Carlos, primero que nada disculpas por el mail que te envié directamente a ti (ademas de todo fue sin la info), pero sufrí un acceso de doble click :s Segundo muchas gracias por el tiempo que me estas dedicando a ayudarme, de verdad lo aprecio. Tercero, despues de un par de horas logré lo que me pediste y te lo paso a continuación: fstab /dev/hda2 / reiserfs defaults 1 1 /dev/hda1 /windows/C ntfs ro,users,gid=users,umask=0002,nls=iso8859-1 0 0 /dev/hda5 /windows/D ntfs ro,users,gid=users,umask=0002,nls=iso8859-1 0 0 /dev/hda6 /windows/E ntfs ro,users,gid=users,umask=0002,nls=iso8859-1 0 0 /dev/hda3 swap swap pri=42 0 0 devpts /dev/pts devpts mode=0620,gid=5 0 0 proc /proc proc defaults 0 0 usbdevfs /proc/bus/usb usbdevfs noauto 0 0 /dev/cdrecorder /media/cdrecorder auto ro,noauto,user,exec 0 0 /dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0 ======= lo modifiqué como sugeriste y dejé solo la primer lina, no afecto en nada, lo que si me llama la atencion es que aunque lo monta ro le agrego la linea de "proc /proc ..... " dmesg Linux version 2.4.20-4GB (root@Pentium.suse.de) (gcc version 3.3 20030226 (prerelease) (SuSE Linux)) #1 Tue Aug 10 10:44:07 UTC 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved) BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS) BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001dff0000 (usable) BIOS-e820: 000000001dff0000 - 000000001e000000 (ACPI data) BIOS-e820: 000000001e000000 - 0000000020000000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) Scanning bios EBDA for MXT signature 0MB HIGHMEM available. 479MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 122864 zone(0): 4096 pages. zone(1): 118768 pages. zone(2): 0 pages. ACPI: RSDP (v000 TOSHIB ) @ 0x000f00a0 ACPI: RSDT (v001 TOSHIB 750 00151.02068) @ 0x1dff0000 ACPI: FADT (v002 TOSHIB 750 00151.02068) @ 0x1dff0058 ACPI: DBGP (v001 TOSHIB 750 00151.02068) @ 0x1dff00dc ACPI: BOOT (v001 TOSHIB 750 00151.02068) @ 0x1dff0030 ACPI: DSDT (v001 TOSHIB A20 08195.01041) @ 0x00000000 ACPI: BIOS passes blacklist Building zonelist for node : 0 Kernel command line: auto BOOT_IMAGE=Lx_SuSE root=302 hdc=ide-scsi hdclun=0 splash=silent showopts splash=0 init S ide_setup: hdc=ide-scsi ide_setup: hdclun=0 bootsplash: silent mode. Initializing CPU#0 Detected 3055.291 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 6094.84 BogoMIPS Memory: 481932k/491456k available (1573k kernel code, 9136k reserved, 574k data, 160k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebf9ff 00000000 00000000 00000000 CPU: Common caps: bfebf9ff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20030228 PCI: PCI BIOS revision 2.10 entry at 0xf9798, last bus=4 PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S3 S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11, disabled) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11, disabled) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11) ACPI: PCI Interrupt Link [LNKI] (IRQs 3 4 5 6 7 10 *11) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: Power Resource [PFAN] (off) PCI: Probing PCI hardware ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 5 PCI: No IRQ known for interrupt pin A of device 00:04.0 - using IRQ 255 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS not found. mxt_scan_bios: enter Starting kswapd bigpage subsystem: allocated 0 bigpages (=0MB). kinoded started VFS: Disk quotas vdquot_6.5.1 aio_setup: num_physpages = 30716 aio_setup: sizeof(struct page) = 48 vesafb: framebuffer at 0xfc000000, mapped to 0xde813000, size 32768k vesafb: mode is 1024x768x16, linelength=2048, pages=20 vesafb: protected mode interface info at c000:7e62 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for splash picture.... silenjpeg size 30311 bytes, found (1024x768, 23130 bytes, v3). Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled PCI: Enabling device 00:09.0 (0000 -> 0003) Redundant entry in serial pci_table. Please send the output of lspci -vv, this message (10b9,5457,1179,0001) and the manufacturer and name of serial board or modem board to serial-pci-info@lists.sourceforge.net. register_serial(): autoconfig failed Real Time Clock Driver v1.10e floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize loop: loaded (max 16 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ALI15X3: IDE controller at PCI slot 00:04.0 PCI: No IRQ known for interrupt pin A of device 00:04.0 - using IRQ 255 ALI15X3: chipset revision 196 ALI15X3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xeff0-0xeff7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xeff8-0xefff, BIOS settings: hdc:DMA, hdd:pio hda: IC25N080ATMR04-0, ATA DISK drive blk: queue c03ac500, I/O limit 4095Mb (mask 0xffffffff) hdc: TOSHIBA DVD-ROM SD-R2412, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 156301488 sectors (80026 MB) w/7884KiB Cache, CHS=9729/255/63, UDMA(33) ide-floppy driver 0.99.newide Partition check: hda: hda1 hda2 hda3 hda4 < hda5 hda6 > ide-floppy driver 0.99.newide SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 477k freed VFS: Mounted root (ext2 filesystem). reiserfs: found format "3.6" with standard journal reiserfs: enabling write barrier flush mode reiserfs: using ordered data mode reiserfs: checking transaction log (ide0(3,2)) for (ide0(3,2)) Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 160k freed md: recovery thread got woken up ... md: recovery thread finished ... mtab /dev/hda2 / reiserfs rw 0 0 si se te ocurre algo mas encantado de leerte :D gracias nuevamente, William