Veamos esto fue lo que me arrojo ifconfig. Creo que hice lo que me dices ltspserver:/etc # ifconfig -a eth0 Link encap:Ethernet HWaddr 00:C0:F0:32:13:7F inet addr:10.0.1.17 Bcast:10.0.1.255 Mask:255.255.255.0 inet6 addr: fe80::2c0:f0ff:fe32:137f/64 Scope:Link UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1 RX packets:20059 errors:1 dropped:0 overruns:0 frame:0 TX packets:8711 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1877389 (1.7 Mb) TX bytes:2863876 (2.7 Mb) Interrupt:11 Base address:0x2000 eth1 Link encap:Ethernet HWaddr 00:08:C7:4C:57:E2 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:5 Base address:0x3800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:10139 errors:0 dropped:0 overruns:0 frame:0 TX packets:10139 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:409756 (400.1 Kb) TX bytes:409756 (400.1 Kb) sit0 Link encap:IPv6-in-IPv4 NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Sep 14 13:29:02 ltspserver dhcpd: Internet Software Consortium DHCP Server V3.0.1rc13 Sep 14 13:29:02 ltspserver dhcpd: Copyright 1995-2003 Internet Software Consortium. Sep 14 13:29:02 ltspserver dhcpd: All rights reserved. Sep 14 13:29:02 ltspserver dhcpd: For info, please visit http://www.isc.org/products/DHCP Sep 14 13:29:02 ltspserver dhcpd: Internet Software Consortium DHCP Server V3.0.1rc13 Sep 14 13:29:02 ltspserver dhcpd: Copyright 1995-2003 Internet Software Consortium. Sep 14 13:29:02 ltspserver dhcpd: All rights reserved. Sep 14 13:29:02 ltspserver dhcpd: For info, please visit http://www.isc.org/products/DHCP Sep 14 13:29:02 ltspserver dhcpd: Wrote 0 leases to leases file. Sep 14 13:29:03 ltspserver dhcpd: Sep 14 13:29:03 ltspserver dhcpd: No subnet declaration for eth-id-00:c0:f0 (0.0.0.0). Sep 14 13:29:03 ltspserver dhcpd: ** Ignoring requests on eth-id-00:c0:f0. If this is not what Sep 14 13:29:03 ltspserver dhcpd: you want, please write a subnet declaration Sep 14 13:29:03 ltspserver dhcpd: in your dhcpd.conf file for the network segment Sep 14 13:29:03 ltspserver dhcpd: to which interface eth-id-00:c0:f0 is attached. ** Sep 14 13:29:03 ltspserver dhcpd: Sep 14 13:29:03 ltspserver dhcpd: Sep 14 13:29:03 ltspserver dhcpd: Not configured to listen on any interfaces! Sep 14 13:29:03 ltspserver dhcpd: Sep 14 13:29:03 ltspserver dhcpd: If you did not get this software from ftp.isc.org, please Sep 14 13:29:03 ltspserver dhcpd: get the latest from ftp.isc.org and install that before Sep 14 13:29:03 ltspserver dhcpd: requesting help. Sep 14 13:29:03 ltspserver dhcpd: Sep 14 13:29:03 ltspserver dhcpd: If you did get this software from ftp.isc.org and have not Sep 14 13:29:03 ltspserver dhcpd: yet read the README, please read it before requesting help. Sep 14 13:29:03 ltspserver dhcpd: If you intend to request help from the dhcp-server@isc.org Sep 14 13:29:03 ltspserver dhcpd: mailing list, please read the section on the README about Sep 14 13:29:03 ltspserver dhcpd: submitting bug reports and requests for help. Sep 14 13:29:03 ltspserver dhcpd: Sep 14 13:29:03 ltspserver dhcpd: Please do not under any circumstances send requests for Sep 14 13:29:03 ltspserver dhcpd: help directly to the authors of this software - please Sep 14 13:29:03 ltspserver dhcpd: send them to the appropriate mailing list as described in Sep 14 13:29:03 ltspserver dhcpd: the README file. Sep 14 13:29:03 ltspserver dhcpd: Sep 14 13:29:03 ltspserver dhcpd: exiting. *-------------------------------------------------------* *-Edwin Quijada *-Developer DataBase *-JQ Microsistemas *-809-747-2787 * " Si deseas lograr cosas excepcionales debes de hacer cosas fuera de lo comun" *-------------------------------------------------------*
From: "Hector Reyes Armenta" <hreyes_5000@hotmail.com> To: listas_quijada@hotmail.com, suse-linux-s@suse.com Subject: RE: [suse-linux-s] Problema con DHCPD Date: Wed, 14 Sep 2005 14:43:12 -0500
hola creo que el problema es que no le haz puesto a tu eth0 la IP que le pusiste al servidor DHCP para que "escuche" las peticiones del servicio, se decir, ponle al dhcp la IP de la maquina o cambiala por la que tiene en archivo de configuracion.
TSU en Telemática Héctor Reyes Armenta Puebla, Mexico
_________________________________________________________________ Visita MSN Latino Entretenimiento: ¡música, cine, chismes, TV y más...! http://latino.msn.com/entretenimiento/