > rpm -q --last vlc vlc-2.0.6-116.4.x86_64 Thu 25 Apr 2013 09:50:02 AM EDT ?? tks, -- (paka)Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 http://en.opensuse.org openSUSE Community Member Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

8 30

Re: [opensuse-factory] 12.3 RC1 R128 trouble (was: ...install mysteries)
by Felix Miata 12 Jul '13

12 Jul '13

On 2013-02-18 16:40 (GMT+0100) Roger Oberholtzer composed: > I am installing 12.3 RC1 on a machine that happily runs earlier versions > of openSUSE. The graphics is, admittedly, an older ATI Rage XL (MACH64). > It runs as a server, and this is on the MB. It is usually only seen > during install. > The install was a bit of a PITA because, no matter what display I used, > I could not get a graphic install to work. I tried setting various > resolutions and even 'No KMS' in the initial install screen. The screen > would go black, and I could do nothing. No virtual terminals. Nothing. > Eventually I had settle for the text install. Using 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Rage Mobility M3 AGP 2x (rev 02) here. 11.4 works OK. I installed HTTP started by Grub using latest factory-snapshot with nomodeset on cmdline. Graphical install worked fine, though slow with only 384M RAM, but resulting X is unusable. The left half of the screen is fine, but the right side is a mess, as if there were some kind of buffer misalignment repeating portions and omitting others. Using nomodeset produces mostly black screens with colored lines in various places at various times in attempting to start the login manager, and kills keyboard. Bunch of Xorg.0.log files: http://fm.no-ip.com/Tmp/Linux/Xorg/os123r128/ Anyone looked for a match to any of these upstream R128 bugs? http://tinyurl.com/bz5lfmv I've commented in the last bug in that list. Exiting X makes the system unresponsive to keyboard and mostly empties the screen to black. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] Tumbleweed: Emacs/AucTeX+GTK - LaTeX process does not finish
by Peter Hanisch 15 May '13

15 May '13

Hej! I have a problem with Emacs/AucTeX, which is *somehow* connected to the big Gnome update that landed in Tumbleweed within the last couple of days. I have not yet reported this as a bug since I quite frankly do not know what to report. I get *no* error messages via Emacs's Messages buffer or via console output etc. Normally, when compiling a LaTeX-document with Emacs & AucTeX, the output is sent to another buffer, emacs runs pdflatex and once pdflatex finishes, Emacs prints "Successfully wrote [x] pages" in the minibuffer. Afterwards, one can call another command, be it another LaTeX-run, Biber/Bibtex/Biblatex etc. etc. *However*, Emacs does *not* produce the "Successfully..." message, and subsequently, the latex process never finishes, unless killed by hand. This *only* happens in Emacs+GTK(3), emacs-x11 works as intended. This means *something* GTK-related breaks Emacs/AucTeX, however, I have no idea where I should even start to look since I get no output/errors etc. Does anybody have any ideas what could be causing this? Peter -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 7

[opensuse-factory] Re: What is the purpose of the systemd journal service?
by Linda Walsh 14 May '13

14 May '13

Cristian Rodríguez wrote: > El 15/09/12 11:49, Per Jessen escribió: > >> I do want to log, but I've looked at the journal already and didn't see >> anything that wasn't already in /var/log/messages, /var/log/mail etc. >> Seems like a duplication of effort and a waste of space in >> /var/log/journal. (which afaict can just be deleted). > > It is significantly more powerful than traditional logging: > > For example > > journalctl /usr/bin/foo --> get messages from program foo > > journalctl /dev/sda --> hard-drive problems ? > > journalctl -p error --> only errors > --- I assume the full power of linux's text utilities can be used on them - like grep, sort, awk, perl... vim... Having logs recorded in a non-text binary format tends to make MS logs out-a-sight, out-a-mind, where as I often go and poke around in /var/log and look to see if I notice anything 'new'. If I can't look at the whole stream as a text (messages, warnings, etc), I don't get a field for what is right or wrong behavior and certainly wouldn't be able to pick out an anomaly if I had to query each item separately -- that global view is a good way to look for 'warts'... MS makes it much to painful to do hat -- 1 error / page, everything in 300 separate queries ... ug! > Currently it is not a full replacement for syslog but I suggest you to > check it out. > I tend to use ngsyslog for the filtering benefits. -- really has some powerful filtering in the 2.x line -- had to label ng3x taboo, so it won't overwrite a working config with a non working config... -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

27 129