* Andreas Schott schrieb:
in /etc/sane.d/brother2.conf port /dev/usb/lp0
/dev/usb/lp0? Ist das nicht ein USB-Druckerport?
versuch doch mal /dev/usb/scanner0 Ja, kar, hätte ich auch drauf kommen können, aber das war's auch nicht. Vorher MUSS das Gerät erstmal erkannt werden, also in /var/log/messages der Scanner als Gerät erkannt werden und dann unter lsusb ein Gerät angegeben sei, wie es derzeit nur der Drucker des MFC 7820 ist.
Also vermutlich scanimage -L ebenfalls ohne Ergebnis? ja:
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).
iii) Modify the /etc/fstab file # vi /etc/fstab change the line: 'none /proc/bus/usb ...' to 'none /proc/bus/usb usbdevfs auto,devmode=0666 0 0'
bei Suse 9.2 unterbringe, (bei der nur 'usbfs /proc/bus/usb usbfs noauto 0 0' zu finden ist), wäre mir schon seeeeehr weitergeholfen,
Das hast du in der Anleitung nicht überlesen, oder?
echo 'none /proc/bus/usb usbfs auto,devmode=0666 0 0' >> /etc/fstab
Note: For SuSE users: change the line in the /etc/fstab file from: 'none /proc/bus/usb ...' to 'none /proc/bus/usb usbdevfs auto,devmode=0666 0 0'
habe ich so gemacht, klar! Ich hatte es allerdings so verstanden, daß ich einen VORHANDENE Zeile 'none /proc/bus/usb ...' auf 'none /proc/bus/usb usbdevfs auto,devmode=0666 0 0' ändern soll. Aber gut: habe mal die 'none /proc/bus/usb usbdevfs auto,devmode=0666 0 0' per cat an die fstab angehängt. Die fstab derzeit (ohne die sdaX-mounts): [...] devpts /dev/pts devpts mode=0620,gid=5 0 0 proc /proc proc defaults 0 0 usbfs /proc/bus/usb usbfs noauto 0 0 sysfs /sys sysfs noauto 0 0 /dev/dvd /media/dvd subfs fs=cdfss,ro,procuid,nosuid,nodev,exec,iocharset=utf8 0 0 # für den MFC 7820 Scanner none /proc/bus/usb usbdevfs auto,devmode=0666 0 0 Dann mal für alle Fälle ein reboot, weil ich nicht weiß wie Suse 9.2 verkraftet, daß auf /proc/bus/usb zweimal gemountet wird. Aber hat nix geholfen, weiterhin einziges erkanntes Gerät bleibt der Drucker im MFC 7820, der Scanner ist unentdeck: rex3:~ # lsusb Bus 005 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 003: ID 04f9:0181 Brother Industries, Ltd Bus 003 Device 002: ID 046d:c00e Logitech, Inc. Optical Mouse Bus 003 Device 001: ID 0000:0000 Bus 002 Device 003: ID 067b:2305 Prolific Technology, Inc. PL2305 Parallel Port Bus 002 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 sonst noch Tipps? Gruss Ekkard