Hi, On Mon, 10 Aug 2009, Patrick Shanahan wrote:
* Eberhard Moenkeberg
[08-10-09 05:41]:
(--) NV: Found NVIDIA GeForce 7300 GS at 05@00:00:0 ... (II) NV(0): Probing for analog device on output A... (--) NV(0): ...found one (II) NV(0): Probing for analog device on output B... (--) NV(0): ...found one (II) NV(0): Probing for EDID on I2C bus A... (II) NV(0): I2C device "DDC:E-EDID segment register" registered at address 0x60. (II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0. (--) NV(0): DDC detected a DFP: (II) NV(0): Manufacturer: SAM Model: 467 Serial#: 1129132596 (II) NV(0): Year: 2009 Week: 1 (II) NV(0): EDID Version: 1.3 (II) NV(0): Digital Display Input (II) NV(0): Max Image Size [cm]: horiz.: 52 vert.: 32 (II) NV(0): Gamma: 2.20 (II) NV(0): DPMS capabilities: Off (II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) NV(0): First detailed timing is preferred mode (II) NV(0): redX: 0.650 redY: 0.337 greenX: 0.296 greenY: 0.604 (II) NV(0): blueX: 0.147 blueY: 0.074 whiteX: 0.312 whiteY: 0.329 ... (II) NV(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 (II) NV(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0 (II) NV(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 170 MHz (II) NV(0): Monitor name: SyncMaster
With these infos, you can build an appropriate mode line:
Section "Modes" Identifier "Modes[0]" Modeline "1920x1200" 154 1920 1968 2000 2080 1200 1203 1209 1235 EndSection
which is indeed already in the log:
(II) NV(0): Printing DDC gathered Modelines: (II) NV(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz)
and a monitor section:
Section "Monitor" DisplaySize 520 320 HorizSync 30-81 Identifier "Monitor[0]" ModelName "SyncMaster" VertRefresh 56-75 UseModes "Modes[0]" EndSection
ok, mod xorg.conf as:
diff ./xorg.conf.new ./xorg.conf.new.1 68,70c68,70 < Driver "nv" < VendorName "Unknown Vendor" < BoardName "Unknown Board" ---
Driver "nvidia" VendorName "nVidia" BoardName "7300GS"
101a102,115
EndSection
Section "Modes" Identifier "Modes[0]" Modeline "1920x1200" 154 1920 1968 2000 2080 1200 1203 1209 1235 EndSection
Section "Monitor" DisplaySize 520 320 HorizSync 30-81 Identifier "Monitor[0]" ModelName "SyncMaster" VertRefresh 56-75 UseModes "Modes[0]"
Same result, but now get EE vnc module version mis-match to libvnc... I guess this means that xorg.X11 is later version? http://wahoo.no-ip.org/~pat/Xorg.0.log.1
For this test, vnc is not important. Commented out the load order and retried.
Now get no error, *but* still no screen, blank with backlight hints. http://wahoo.no-ip.org/~pat/Xorg.0.log.2 Changed driver from "nvidia" back to "nv"
Now: (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) Still *no* screen!
Past experience shows that this error results from the proprietary nVidia driver removing several files:
missing /usr/lib64/dri/gallium/libGL.so.1 missing /usr/lib64/dri/gallium/libGL.so.1.2 missing /usr/lib64/libGL.so.1.2 missing /usr/lib/libGL.so.1.2
from: Mesa Mesa-32bit xorg-x11-driver-video-nouveau-3d
after replacing the missing files:
I was wrong, still blank/black screen.
reinstalling the proprietary nvidia driver.
The modeline entry does not get used. The driver is telling something about using "nvidia auto detect" mode, and probably that is driving your display into sleep mode. Viele Gruesse Eberhard Moenkeberg (emoenke@gwdg.de, em@kki.org) -- Eberhard Moenkeberg Arbeitsgruppe IT-Infrastruktur E-Mail: emoenke@gwdg.de Tel.: +49 (0)551 201-1551 ------------------------------------------------------------------------- Gesellschaft fuer wissenschaftliche Datenverarbeitung mbH Goettingen (GWDG) Am Fassberg 11, 37077 Goettingen URL: http://www.gwdg.de E-Mail: gwdg@gwdg.de Tel.: +49 (0)551 201-1510 Fax: +49 (0)551 201-2150 Geschaeftsfuehrer: Prof. Dr. Bernhard Neumair Aufsichtsratsvorsitzender: Dipl.-Kfm. Markus Hoppe Sitz der Gesellschaft: Goettingen Registergericht: Goettingen Handelsregister-Nr. B 598 ------------------------------------------------------------------------- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org