Hallo Kris, On Sunday 06 March 2005 19:12, pfeffer wrote:
Hallo Roland,
was bedeutet Firewall nfs/tcp port 2049? Ich kann lediglich sagen das die Suse Firewall deaktiviert ist. Eine deaktivierte Firewall ist zu nichts nutz. Konfiguriere also Deine Firewall so, dass der port 2049 für das TC-Protocol freigeschaltet ist. habe den DNS-Server nachinstalliert und hoffentlich richtig konfiguriert. Jedoch nach wie vor kann ich bei der Konfiguration des Clients den Stationären Rechner nicht sehen.
Für ein 3-Hosts Netz brauchst Du keinen DNS-Server. Ein caching only tut's da schon. (Du hast mehrere DNS-Howto's auf Deinem System; /usr/share/doc/howto/)
Habe mal die etc/exports und etc/hosts der beiden Rechner angehängt.
etc/exports des Notebooks (Suse 9.1, keine Probleme) /windows/D/ 192.168.69.1/255.255.255.0(rw,no_root_squash,sync) 192.168.69.3/255.255.255.0(rw,no_root_squash,sync)
sieht bei mir so aus: roland@roland:~> cat /etc/exports /media/dvd/ *(async,no_root_squash) roland@roland:~>
etc/hosts des Notebooks (Suse 9.1, keine Probleme)
[snip]
# IP-Address Full-Qualified-Hostname Short-Hostname 127.0.0.1 localhost
# special IPv6 addresses
::1 localhost ipv6-localhost ipv6-loopback
fe00::0 ipv6-localnet
ff00::0 ipv6-mcastprefix ff02::1 ipv6-allnodes ff02::2 ipv6-allrouters ff02::3 ipv6-allhosts 192.168.69.1 l1.local.net l1 192.168.69.3 l3.local.net l3 192.168.69.2 l2.local.net l2
etc/export des statonären Rechners l3 (Suse 9.2, Problem kann den Rechner l1 und l2 bei der Konfiguration des nfs-Clients nicht sehen)
/windows/D/ 192.168.69.2(rw,no_root_squash,sync) / 192.168.69.2(ro,root_squash,sync)
Mit 'ner windows Kiste im Netz würde ich samba einrichten. Ich habe aber keine Ahnung wie sich NFS mit windows verhält.
etc/hosts des statonären Rechners l3 (Suse 9.2, Problem kann den Rechner l1 und l2 bei der Konfiguration des nfs-Clients nicht sehen) # # hosts This file describes a number of hostname-to-address # mappings for the TCP/IP subsystem. It is mostly # used at boot time, when no name servers are running. # On small systems, this file can be used instead of a # "named" name server. # Syntax: # # IP-Address Full-Qualified-Hostname Short-Hostname #
127.0.0.1 localhost
# special IPv6 addresses
::1 localhost ipv6-localhost ipv6-loopback
fe00::0 ipv6-localnet
ff00::0 ipv6-mcastprefix ff02::1 ipv6-allnodes ff02::2 ipv6-allrouters ff02::3 ipv6-allhosts 192.168.69.3 l3.local.net l3 192.168.69.1 l1.local.net l1 192.168.69.2 l2.local.net l2
Mir ist das alles ein Rätsel
MfG Kris Pfeffer
[snip] Bliebe noch die /etc/fstab zu vergleichen Gruss, Roland -- Roland.Harke@gmx.de