Am Freitag, 21. April 2006 12:57 schrieb Thomas Ohms:
Hallo Gerd,
Am Freitag, 21. April 2006 09:58 schrieb Gerd Limbeck:
Hallo,
ich habe es irgendwie hinbekommen ein SUSE 10.0 64-bit zu installieren, bei dem ein "init 3" vom Runlevel 5 aus den X-Server nicht beendet:
Auf "init 3" wird zwar gemeldet: (...) Shutting down service kdm done Shutting down service kdm done (...)
aber ein "/etc/init.d/xdm status" meldet: Checking for service kdm: running
Kleiner Tipp: Unter SuSE kannst Du auch rcxdm start/stop/status verwenden, das spart Zeit beim tippen ;)
Ohh ja. Danke. Geht ja wohl mit allen Diensten...
Auch ein manuelles Stop hat keine Wirkung:
linux:/home/gerd # /etc/init.d/xdm stop Shutting down service kdm done linux:/home/gerd # /etc/init.d/xdm status Checking for service kdm: running
Was habe ich wo falsch gemacht?!
Mach das doch nochmal und sende dann mal die Ausgabe von "dmesg | tail".
linux:/home/limbeck # dmesg | tail 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:00:0e.0: 3Com PCI 3c905B Cyclone 10/100/BNC at 0x1400. Vers LK1.1.19 ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 209 0000:00:06.0: tulip_stop_rxtx() failed 0000:00:06.0: tulip_stop_rxtx() failed eth0: Setting full-duplex based on MII#1 link partner capability of 45e1. eth2: no IPv6 routers present eth0: no IPv6 routers present eth2: Setting full-duplex based on MII #24 link partner capability of 01e1. mtrr: 0xf0000000,0x2000000 overlaps existing 0xf0000000,0x1000000 mehr war nich... Gruß Gerd
Gruß Thomas