Hallo zusammen,
ich an meinem Laptop 2 zusätzliche Monitore via DualHead2Go angeschlossen und
würde nun gerne jeden Monitor einzeln ansprechen können.
D.h.
Wenn ich an dem Laptop Bildschirm ein Anwendung in Vollbild Modus betreiben
will, soll diese auch nur auf dem Laptop Bildschirm sein.
Wenn ich einen Anwendung auf Montitor 1 auf Vollbildmodus schalte soll diese
Anwendung auch nur auf Monitor 1 zu sehen sein und nicht im Vollbildmodus über
Monitor 1 und Monitor 2.
Folgende Daten:
Opensuse 11.1
Linux spirit21-laptop 2.6.27.29-0.1-default #1 SMP 2009-08-15 17:53:59 +0200
i686 i686 i386 GNU/Linux
Grafikkarte:
Hersteller: NVIDIA Corporation
Modell: Quadro NVS 140M/PCI/SSE2
Treiber: 3.0.0 NVIDIA 185.18.36
Monitore:
Samsung 226BW
Samsung 223BW
Matrox DualHead2Go
Meine derzeitige xorg.conf:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder63) Wed May 27 03:16:54
PDT 2009
# /.../
# SaX generated X11 config file
# Created on: 2009-02-22T09:11:40+0100.
#
# Version: 8.1
# Contact: Marcus Schaefer , 2005
# Contact: SaX-User list https://lists.berlios.de/mailman/listinfo/sax-users
#
# Automatically generated by [ISaX] (8.1)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "ServerLayout"
Identifier "Layout[all]"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
EndSection
Section "Files"
InputDevices "/dev/gpmdata"
InputDevices "/dev/input/mice"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/URW"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/latin2/misc:unscaled"
FontPath "/usr/share/fonts/latin2/75dpi:unscaled"
FontPath "/usr/share/fonts/latin2/100dpi:unscaled"
FontPath "/usr/share/fonts/latin2/Type1"
FontPath "/usr/share/fonts/latin7/75dpi:unscaled"
FontPath "/usr/share/fonts/baekmuk:unscaled"
FontPath "/usr/share/fonts/japanese:unscaled"
FontPath "/usr/share/fonts/kwintv"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/uni:unscaled"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/ucs/misc:unscaled"
FontPath "/usr/share/fonts/ucs/75dpi:unscaled"
FontPath "/usr/share/fonts/ucs/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/misc:unscaled"
FontPath "/usr/share/fonts/hellas/75dpi:unscaled"
FontPath "/usr/share/fonts/hellas/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/Type1"
FontPath "/usr/share/fonts/misc/sgi:unscaled"
FontPath "/usr/share/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
EndSection
Section "Module"
Load "freetype"
Load "glx"
Load "dbe"
Load "extmod"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
Option "Xinerama" "0"
Option "ZapWarning" "on"
EndSection
Section "InputDevice"
Identifier "Keyboard[0]"
Driver "kbd"
Option "Protocol" "Standard"
Option "XkbLayout" "de"
Option "XkbModel" "thinkpad60"
Option "XkbRules" "xfree86"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Mouse[1]"
Driver "mouse"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "EmulateWheel" "on"
Option "EmulateWheelButton" "2"
Option "InputFashion" "Mouse"
Option "Name" "IBM;TPPS/2 TrackPoint"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
Section "Modes"
Identifier "Modes[0]"
EndSection
Section "Monitor"
Identifier "Monitor[0]"
VendorName "--> LCD"
ModelName "1680X1050@60HZ"
UseModes "Modes[0]"
DisplaySize 340 270
HorizSync 30.0 - 66.0
VertRefresh 50.0 - 61.0
Option "CalcAlgorithm" "XServerPool"
Option "DPMS"
Option "PreferredMode" "1680x1050"
EndSection
Section "Monitor"
#HorizSync 31.5 - 80.0
#VertRefresh 60.0 - 75.0
#HorizSync 31.5 - 80.0
#VertRefresh 60.0 - 85.0
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Matrox"
HorizSync 31.5 - 80.0
VertRefresh 60.0 - 85.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device[0]"
Driver "nvidia"
VendorName "NVIDIA"
BoardName "Quadro NVS 140M"
#Option "NvAGP" "1"
Option "NvAGP" "3"
Option "NoLogo" "False"
Option "OnDemandVBlankInterrupts" "True"
Option "RenderAccel" "true"
Option "AllowSHMPixmaps" "0"
Option "PixmapCacheSize" "1000000"
# Anpassungen nach dem Readme 23.08.2009
Option "WindowFlip" "1"
Screen 0
EndSection
#Section "Device"
## Das ist für Susepend2ram notwenig
#+ Identifier "Device0"
# Driver "nvidia"
# VendorName "NVIDIA Corporation"
# BoardName "Quadro NVS 140M"
# Option "NvAGP" "1"
# Option "NoLogo" "False"
#EndSection
Section "Screen"
Identifier "Screen[0]"
Device "Device[0]"
Monitor "Monitor[0]"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 8
Modes "1680x1050"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "DFP-0"
Option "metamodes" "CRT: 3360x1050 +1680+0, DFP: nvidia-auto-
select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Vielen Dank für eure Hilfe hier.
--
Mit freundlichen Grüssen
Siggi
--
Um die Liste abzubestellen, schicken Sie eine Mail an:
opensuse-de+unsubscribe@opensuse.org
Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken
Sie eine Mail an: opensuse-de+help@opensuse.org